Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Science”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,333 records · Page 74

Data Storage and sharing for the long tail of science

Research data infrastructure such as storage must now accommodate new requirements resulting from trends in research data management that require researchers to store their data for the long term and make it available to other researchers. We propose Data Depot, a system and service that provides capabilities for shared space within a group, shared applications, flexible access patterns and ease of transfer at Purdue University. We evaluate Depot as a solution for storing and sharing multiterabytes of data produced in the long tail of science with a use case in soundscape ecology studies from the Human- Environment Modeling and Analysis Laboratory. We observe that with the capabilities enabled by Data Depot, researchers can easily deploy fine-grained data access control, manage data transfer and sharing, as well as integrate their workflows into a High Performance Computing environment.

96 KNOWLEDGE MANAGEMENT AND PRESERVATION↗

Physical Sciences Laboratory 1 Rooftop Stack Mixing Study

To address concerns about worker exposures on the Physical Science Laboratory (PSL) rooftop, a tracer study was conducted to measure gaseous tracer concentrations downwind of six stacks on the southern half of the PSL building (PSL-1). These concerns were raised, in part, due to the non-standard configuration of the stacks on this building. Five of the six stacks were only about 8 feet tall, with one shorter stack that was essentially level with the roof deck. These stacks were reconfigured in August 2016, and these exhaust points on PSL-1 are now 18 feet tall. This report describes the objectives of the tracer tests performed on PSL-1, provides an overview of how the tests were executed, and presents results of the tests. The tests on the PSL rooftop were a follow-on project from a similar study performed on the LSL-II ventilation exhaust (Flaherty and Antonio, 2016).

54 ENVIRONMENTAL SCIENCES↗

Sampling for Air Chemical Emissions from the Life Sciences Laboratory II

Sampling for air chemical emissions from the Life Science Laboratory II (LSL-II) ventilation stack was performed in an effort to determine potential exposure of maintenance staff to laboratory exhaust on the building roof. The concern about worker exposure was raised in December 2015 and several activities were performed to assist in estimating exposure concentrations. Data quality objectives were developed to determine the need for and scope and parameters of a sampling campaign to measure chemical emissions from research and development activities to the outside air. The activities provided data on temporal variation of air chemical concentrations and a basis for evaluating calculated emissions. Sampling for air chemical emissions was performed in the LSL-II ventilation stack over the 6-week period from July 26 to September 1, 2016. A total of 12 sampling events were carried out using 16 sample media. Resulting analysis provided concentration data on 49 analytes. All results were below occupational exposure limits and most results were below detection limits. When compared to calculated emissions, only 5 of the 49 chemicals had measured concentrations greater than predicted. This sampling effort will inform other study components to develop a more complete picture of a worker’s potential exposure from LSL-II rooftop activities. Mixing studies were conducted to inform spatial variation in concentrations at other rooftop locations and can be used in conjunction with these results to provide temporal variations in concentrations for estimating the potential exposure to workers working in and around the LSL-II stack.

54 ENVIRONMENTAL SCIENCES↗

Scientific Computation Application Partnerships in Materials and Chemical Sciences, Charge Transfer and Charge Transport in Photoactivated Systems, Developing Electron-Correlated Methods for Excited State Structure and Dynamics in the NWChem Software Suite

Charge transfer and charge transport in photoactivated systems are fundamental processes that underlie solar energy capture, solar energy conversion, and photoactivated catalysis, both organometallic and enzymatic. We developed methods, algorithms, and software tools needed for reliable treatment of the underlying physics for charge transfer and charge transport, an undertaking with broad applicability to the goals of the fundamental-interaction component of the Department of Energy Office of Basic Energy Sciences and the exascale initiative of the Office of Advanced Scientific Computing Research.

14 SOLAR ENERGY↗

Synthesis of Actinide Materials for the Study of Basic Actinide Science and Rapid Separation of Fission Products

This dissertation covers several distinct projects relating to the fields of nuclear forensics and basic actinide science. Post-detonation nuclear forensics, in particular, the study of fission products resulting from a nuclear device to determine device attributes and information, often depends on the comparison of fission products to a library of known ratios. The expansion of this library is imperative as technology advances. Rapid separation of fission products from a target material, without the need to dissolve the target, is an important technique to develop to improve the library and provide a means to develop samples and standards for testing separations. Several materials were studied as a proof-of-concept that fission products can be extracted from a solid target, including microparticulate (< 10 μm diameter) dUO 2 , porous metal organic frameworks (MOFs) synthesized from depleted uranium (dU), and other organicbased frameworks containing dU. The targets were irradiated with fast neutrons from one of two different neutron sources, contacted with dilute acids to facilitate the separation of fission products, and analyzed via gamma spectroscopy for separation yields. The results indicate that smaller particle sizes of dUO 2 in contact with the secondary matrix KBr yield higher separation yields than particles without a secondary matrix. It was also discovered that using 0.1 M HNO 3 as a contact acid leads to the dissolution of the target material. Lower concentrations of acid were used for future experiments. In the case of the MOFs, a larger pore size in the framework leads to higher separation yields when contacted with 0.01 M HNO 3 . Different types of frameworks also yield different results.

