Results for “Traffic Control” — Page 74

NASA NTRS2006

A Simple Two Aircraft Conflict Resolution Algorithm

Conflict detection and resolution methods are crucial for distributed air-ground traffic management in which the crew in, the cockpit, dispatchers in operation control centers sad and traffic controllers in the ground-based air traffic management facilities share information and participate in the traffic flow and traffic control functions. This paper describes a conflict detection, and a conflict resolution method. The conflict detection method predicts the minimum separation and the time-to-go to the closest point of approach by assuming that both the aircraft will continue to fly at their current speeds along their current headings. The conflict resolution method described here is motivated by the proportional navigation algorithm, which is often used for missile guidance during the terminal phase. It generates speed and heading commands to rotate the line-of-sight either clockwise or counter-clockwise for conflict resolution. Once the aircraft achieve a positive range-rate and no further conflict is predicted, the algorithm generates heading commands to turn back the aircraft to their nominal trajectories. The speed commands are set to the optimal pre-resolution speeds. Six numerical examples are presented to demonstrate the conflict detection, and the conflict resolution methods.

Chatterji, Gano B.↗

DOE OSTI2024

Integration of Decentralized Graph-Based Multi-Agent Reinforcement Learning with Digital Twin for Traffic Signal Optimization

Machine learning (ML) methods, particularly Reinforcement Learning (RL), have gained widespread attention for optimizing traffic signal control in intelligent transportation systems. However, existing ML approaches often exhibit limitations in scalability and adaptability, particularly within large traffic networks. This paper introduces an innovative solution by integrating decentralized graph-based multi-agent reinforcement learning (DGMARL) with a Digital Twin to enhance traffic signal optimization, targeting the reduction of traffic congestion and network-wide fuel consumption associated with vehicle stops and stop delays. In this approach, DGMARL agents are employed to learn traffic state patterns and make informed decisions regarding traffic signal control. The integration with a Digital Twin module further facilitates this process by simulating and replicating the real-time asymmetric traffic behaviors of a complex traffic network. The evaluation of this proposed methodology utilized PTV-Vissim, a traffic simulation software, which also serves as the simulation engine for the Digital Twin. The study focused on the Martin Luther King (MLK) Smart Corridor in Chattanooga, Tennessee, USA, by considering symmetric and asymmetric road layouts and traffic conditions. Comparative analysis against an actuated signal control baseline approach revealed significant improvements. Experiment results demonstrate a remarkable 55.38% reduction in Eco_PI, a developed performance measure capturing the cumulative impact of stops and penalized stop delays on fuel consumption, over a 24 h scenario. In a PM-peak-hour scenario, the average reduction in Eco_PI reached 38.94%, indicating the substantial improvement achieved in optimizing traffic flow and reducing fuel consumption during high-demand periods. These findings underscore the effectiveness of the integrated DGMARL and Digital Twin approach in optimizing traffic signals, contributing to a more sustainable and efficient traffic management system.

actuated signal control↗

DOE OSTI2024

Integration of Decentralized Graph-Based Multi-Agent Reinforcement Learning with Digital Twin for Traffic Signal Optimization

Machine learning (ML) methods, particularly Reinforcement Learning (RL), have gained widespread attention for optimizing traffic signal control in intelligent transportation systems. However, existing ML approaches often exhibit limitations in scalability and adaptability, particularly within large traffic networks. This paper introduces an innovative solution by integrating decentralized graph-based multi-agent reinforcement learning (DGMARL) with a Digital Twin to enhance traffic signal optimization, targeting the reduction of traffic congestion and network-wide fuel consumption associated with vehicle stops and stop delays. In this approach, DGMARL agents are employed to learn traffic state patterns and make informed decisions regarding traffic signal control. The integration with a Digital Twin module further facilitates this process by simulating and replicating the real-time asymmetric traffic behaviors of a complex traffic network. The evaluation of this proposed methodology utilized PTV-Vissim, a traffic simulation software, which also serves as the simulation engine for the Digital Twin. The study focused on the Martin Luther King (MLK) Smart Corridor in Chattanooga, Tennessee, USA, by considering symmetric and asymmetric road layouts and traffic conditions. Comparative analysis against an actuated signal control baseline approach revealed significant improvements. Experiment results demonstrate a remarkable 55.38% reduction in Eco_PI, a developed performance measure capturing the cumulative impact of stops and penalized stop delays on fuel consumption, over a 24 h scenario. In a PM-peak-hour scenario, the average reduction in Eco_PI reached 38.94%, indicating the substantial improvement achieved in optimizing traffic flow and reducing fuel consumption during high-demand periods. These findings underscore the effectiveness of the integrated DGMARL and Digital Twin approach in optimizing traffic signals, contributing to a more sustainable and efficient traffic management system.

