Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Spinel”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,333 records · Page 74

Soft X-ray spectroscopy studies of adsorption and reaction of CO in the presence of H 2 over 6 nm MnO nanoparticles supported on mesoporous Co 3 O 4

MnO nanoparticles (6 nm) were supported on mesoporous spinel Co 3 O 4 and studied using ambient pressure X-ray photoelectron spectroscopy (APXPS) and in situ X-ray absorption spectroscopy (XAS) during hydrogenation of CO. The nature and evolution of surface adsorbed species as well as the oxidation states of the metal oxide surfaces were evaluated under oxidizing, reducing, and H 2 + CO (2:1) reaction atmospheres. From APXPS, MnO nanoparticle surfaces were found to be progressively reduced in H 2 atmospheres with increasing temperature. Surface adsorbed CO was found to be formed at the expense of lattice O under H 2 + CO reaction conditions. In situ XAS indicated that the dominant oxide species were Co(OH) 2 , Co (II) oxides, MnO, and Mn 3 O 4 under reaction conditions. In situ XAS also indicated the formation of gas phase CO 2 , the disappearance of lattice O, and the further reduction of Mn 3 O 4 to MnO upon prolonged reaction in H 2 + CO. Mass spectroscopy measurements showed the formation of CO 2 and hydrocarbons. Finally, the spent catalyst was investigated using scanning transmission X-ray microscopy and (scanning) transmission electron microscopy; the catalyst grains were found to be homogeneous.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Surface Structural and Chemical Evolution of Layered LiNi 0.8 Co 0.15 Al 0.05 O 2 (NCA) under High Voltage and Elevated Temperature Conditions

This work reports new insights into structural and chemical evolution of surface phases of LiNi 0.8 Co 0.15 Al 0.05 O 2 (NCA) held at constant high voltages (up to 4.75 V) as well as high temperatures (60 °C) by correlating crystal structure using high angle annular dark field scanning transmission electron microscopy (HAADF-STEM) imaging with chemistry using electron energy loss spectroscopy (EELS). We also followed the Al distribution within individual NCA particles by X-ray energy dispersive spectroscopy (EDS). The progression of these phases as a function of distance from the edge shows simultaneous evolution of crystal structures and chemistry from rocksalt to layered, forming a complete solid solution. We have also observed an extended disordered phase with rocksalt (Fm3m) symmetry in which quantitative electron energy loss spectroscopy reveals it to be an oxygen deficient cation disordered phase with chemical characteristics, as determined by EELS, similar to spinel. The formation of these disordered phases with cation and oxygen vacancies has been driven by surface oxygen loss caused by reactions with the electrolyte followed by cation migration from the octahedral 3a M (M = Ni, Co, Al) layer to the octahedral 3b Li layer. These surface rocksalt phases are not fully dense as they contain Al and Li as well as a high concentration of cation and oxygen vacancies. After discharge, Li is detected within these phases indicative that Li transport has occurred through these rocksalt phases. At 60 °C and 4.75 V a very large impedance rise is observed leading to complete cell irreversibility which is caused by significant metal dissolution from the cathode and formation of surface porosity. In the near surface region of some particles, a phase transformation from R3m (O3) to P3m1 (O1) is also observed which has become thermodynamically stable from complete delithiation as well as from local Al surface depletion.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Direct Experimental Probe of the Ni(II)/Ni(III)/Ni(IV) Redox Evolution in LiNi 0.5 Mn 1.5 O 4 Electrodes

