Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Supportability”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,333 records · Page 74

Single‐Site, Single‐Metal‐Atom, Heterogeneous Electrocatalyst: Metal–Organic‐Framework Supported Molybdenum Sulfide for Redox Mediator‐Assisted Hydrogen Evolution Reaction

Abstract Synthesis of single‐site catalysts, whereby the local structure and surrounding chemical environments are identical, has been challenging, particularly in heterogeneous catalysis, as the support often presents spectrum of chemically distinct binding sites. Yet, the above criteria are crucial in attributing the apparent catalytic performance to the structural motif. The presented work augments on our previous work using monometallic molybdenum sulfide tethered within a zirconium‐based metal‐organic framework (MOF), NU‐1000; the monometallic nature enables all presented sites to be catalytically addressable. As the molybdenum sulfide species resided within two distinct pores (micro‐ and mesopores) of the MOF support, we have imparted uniformity in the local chemical environment by reducing the pore heterogeneity down to a single mesopore. Single‐site and single‐atom nature of the candidate catalyst was established via X‐ray diffraction measurements. Redox mediators were implemented, which, under reductive potentials, provide reduced species; they can effectively deliver the necessary reducing equivalences to the catalytic units that can otherwise not be addressed electrochemically due to the low electron mobility within the framework. Our results indicate the micropore‐allocated molybdenum sulfide is approximately four times more active as that in mesopores, whereas its catalytic mechanism is identical, underscoring the importance of controlling chemical environment beyond the active site.

Noh, Hyunho↗

Theoretical Investigation of the Oxygen Reduction Reaction over Platinum Catalysts Supported by Multi-Edged Vertically Aligned Carbon Nanofiber for Electrocatalyst Preparation

Vertically aligned carbon nanofibers (VACNFs) are promising supports for oxygen reduction reaction (ORR) electrocatalysts in fuel cells. Although experimentally these catalytic systems have shown great potential, there is lack of molecular understanding of the catalytic sites and reaction mechanisms. This work investigated the origin of the ORR reactivities of the platinum catalysts on multi-edged VACNFs (Pt/VACNF) using a multiscale modeling approach combining Density Functional Theory (DFT) and classical Molecular Dynamics (MD) simulations. Based on the ReaxFF potential, here all nanoscale Pt particles (Pt 55 , P 100 , and Pt 147 ) are stabilized by the open edges located axially along the VACNF walls. The calculated first-shell coordination numbers, CN, of surface Pt atoms are 6.63, 7.27, and 7.85, respectively, suggesting that the percentage of low coordination sites increases as the particle size decreases. The adsorption energies of OOH, O, and OH on Pt-55 were systematically probed using DFT calculations. These adsorption energies retain a linear correlation against the generalized coordination numbers ($\overline{CN}$). For Pt nanoparticles supported on VACNF, we found that the OOH and OH bind stronger than on Pt (111) by 0.14 and 0.17 eV, respectively, which can hinder the ORR activity with lower limiting potential than Pt (111). Our theoretical prediction is in good agreement with the linear sweeping voltammetry that revealed a left shift of the half-wave potential.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Enhancing NO Reduction by CO Over NiO/CeO 2 Catalyst by Optimizing the Metal Oxide–Support Interaction

Noble metal catalysts are widely used in three-way catalysts (TWCs) due to their high efficiency, but their scarcity and high cost drive the need for effective, low-cost alternatives. Here, in this work, a series of NiO/CeO 2 catalysts were engineered by modulating the OH content and crystallite size of the CeO 2 support. This approach yielded Ni species ranging from isolated single atoms to small clusters and larger aggregates, with varied NiO/CeO 2 interaction strengths. Evaluation of their performance in NO reduction by CO, CO oxidation, and the water–gas shift reaction revealed that the NiO/CeO 2 -300 catalyst, featuring small CeO 2 crystallites and highly dispersed NiO clusters, delivered superior activity for NO reduction and CO oxidation. It was demonstrated that small NiO clusters, due to their efficient CO adsorption and activation, were more active than Ni single atoms. Furthermore, the presence of water was found to influence the catalyst stability, with NiO clusters less stable than single atoms likely due to the hydroxylation effect leading to the formation of Ni(OH) 2 . Oxygen storage capacity measurements revealed that performance was governed by a combination of CeO 2 crystallite size and the abundance of NiO/CeO 2 interfaces. These findings demonstrated that the catalytic performance of Ni/CeO 2 systems could be maximized by optimizing the Ni nanostructure and its interaction with CeO 2 support, positioning them as a promising, multifunctional nonprecious alternative for three-way catalysis application.