42 ENGINEERING↗

NASA NTRS2021

Decentralized Control Synthesis for Air Traffic Management in Urban Air Mobility

Urban air mobility (UAM) refers to air transportation services within an urban area, often in an on-demand fashion. We study air traffic management (ATM) for vehicles in a UAM fleet, while guaranteeing system safety requirements such as traffic separation. Existing ATM methods for unmanned aerial systems, such as UAS traffic management, utilize alternative approaches which do not provide strict safety guarantees. No established infrastructure exists for providing ATM at scale for UAM. We provide a decentralized, hierarchical approach for UAM ATM that allows for scalability to high traffic densities as well as providing theoretical guarantees of correctness with respect to user-provided safety specifications. Our main contributions are two-fold. First, we propose a novel UAM ATM architecture that divides the control authority between vertihubs that are each in charge of all UAM vehicles in their local airspace. Each vertihub also contains a number of vertiports that are in charge of UAM vehicle takeoffs and landings. The resulting architecture is decentralized and hierarchical, which not only enables scalability, but also robustness in the event of any individual vertihub or vertiport no longer being operational. Second, we provide a contract-based correct-by-construction reactive synthesis approach that provably guarantees safety properties with respect to user-provided specifications in linear temporal logic. We demonstrate the approach on large-volume UAM air traffic data.

Urban Air Mobility↗

DOE OSTI2026

Automated Signal Timing Plan Reconstruction Using High-Resolution Event-Based Controller Data for Digital Twins

Transportation digital twins are essential tools for evaluating emerging technologies such as connected and automated vehicles, adaptive traffic signal control, and mobility optimization strategies. Realistic digital twins require accurate emulation of real-world signal controllers and detailed signal timing plans. However, signal timing plans are often unavailable or difficult to access, forcing researchers and modelers to rely on assumed fixed timings or halt their analysis. To overcome this challenge, we present a method that directly estimates signal timing plan parameters using high-resolution, event-based data from traffic signal controllers. The proposed method extracts key parameters, including cycle length, offset, phase sequence, coordinated phases, phase-specific minimum and maximum green durations, vehicle extensions, and splits under coordination. A rule-based deterministic signal timing reconstruction algorithm based on traffic signal operation rules, such as those outlined in the Signal Timing Manual, is developed and validated. We evaluate this method, which uses high-resolution controller event logs and verified signal timing plans, on 94 signalized intersections in Nashville, Tennessee, demonstrating their ability to generate accurate, simulation-ready signal timing plans for tools such as SUMO and Vissim.

Saroj, Abhilasha [ORNL] (ORCID:0000000191178063)↗

DOE OSTI2025

A Predictive Deep-Reinforcement-Learning-Based Connected Automated Vehicle Anticipatory Longitudinal Control in a Mixed Traffic Lane Change Condition

Maintaining safety and efficiency for mixed traffic consisting of connected automated vehicles (CAVs) and human-driven vehicles (HDVs) is an arduous task due to the inherent HDVs’ stochasticity. Especially for longitudinal control, which is the basic function of vehicle automation, prevailing research primarily considers CAV’s car-following control merely the acceleration and deceleration of leading vehicles. However, this approach overlooks the potential disruptions caused by surrounding vehicles executing lane changes, which can significantly impact the control vehicle’s stability and overall safety. Hence, our study introduces a predictive deep reinforcement learning (DRL) longitudinal CAV controller. This innovative approach leverages prediction from a physics-informed neural network as well as the control capability of DRL to better anticipate and mitigate issues arising from lane-changing, enhancing the safety and efficiency of CAVs in such scenarios. Finally, validated by the numerical simulations embedded with the real-world data, the results indicate that the proposed controller significantly enhances the safety and efficiency of CAVs in situations involving lane changes by other vehicles, showcasing its potential as a valuable tool in advancing CAV technology in mixed traffic.

