Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Stokes flow”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,333 records · Page 74
All sourcesNASA NTRSDOE OSTI
NASA NTRS1989

Navier-Stokes Solutions about the F/A-18 Forebody-LEX Configuration

Three-dimensional viscous flow computations are presented for the F/A-18 forebody-LEX geometry. Solutions are obtained from an algorithm for the compressible Navier-Stokes equations which incorporates an upwind-biased, flux-difference-splitting approach along with longitudinally-patched grids. Results are presented for both laminar and fully turbulent flow assumptions and include correlations with wind tunnel as well as flight-test results. A good quantitative agreement for the forebody surface pressure distribution is achieved between the turbulent computations and wind tunnel measurements at Mach number of 0.6. The computed turbulent surface flow patterns on the forebody qualitatively agree well with in-flight surface flow patterns obtained on an F/A-fS aircraft at Mach number of 0.34.

Transitional flow↗
NASA NTRS1992

A comparative study of the effects of inhibitor stub length on solid rocket motor combustion chamber pressure oscillations: RSRM at T = 80 seconds, preliminary results

Results from a continuing, time-accurate computational study of the combustion gas flow inside the Space Shuttle Redesigned Solid Rocket Motor (RSRM) are presented. These computational fluid dynamic (CFD) analyses duplicate unsteady flow effects which interact in the RSRM to produce pressure oscillations, and resulting thrust oscillations, at nominally 15, 30, and 45 Hz. Results of the Navier-Stokes computations made at mean pressure and flow conditions corresponding to 80 seconds after motor ignition both with and without a protruding, rigid inhibitor at the forward joint cavity are presented here.

Chasman, D.↗
NASA NTRS2005

Mimicking Natural Laminar to Turbulent Flow Transition: A Systematic CFD Study Using PAB3D

For applied aerodynamic computations using a general purpose Navier-Stokes code, the common practice of treating laminar to turbulent flow transition over a non-slip surface is somewhat arbitrary by either treating the entire flow as turbulent or forcing the flow to undergo transition at given trip locations in the computational domain. In this study, the possibility of using the PAB3D code, standard k-epsilon turbulence model, and the Girimaji explicit algebraic stresses model to mimic natural laminar to turbulent flow transition was explored. The sensitivity of flow transition with respect to two limiters in the standard k-epsilon turbulence model was examined using a flat plate and a 6:1 aspect ratio prolate spheroid for our computations. For the flat plate, a systematic dependence of transition Reynolds number on background turbulence intensity was found. For the prolate spheroid, the transition patterns in the three-dimensional boundary layer at different flow conditions were sensitive to the free stream turbulence viscosity limit, the reference Reynolds number and the angle of attack, but not to background turbulence intensity below a certain threshold value. The computed results showed encouraging agreements with the experimental measurements at the corresponding geometry and flow conditions.

Pao, S. Paul↗
NASA NTRS1990

Numerical investigation of laminar-turbulent transition in a flat plate wake

Lamina-turbulent transition of high-deficit flat plate wakes is investigated by direct numerical simulations using the complete Navier Stokes equations. The simulations are based on a spatial model so that both the base flow and the disturbance flow can develop in the downstream direction. The Navier Stokes equations are used in a vorticity-velocity form and are solved using a combination of finite difference and spectral approximations. Fourier series are used in the spanwise direction. Second-order finite-differences are used to approximate the spatial derivatives in the streamwise and transverse directions. For the temporal discretion, a combination of ADI, Crank-Nicolson, and Adams-Bashforth methods is employed. The discretized velocity equations are solved using fast Helmholtz solvers. Code validation is accomplished by comparison of the numerical results to both linear stability and to experiments. Calculations of two- and/or three-dimensional sinuous and mode disturbances in the wake of flat plate are undertaken. For calculations of two-dimensional disturbances, the wake is forced at an amplitude level so that nonlinear disturbance development may be observed. In addition, the forcing amplitude is varied in order to determine its effect on the disturbance behavior. To investigate the onset of three-dimensionality, the wake is forced with a small-amplitude three-dimensional disturbance and a larger amplitude two-dimensional disturbance. The two-dimensional forcing amplitude is varied in order to determine its influence on the three-dimensional flow field.