36 MATERIALS SCIENCE↗

Phosphorene‐Supported Transition‐Metal Dimer for Effective N 2 Electroreduction

Abstract The electrochemical reduction of N 2 to NH 3 at ambient conditions is a promising alternative to the energy‐intensive, high‐temperature, high‐pressure Haber‐Bosch process. But it is extremely challenging to find an electrocatalyst that can effectively activate N 2 and reduce it to NH 3 . From first principles density functional theory, we found that the Ti dimer supported on single‐layer phosphorene can be used as a promising electrocatalyst for N 2 capture and conversion to NH 3 . The overpotential (relative to the standard hydrogen electrode) was found to be as low as 0.20, much lower than those predicted on the Ti surface (1 to 1.5 V) or their nitrides (0.5 to 1 V). In addition, we found that hydride is involved in the N 2 reduction on the Ti dimer catalyst via formation of Ti 2 ‐H species, and the hydride would favorably transfer onto the adsorbed N 2 * to form *NNH intermediate and further reduced to NH 3 . Moreover, we also examined other first‐row transition metal dimers, and found that Sc and Fe dimer to be potential catalysts which could catalyze N 2 reduction at a low overpotential of about 0.21 and 0.45 V, respectively. Our predictions hence suggest Ti, Sc and Fe dimer clusters supported on phosphorene as promising electrocatalysts for N 2 reduction to NH 3 .

Tang, Qing↗

Methane Chemisorption on Oxide‐Supported Pt Single Atom

Abstract Methane chemisorption has been recently demonstrated on the rutile IrO 2 (110) surface. However, it remains unclear how the general requirements are for methane chemisorption or complexation with a single atom on an oxide surface. By exploring methane adsorption on Pt 1 substitutionally doped on many rutile‐type oxides using hybrid density functional theory, we show that the occupancy of the Pt d z 2 orbital is the key to methane chemisorption. Pt single atom on the semiconducting or wide‐gap oxides such as TiO 2 and GeO 2 strongly chemisorbs methane, because the empty Pt d z 2 orbital is located in the gap and can effectively accept σ‐electron donation from the methane C−H bond. In contrast, Pt single atom on metallic oxides such as IrO 2 and RuO 2 does not chemisorb methane, because the Pt d z 2 orbital strongly mixes with the support‐oxide electronic states and become more occupied, losing its ability to chemisorb methane. This study sheds further light on the impact of the interaction between a Pt single atom and the oxide support on methane adsorption.

Fung, Victor↗

A cellular selection identifies elongated flavodoxins that support electron transfer to sulfite reductase

Flavodoxins (Flds) mediate the flux of electrons between oxidoreductases in diverse metabolic pathways. To investigate whether Flds can support electron transfer to a sulfite reductase (SIR) that evolved to couple with a ferredoxin, we evaluated the ability of Flds to transfer electrons from a ferredoxin-NADP reductase (FNR) to a ferredoxin-dependent SIR using growth complementation of an Escherichia coli strain with a sulfur metabolism defect. We show that Flds from cyanobacteria complement this growth defect when coexpressed with an FNR and an SIR that evolved to couple with a plant ferredoxin. When we evaluated the effect of peptide insertion on Fld-mediated electron transfer, we observed a sensitivity to insertions within regions predicted to be proximal to the cofactor and partner binding sites, while a high insertion tolerance was detected within loops distal from the cofactor and within regions of helices and sheets that are proximal to those loops. Bioinformatic analysis showed that natural Fld sequence variability predicts a large fraction of the motifs that tolerate insertion of the octapeptide SGRPGSLS. In conclusion, these results represent the first evidence that Flds can support electron transfer to assimilatory SIRs, and they suggest that the pattern of insertion tolerance is influenced by interactions with oxidoreductase partners.