33 ADVANCED PROPULSION SYSTEMS↗

DOE OSTI2026

Quantum Computing in Next-Generation Transportation Optimization

We explore how quantum computing (QC) can advance transportation optimization, with a focus on two high-impact areas: traffic signal control and vehicle electrification with grid integration. As transportation systems grow in complexity, classical optimization methods increasingly struggle to deliver scalable and efficient solutions, particularly for real-time, data-rich environments. This work identifies key challenges within these two domains where QC may offer advantages, particularly in handling combinatorial decision spaces and dynamic constraints. We begin by outlining the limitations of classical approaches for traffic signal control optimization and electric vehicle charging coordination, highlighting where computational limitations arise. Previous quantum formulations are presented and new formulations are proposed to demonstrate how emerging quantum algorithms, including quantum annealing and the Quantum Approximation Optimization Algorithm, could be leveraged to reformulate and address these problems. We also evaluate the suitability of current quantum hardware and discuss recent trends that indicate when QC may become a viable tool for transportation applications. While acknowledging the present limitations of QC technologies, this poster emphasizes the importance of preparing quantum-compatible models today. By reviewing and establishing formulations that align with the strengths of quantum algorithms, researchers and practitioners can better position themselves to take advantage of QC advancements as they occur. This work aims to provide a practical, forward-looking perspective on the near-term potential of quantum computing in transportation optimization.

33 ADVANCED PROPULSION SYSTEMS↗

DOE OSTI2023

Traffic Signal Optimization by Integrating Reinforcement Learning and Digital Twins

Machine learning (ML) methods, especially reinforcement learning (RL), have been widely considered for traffic signal optimization in intelligent transportation systems. Most of these ML methods are centralized, lacking in scalability and adaptability in large traffic networks. Further, it is challenging to train such ML models due to the lack of training platforms and/or the cost of deploying and training in a real traffic networks. This paper presents an approach for the integration of decentralized graph-based multi-agent reinforcement learning (DGMARL) with a Digital Twin (DT) to optimize traffic signals for the reduction of traffic congestion and network-wide fuel consumption related to stopping. Specifically, the DGMARL agents learn traffic state patterns and make decisions regarding traffic signal control with assistance from a Digital Twin module, which simulates and replicates the traffic behaviors of a real traffic network. The proposed approach was evaluated using PTV-Vissim [1], a microscopic traffic simulation platform. PTV-Vissim is also the simulation engine of the DT, enabling emulation and optimization of the traffic signals on the MLK Smart Corridor in Chattanooga, Tennessee. Compared to an actuated signal control baseline approach, experiment results show that Eco_PI, a developed performance measure capturing the impact of stops on fuel consumption, was reduced by 44.27% in a 24-hour and an average of 29.88% in a PM-peak-hour scenario.

Multi-Agent Reinforcement Learning, Digital Twin, ↗

NASA NTRS2019

Automated Scenario Generation for Meeting Human-in-the-Loop Simulation Requirements

A two-step automated Multi-Aircraft Control System traffic scenario generation process for Human-in-the-Loop evaluations of air traffic management concepts is described. The first step of the two-step process employs the scenario generation capability currently available in NASA's Air Traffic Management Testbed. The second step refines the scenario by filtering flights from the traffic scenario based on route length, cruise speed, cruise altitude, entry time and the desired ratio of internal to external flights. A solution for achieving the desired ratio of internal to external flights, where internal flights are shorter flights and external flights are longer flights based on a distance threshold, is described. Finally, schedulers are described for shaping the hourly arrival traffic count as a function of time in response to airport capacity constraint or for increasing the traffic demand with respect to the available arrival capacity. Results generated for arrival traffic to the four major airports in the New York Metroplex on a busy day using the two-step procedure are discussed. These results show that traffic scenarios for Multi-Aircraft Control System that meet the Human-in-the-Loop and fast-time simulation requirements can be created automatically following the procedures described in the paper. The automated process will improve the accuracy and efficiency by eliminating the tedious manual process for scenario generation.