The LiNi 0.5 Mn 1.5 O 4 spinel is an appealing cathode material for next generation rechargeable Li-ion batteries due to its high operating voltage of ~4.7 V (vs Li/Li + ). Although it is widely believed that the full range of electrochemical cycling involves the redox of Ni(II)/(IV), it has not been experimentally clarified whether Ni(III) exists as the intermediate state or a double-electron transfer takes place. Here, combined with theoretical calculations, we show unambiguous spectroscopic evidence of the Ni(III) state when the LiNi 0.5 Mn 1.5 O 4 electrode is half charged. This provides a direct verification of single-electron-transfer reactions in LiNi 0.5 Mn 1.5 O 4 upon cycling, namely, from Ni(II) to Ni(III), then to Ni(IV). Additionally, by virtue of its surface sensitivity, soft X-ray absorption spectroscopy also reveals the electrochemically inactive Ni 2+ and Mn 2+ phases on the electrode surface. Our work provides the long-awaited clarification of the single-electron transfer mechanism in LiNi 0.5 Mn 1.5 O 4 electrodes. Furthermore, the experimental results serve as a benchmark for further spectroscopic characterizations of Ni-based battery electrodes.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Calcium Gradient-Doped LiNi 0.5 Mn 1.5 O 4 Cathode for Long Cycle Life Lithium-Ion Batteries

High-voltage spinel LiNi 0.5 Mn 1.5 O 4 (LNMO) has attracted considerable attention as a cathode material for next-generation lithium-ion batteries due to its high operating voltage and intrinsically fast lithium-ion diffusion kinetics. However, the practical implementation of LNMO remains limited by its rapid capacity decay, primarily associated with bulk structural instability and parasitic interfacial reactions. To address these issues, we innovatively introduced calcium (Ca) as a dopant to enhance both the oxygen framework and surface stabilities of the LNMO crystal through gradient doping. Observations from the electronic microscopies, X-ray diffraction, and the elemental analysis confirmed that Ca is preferentially enriched at the particle surface, and a disordered crystal phase is preserved in the bulk in the gradient-doped LNMO cathodes. As cathodes in LIBs, the Ca gradient-doped (Ca gr) LNMO materials delivered formation capacities of ∼126−130 mAh/g and exhibited Coulombic efficiencies of 88−95%, which are consistently higher than those of the uniform-doped samples at the same doping level and undoped sample. Especially, the Ca gr 0.05 LNMO cathode demonstrated significantly improved rate capability with ∼113 mAh/g preserved at 10 C, while ∼92 mAh/g and ∼110 mAh/g for undoped and Ca uniform 0.05 LNMO, respectively, and excellent cycling stability, retaining ∼124.1 mAh/g (∼96.3% capacity retention) after 500 cycles. The analysis of cyclic voltammetry, differential capacity, and electrochemical impedance revealed that the excellent electrochemical performance is attributed to the structural and morphological advantages of gradient-doped LNMO cathodes with a disordered bulk structure for fast Li + diffusion and a Ca-enriched surface for minimizing the Mn dissolution.

25 ENERGY STORAGE↗

Phase Transformation Enables Stable Cycling and Fast Charging of Cation-Disordered Rocksalt Cathodes

Developing high-capacity, long-life cathodes is critical to overcome the energy limitations of current Li-ion batteries. In this work, we report a Li-excess cation-disordered rocksalt (DRX) cathode, Li 1.167 Mn0.7Ti 0.133 O 1.8 F 0.2 (M 0.7 F 0.2 ), which demonstrates excellent electrochemical performance. This cathode delivers a capacity approaching 250 mAh g –1 and maintains 200 mAh g –1 over 200 cycles with an average discharge voltage of 3.1 V at 2 V cutoff. The formation of a spinel-like phase during cycling enables fast charging, achieving over 240 mAh g –1 at 2C for 100 cycles. Combined X-ray absorption spectroscopy and transmission electron microscopy reveal reversible electrochemical redox processes and stable Mn local structures during 2 V discharge. These results highlight the potential of DRX cathodes for next-generation Li-ion batteries and provide insights into strategies to overcome kinetic limitations and optimize the cathode-electrolyte interface.

