SEARCH · Engineering Papers

Results for “STRESSES”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,333 records · Page 74

All sources NASA NTRS DOE OSTI

NASA NTRS2016

Retention of Compressive Residual Stresses Introduced by Shot Peening in a Powder Metal Disk Superalloy

The fatigue lives of disk superalloys can be increased by shot peening their surfaces, to induce compressive residual stresses near the surface that impede cracking there. As disk application temperatures increase for improved efficiency, the persistence of these beneficial stresses could be impaired, especially with continued fatigue cycling. The objective of this work was to study the retention of residual stresses introduced by shot peening, when subjected to fatigue and high temperatures. Fatigue specimens of powder metallurgy processed nickel-base disk superalloy ME3 were prepared with consistent processing and heat treatment. They were then shot peened using varied conditions. Strain-controlled fatigue cycles were run at room temperature and 704 C, to allow re-assessment of residual stresses.

fatigue↗

NASA NTRS2016

Surface Stress in Tropical Cyclone Observed by Scatterometer

Ocean surface wind (U) is air in motion and stress (τ) is the turbulent transport of momentum between the ocean and the atmosphere. While the strong wind of a tropical cyclone (TC) causes destruction at landfall, it is the surface stress that drags down the TC. There was almost no stress measurement except in dedicated field campaigns and the stress we used was almost entirely derived from wind through a drag coefficient (C(sub D)), as defined by C(sub D) = τ / ( ρ U(exp 2)). In TC, there is difficulty in measuring strong wind and large uncertainty in the drag coefficient.

Liu, W. Timothy↗

NASA NTRS2017

Computationally Efficient Beam Elements for Accurate Stresses in Sandwich Laminates and Laminated Composites with Delaminations

Laminated composites are prone to delamination failure due to the lack of reinforcement through the thickness. Therefore, during the design process the initiation and propagation of delaminations should be accounted for as early as possible. This paper presents computationally efficient nine degree-of-freedom (dof) and eight-dof shear locking-free beam elements using the mixed form of the refined zigzag theory (RZT(sup(m))). The corresponding nine-dof and eight-dof elements use the anisoparametric and constrained anisoparametric interpolation schemes, respectively, to eliminate shear locking in slender beams. The advantage of the present element over previous RZT beam elements is that no post-processing is required to accurately model the transverse shear stress while maintaining the computational efficiency of a low-order beam element. Comparisons with high-fidelity finite element models and three-dimensional elasticity solutions show that the elements can robustly and accurately predict the displacement field, axial stress and transverse shear stress through the thickness of a sandwich beam or a composite laminate with an embedded delamination. In fact, the accuracy and computational efficiency of predicting stresses in laminates with embedded delaminations make the present elements attractive choices for RZT-based delamination initiation and propagation methodologies available in the literature.

R. M. J. Groh↗

NASA NTRS2020

Soil Evaporation Stress Determines Soil Moisture‐Evapotranspiration Coupling Strength in Land Surface Modeling

Model‐based estimates of soil moisture (SM)‐evapotranspiration (ET) coupling strength(ρ) vary widely and are prone to bias. Here we apply numerical modeling and remote sensing to identify the process‐level source of modeledρbias with the goal of improving the fidelity of current Earth system models. Results illustrate that modeledρis most strongly determined by soil evaporation (E) stress, and (generally positive)ρmodeling bias is attributable to the oversimplification of soil texture impacts on E stress. Based on new remotely sensed estimates ofρ, we demonstrate that removingρbias via a single optimized E stress parameter leads to improved ET accuracy and resolves a well‐known modeling bias in the partitioning of ET into E and T. As such, we highlight the importance of the stress function relating E and SM and its central role in regulating land‐atmosphere coupling processes impacting local climate.