Automated Scenario Generation↗

NASA NTRS2019

Automated Scenario Generation for Meeting Human-In-The-Loop Simulation Requirements

A two-step automated Multi-Aircraft Control System traffic scenario generation process for Human-in-the-Loop evaluations of air traffic management concepts is described. The first step of the two-step process employs the scenario generation capability currently available in NASA's Air Traffic Management Testbed. The second step refines the scenario by filtering flights from the traffic scenario based on route length, cruise speed, cruise altitude, entry time and the desired ratio of internal to external flights. A solution for achieving the desired ratio of internal to external flights, where internal flights are shorter flights and external flights are longer flights based on a distance threshold, is described. Finally, schedulers are described for shaping the hourly arrival traffic count as a function of time in response to airport capacity constraint or for increasing the traffic demand with respect to the available arrival capacity. Results generated for arrival traffic to the four major airports in the New York Metroplex on a busy day using the two-step procedure are discussed. These results show that traffic scenarios for Multi-Aircraft Control System that meet the Human-in-the-Loop and fast-time simulation requirements can be created automatically following the procedures described in the paper. The automated process will improve the accuracy and efficiency by eliminating the tedious manual process for scenario generation.

Automated Scenario Generation↗

NASA NTRS2018

Evaluation of Usability and Workload with Paper Strips as Compared to Virtual Flight Strips Used for Ramp Operations

This paper describes an experiment designed to compare the use of paper strips with the use of a new user interface, the Ramp Traffic Console (RTC), designed for use by ramp controllers to be used in place of paper strips. A Human-In-the-Loop (HITL) experiment was performed as the fifth study in a series of six HITL simulation experiments designed to evaluate a concept that provided advisories to the users. The RTC was designed to be used as a Decision Support Tool (DST) that provided advisories to ramp controllers regarding metering or pushback such that most of the delay was taken at the gate to save fuel and emissions. In addition to being a DST, an added benefit of the RTC is that it can provide real-time updates of flight data, airport and airspace status to the controller including Traffic Management Initiatives (TMI). The RTC was designed as new user interface that displays virtual strips on a terminal map drawn on a 27-inch touch screen monitor. The RTC was used in some conditions of the experiment by ramp controllers in place of paper strips and paper maps in the HITL environment. In other conditions the controllers were given paper strips and paper maps similar to what they currently use at Charlotte Douglas International Airport (CLT). The study described here, evaluated the use of the virtual strips displayed on the RTC as compared to the use of paper strips and paper map, using current ramp tower controllers at CLT as participants. The research question being asked was - How does management of ramp traffic affect user workload and usability ratings while using RTC to manage traffic in the ramp verses using paper strips? Workload for our purposes is defined by four components of the NASA-TLX (Task Load Index). Usability was assessed with two sets of usability questions - One set of usability questions addressed traffic management performance and the other set addressed issues of resources and efficiency. Both Post Run and Post Study questionnaire responses were gathered and the results were analyzed to assess controller workload and usability ratings under both conditions, virtual strips shown on RTC and Paper Strips. The results indicate that controllers perceived lower workload while using virtual strips displayed on RTC to manage ramp traffic. Usability ratings for Traffic management performance questions are lower in the virtual strip/RTC condition than in the paper strip condition showing a preference for RTC over Paper. Usability ratings for Resources and efficiency questions show mixed results. Additionally, the Post Study Questions show preference for RTC over paper strips. Results of this data analysis will be presented in this paper. This DST evaluation was an important step in researching and improving the tool, which was planned to be deployed in the field.

Aviation Decision Support Tools↗

NASA NTRS2018

A Markov Decision Process Framework for Optimal Airport Reconfiguration

The airport runway configuration is defined as a combination set of runways for arrivals and departures used at a point during operation of the airport. An optimal configuration of these runways depends on a number of factors, including traffic demand, wind magnitude and direction, other adverse weather conditions, and noise restrictions, among others. Based on the current state of these factors and predictions of traffic demand and weather conditions, runway configuration changes are made and coordinated between tower controller, other air traffic control facilities, pilots, and ground personnel. Reconfigurations can be quite disruptive to airport operations; minimizing their frequency and scheduling them well in advance is essential for mitigating some of the added workload for controllers and pilots. Unfortunately, deciding on an appropriate time to change is challenging for human decision makers. Not only do multiple factors need to be evaluated, but the uncertainty in their forecasts must also be considered. Previous optimization methods, such as mixed linear integer programming, have been proposed. Although these methods can reason over a large set of variables, they do not systematically handle the uncertainty associated with weather movement, traffic demands, and other variables. In this work, we introduce a Markov Decision Process (MDP)-based decision making framework which can reason effectively over the inherent uncertainties and make optimal decisions on if/when to change the airport configuration. In a prototype implementation, we present a single runway with three aircraft and utilize knowledge of the forecasted wind speed and direction to determine whether to keep or change the current runway configuration. Our aim through this work is to present a framework for airport reconfiguration which can be scalable to additional aircraft, multiple runways, and various input parameters. This technique will optimize the airport reconfiguration procedure by providing a proactive approach, optimizing not just at the next optimal opportunity for a reconfiguration based on varying atmospheric and traffic conditions in the terminal airspace, but also anticipating future necessary reconfigurations. This will eliminate the inefficiencies of frequent changes currently associated with runway reconfiguration procedures.