25 ENERGY STORAGE↗

Enhancing the Ion Transport in LiMn 1.5 Ni 0.5 O 4 by Altering the Particle Wulff Shape via Anisotropic Surface Segregation

Spontaneous and anisotropic surface segregation of W cations in LiMn 1.5 Ni 0.5 O 4 particles can alter the Wulff shape and improve surface stability, thereby significantly improving the electrochemical performance. An Auger electron nanoprobe was employed to identify the anisotropic surface segregation, whereby W cations prefer to segregate to {110} surface facets to decrease its relative surface energy according to Gibbs adsorption theory and subsequently increase its surface area according to Wulff theory. Consequently, the rate performance is improved (e.g., by ∼5-fold at a high rate of 25C) because the {110} facets have more open channels for fast lithium ion diffusion. Furthermore, X-ray photoelectron spectroscopy (XPS) depth profiling suggested that the surface segregation and partial reduction of W cation inhibit the formation of Mn 3+ on surfaces to improve cycling stability via enhancing the cathode electrolyte interphase (CEI) stability at high charging voltages. Here, this is the first report of using anisotropic surface segregation to thermodynamically control the particle morphology as well as enhancing CEI stability as a facile, and potentially general, method to significantly improve the electrochemical performance of battery electrodes. Combining neutron diffraction, an Auger electron nanoprobe, XPS, and other characterizations, we depict the underlying mechanisms of improved ionic transport and CEI stability in high-voltage LiMn 1.5 Ni 0.5 O 4 spinel materials.

Wulff shape↗

Nanoporous Co/Mn-Mixed Metal Oxides Templated via Polysulfones for Amine Oxidation

Herein, we report syntheses of microporous and mesoporous mixed metal oxides templated via an anionic surfactant. The effects of acid treatment, solvent type, and the amount of metal incorporation were investigated. Two different cobalt–manganese oxide spinels that were synthesized with surface areas as high as 137 m 2 /g were obtained. These nanomaterials indicate 3.8 nm monomodal pore sizes with crystallite sizes of 2.4–3.6 nm. 59 Co MASNMR studies have shown that quadrupole coupling values from 1500 to 5000 kHz with asymmetry values ranging from 0.1 to 1 have been used to identify cobalt oxidation states. Amine oxidation was used as a model reaction, which allowed for imide yields of above 90% from benzylamine homocoupling. Finally, the use of these nanoporous oxides allows for a high-yielding homocoupling of benzylamine.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

All in the Packaging: Structural and Electronic Effects of Nanoconfinement on Metal Oxide Nanoparticles

Encapsulation of inorganic nanoparticles within oligomeric protein cages can provide a multivalent approach for the synthesis of biocompatible nanomaterials by combining the nanoparticle-forming catalytic abilities of the cage interior with the biointeractive exterior surface of the cage. Protein cages provide more than simply a passive compartment for nanoparticle formation: protein-templated nanoparticles can exhibit structural and electronic properties that are dramatically different from materials synthesized without protein templating. Mixed Fe/Mn oxides formed under hydrothermal conditions form a structural series ranging from the {gamma}-Fe{sub 2}O{sub 3} (maghemite) to the Mn{sub 3}O{sub 4} (hausmannite) spinel structure as the Mn fraction is increased from 0 to 100%, while similar materials formed inside of human ferritin transition instead from maghemite to a layered Mn oxide structure similar to chalcophanite. The electronic properties of the protein-templated nanoparticles, as determined from soft X-ray absorption spectroscopy, also differ from those of their protein-free counterparts, in agreement with the structural results. Protein-templated synthesis may provide the opportunity for powerful control over nanomaterial properties through nanoconfinement, but the ultimate physical basis for these effects remains to be determined.

