SEARCH · Engineering Papers

Results for “Simulator Study”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,333 records · Page 74

All sources NASA NTRS DOE OSTI

NASA NTRS1974

A STOL airworthiness investigation using a simulation of an augmentor wing transport. Volume 1: Summary of results and airworthiness implications

A simulator study of STOL airworthiness criteria was conducted using a model of an augmentor wing transport. The approach, flare and landing, go-around, and takeoff phases of flight were investigated. The results are summarized and possible implications with regard to airworthiness criteria are discussed. The results provide a data base for future STOL airworthiness requirements and a preliminary indication of potential problem areas. The results are also compared to the results from an earlier simulation of the Breguet 941S. Where possible, airworthiness criteria are proposed for consideration.

Stapleford, R. L.↗

NASA NTRS1977

NASA ground-based and space-based laser ranging systems

The development of NASA laser ranging systems is discussed with reference to applications such as orbit determination, gravity-field studies, and analyses of polar motion, earth tides, and tectonic plate motion. Several laser ranging designs are described noting the first satellite laser ranging experiment, the Moblas II and III systems, and the laser ranging satellites presently in orbit. Primary error sources are identified as atmospheric delay, optical signal-to-noise ratios, the electron multiplier, time-interval measurements, and target noise. Plans for Shuttle-based laser ranging systems are reviewed noting simulation studies of 12-day Shuttle missions.

Fitzmaurice, M. W.↗

NASA NTRS1985

Space-flight simulations of calcium metabolism using a mathematical model of calcium regulation

The results of a series of simulation studies of calcium matabolic changes which have been recorded during human exposure to bed rest and space flight are presented. Space flight and bed rest data demonstrate losses of total body calcium during exposure to hypogravic environments. These losses are evidenced by higher than normal rates of urine calcium excretion and by negative calcium balances. In addition, intestinal absorption rates and bone mineral content are assumed to decrease. The bed rest and space flight simulations were executed on a mathematical model of the calcium metabolic system. The purpose of the simulations is to theoretically test hypotheses and predict system responses which are occurring during given experimental stresses. In this case, hypogravity occurs through the comparison of simulation and experimental data and through the analysis of model structure and system responses. The model reliably simulates the responses of selected bed rest and space flight parameters. When experimental data are available, the simulated skeletal responses and regulatory factors involved in the responses agree with space flight data collected on rodents. In addition, areas within the model that need improvement are identified.

Brand, S. N.↗

NASA NTRS1996

Experimental study of vortex breakdown in a cylindrical, swirling flow

The stability of a steady, vortical flow in a cylindrical container with one rotating endwall has been experimentally examined to gain insight into the process of vortex breakdowwn. The dynamics of the flow are governed by the Reynolds number (Re) and the aspect ratio of the cylinder. Re is given by Omega R(sup 2)/nu, where Omega is the speed of rotation of the endwall, R is the cylinder radius, and nu is the kinematic viscosity of the fluid filling the cylinder. The aspect ratio is H/R, where H is the height of the cylinder. Numerical simulation studies disagree whether or not the steady breakdown is stable beyond a critical Reynolds number, Re(sub c). Previous experimental researches have considered the steady and unsteady flows near Re(sub c), but have not explored the stability of the steady breakdown structures beyond this value. In this investigation, laser induced fluorescence was utilized to observe both steady and unsteady vortex breakdown at a fixed H/R of 2.5 with Re varying around Re(sub c). When the Re of a steady flow was slowly increased beyond Re(sub c), the breakdown structure remained steady even though unsteadiness was possible. In addition, a number of hysteresis events involving the oscillation periods of the unsteady flow were noted. The results show that both steady and unsteady vortex breakdown occur for a limited range of Re above Re(sub c). Also, with increasing Re, complex flow transformations take place that alter the period at which the unsteady flow oscillates.

Stevens, J. L.↗

NASA NTRS1985

Evolution and interaction of interplanetary shocks

Whang's unsteady, one-dimensional, one-fluid MHD model is used to carry out a simulation study of the evolution of the solar wind based on two shock events over a distance of the order of 10 AU in the outer heliosphere. The study is based on the observation of two events, each observed by two or more spacecraft. The results show that the shock process, including the formation, collision, and merging of shocks, dominates the dynamical evolution of large-scale solar wind structures. In the outer heliosphere, the large-scale solar wind and magnetic field evolve into a much simpler structure, and MHD shocks are present as a principal component of the solar wind. The simulation results shed new light on the interaction and evolution of large interplanetary streams.