36 MATERIALS SCIENCE↗

Surface Science Studies of Nano-crystalline Metal Oxide and Metal-Metal Oxide Core-Shell Catalysts

In this project we are bridging the materials gap between fundamental surface science studies of metal-oxide, single-crystal model catalysts, and high surface catalysts that are used industrially by measuring structure-activity relationships for thin films of well-defined, metal oxide nanoparticles. We are concentrating on systems that are of interest for use as catalysts for complete-, selective- and photo-oxidation of organic oxygenates and the research program builds upon our group’s extensive experience in using surface-sensitive spectroscopic techniques to elucidate structure-activity relationships for oxide surfaces. The goals of this work are (1) determine the role that highly undercoordinated edge and corner sites play in catalysis on oxides, (2) determine if control of oxide nano-crystalline size and shape can be used to design highly active and selective catalysts for specific reactions, and (3) determine how crystallite size and shape affect the photocatalytic properties of semiconducting oxides such as TiO 2 . In addition to our current studies of nanocrystalline oxides, the research program will also include studies of hierarchal structured core-shell materials in which a metal nanoparticle is encased in a porous nano-crystalline oxide shell. Such materials have interesting catalytic properties and our goal will be to use these unique model systems to study synergistic interactions between a metal and a reducible metal oxide support. The work during the second year of the grant has focused on the catalytic and photocatalytic activity of thin films of well-defined TiO 2 nanocrystals that have a truncated bi-pyramidal shape. An overview of this work is given below.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

The National Academies of Sciences, Engineering, Medicine: Research Associateship Program with NETL - National Energy Technology Laboratory and NETL/MHEP - Methane Hydrates Fellowship Program

During the reporting period, the National Academies of Sciences, Engineering, and Medicine (the Academies) NRC conducted the following activities in support of the subject contract: outreach and promotion; processing and review of applications; administration of awards; and, outcomes reporting.

36 MATERIALS SCIENCE↗

Science and Engineering Team Repository Selection and Validation

The National Nuclear Security Administration’s Office of Nuclear Smuggling Detection and Deterrence (NSDD), Science and Engineering Team (SET) has engaged Brookhaven National Laboratory (BNL) in the selection, development and management of a knowledge management platform. This platform will serve as a repository for programmatic documents, data, and other relevant files. In support of this effort, BNL implemented a sixteen-month process to ensure the selection of the most relevant and user-friendly repository from among several commercially available and open source options.

98 NUCLEAR DISARMAMENT, SAFEGUARDS, AND PHYSICAL P↗

Desalination Science & Technology Postdoc Research Associate Ad

We are seeking a Postdoctoral Research Associate to join our multidisciplinary team to conduct research on the science and technology of desalination. The aim of the project is to study the fundamental behavior of salt ions and other impurities in aqueous solutions, including the trace elements and hydrocarbons found in water co-produced with oil and gas. The current field of interest for the project is the physical, chemical, and electrical investigation of the behavior of dissolved ions and impurities in both high density, liquid-like, and low density, vapor-like, aqueous fluids at high temperatures and pressures.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Nuclear Science User Facility: Overview of Neutron Irradiation Activities

The Nuclear Science User Facilities (NSUF), established in 2007 as the Advanced Test Reactor (ATR) National Scientific User Facility is chartered to provide cost-free access to unique and important research and development capabilities and infrastructure to nuclear energy-focused researchers. Users can apply for access to any of the NSUF INL or partner facilities using the same process, either through the annual Office of Nuclear Energy Consolidated Innovative Nuclear Research funding announcement or the NSUF Rapid Turnaround Experiment (RTE) opportunities, offered three times each year. The NSUF has several research and test reactors available as well as ion beamlines and x-ray light sources for experimental use in support of the R&D objectives of the DOE Office of Nuclear Energy. This presentation reviews the current capabilities, needs, awarded irradiation experiments and potential use in FY 2018.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

The Kinetic Monte Carlo Algorithm in Materials Science: Study of Radiation-Induced Segregation in Fe-Cr alloys [Slides]

KMC is a flexible tool applicable to many fields in Material Science. Continuum models need free energies and transport coefficients. Atomistic KMC: an efficient tool to study RIS especially when coupled with ab initio calculations. AKMC generates crucial data to incorporate in Phase Field methods. AKMC shows that RIS profiles depend strongly on the interface spacing. Drawbacks include that it is time consuming and limited to relatively short times. Self-Consistent Mean-Field (SCMF) is an alternative approach to calculate phenomenological coefficients that avoids the KMC caveats.