Jianzhi Dong↗

NASA NTRS2024

iGCE and MitoFlyght Spaceflight Missions: Unraveling Oxidative Stress Responses in Space

Thriving In DEep Space (TIDES) initiative aims to comprehensively understand how hostile environments such as the Moon and Mars affect human physiology. Here we present two NASA-selected spaceflight experiments under the TIDES portfolio, iGCE (Integrated Gravity Continuum Experiment) and MitoFlyght (Mitochondrial Investigation of Oxidative Stress in Flies). We hypothesize that exposure to spaceflight conditions induces oxidative stress responses that negatively impact physiology. The iGCE mission employs two well-established spaceflight models, Drosophila melanogaster and C.elegans, using Redwire’s Multi-use Variable-g Platform (MVP) hardware to assess changes in cardiac, muscle, and nervous systems across five different gravities: Hypergravity (2g), Earth (1g), Mars (0.37g), Moon (0.16g), and microgravity (ug). This mission focuses on uncovering alterations in protein homeostasis, autophagy, and mitochondrial function conserved across species. In the MitoFlyght mission to the ISS, Drosophila will be housed in the Vented Fly Box (VFB). This mission evaluates the oxidative stress response and autophagic pathway in muscle, heart, and nervous system. Additionally, we will (a) use the genetic mutant, Tor7/P to test whether increased autophagy is beneficial or a maladaptive response to the spaceflight stressors, and (b) utilize fly lines with tissue-specific expression (neuronal, muscle, and cardiac) of an antioxidant gene, SOD2 (superoxide dismutase) as a potential countermeasure. Data from these missions will be compared with previous LEO-based datasets to identify shared signatures. Furthermore, cross-species analysis of the transcriptomic data from other invertebrate and vertebrate spaceflight studies will help determine evolutionarily conserved pathways perturbed by space stressors. Overall, both these missions aim to provide crucial insights into the mechanisms underlying oxidative stress responses, synaptic changes, and heart and muscle deficits, facilitating the identification of diagnostic and therapeutic targets to mitigate the adverse health effects of long-duration space habitation. Ultimately, this research will enhance our ability to thrive in deep space and inform future missions.

Janani Iyer↗

NASA NTRSDate not supplied

Stress-Activated Positive Holes (O− in a Matrix of O2–) Cause DNA Damage in Surface-Dwelling Organisms: Unveiling Mutation-Induced Secrets of Nature

Peroxy defects consist of pairs of tightly bonded oxygen anions in the –1 valence state such as in O3X/OO\YO3 with X, Y = Si4+, Al3+ etc. They commonly occur in igneous, metamorphic and many sedimentary rocks. When such rocks are stressed by tectonic forces, peroxy defects break up, releasing highly mobile electronic charge carriers: defect electrons in the O2– sublattice, i.e. unbound O–, known as “positive holes”, h•. The h• can flow out of stressed rock volumes, spreading far and wide, causing electric currents and electrochemical reactions. This study explores how the h• impact the electron flow in the electron transport chain (ETC) of organisms on the surface of rocks such as gabbro and granite. We found that, by forming hydroxyl radicals and superoxide anions, the h• disrupt the in vivo coordination of reduction-oxidation reactions that are essential for the timing of the redox cycle. Our observations show that stress activation of h• delays the sprouting of certain plant seeds and impedes the growth of yeast cultures, Saccharomyces cerevisiae. The h• induce mutations and affect plant development as evidenced by reduced stem length and leaf size. At the same time, the h• serve as a source of abiotic oxidation, capable of forming various organic compounds in situ. Through the generation of radical species that create new carbon-carbon bonds the h• facilitate the abiotic synthesis of hydrocarbons and other organic molecules essential to life, including porphyrins. Our findings highlight the intricate interplay between positive holes, redox timing, and biological processes, revealing their significant role in influencing the growth and development of organisms in tectonically stressed crustal environments. Understanding these effects enhances our broader comprehension of redox biology and the influence of environmental factors on cellular development in natural settings.

astrobiology↗

DOE OSTI2020

Cement having stress-indicating properties

A system and method measures subterranean stress. The system and method includes a cement mixture that is mixed with water to set as a solid and a stress measuring-medium having piezospectroscopic properties that directly reveals stress in situ within the cement mixture in response to a photo stimulation. The stress measuring-medium combines with the cement mixture as a dry blend before being combined with water.