Whang, Y. C.↗

DOE OSTI2024

A High-Fidelity Electromagnetic Transient Model of Inverter-based Resources Integrated to an IEEE-9 Bus System for Benchmarking Studies

An inverter-based resource (IBR) is a source of electricity that is asynchronously connected to the electrical grid via an electronic power converter. These power sources lack the intrinsic behaviors of the standard power plants, presenting specific challenges to system stability. These power sources lack the intrinsic behaviors of the standards power plants and their features are almost entirely defined by the control strategy used on them, presenting specific challenges to system stability as their penetration increases into the already fragile Bulk Power System (BPS). Utilizing renewable energy has a great upside but the electrical industry needs to understand the requirements like performing electromagnetic transient (EMT) simulation studies in planning and/or in interconnection studies. This paper presents the development of a high-fidelity EMT model based on commercial equipment and field parameters, which at the same time aims to study the increasing penetration of IBRs and their impact on the actual BPS. The open-source EMT model developed will be a benchmarking example that can be used to evaluate algorithms in the power grid (including evaluating grid-forming controls, power system monitoring and operation, etc.).

Martinez Montejano, Misael↗

NASA NTRS1983

Scan angle dependence of radiance recorded by the NOAA-AVHRR

NOAA-AVHRR data is being used to monitor global vegetation type and condition and to study various environmental factors in addition to performance of meteorological functions. The AVHRR instrument has + or - 54 deg as maximum scan angle limits and it is necessary to be aware of the effects of sun-target-sensor geometry at extreme scan angles to be able to properly interpret the satellite images. In order to interpret the images for vegetation type and condition analysis, it is necessary to calibrate back to the nadir view position. Both simulation studies and empirical investigations with digital scanner data have been performed in order to sufficiently understand the effects of scan angle and sun angle, as well as the effects of atmospheric scattering, to eventually perform adequate calibrations. Not surprisingly, the effects are large and studies are continuing to provide improved calibrations.

Duggin, M. J.↗

NASA NTRS1990

Cockpit display of hazardous weather information

Information transfer and display issues associated with the dissemination of hazardous weather warnings are studied in the context of windshear alerts. Operational and developmental windshear detection systems are briefly reviewed. The July 11, 1988 microburst events observed as part of the Denver Terminal Doppler Weather Radar (TDWR) operational evaluation are analyzed in terms of information transfer and the effectiveness of the microburst alerts. Information transfer, message content and display issues associated with microburst alerts generated from ground based sources are evaluated by means of pilot opinion surveys and part task simulator studies.

Hansman, R. John, Jr.↗

NASA NTRS1995

A study of space-rated connectors using a robot end-effector

The main research activities have been directed toward the study of the Robot Operated Materials Processing System (ROMPS), developed at GSFC under a flight project to investigate commercially promising in-space material processes and to design reflyable robot automated systems to be used in the above processes for low-cost operations. The research activities can be divided into two phases. Phase 1 dealt with testing of ROMPS robot mechanical interfaces and compliant device using a Stewart Platform testbed and Phase 2 with computer simulation study of the ROMPS robot control system. This report provides a summary of the results obtained in Phase 1 and Phase 2.

Nguyen, Charles C.↗

NASA NTRS2016

Sensitivity Analysis of the Integrated Medical Model for ISS Programs

Sensitivity analysis estimates the relative contribution of the uncertainty in input values to the uncertainty of model outputs. Partial Rank Correlation Coefficient (PRCC) and Standardized Rank Regression Coefficient (SRRC) are methods of conducting sensitivity analysis on nonlinear simulation models like the Integrated Medical Model (IMM). The PRCC method estimates the sensitivity using partial correlation of the ranks of the generated input values to each generated output value. The partial part is so named because adjustments are made for the linear effects of all the other input values in the calculation of correlation between a particular input and each output. In SRRC, standardized regression-based coefficients measure the sensitivity of each input, adjusted for all the other inputs, on each output. Because the relative ranking of each of the inputs and outputs is used, as opposed to the values themselves, both methods accommodate the nonlinear relationship of the underlying model. As part of the IMM v4.0 validation study, simulations are available that predict 33 person-missions on ISS and 111 person-missions on STS. These simulated data predictions feed the sensitivity analysis procedures. The inputs to the sensitivity procedures include the number occurrences of each of the one hundred IMM medical conditions generated over the simulations and the associated IMM outputs: total quality time lost (QTL), number of evacuations (EVAC), and number of loss of crew lives (LOCL). The IMM team will report the results of using PRCC and SRRC on IMM v4.0 predictions of the ISS and STS missions created as part of the external validation study. Tornado plots will assist in the visualization of the condition-related input sensitivities to each of the main outcomes. The outcomes of this sensitivity analysis will drive review focus by identifying conditions where changes in uncertainty could drive changes in overall model output uncertainty. These efforts are an integral part of the overall verification, validation, and credibility review of IMM v4.0.