36 MATERIALS SCIENCE↗

Cold-Air Outbreaks in the Marine Boundary Layer Experiment (COMBLE) Science Implementation Plan

Boreal regions have experienced warming faster than the rest of the Earth, and the arctic ice cover has declined at a rate faster than predicted by most climate models. Uncertainties in climate projections for this region are large, in part due to the lack of observational guidance to constrain the treatment of aerosol-cloud-precipitation linkages in climate models. To remedy this shortfall, field campaigns have been conducted to collect integrated, comprehensive measurements under specific atmospheric regimes. While considerable efforts have been devoted to subtropical marine boundary-layer clouds, as well as to clouds in the stable arctic environment, very few targeted observations exist of convective boundary-layer clouds that form over open water when cold airmasses are advected off ice-covered regions or boreal continents. There is an urgent need to shed light on the dynamics and microphysical properties of clouds and precipitation in the high-latitude marine boundary layer during cold-air outbreaks. Despite the common occurrence of linear and cellular cloud patterns that typify cold-air outbreaks, little is known about the properties of these clouds; how they vary with surface, environmental, and aerosol conditions; the role of cold-air outbreaks in the global atmospheric and ocean circulation; and the accuracy of the treatment of this atmospheric regime in climate models. Thus, we proposed to conduct the Cold-Air Outbreaks in the Marine Boundary Layer Experiment (COMBLE), to focus on marine boundary-layer clouds during cold-air outbreaks. COMBLE will deploy the first ARM Mobile Facility (AMF1) and an AMF “satellite” station in the far North Atlantic in January–May 2020. COMBLE will take advantage of the synergy with several coincident campaigns, notably MOSAIC, which will characterize the source airmasses of cold-air outbreaks over the arctic ice, and (AC) 3 , which will operate several aircraft between northern Scandinavia and the MOSAIC deployment to document evolution of these airmasses. COMBLE and its sister campaigns will compose a four-member array of supersites between northern Scandinavia and the Arctic, each with profiling and in situ cloud, precipitation, radiation, and aerosol measurements. COMBLE will be guided by six science themes. The first five deal with boundary-layer convection in cold-air outbreaks: (1) the fetch-dependent mesoscale organization of clouds and precipitation, including linear and cellular convection; (2) surface heat and momentum fluxes and vertical profiles of temperature, humidity, wind, and turbulence; (3) vertical structure of clouds and precipitation; (4) the sources and sinks of aerosol, including ice-nucleating particles, and the role of cloud-active aerosol on cloud processes and radiative fluxes; and (5) the influence of these four themes on polar cyclogenesis and polar low vertical structure. The overarching sixth theme is that COMBLE will provide integrated data sets of dynamical, thermodynamic, and cloud microphysical characteristics of marine boundary-layer convection in cold-air outbreaks, including cloud and aerosol properties, that will enable constraining high-resolution numerical simulations, developing process-level understanding, and, subsequently, evaluating and improving representations of shallow convection in weather and climate models.

54 ENVIRONMENTAL SCIENCES↗

Department of Homeland Security, Science and Technology Directorate, Borders and Maritime Security Division : Renewable Energy Research Roadmap

The U.S. Department of Homeland Security (DHS) Science and Technology Directorate, Borders and Maritime Security Division (BMD) is identifying next-generation renewable-energy solutions for inclusion in its research portfolio. Recognizing the potential of renewable energy to contribute to border security, BMD partnered with the U.S. Department of Energy National Renewable Energy Laboratory (NREL)to examine border-security energy demands and to ensure that advances in renewable energy and energy storage lead to increased security in these areas. NREL examined the energy needs along U.S. borders--especially in remote areas--to identify opportunities to apply renewable energy solutions today and to define the near- and long-term research agendas that will position border components and activities to take advantage of renewable energy technologies in the future. This report provides a summary of the work that BMD and NREL have performed to date, outlines renewable energy technologies that have applicability to DHS operations, and highlights opportunities for future technology pilot projects or research initiatives that can supplement current technologies by developing solutions for DHS operational needs.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