59 BASIC BIOLOGICAL SCIENCES↗

NiFe Nanoparticle Nest Supported on Graphene as Electrocatalyst for Highly Efficient Oxygen Evolution Reaction

Abstract Designing cost‐efffective electrocatalysts for the oxygen evolution reaction (OER) holds significant importance in the progression of clean energy generation and efficient energy storage technologies, such as water splitting and rechargeable metal–air batteries. In this work, an OER electrocatalyst is developed using Ni and Fe precursors in combination with different proportions of graphene oxide. The catalyst synthesis involved a rapid reduction process, facilitated by adding sodium borohydride, which successfully formed NiFe nanoparticle nests on graphene support (NiFe NNG). The incorporation of graphene support enhances the catalytic activity, electron transferability, and electrical conductivity of the NiFe‐based catalyst. The NiFe NNG catalyst exhibits outstanding performance, characterized by a low overpotential of 292.3 mV and a Tafel slope of 48 mV dec −1 , achieved at a current density of 10 mA cm − 2 . Moreover, the catalyst exhibits remarkable stability over extended durations. The OER performance of NiFe NNG is on par with that of commercial IrO 2 in alkaline media. Such superb OER catalytic performance can be attributed to the synergistic effect between the NiFe nanoparticle nests and graphene, which arises from their large surface area and outstanding intrinsic catalytic activity. The excellent electrochemical properties of NiFe NNG hold great promise for further applications in energy storage and conversion devices.

Chemistry↗

Decision-making Framework to Support the End-of-Life Management of High-Activity Radioactive Sources

Sealed radioactive sources are used for an extremely wide range of purposes, including as radiation sources in various nuclear facilities, universities, hospitals, biomedical and industrial applications, as well as for geological prospecting and exploration. The proper management of these sealed radioactive sources once they have reached their end-of-life is still a global challenge. Very few field-tested Mobile Hot Cells (MHC) exist in the world to support the end-of-life management of disused high-activity radioactive sources. One of the critical challenges that a source recovery team encounters on each site is to find adequate space, and access to that space to complete the staging and recapture process with a MHC; this process is tedious, uncertain, and time-consuming. Therefore, it is essential to understand the planning and management of the MHC setup and takedown. Currently, there isn't an single capable planning tool that will provide an effective medium to plan, inform, educate, and communicate knowledge about the environment where the MHC will be deployed. We present a novel approach for the planning and management of the deployment of the MHC to several different sites that relies on technology. Furthermore, this planning tool will support collaboration, promote information sharing, and foster better decision making processes, resulting in a more efficient, and reliable setup and source recovery with the MHC.

61 RADIATION PROTECTION AND DOSIMETRY↗

Scalable distributed consensus to support MPI fault tolerance.

As system sizes increase, the amount of time in which an application can run without experiencing a failure decreases. Exascale applications will need to address fault tolerance. In order to support algorithm-based fault tolerance, communication libraries will need to provide fault-tolerance features to the application. One important fault-tolerance operation is distributed consensus. This is used, for example, to collectively decide on a set of failed processes. This paper describes a scalable, distributed consensus algorithm that is used to support new MPI fault-tolerance features proposed by the MPI 3 Forum's fault-tolerance working group. The algorithm was implemented and evaluated on a 4,096-core Blue Gene/P. The implementation was able to perform a full-scale distributed consensus in 305 {mu}s and scaled logarithmically.

99 GENERAL AND MISCELLANEOUS↗

Aquatic Nuisance Species in the Great Lakes and Mississippi River Basin—A Risk Assessment in Support of GLMRIS

The U.S. Army Corps of Engineers (USACE) is conducting the Great Lakes and Mississippi River Interbasin Study (GLMRIS) to determine the aquatic nuisance species (ANS) currently established in either the Mississippi River Basin (MRB) or the Great Lakes Basin (GLB) that pose the greatest risk to the other basin. The GLRMIS study focuses specifically on ANS transfer through the Chicago Area Waterway System (CAWS), a multi-use waterway connecting the two basins. In support of GLMRIS, we conducted a qualitative risk assessment for 34 ANS in which we determined overall risk level for four time intervals over a 50-year period of analysis based on the probability of ANS establishing in a new basin and the environmental, economic, and sociopolitical consequences of their establishment. Probability of establishment and consequences of establishment were assigned qualitative ratings of high, medium, or low and establishment and consequence ratings were then combined into an overall risk rating. Over the 50-year period of analysis, seven species were characterized as posing a medium risk and two species as posing a high risk to the MRB. Three species were characterized as posing a medium risk to the GLB, but no high-risk species were identified for this basin. Based on the time frame in which these species were considered likely to establish in the new basin, risk increased over time for some ANS. Identifying and prioritizing ANS risk supported the development and evaluation of multiple control alternatives that could reduce the probability of interbasin ANS transfer. However, both species traits and the need to balance multiple uses of the CAWS make it difficult to design cost-efficient and socially acceptable controls to reduce the probability of ANS transfer between the two basins.