Fasel, Hermann F.↗
DOE OSTI2025

Dominant balance-based adaptive mesh refinement for incompressible fluid flows

This work introduces a novel adaptive mesh refinement (AMR) method that utilizes dominant balance analysis (DBA) for efficient and accurate grid adaptation in computational fluid dynamics (CFD) simulations. The proposed method leverages a Gaussian mixture model (GMM) to classify grid cells into active and passive regions based on the dominant physical interactions within the equation space. By modeling truncation error probabilistically from discretized terms, the method identifies regions of high interaction where numerical accuracy is most sensitive to resolution. Unlike traditional AMR strategies, this approach does not rely on heuristic-based sensors or user-defined thresholds, providing a fully automated and problem-independent framework for AMR. Applied to the incompressible Navier-Stokes equations for steady and unsteady flow past a cylinder, the DBA-based AMR method achieves comparable accuracy to high-resolution grids while reducing computational costs by up to 70 %. The validation highlights the method’s effectiveness in capturing complex flow features while minimizing grid cells, directing computational resources toward regions with the most critical dynamics. This modular and scalable strategy is adaptable to a wide range of applications, presenting a promising tool for efficient high-fidelity simulations in CFD and other multiphysics domains.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
NASA NTRS1978

Numerical solution of flow problems using body-fitted coordinate systems

The technique of boundary-fitted coordinate systems is based on a method of automatic numerical generation of a general curvilinear coordinate system having a coordinate line coincident with each boundary of a general multi-connected region containing any number of arbitrarily shaped bodies. Once the curvilinear coordinate system is generated, any partial differential system of interest can be solved on this coordinate system by transforming the equations and solving the resulting system in finite difference approximation on the rectangular transformed plane. This method of automatic body-fitted curvilinear coordinate generation is used to construct finite-difference solutions of the full, time dependent Navier-Stokes equations for the unsteady viscous flow about arbitrary two-dimensional airfoils, or any other two-dimensional bodies. Finally, initial results for three-dimensional applications are also presented.

Thompson, J. F.↗
NASA NTRS1991

Transonic Navier-Stokes Solutions about a Complex High-Speed Accelerator Configuration

Three dimensional transonic viscous flow computations are presented for a generic high-speed accelerator model which includes wing, body, filets,and a no-flow through engine nacelle. solutions are obtained from an algorithm for the compressible Navier-Stokes equations which incorporated an upwind-biased, flux-vector-splitting approach along with longitudinally-patched grids. Results are presented for fully turbulent flow assumptions and include correlations with wind tunnel data. A good quantitative agreement for the forebody surface pressure distribution is achieved between computations and the available wind-tunnel measurements at M(sub infinity) = 0.9. Furthermore, it is demonstrated that the flow is stagnating around the boattail region due to separation from the aft-engine cowl lip.

Ghaffari, F.↗
NASA NTRS1996

Comparison of Turbulence Models for Nozzle-Afterbody Flows with Propulsive Jets

A numerical investigation was conducted to assess the accuracy of two turbulence models when computing non-axisymmetric nozzle-afterbody flows with propulsive jets. Navier-Stokes solutions were obtained for a Convergent-divergent non-axisymmetric nozzle-afterbody and its associated jet exhaust plume at free-stream Mach numbers of 0.600 and 0.938 at an angle of attack of 0 deg. The Reynolds number based on model length was approximately 20 x 10(exp 6). Turbulent dissipation was modeled by the algebraic Baldwin-Lomax turbulence model with the Degani-Schiff modification and by the standard Jones-Launder kappa-epsilon turbulence model. At flow conditions without strong shocks and with little or no separation, both turbulence models predicted the pressures on the surfaces of the nozzle very well. When strong shocks and massive separation existed, both turbulence models were unable to predict the flow accurately. Mixing of the jet exhaust plume and the external flow was underpredicted. The differences in drag coefficients for the two turbulence models illustrate that substantial development is still required for computing very complex flows before nozzle performance can be predicted accurately for all external flow conditions.