runway reconfiguration↗

NASA NTRS1985

Traffic scenario generation technique for piloted simulation studies

Piloted simulation studies of cockpit traffic display concepts require the development of representative traffic scenarios. With the exception of specific aircraft interaction issues, most research questions can be addressed using traffic scenarios consisting of prerecorded aircraft movements merged together to form a desired traffic pattern. Prerecorded traffic scenarios have distinct research advantages, allowing control of traffic encounters with repeatability of scenarios between different test subjects. A technique is described for generation of prerecorded jet transport traffic scenarios suitable for use in piloted simulation studies. Individual flight profiles for the aircraft in the scenario are created interactively with a computer program designed specifically for this purpose. The profiles are then time-correlated and merged into a complete scenario. This technique was used to create traffic scenarios for the Denver, Colorado area with operations centered at Stapleton International Airport. Traffic scenarios for other areas may also be created using this technique, with appropriate modifications made to the navigation fix locations contained in the flight profile generation program.

Williams, David H.↗

NASA NTRS2019

Cyber Physical Security (CPS) Extension to Air Traffic Management (ATM) Testbed

The Air Traffic Management (ATM) Testbed is being developed at NASA to enable benefit, impact, safety and cost assessments for accelerating the deployment of Concept and Technologies (C&T) in the National Airspace System (NAS). Today, C&T introduction into the NAS takes decades. The primary reason for this is an inability to assess the operational impact of the interaction between the proposed C&T and operationally deployed systems (Realistic Technologies) in terms of NAS-wide safety, traffic flow efficiency, roles and workload of controllers and traffic managers, and impact on airline fleet operations. Transition of C&T to operations requires mathematical modeling and simulation, Human-in-the-Loop (HITL) testing and shadow-mode evaluation driven by operational data. Whereas interaction with the operational system during testing and stages of deployment is not permissible due to safety concerns, it is certainly possible to create a simulation environment that closely mimics the NAS using the same operational systems/hardware for enabling such assessments. This presentation focuses on a proposed Cyber Physical Security extension to the ATM Testbed for creating a modeling and simulation architecture to study how well the Air Traffic Management system will perform and analyze effectiveness of mitigating security measures against particular cyber-attack scenarios.

Datta, Koushik↗

DOE OSTI2020

Energy Impact of Connected and Automated Vehicle Technologies. Final report

The overarching goal of this project is to understand the potential impact of connected and automated vehicles. The goal was achieved through data collection, model development, algorithm designs, simulations, and limited field tests. The main outcomes from this project include: (1) we collected energy consumption and GPS data from 500 vehicles over one year, with a total mileage of 8 million miles; (2) Based on the collected data and other datasets collected at the University of Michigan, we developed a calibrated Ann Arbor model in Polaris (model developed by ANL), and the fuel economy accuracy was found to be around 3.9% by comparison with field collected data; (3) An open-source SUMO model of Ann Arbor was developed; (4) Eco-Routing algorithms in Ann Arbor using the SUMO model shows 6% fuel saving potential; (5) Experiments conducted at the Mcity test facility shows that human drivers roughly follow the Eco-driving suggestions roughly 70% of the time; (6) Based in the Ann Arbor travel patterns, we found that each shared automated vehicle can replace around 4 individually owned vehicles; and (7) Adaptive Traffic Signal Control Algorithm developed through this project has been validated both in simulations and preliminary test results. For connected and automated vehicles, on average the performance is 13% delay reduction, and 10% fuel reduction. While connected and automated vehicles are in their early stage of deployment, the results from this project confirm that there is significant potential for energy saving if the technologies are developed and used properly. The three main technologies studied in this project include eco-routing, shared autonomous rides, and adaptive traffic signal controls. The data collected and model developed through the project can be used to study many other connected and automated vehicle technologies.