medical equipment↗

DOE OSTI2025

A study on dc fault handling of dc-dc converter based on series and parallel connected DABs in MVdc applications

With the increase of direct current (dc) based power generating stations and loads, multi-terminal medium voltage dc (MT-MVdc) systems are gaining popularity. The dc sources and loads are interfaced with the MT-MVdc systems using series and parallel connected dual-active-bridge (SP-DAB). In this paper, the dc fault ride through procedure of SP-DAB meant for MT-MVdc application is analyzed. The need for dc breaker (DCB) under the requirements of MT-MVdc is established through EMT simulation studies. It is shown that an additional dc filter capacitor is essential at the output terminals of the SP-DAB to ride through the dc faults.

Jaldanki, Sreenivasa [ORNL] (ORCID:000000028122322↗

DOE OSTI2022

Symmetry-Breaking and Self-Sorting in Block Copolymer-Based Multicomponent Nanocomposites

Co-assembly of inorganic nanoparticles (NPs) and nanostructured polymer matrix represents an intricate interplay of enthalpic or entropic forces. Particle size largely affects the phase behavior of the nanocomposite. Theoretical studies indicate that new morphologies would emerge when the particles become comparable to the soft matrix's size, but this has rarely been supported experimentally. By designing a multicomponent blend composed of NPs, block copolymer-based supramolecules, and small molecules, a 3-D ordered lattice beyond the native BCP's morphology was recently reported when the particle is larger than the microdomain of BCP. The blend can accommodate various formulation variables. In this work, when the particle size equals the microdomain size, a symmetry-broken phase appears in a narrow range of particle sizes and compositions, which we named the "train track" structure. In this phase, the NPs aligned into a 3-D hexagonal lattice and packed asymmetrically along the c axis, making the projection of the ac and the bc plane resemble train tracks. Computational studies show that the broken symmetry reduces the polymer chain deformation and stabilizes the metastable hexagonally perforated lamellar morphology. Given the mobility of the multicomponent blend, the system shows a self-sorting behavior: segregating into two macroscopic phases with different nanostructures based on only a few nanometers NP size differences. Smaller NPs form "train track" morphology, while larger NPs form a "simple hexagon" structure, where the NPs take a symmetric hexagonal arrangement. Detailed structural evolution and simulation studies confirm the systematic-wide cooperativity across different components, indicating the strong self-regulation of the multicomponent system.

"train track" morphology↗

DOE OSTI2024

Review and meta-analysis of electron temperatures from high-intensity laser–solid interactions

The accelerated electron spectrum from high-intensity laser–solid interaction is often conveniently described using a Boltzmann distribution, whose temperature is known within the field as the hot-electron temperature. The importance of the electron temperature is highlighted by the sheer number of experimental and simulation studies on the subject over the past three decades. Recently, multi-kJ, multi-ps pulses have yielded electron spectra with temperatures far beyond the expected ponderomotive result. Expressions that predict the electron temperature considering laser parameters beyond intensity and wavelength have been developed, albeit using small datasets. In this review, we present what is, to the best of our knowledge, the largest dataset of electron temperatures gathered from experimental measurements and particle-in-cell simulations. This dataset allows us to compare existing analytical and empirical hot-electron temperature scaling models over a wide parameter range. We also develop new scaling models that incorporate the laser pulse duration of the laser and the plasma scale length. Three models that include pulse-duration and scale length dependence are especially successful at predicting both simulated and experimental data. The dataset will soon be made publicly available to encourage further investigation.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

DOE OSTI2023

Pressure Transient Analyses and Poroelastic Modeling of Hydraulic Fracture Dilation for Multiple Injections at the Devine Fracture Pilot Site