Compton, William B., III↗
NASA NTRS2010

Comparing Spray Characteristics from Reynolds Averaged Navier-Stokes (RANS) National Combustion Code (NCC) Calculations Against Experimental Data for a Turbulent Reacting Flow

Developing physics-based tools to aid in reducing harmful combustion emissions, like Nitrogen Oxides (NOx), Carbon Monoxide (CO), Unburnt Hydrocarbons (UHC s), and Sulfur Dioxides (SOx), is an important goal of aeronautics research at NASA. As part of that effort, NASA Glenn Research Center is performing a detailed assessment and validation of an in-house combustion CFD code known as the National Combustion Code (NCC) for turbulent reacting flows. To assess the current capabilities of NCC for simulating turbulent reacting flows with liquid jet fuel injection, a set of Single Swirler Lean Direct Injection (LDI) experiments performed at the University of Cincinnati was chosen as an initial validation data set. This Jet-A/air combustion experiment operates at a lean equivalence ratio of 0.75 at atmospheric pressure and has a 4 percent static pressure drop across the swirler. Detailed comparisons of NCC predictions for gas temperature and gaseous emissions (CO and NOx) against this experiment are considered in a previous work. The current paper is focused on detailed comparisons of the spray characteristics (radial profiles of drop size distribution and at several radial rakes) from NCC simulations against the experimental data. Comparisons against experimental data show that the use of the correlation for primary spray break-up implemented by Raju in the NCC produces most realistic results, but this result needs to be improved. Given the single or ten step chemical kinetics models, use of a spray size correlation gives similar, acceptable results

Iannetti, Anthony C.↗
NASA NTRS1983

Comparison of supercritical airfoil flow calculations with wind-tunnel results

Navier-Stokes calculations have been performed for a supercritical airfoil at a transonic design condition and at a subsonic condition. Wind-tunnel pressure-rail measurements were employed as boundary data in the calculations to account for wall-interference effects. A fine mesh was used so that most details of the flows were resolved, particular attention having been given to the trailing-edge region. Detailed comparisons are made with the experimental data. Good agreement was obtained on the airfoil except at the trailing edge where separation occurred. Flow details in the trailing-edge region are examined and differences are shown to be attributable to the turbulence model employed.

King, L. S.↗
NASA NTRS1997

Effect of Coolant Temperature and Mass Flow on Film Cooling of Turbine Blades

A three-dimensional Navier Stokes code has been used to study the effect of coolant temperature, and coolant to mainstream mass flow ratio on the adiabatic effectiveness of a film-cooled turbine blade. The blade chosen is the VKI rotor with six rows of cooling holes including three rows on the shower head. The mainstream is akin to that under real engine conditions with stagnation temperature = 1900 K and stagnation pressure = 3 MPa. Generally, the adiabatic effectiveness is lower for a higher coolant temperature due to nonlinear effects via the compressibility of air. However, over the suction side of shower-head holes, the effectiveness is higher for a higher coolant temperature than that for a lower coolant temperature when the coolant to mainstream mass flow ratio is 5% or more. For a fixed coolant temperature, the effectiveness passes through a minima on the suction side of shower-head holes as the coolant to mainstream mass flow, ratio increases, while on the pressure side of shower-head holes, the effectiveness decreases with increase in coolant mass flow due to coolant jet lift-off. In all cases, the adiabatic effectiveness is highly three-dimensional.