36 MATERIALS SCIENCE↗

DOE OSTI2021

Distributed measurement of minimum and maximum in-situ stress in substrates

A system for performing distributed measurements of in-situ stress includes an expandable element with at least one fiber optic sensor. The expandable element can be positioned at various depths in a hole in a substrate. A pressurizing device expands (and contracts) the expandable element when the expandable element is inserted in the hole in the substrate to exert pressure on the hole wall. A pressure sensor provides a sensor output indicative of a pressure applied to the hole wall by the expandable element. The fiber optic sensor and an optical interrogator measure strain along a length of the sensor in a continuous, high spatial resolution manner Based on the measured strain and pressure sensor output, the system determines various properties of the substrate such as, minimum principal stress, maximum principal stress, and/or principal stress direction associated with one or more fractures in the substrate, as well as substrate modulus.

Ohanian, III, Osgar John↗

DOE OSTI2022

Demystify the 1.1 Factor for Ultimate Tensile Strength Above Room Temperature in Development of the Code Stress Tables

As the Boiler and Pressure Vessel Code increasingly gains popularity worldwide, it is not uncommon that many users are mystified by the 1.1 factor required for ultimate tensile strength above room temperature in developing the allowable design stresses of Section II Part D Stress Tables. Questions often arise about the origin and purpose of the factor, the reason for it not applied to the yield strength, its due considerations when evaluating an alloy for acceptance to construction use from the perspective of the alloy’s tested tensile strength value, and more. Not knowing reliable sources for explicit explanations, some users tend to misinterpret the factor, abuse its application, incorrectly define their alloy acceptance or qualification criteria, and mistakenly manipulate the safety margin in structural component design.To help the Code users who struggle with these frequent and confusing issues, particularly those in nuclear industry where rigorous criteria are required for component design and alloy acceptance or qualification, this paper is intended to demystify the 1.1 factor and facilitate knowledgeable interpretation and use of the Section II Part D Stress Tables as well as relevant Mandatory Appendices.A brief review is first given on the background of the 1.1 factor, followed by a summary of its application in the Stress Tables. The provenance and purpose of the factor are then discussed in detail with graphic examples. Finally, current applicability and necessity of the factor are considered through a demonstration using example alloys.

Ren, Weiju↗

DOE OSTI2022

Evaluation of Bifacial Modules and PV Technologies with Combined-Accelerated Stress Testing

In view of the increasing interest and market share of bifacial cells and modules, suitable substrates such as glass and transparent backsheets along with ethylene vinyl acetate (EVA) and polyolefin elastomer (POE) encapsulants were examined in combined-accelerated stress testing (C-AST) to evaluate and compare degradation modes. Testing with both monofacial and bifacial cells, we found glass-glass modules with monofacial cells led to greater grid finger breakage than those with polymeric backsheets. This is attributed to previous x-ray topography work showing higher stress in cells in glass-glass modules than glass backsheet modules. Consistent with the objectives of C-AST, which stresses modules at levels corresponding to the limits seen in the natural environment, we observed the UV-fluorescence signatures of modules tested in C-AST (considering the degradation associated with developing chromophores, moisture penetration and photobleaching effects) to be like those in fielded modules, more so than other chamber stress testing implemented for comparison. Finally, among multiple cell degradation modes that we observed such as light-induced degradation (LID), we differentiated susceptibility to potential-induced degradation (PID) on the back of the bifacial Passivated Emitter Back Cells (PERC) in C-AST. Confirming with ex-situ tests, we found polarization-type PID most prevalent in glass/glass modules with EVA as would be anticipated considering the greater leakage current through such module encapsulation. Unlike PID tests performed in the dark, which can lead to false positive PID test results, field-representative illumination is experienced by the modules on the front and back side while -1200 V system voltage is applied in C-AST, supporting the conclusion that this module type would be susceptible to PID in the field.

bifacial modules↗

DOE OSTI2023

Device architectures having engineered stresses

The present disclosure relates to a method that includes depositing a spalling layer onto a surface that includes a substrate, depositing a device comprising a III-V material onto the spalling layer, resulting in the forming of a stack, and dividing the stack substantially at a plane positioned within the spalling layer to form a first portion that includes the substrate and a second portion that includes the PV device, where the spalling layer includes a first layer configured to provide a compressive stress and a second layer configured to provide a tensile stress, the first layer and the second layer form an interface, the dividing occurs as result of the interface, and the compressive stress and the tensile stress are strain-balanced so that a total strain within the spalling layer is approximately zero.