36 MATERIALS SCIENCE↗

Formation Mechanism and Shape Control of Monodisperse Magnetic CoFe 2 O 4 Nanocrystals

The formation mechanism and shape control of monodisperse magnetic cobalt ferrite (CoFe 2 O 4 ) nanocrystals produced by thermolysis of a stoichiometric Co 2+ Fe 2 3+ -oleate complex in organic solution has been investigated. Synthesis of the pure ternary CoFe 2 O 4 inverse spinel phase, without formation of any intermediate binary cobalt and iron oxides, is favored by the close thermal decomposition temperature of the Co 2+ -oleate and Fe 3+ -oleate precursors. For reaction temperatures between 250 and 320 °C, the nucleation and growth dynamics dictate the size and shape evolution of the nanocrystals. Prenucleation of CoFe 2 O 4 occurs at 250-300 °C but without any growth of nanocrystals, because the monomer concentration is lower than the critical nucleation concentration. For temperatures in the range of 300-320 °C, which is above the thermolysis temperature of the mixed Co 2+ Fe 2 3+ -oleate complex, the monomer concentration increases rapidly resulting in homogeneous nucleation. Atomic clusters of CoFe 2 O 4 with size <2 nm are initially formed at 314 °C that then grow rapidly when the temperature is raised to 320 °C in less than a minute. The shape of the CoFe 2 O 4 nanocrystals can be reproducibly controlled by prolonging the aging time at 320 °C, evolving from initial spherical, to spherical-to-cubic, cubic, corner-grown cubic, or starlike shapes. Finally and thus, with careful choice of reaction parameters, such as the precursor concentration and the heating rate, it is possible to achieve large-scale synthesis of shape-controlled monodisperse CoFe 2 O 4 nanocrystals with high yield.

36 MATERIALS SCIENCE↗

Heavy Metal Immobilization Through Phosphate and Thermal Treatment of Dredged Sediments

Disposal of dredged sediments is expensive and poses a major challenge for harbor dredging projects. Therefore beneficial reuse of these sediments as construction material is highly desirable assuming contaminants such as heavy metals are immobilized and organics are mineralized. In this research, the effect of the addition of 2.5% phosphate, followed by thermal treatment at 700 C, was investigated for metal contaminants in dredged sediments. Specifically, Zn speciation was evaluated, using X-ray absorption spectroscopy (XAS), by applying principal component analysis (PCA), target transformation (TT), and linear combination fit (LCF) to identify the main phases and their combination from an array of reference compounds. In dredged sediments, Zn was present as smithsonite (67%) and adsorbed to hydrous manganese oxides (18%) and hydrous iron oxides (15%). Phosphate addition resulted in precipitation of hopeite (22%), while calcination induced formation of spinels, gahnite (44%), and franklinite (34%). Although calcination was previously used to agglomerate phosphate phases by sintering, we found that it formed sparingly soluble Zn phases. Results from the U.S. EPA toxicity characteristic leaching procedure (TCLP) confirmed both phosphate addition and calcination reduced leachability of heavy metals with the combined treatment achieving up to an 89% reduction.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Core-Shell Structured Magnetic Ternary Nanocubes

While transition metal-doped ferrite nanoparticles constitute an important class of soft magnetic nanomaterials with spinel structures, the ability to control the shape and composition would enable a wide range of applications in homogeneous or heterogeneous reactions such as catalysis and magnetic separation of biomolecules. This report describes novel findings of an investigation of core-shell structured MnZn ferrite nanocubes synthesized in organic solvents by manipulating the reaction temperature and capping agent composition in the absence of the conventionally-used reducing agents. The core-shell structure of the highly-monodispersed nanocubes (~20 nm) are shown to consist of an Fe3O4 core and an (Mn0.5Zn0.5)(Fe0.9, Mn1.1)O4 shell. In comparison with Fe3O4 and other binary ferrite nanoparticles, the core-shell structured nanocubes were shown to display magnetic properties regulated by a combination of the core-shell composition, leading to a higher coercivity (~350 Oe) and field-cool/zero-field-cool characteristics drastically different from many regular MnZn ferrite nanoparticles. The findings are discussed in terms of the unique core-shell composition, the understanding of which has important implication to the exploration of this class of soft magnetic nanomaterials in many potential applications such as magnetic resonance imaging, fuel cells, and batteries.