Garg, Vijay K.↗
NASA NTRS1983

Modeling of turbulent separated flows for aerodynamic applications

Steady, high speed, compressible separated flows modeled through numerical simulations resulting from solutions of the mass-averaged Navier-Stokes equations are reviewed. Emphasis is placed on benchmark flows that represent simplified (but realistic) aerodynamic phenomena. These include impinging shock waves, compression corners, glancing shock waves, trailing edge regions, and supersonic high angle of attack flows. A critical assessment of modeling capabilities is provided by comparing the numerical simulations with experiment. The importance of combining experiment, numerical algorithm, grid, and turbulence model to effectively develop this potentially powerful simulation technique is stressed.

Marvin, J. G.↗
NASA NTRS1986

Modeling of turbulent separated flows for aerodynamic applications

Steady, high speed, compressible separated flows modeled through numerical simulations resulting from solutions of the mass-averaged Navier-Stokes equations are reviewed. Emphasis is placed on benchmark flows that represent simplified (but realistic) aerodynamic phenomena. These include impinging shock waves, compression corners, glancing shock waves, trailing edge regions, and supersonic high angle of attack flows. A critical assessment of modeling capabilities is provided by comparing the numerical simulations with experiment. The importance of combining experiment, numerical algorithm, grid, and turbulence model to effectively develop this potentially powerful simulation technique is stressed.

Marvin, J. G.↗
NASA NTRS1993

Effects of aft geometry on vortex behavior and force production by a tangential jet on a body at high alpha

Explored in this study are the physical effects of the numerical treatment of the aft geometry on the vortex behavior and force production due to a tangential jet on a body at a high angle of attack. The study is conducted numerically by solving the three-dimensional, compressible-flow, Reynolds-averaged Navier-Stokes equations. Two tangent-ogive cylinder configurations are used. The first configuration locates the computational exit plane at the end of the body, while the second caps the end of the body with a hemisphere and locates the exit plane far downstream. In both configurations, a blowing slot is located at the cylinder-ogive junction. Comparisons are made between results for the two configurations for cases with and without the jet present. Results indicate that inclusion of the wake of the body in the computations, while altering the flow in small details, does not change the character of the flow. The vortex behavior remains unaltered and the force distribution, while changing to some degree in magnitude, does not change in shape.

Font, G. I.↗
NASA NTRS1992

Aerodynamic design of turbomachinery blading in three-dimensional flow - An application to radial inflow turbines

A computational method, based on a theory for turbomachinery blading design in three-dimensional inviscid flow, is applied to a parametric design study of a radial inflow turbine wheel. As the method requires the specification of swirl distribution, a technique for its smooth generation within the blade region is proposed. Excellent agreements have been obtained between the computed results from this design method and those from direct Euler computations, demonstrating the correspondence and consistency between the two. The computed results indicate the sensitivity of the pressure distribution to a lean in the stacking axis and a minor alteration in the hub/shroud profiles. Analysis based on Navier-Stokes solver shows no breakdown of flow within the designed blade passage and agreement with that from design calculation; thus the flow in the designed turbine rotor closely approximates that of an inviscid one. These calculations illustrate the use of a design method coupled to an analysis tool for establishing guidelines and criteria for designing turbomachinery blading.

Yang, Y. L.↗
NASA NTRS1975

Computation of separated transonic turbulent flows

The two-dimensional Reynolds-averaged compressible Navier-Stokes equations are solved using MacCormack's second-order-accurate explicit finite difference method to simulate the separated transonic turbulent flow field over an airfoil. Four different algebraic eddy viscosity models are tested for viability to achieve turbulence closure for the class of flows considered. These models range from an unmodified boundary-layer mixing-length model to a relaxation model incorporating special considerations for the separation bubble region. Results of this study indicate the necessity for special attention to the separated flow region and suggest limits of applicability of algebraic turbulence models to these separated flow fields.

Deiwert, G. S.↗