Steiner, Myles Aaron↗

DOE OSTI2023

Calibration technique of wall shear stress sensors using oscillating plate

Disclosed are a system and methods for calibrating wall shear stress sensors. The system includes an oscillating plate coupled to an actuator and mounted on a rolling elements, and one or more sensors coupled to a height adjusting device. The system can further comprise a height control rod coupled to a height control base and a sensor holder configured to house the one or more sensors and supported on a connector, the connector configured to be rotatably disposed about the height control rod. The system can be calibrated by causing the actuator to oscillate the oscillating plate at a frequency, sensing, using the one or more sensors, shear stress at a wall, the shear stress at the wall being associated with a velocity field, and determining a theoretical wall shear stress based on fluid properties, the frequency, and the height of the one or more sensors above the oscillating plate.

Freidkes, Brett R.↗

DOE OSTI2022

TECHNICAL BACKGROUND FOR THE UPDATE AND EXTENSION OF THE TIME-DEPENDENT ALLOWABLE STRESSES OF TYPE 304H AND 316H STAINLESS STEELS

Type 304H and 316H stainless steels are codified in the ASME Boiler and Pressure Vessel Code for Section III, Division 5, Class A construction for up to 1500F (816C) and 300,000 hours. Extension of the design lifetimes to 500,000 hours has been undertaken by various research projects and by the ASME Section III, Division 5 Code Committees. Due to a long-standing issue related to non-classical creep behavior on the use of the time to the onset of tertiary creep as one of the time-dependent allowable stress criteria, little progress was made in the extension of the time-dependent allowable stresses for Type 304H and 316H stainless steels. A recent effort by Dabrow and Nestell (Impact of Tertiary Creep on Time Dependent Allowable Stresses for Type 304H and 316H Stainless Steels, Report 0300-0003-RPT-001, MPR Associates, Alexandria, VA, 2020) has provided a rational method for the treatment of the highly variable data for the time to onset of tertiary creep. In this paper, the background formulas for determining the time-dependent allowable stress values of Type 304H and 316H stainless steels, as assembled from relevant project work, are presented. These updates and extensions are being recommended to the ASME Code committees for approval, and are subject to change upon feedback from ASME Section III Code committees.

304/316 life extension↗

DOE OSTI2023

MOOSE Optimization Module Overview: Application to Residual Stress Inversion in Nuclear Fuel Plates

Manufacturing methods, material selections and unique plate geometries used in low enriched uranium plate fuels for the High Performance Research Reactor (HPRR) have led to concerns about the residual stresses effect on bond strength of the fuel/cladding interfaces and overall fuel performance under irradiation. The current HPRR plate fuel test program performed residual stress calculations using the contour method with experimental displacement data obtained by incrementally cutting the plate fuel. In this work, we use a gradient based inverse optimization module developed within the MOOSE framework to estimate normal and shear residual stresses within the plate fuels using displacement data taken from a cut placed in the HPRR fuel plate. These results are verified against residual stress calculations obtained from the contour method. The inversion protocol used in this work utilizes two meshes to separately discretize the physics and parameter space. This allows a fine mesh to be used to fully resolve the physics and geometry of the forward problem. A coarser mesh is used to resolve the parameter space with spatially varying mesh density determined from a sensitivity analysis. The adaptive resolution of the parameter space essentially has the effect of regularization as it is designed to achieve the bias-variance tradeoff.

42 ENGINEERING↗

DOE OSTI2024

Impact of Drought Stress on Sorghum bicolor Yield, Deconstruction, and Microbial Conversion Determined in a Feedstocks-to-Fuels Pipeline