54 ENVIRONMENTAL SCIENCES↗

Fabrication of Graphene-Supported Palladium Nanoparticles-Decorated Zinc Oxide Nanorods for Potential Application

We report the facile synthesis of graphene-supported palladium (Pd) nanoparticles anchored zinc oxide nanorods (Pd-ZnO/G) by the sol-gel method. X-ray diffraction (XRD) pattern confirmed the hexagonal wurtzite crystal structure (with P6{sub 3}mc phase) of Pd-ZnO/G nanorods similar to ZnO structure. X-ray diffraction results showed that graphene-supported Pd nanoparticles anchored on ZnO nanorods increases the average crystallite size of ZnO nanorods. Field emission scanning electron microscopy (FESEM) revealed the successful anchoring of Pd nanoparticles on the surface of ZnO/G nanorods. X-ray spectroscopy (XPS) was used to obtain the different oxidation state and surface compositional details of nanorods. Energy dispersive spectroscopy analysis confirmed the presence of palladium, carbon, and oxygen in Pd-ZnO/G structure. The optical absorption measurement indicates that after graphene and palladium doping, it shifted towards the low wavelength region for Pd-ZnO/G structure and high wavelength region in the case of ZnO/G nanostructure. Magnetic measurement showed that the saturation magnetization of Pd nanoparticles anchored nanorods increased when compared with that of ZnO/G and ZnO nanorods.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Catalyst Structure-Performance Relationship Identified by High-Throughput Operando Method: New Insight for Silica-Supported Vanadium Oxide for Methanol Oxidation

A prototype high throughput operando reactor, that integrates FT-IR imaging for rapid reaction product analysis and parallel Raman imaging for catalyst characterization, has been designed to accelerate catalyst discovery and, concurrently, fundamental research toward reliable correlations between catalyst active sites and catalyst performance for at-line real catalytic conditions. This reactor, consisting of six parallel reaction channels, is demonstrated for methanol oxidation using silica supported vanadium oxide catalysts at various reaction conditions. The results of semi-quantitative analysis of a large array of operando Raman scattering bands, specifically for C-H bonds in Si-OCH3 and V-OCH3 surface intermediates, obtained simultaneously on multiple catalyst surfaces with a time resolution of 60s for each set at different temperatures, reveal for the first time methanol activation at surface vanadium oxide cluster edge on silica support at lower reaction temperatures, <175°C. This activation phenomenon is not observed at a higher reaction temperature, 225°C.

10 SYNTHETIC FUELS↗

Palladium Catalysts for Fatty Acid Deoxygenation: Influence of the Support and Fatty Acid Chain Length on Decarboxylation Kinetics

Supported metal catalysts containing 5 wt% Pd on silica, alumina, and activated carbon were evaluated for liquid-phase deoxygenation of stearic (octadecanoic), lauric (dodecanoic), and capric (decanoic) acids under 5 % H-2 at 300 A degrees C and 15 atm. On-line quadrupole mass spectrometry (QMS) was used to measure CO + CO2 yield, CO2 selectivity, H-2 consumption, and initial decarboxylation rate. Post-reaction analysis of liquid products by gas chromatography was used to determine n-alkane yields. The Pd/C catalyst was highly active and selective for stearic acid (SA) decarboxylation under these conditions. In contrast, SA deoxygenation over Pd/SiO2 occurred primarily via decarbonylation and at a much slower rate. Pd/Al2O3 exhibited high initial SA decarboxylation activity but deactivated under the test conditions. Similar CO2 selectivity patterns among the catalysts were observed for deoxygenation of lauric and capric acids; however, the initial decarboxylation rates tended to be lower for these substrates. The influence of alkyl chain length on deoxygenation kinetics was investigated for a homologous series of C-10-C-18 fatty acids using the Pd/C catalyst. As fatty acid carbon number decreases, reaction time and H-2 consumption increase, and CO2 selectivity and initial decarboxylation rate decrease. The increase in initial decarboxylation rates for longer chain fatty acids is attributed to their greater propensity for adsorption on the activated carbon support.