GeoSoilEnviroCARS: A National Resource for Earth, Planetary, Soil and Environmental Science Research at the Advanced Photon Source

This project partially supported GeoSoilEnviroCARS (GSECARS), a national user facility for frontier research in the earth sciences using synchrotron radiation at the Advanced Photon Source (APS), Argonne National Laboratory, and the foremost synchrotron-based facility dedicated to serving the needs of the geoscience community. The DOE-supported research advanced our knowledge of the composition, structure and properties of earth materials. Frontier experiments were conducted in research areas including mineral-water interface reactions, biogeochemical cycling, flow dynamics of fluids and solids, and projects relevant to applied programs. Examples of these experimental topics include oxygen diffusion in energy-relevant materials, interface structural studies of materials undergoing electrochemical reactions, biogeochemical reactions in aquifers and deep storage reservoirs, reactions in zero-valent iron reactive barriers, and uranium.

58 GEOSCIENCES↗

Being Scientific: Saryu Fensin: Sparking innovations in both materials science and shock physics

As an enterprising materials scientist, Saryu Fensin leverages both experiments and simulations to improve understanding of how materials behave when subjected to extreme forces. Her aim is to use the complementary techniques to design and develop innovative materials for use in extreme conditions such as stockpile-focused applications. “To certify our stockpile with confidence, we need to understand the role a material’s microstructure plays in determining its dynamic properties,” Saryu says. “I’m hoping to solve this puzzle and improve our predictive capability to model material response in extreme conditions. Achieving this kind of specific controlled functionality of materials could have a big impact on the Laboratory’s national security science mission.” Her tools include molecular dynamics, Monte Carlo methods, gas gun experiments, metallography and various microscopy techniques. She looks forward to the prospect of new capabilities that could let her "see" inside materials.

36 MATERIALS SCIENCE↗

Science Drivers and Proposed Modeling Approaches for Future LASSO Scenarios

The United States Department of Energy (DOE) Atmospheric Radiation Measurement (ARM) user facility held a workshop on May 2, 2019 to gather information on different weather scenarios that could be pursued for expanding the range of atmospheric processes that could be studied by the Large-Eddy Simulation (LES) ARM Symbiotic Simulation and Observation (LASSO) data product. To date, LASSO has focused on the use of LES modeling to supplement ARM’s suite of observations at the Southern Great Plains (SGP) atmospheric observatory for days that have shallow convective clouds. Input for the workshop was obtained from the community in the form of white papers that outlined additional meteorological phenomena that LASSO could pursue. Four white papers were submitted covering a wide range of phenomena of scientific interest to the DOE atmospheric modeling community and across the ARM spectrum of observation sites: maritime clouds, deep convection, clear-air turbulence, and arctic clouds. Topic experts were invited to the workshop to discuss each scenario in terms of the science drivers, feasibility of implementation (e.g., model configuration and needed observations), timing considerations, and any open issues related to the scenario that would need further investigation.

54 ENVIRONMENTAL SCIENCES↗

EFRC Materials Science of Actinides (Final Report)

The Energy Frontier Research Center Materials Science of Actinides (MSA) conducted basic research from 2009-2019. The scientific personnel and participating institutes changed several times during the evolution of the Center, and in total included 24 senior investigators, four national laboratories, and ten universities. Workforce development was a motivating goal of the university-led Center, which included many undergraduate, graduate, and post-doctoral researchers. The center focused on the actinide elements, which arise from the sequential filling of the 5f electron orbitals. Although the specific themes evolved during the Center’s history, the final research themes were: (1) Nanoscale Cage Clusters, (2) Complex Ceramic and Metallic Materials, and (3) Materials Under Extreme Environments. To date, the Center has produced 254 peer-reviewed journal publications and book chapters that acknowledged only the EFRC funding, and an additional 161 journal publications and book chapters that acknowledged funding from the EFRC and additional sources (a few manuscripts are still in preparation). Broad highlights include: (1) Development of an extensive family of actinide nanomaterials that self-assemble in aqueous solution, an understanding of their formation mechanisms and stabilities, and possible uses in nuclear fuel cycles; (2) Establishment of facilities and methodologies to conduct high-temperature calorimetry on transuranium materials, and extensive thermodynamic-based studies of uranium and thorium compounds important to the nuclear fuel cycle; (3) A vastly improved understanding of the behavior of actinide materials in extreme conditions, including high radiation fields, temperatures, and pressures, as well coupled effects of two or more of these; (4) Development of resonance ultrasound spectroscopy and direct measurement of aging of plutonium alloys.

36 MATERIALS SCIENCE↗