Sorghum is an attractive feedstock for biobased fuel and chemical production because it is familiar to farmers, naturally drought tolerant, and versatile as a food, feed, and fuel crop. Although sorghum is a promising feedstock, particularly in regions that experience drought stress, little is known about how drought conditions impact the ease of conversion of sorghum to fuels and products. This study combines agronomic field trials with a high-throughput experimental pipeline to explore the field performance and liquid biofuel (bisabolene) yields resulting from three sorghum types (photosensitive forage sorghum, optimized grain sorghum, and drought-resistant grain sorghum) grown under pre- and postflowering water limitations in two different California locations. Multiple drought treatments are compared to the control, as the timing (preflowering versus postflowering) of drought stress elicits different survival strategies and corresponding impacts on yield and composition. Forage-type sorghum maintained the highest biomass yields across all irrigation conditions and locations. Glucose and xylose yields resulting from ionic liquid pretreatment and enzymatic saccharification were not significantly impacted by irrigation treatments but differed by location and genotype. However, Rhodosporidium toruloides grown on the resulting plant hydrolysates unexpectedly produced higher titers of bisabolene for drought-stressed sorghum samples regardless of genotype.

09 BIOMASS FUELS↗

DOE OSTI2025

From quantitative trait loci towards mechanisms: Linkage Integration Hypothesis Testing (LIgHT) sheds light on the mechanisms of genetically modulated stress tolerance

The goal of this work is to assess the mechanistic bases of natural genetic variations in plant responses of photosynthesis to stress. To achieve this goal, we devised the Linkage Integration Hypothesis Testing (LIgHT) approach, comparing chromosomal locations of quantitative trait loci (QTLs) for multiple phenotypes to distinguish between hypothetical mechanisms. As a use case, we explored genetic variations in photosynthesis-related processes under chilling stress in recombinant inbred lines of cowpea ( Vigna unguiculata L. Walp.). We focused on photosynthesis-related parameters measurable in high throughput and indicative of proposed chilling responses, including the states of PSI and PSII, photoprotective non-photochemical quenching, PSII photodamage, and nyctinastic leaf movements (NLMs). The patterns of QTL linkages indicated that chilling stress tolerance is genetically controlled by avoiding PSII photodamage rather than PSI damage or NLMs. This model was validated in a separate experiment measuring the rates of PSII photodamage and repair. Additional linkages suggest that chilling-induced damage to PSII is controlled by the thylakoid proton motive force and redox state of PSII. This regulation appears to be modulated by thylakoid fatty acid composition, previously associated with the same genetic loci and now supported by broader mechanistic evidence. We propose that the LIgHT approach can be broadly applied to test mechanisms underlying genetic variations.

MultispeQ↗

DOE OSTI2023

Utah FORGE 2-2446: Closing the Loop Between In-situ Stress Complexity and EGS Fracture Complexity - Workshop Presentation

This is a presentation on the Closing the Loop Between In-situ Stress Complexity and EGS Fracture Complexity project by Lawrence Livermore National Laboratory, presented by Dr. Matteo Cusini. The project's objective was to employ a combination of high-fidelity simulations and true-triaxial block fracturing tests at high temperature to explore the intricate relationship between in-situ stress and hydraulic fracture patterns and better characterize the in-situ stress at Utah FORGE. This presentation was featured in the Utah FORGE R&D Annual Workshop on September 7, 2023. The workshop provided a valuable opportunity to explore the progress made in each of the 17 Research and Development projects funded under Solicitation 2020-1 which aim to enhance our understanding of the crucial factors influencing the development of Enhanced Geothermal Systems (EGS) reservoirs and resources.

15 GEOTHERMAL ENERGY↗

DOE OSTI2021

Synergies and Entanglement in Secondary Cell Wall Development and Abiotic Stress Response in Trees

A major challenge for sustainable food, fuel, and fiber production is simultaneous genetic improvement of yield, biomass quality, and resilience to episodic environmental stress and climate change. For Populus and other forest trees, quality traits involve alterations in the secondary cell wall (SCW) of wood for traditional uses, as well as for a growing diversity of biofuels and bioproducts. Alterations in wood properties that are desirable for specific end uses can have negative effects on growth and stress tolerance. Understanding of the diverse roles of SCW genes is necessary for the genetic improvement of fast-growing, short-rotation trees that face perennial challenges in their growth and development. Here, we review recent progress into the synergies and antagonisms of SCW development and abiotic stress responses, particularly, the roles of transcription factors, SCW biogenesis genes, and paralog evolution.

54 ENVIRONMENTAL SCIENCES↗