30 DIRECT ENERGY CONVERSION↗

Phase Control on Surface for the Stabilization of High Energy Cathode Materials of Lithium Ion Batteries

The development of high energy electrode materials for lithium ion batteries is challenged by their inherent instabilities, which become more aggravated as the energy densities continue to climb, accordingly causing increasing concerns on battery safety and reliability. Here, taking the high voltage cathode of LiNi 0.5 Mn 1.5 O 4 as an example, we demonstrate a protocol to stabilize this cathode through a systematic phase modulating on its particle surface. We are able to transfer the spinel surface into a 30 nm shell composed of two functional phases including a rock-salt one and a layered one. The former is electrochemically inert for surface stabilization while the latter is designated to provide necessary electrochemical activity. The precise synthesis control enables us to tune the ratio of these two phases, and achieve an optimized balance between improved stability against structural degradation without sacrificing its capacity. This study highlights the critical importance of well-tailored surface phase property for the cathode stabilization of high energy lithium ion batteries.

25 ENERGY STORAGE↗

Compressional Behavior of Bulk and Nanorod LiMn[subscript 2]O[subscript 4] under Nonhydrostatic Stress

We studied the effect of pressure on LiMn{sub 2}O{sub 4} commercial powders and well-characterized nanorods using angle-dispersive synchrotron X-ray diffraction (XRD) in diamond anvil cells and found that spinel LiMn{sub 2}O{sub 4} is extremely sensitive to deviatoric stress induced by external applied pressure. Under nonhydrostatic conditions, bulk LiMn{sub 2}O{sub 4} underwent an irreversible phase transformation at pressures as low as 0.4 GPa from a cubic Fd-3m to tetragonal I4{sub 1}/amd structure driven by the Jahn-Teller effect. In contrast, bulk LiMn{sub 2}O{sub 4} under hydrostatic conditions experienced a reversible structural transformation beginning at approximately 11 GPa. Well-characterized LiMn{sub 2}O{sub 4} nanorods with an average diameter of 100-150 nm and an average length of 1-2 {micro}m were investigated under the same experimental conditions and showed a similar structural behavior as the bulk material confirming that LiMn{sub 2}O{sub 4} displays an extremely sensitive structural response to deviatoric stress. Scanning electron microscope (SEM) images of the samples especially the nanorods that were recovered from high pressure demonstrated a link between the changing morphology of the materials and the origin of the phase transition. We also found that nanostructured materials can accommodate more stress compared to their bulk counterparts. Our comparative study of bulk and nanorod LiMn{sub 2}O{sub 4} improves our understanding of their fundamental structural and mechanical properties, which can provide guidance for applied battery technology. In addition, LiMn{sub 2}O{sub 4} represents a strongly correlated system, whose structural, electronic, and magnetic properties at high pressure are of broad interest for fundamental chemistry and condensed matter physics.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Effects of Thermal Annealing on Structural and Magnetic Properties of Lithium Ferrite Nanoparticles

Pure, crystalline, {approx}10 nm lithium ferrite phase (Li{sub 0.5}Fe{sub 2.5}O{sub 4}), was successfully synthesized at very low temperature using a modified combustion method. The crystal structure and microstructure evolution of this system upon annealing were monitored by a careful investigation of X-ray diffractograms collected on a synchrotron source. Comparative analysis of the results obtained from the full profile Rietveld method (in reciprocal space) and the pair distribution function method (in direct space) was carried out. Nanocrystalline samples exhibit similar crystal structure, on average, with a partial ordering of Li{sup +} and Fe{sup 3+} ions between octahedral 4b and 12d sites on the spinel crystal lattice (space group P4{sub 3}32). After annealing at 973 K, cation distribution changes to a completely ordered, resembling that which is seen in the bulk lithium ferrite. The PDF analysis reveals abnormally high values of oxygen atomic displacement parameters in tetrahedral 8c sites (O1) indicating a significant disordering of the O1 network and suggests migration of lithium ions from 4b sites to the outer layers of nanoparticles. Analysis of room temperature Moessbauer spectra has shown that the hyperfine field for Fe{sup 3+} ions in tetrahedral 8c sites is the most sensitive on increasing the particle size and improving the crystallinity. From the differential thermal analysis, it was found that a lower driving force is required to induce an order-disorder phase transition in nanocrystalline samples, compared to the bulk-like sample, presumably due to the higher crystal disordering in these samples.