Our team has conducted electromagnetic (EM) surveys for the past six years to monitor hydraulic-fracture behavior at the Devine Fracture Pilot Site (DFPS). The sub-horizontal orientation of a shallow hydraulic fracture at the DFPS provides uniform access to the fracture area for interrogation and data collection. Ahmadian et al. (2023) suggested a possible correlation between spatiotemporal changes in the flow rate, bottomhole pressure (BHP), and the observed surface recorded electric field at the DFPS. In this paper, we present the development of poroelastic forward models and pressure transient analyses (PTAs) to support the development of a multiphysics inverse model for these EM surveys. First, we conducted PTAs of the shut-in periods after six injections out of 10 to determine the fracture closure pressure (FCP) or the overburden pressure used in a poroelastic fracture reopening model. Second, we developed a finite-element poroelastic model throughout five injection cycles to include the effect of the cumulative injected volumes due to the previous injections on current fracture dilation in the presence of highly permeable unpropped and propped zones adjacent to the cohesive layer that models fracture reopening. Fracture reopening in this poroelastic model is based on a calibrated traction-separation response using the bottomhole pressure collected in two injection campaigns in 2020 and 2022. We used the outcomes of a previous simulation study of the primary hydraulic-fracturing stimulation to define the dimension of an unpropped fracture zone ahead of the propped fracture area. The PTAs led to FCPs consistent with those obtained using the injection data collected at the DFPS in 2020. Further, these analyses showed that at later injections, the fracture closure occurred at a later time with respect to the shut-in time, inferring the effect of cumulative injected volumes in previous injections. The simulation results show that considering the propped and unpropped fracture zones improves our poroelastic model in predicting the injection-well BHP. The numerical simulation results demonstrate a significant excess pore pressure near the fracture because of the preceding formation loadings by the previous injections. The obtained fracture dilation area and fluid pressure distribution provide a basis to improve the development of a multiphysics inverse model. Furthermore, in an iteratively coupled scheme, this pressure distribution can be introduced into EM models to render a holistic view of the causative mechanisms for the surface signal anomalies.

02 PETROLEUM↗

NASA NTRS1974

A STOL airworthiness investigation using a simulation of a deflected slipstream transport. Volume 1: Summary of results and airworthiness implications

A simulator study of short takeoff and landing (STOL) aircraft was conducted using a model of a deflected slipstream transport aircraft. The subjects considered are: (1) the approach, (2) flare and landing, (3) go-around, and (4) takeoff phases of flight. The results are summarized and possible implications with regard to airworthiness criteria are discussed. A data base is provided for future STOL airworthiness requirements and a preliminary indication of potential problem areas is developed. Comparison of the simulation results with various proposed STOL criteria indicates significant deficiencies in many of these criteria.

Stapleford, R. L.↗

NASA NTRS1993

Low bandwidth robust controllers for flight

Through throttle manipulations, engine thrust can be used for emergency flight control for multi-engine aircraft. Previous study by NASA Dryden has shown the use of throttles for emergency flight control to be very difficult. In general, manual fly-by-throttle is extremely difficult - with landing almost impossible, but control augmentation makes runway landings feasible. Flight path control using throttles-only to achieve safe emergency landing for a large jet transport airplane, Boeing 720, was investigated using Quantitative Feedback Theory (QFT). Results were compared to an augmented control developed in a previous simulation study. The control augmentation corrected the unsatisfactory open-loop characteristics by increasing system bandwidth and damping, but increasing the control bandwidth substantially proved very difficult. The augmented pitch control is robust under no or moderate turbulence. The augmented roll control is sensitive to configuration changes.

Biezad, Daniel J.↗

NASA NTRS1993

Low Bandwidth Robust Controllers for Flight

Biezad, Daniel J.↗

NASA NTRS2003

Intelligent Control Approaches for UAVs

This talk will present overviews of various intelligent control technologies currently being developed and studied at the NASA Ames Research Center as applicable to Unmanned Aerial Vehicles (UAVs), Mars flyers, and to the next generation of flight controllers for manned aircraft. The approaches being examined include: (a) direct adaptive dynamic inverse controller, (b) adaptive critic-based optimal trajectory generator; (c) optimal allocation technique based on linear programming; (4) immunized maneuvering using autopilot building blocks. These approaches can utilize, but do not require, fault detection and isolation information. Piloted and unmanned simulation studies are performed to examine if the intelligent flight control techniques adequately: 1) match flying qualities of modem fly-by-wire flight controllers under nominal conditions; 2) improve performance under failure conditions when sufficient control authority is available; and 3) achieve intelligent maneuvering capabilities for unmanned vehicles. Results obtained so far will be presented and discussed.

KrisnaKumar, Kalmanje↗