Ford, JP↗

Elements of an environmental decision support system for seasonal wetland salt management in a river basin subjected to water quality regulation

Seasonally managed wetlands in the Grasslands Basin on the west-side of California's San Joaquin Valley provide food and shelter for migratory wildfowl during winter months and sport for waterfowl hunters during the annual duck season. Surface water supply to these wetlands contain salt which, when drained to the San Joaquin River during the annual drawdown period, can negatively impact water quality and cause concern to downstream agricultural riparian water diverters. Recent environmental regulation, limiting discharges salinity to the San Joaquin River and primarily targeting agricultural non-point sources, now also targets return flows from seasonally managed wetlands. Real-time water quality management has been advocated as a means of continuously matching salt loads discharged from agricultural, wetland and municipal operations to the assimilative capacity of the San Joaquin River. Past attempts to build environmental monitoring and decision support systems (EDSS's) to implement this concept have enjoyed limited success for reasons that are discussed in this paper. These reasons are discussed in the context of more general challenges facing the successful implementation of a comprehensive environmental monitoring, modelling and decision support system for the San Joaquin River Basin.

54 ENVIRONMENTAL SCIENCES↗

Influence of Sulfur on the Carbon Deposition in Liquid Hydrocarbon Steam Reforming over CeO2-Al2O3 supported Ni and Rh Catalysts

This study was performed to elucidate the influence of sulfur on the carbon deposition in steam reforming of liquid hydrocarbons over CeO{sub 2}-Al{sub 2}O{sub 3} supported Ni and Rh catalysts at 800 C. The characteristics of the carbon deposits on the used catalysts after the reactions without and with sulfur were investigated by temperature-programmed oxidation (TPO), transmission electron microscopy (TEM), scanning transmission X-ray microscopy (STXM), temperature-programmed hydrogenation (TPH), X-ray absorption near edge structure (XANES), and scanning electron microscopy (SEM). Though abundant carbon deposits can accumulate on the pure CeO{sub 2}-Al{sub 2}O{sub 3} support due to fuel thermal cracking, the addition of Ni or Rh metal greatly reduced the carbon deposition in the sulfur-free reaction. The presence of sulfur increased the carbon deposition on both catalysts, which has a much more significant impact for the Ni catalyst. Carbon XANES study on the used catalysts revealed that graphitic carbon was dominant in the presence of sulfur, while oxidized carbon species (quinone-like carbon, carboxyl and carbonate) prevailed without sulfur. Meanwhile, the formation of carboxyl and carbonate more dramatically dropped on the Ni catalyst than that on the Rh catalyst. Our results strongly suggest that (I) the presence of sulfur can suppress carbon gasification and promote the formation of graphitic carbon on reforming catalysts due mainly to its poisoning effect on metals, and (II) Rh catalyst possesses stronger capability to maintain carbon gasification activity than Ni catalyst in the presence of sulfur.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

On the nature of the deactivation of supported palladium nanoparticle catalysts in the decarboxylation of fatty acids.

Supported palladium catalysts are effective catalysts for the hydrogen-free decarboxylation of fatty acids. However, the catalysts deactivate severely after one use. Here, the recyclability of a well-defined, mesoporous silica-supported palladium nanoparticle catalyst is evaluated in the batch decarboxylation of stearic acid at 300 C under inert atmosphere, producing n-heptadecane. The nature of the catalyst deactivation is examined in detail via an array of characterization techniques. X-ray photoelectron spectroscopy (XPS) demonstrates that little palladium surface oxidation occurs over the course of the reaction, and a combination of X-ray absorption spectroscopy and transmission electron microscopy (TEM) suggests negligible particle sintering or agglomeration. Physisorption and chemisorption measurements demonstrate substantial loss in total surface area and porosity as well as accessible palladium surface area with these losses attributed to significant organic deposition on the catalyst, as verified via thermogravimetric analysis. High temperature calcination is applied to combust and remove these residues, but resultant nanoparticle agglomeration is significant. Solid state nuclear magnetic resonance spectroscopy (NMR), Fourier transform infrared spectroscopy (FT-IR) and solid dissolution followed by organic extraction methodologies demonstrate that the carbonaceous deposits are not coke but rather strongly adsorbed reactants and products. Detrimental coke formation, as suggested by prior literature, is verified to be absent, as extraction of the surface-deposited organic species yields nearly complete recovery of the total surface area, pore volume, and active palladium surface area. Furthermore, the regenerated catalyst exhibits a corresponding significant recovery of decarboxylation activity.