36 MATERIALS SCIENCE↗

Deactivation Mechanisms of Ni-Based Tar Reforming Catalysts As Monitored by X-ray Absorption Spectroscopy

Deactivation mechanisms of alumina-supported, Ni-based catalysts for tar reforming in biomass-derived syngas were evaluated using extended X-ray absorption fine structure (EXAFS) spectroscopy. Catalysts were characterized before and after catalytic reaction cycles and regeneration procedures, which included oxidation by a mixture of steam and air, and reduction in hydrogen. Qualitative analysis of the EXAFS spectra revealed that oxidation of a portion of the Ni in the catalysts to form an oxide phase and/or a sulfide phase were likely scenarios that led to catalyst deactivation with time-on-stream and with increased reaction cycles. Deactivation through carbon deposition, phosphorus poisoning, or changes in particle size were deemed as unlikely causes. Quantitative analysis of the EXAFS spectra indicated sulfur poisoning occurred with time-on-stream, and the contaminating species could not be completely removed during the regeneration protocols. The results also verified that Ni-containing oxide phases (most likely a spinel also containing Mg and Al) formed and contributed to the deactivation. This study validates the need for developing catalyst systems that will protect Ni from sulfur poisoning and oxide formation at elevated reaction and regeneration temperatures.

08 HYDROGEN↗

Growth of layered LiNi{sub 0.5}Mn{sub 0.5}O{sub 2} thin films by pulsed laser deposition for application in microbatteries

LiNi{sub 0.5}Mn{sub 0.5}O{sub 2} films were prepared by pulsed laser deposition on stainless steel (SS) and Au substrates. The substrate was found to play an important role in determining the growth of films. Although similar x-ray diffraction spectra were observed for both types of substrates, Raman spectra exhibited different features. The charge-discharge behavior of the film on the SS substrate indicates a spinel structure while the charge-discharge behavior of the film on the Au substrate indicates a layered structure. The secondary ion mass spectrometry depth-profiling results indicate interdiffusion between the film and the substrate, which inhibits the formation of pure layered LiNi{sub 0.5}Mn{sub 0.5}O{sub 2} phase.

36 MATERIALS SCIENCE↗

Raman and dielectric study of Ba{sub 0.4}Sr{sub 0.6}TiO{sub 3}-MgAl{sub 2}O{sub 4} tunable microwave composite

(1-x)Ba{sub 0.4}Sr{sub 0.6}TiO{sub 3}-xMgAl{sub 2}O{sub 4} (x=0.00, 0.05, 0.10, 0.20, and 0.30) composite ceramics have been synthesized by the solid-state reaction, and its structural and dielectric properties have been systematically characterized. Two crystalline phases, a cubic perovskite structure Ba{sub 0.4}Sr{sub 0.6}TiO{sub 3} (BST) and a face-centered-cubic spinel structure MgAl{sub 2}O{sub 4} (MA), are clearly visible for x{>=}0.05. As the MA content increases, the composite ceramics show an increased degree of deviation from the Curie-Weiss law and an increased diffuseness of the dielectric peak. Meanwhile, the tunability of composite ceramics increases. Raman analysis clearly indicates that the incorporation of MA lowers the permittivity and degrades the quality factor of BST composites, which is ascribed to the deterioration on B-site ordering of ABO{sub 3} perovskite structure.

36 MATERIALS SCIENCE↗