02 PETROLEUM↗

NASA NTRS1999

The Effect of Shared Information on Pilot/Controller And Controller/Controller Interactions

In order to respond to the increasing demand on limited airspace system resources, a number of applications of information technology have been proposed, or are under investigation, to improve the efficiency, capacity and reliability of ATM (Asynchronous Transfer Mode) operations. Much of the attention in advanced ATM technology has focused on advanced automation systems or decision aiding systems to improve the performance of individual Pilots or Controllers. However, the most significant overall potential for information technology appears to he in increasing the shared information between human agents such as Pilots, Controllers or between interacting Controllers or traffic flow managers. Examples of proposed shared information systems in the US include; Controller Pilot Databank Communication (CPDLC), Traffic Management Advisor (TMA); Automatic Dependent Surveillance (ADS); Collaborative Decision Making (CDM) and NAS Level Common Information Exchange. Air Traffic Management is fundamentally a human centered process consisting of the negotiation, execution and monitoring of contracts between human agents for the allocation of limited airspace, runway and airport surface resources. The decision processes within ATM tend to be Semistructured. Many of the routine elements in ATM decision making on the part of the Controllers or Pilots are well Structured and can be represented by well defined rules or procedures. However in disrupted conditions, the ATM decision processes are often Unstructured and cannot be reduced to a set of discrete rules. As a consequence, the ability to automate ATM processes will be limited and ATM will continue to be a human centric process where the responsibility and the authority for the negotiation will continue to rest with human Controllers and Pilots. The use of information technology to support the human decision process will therefore be an important aspect of ATM modernization. The premise of many of the proposed shared information systems is that the performance of ATM operations will improve with an increase in Shared Situation Awareness between agents (Pilots, Controller, Dispatchers). This will allow better informed control decisions and an improved ability to negotiate between agents. A common information basis may reduce communication load and may increase the level of collaboration in the decision process. In general, information sharing is expected to have advantages for all agents within the system. However there are important questions which remain to be,addressed. For example: What shared information is most important for developing effective Shared Situation Awareness? Are there issues of information saturation? Does information parity create ambiguity in control authority? Will information sharing induce undesirable or unstable gaming behavior between agents? This paper will explore the effect of current and proposed information sharing between different ATM agents. The paper will primarily concentrate on bilateral tactical interactions between specific agents (Pilot/Controller; Controller/Controller; Pilot/Dispatcher; Controller/Dispatcher) however it will also briefly discuss multilateral interaction and more strategic interactions.

Hansman, R. John↗

NASA NTRS2013

Control of Future Air Traffic Systems via Complexity Bound Management

The complexity of the present system for managing air traffic has led to "discreteness" in approaches to creating new concepts: new concepts are created as point designs, based on experience, expertise, and creativity of the proposer. Discrete point designs may be highly successful but they are difficult to substantiate in the face of equally strong substantiation of competing concepts, as well as the state of the art in concept evaluation via simulations. Hybrid concepts may present a compromise - the golden middle. Yet a hybrid of sometimes in principle incompatible concepts forms another point design that faces the challenge of substantiation and validation. We are faced with the need to re-design the air transportation system ab initio. This is a daunting task, especially considering the problem of transitioning from the present system to any fundamentally new system. However, design from scratch is also an opportunity to reconsider approaches to new concept development. In this position paper we propose an approach, Optimized Parametric Functional Design, for systematic development of concepts for management and control of airspace systems, based on optimization formulations in terms of required system functions and states. This reasoning framework, realizable in the context of ab initio system design, offers an approach to deriving substantiated airspace management and control concepts. With growing computational power, we hope that the approach will also yield a methodology for actual dynamic control of airspace

Alexandrov, Natalia↗

DOE OSTI2023

"Traffic smoothing using explicit local controllers"

The dissipation of stop-and-go waves attracted recent attention as a traffic management problem, which can be efficiently addressed by automated driving. As part of the 100 automated vehicles experiment named MegaVanderTest, feedback controls were used to induce strong dissipation via velocity smoothing. More precisely, a single vehicle driving differently in one of the four lanes of I-24 in the Nashville area was able to regularize the velocity profile by reducing oscillations in time and velocity differences among vehicles. Quantitative measures of this effect were possible due to the innovative I-24 MOTION system capable of monitoring the traffic conditions for all vehicles on the roadway. This paper presents the control design, the technological aspects involved in its deployment, and, finally, the results achieved by the experiment.

Hayat, Amaury↗