60 APPLIED LIFE SCIENCES↗

Influence of H 2 O and H 2 S on the composition, activity, and stability of sulfided Mo, CoMo, and NiMo supported on MgAl 2 O 4 for hydrodeoxygenation of ethylene glycol

Here in this work, density functional theory (DFT), catalytic activity tests, and in-situ X-ray absorption spectroscopy (XAS) was performed to gain detailed insights into the activity and stability of MoS 2 , Ni-MoS 2 , and Co-MoS 2 catalysts used for hydrodeoxygenation (HDO) of ethylene glycol upon variation of the partial pressures of H 2 O and H 2 S. The results show high water tolerance of the catalysts and highlight the importance of promotion and H 2 S level during HDO. DFT calculations unraveled that the active edge of MoS 2 could be stabilized against SO exchanges by increasing the partial pressure of H 2 S or by promotion with either Ni or Co. The Mo, NiMo, and CoMo catalysts of the present study were all active and fairly selective for ethylene glycol HDO at 400 °C, 27 bar H 2 , and 550–2200 ppm H 2 S, and conversions of ≈50–100%. The unpromoted Mo/MgAl 2 O 4 catalyst had a lower stability and activity per gram catalyst than the promoted analogues. The NiMo and CoMo catalysts produced ethane, ethylene, and C1 cracking products with a C 2 /C 1 ratio of 1.5–2.0 at 550 ppm H 2 S. This ratio of HDO to cracking could be increased to ≈2 at 2200 ppm H 2 S which also stabilized the activity. Removing H 2 S from the feed caused severe catalyst deactivation. Both DFT and catalytic activity tests indicated that increasing the H 2 S concentration increased the concentration of SH groups on the catalyst, which correspondingly activated and stabilized the catalytic HDO performance. In-situ XAS further supported that the catalysts were tolerant towards water when exposed to increasing water concentration with H2O/H2S ratios up to 300 at 400–450 °C. Raman spectroscopy and XAS showed that MoS2 was present in the prepared catalysts as small and highly dispersed particles, probably owing to a strong interaction with the support. Linear combination fitting (LCF) analysis of the X-ray absorption near edge structure (XANES) spectra obtained during in-situ sulfidation showed that Ni was sulfided faster than Mo and CoMo, and that Mo was sulfided faster when promoted with Ni. Extended X-ray absorption fine structure (EXAFS) results showed the presence of MoS 2 in all sulfided catalysts. Lastly, sulfided CoMo was present as a mixture of CoMoS and Co 9 S 8 , whereas sulfided NiMo was present as NiMoS.

09 BIOMASS FUELS↗

Reverse water-gas shift: Na doping of m-ZrO 2 supported Pt for selectivity control

Reverse water-gas shift (RWGS) is a vital step in producing syngas for the chemical conversion of CO 2 to liquid transportation fuels and chemicals. Na-doping of m-ZrO 2 supported Pt catalysts allowed selectivity control by systematically increasing the ratio of relative rates of r CO /r CH4 . This was achieved by facilitating the formation of formate intermediate species, which precedes CO formation, and by suppressing the metallic Pt 0 active sites responsible for CH 4 formation. Here, a 2.5%Na-2%Pt/m-ZrO 2 catalyst was first tested for the forward water-gas shift (FWGS) reaction and found to have 50% higher CO conversion at 285°C compared to the undoped catalyst. Results of DRIFTS spectroscopy of adsorbed CO confirmed a formate ν(CH) band shift to lower wavenumbers (2870–2802 cm —1 ) with the addition of Na and more rapid forward formate decomposition in steam to H 2 and carbonate species, the precursor to CO 2 . This is consistent with C-H bond breaking being the rate limiting step of a FWGS mechanism occurring at the metal-support junction. Consistent with this, DRIFTS of RWGS in 4%CO 2 + 60%H 2 showed more facile formation of formate for the Na-doped catalyst and, once again, the ν(CH) band was shifted to lower wavenumbers (2874–2803 cm —1 ) with Na-doping. In addition, Na doping resulted in a systematic decrease in the Pt-carbonyl band in DRIFTS of adsorbed CO as well as DRIFTS of in-situ RWGS reaction tests, suggesting that Na blocked a fraction of on-top Pt sites, breaking up ensembles of Pt 0 responsible for methanation. The selectivity of the 2.5%Na-doped catalyst, unlike its undoped counterpart, was remarkably resistant to methanation (e.g., selectivity < 0.2% CH 4 with pressures of up to 20 bar).

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