Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “STAR MODELS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,333 records · Page 74

10 micron imaging of UZ Tauri: Evidence for circumstellar disk clearing due to a close companion star

We present 10 micrometer images of the multiple T Tauri star system UZ Tau taken with the Berkeley mid-infrared array camera at the United Kingdom Infrared Telescope (UKIRT) and evidence that UZ Tau E and W are a common proper pair. The mid-infrared emission is resolved for the first time into the two components UZ Tau E and UZ Tau W. The mid-infrared excess deduced for UZ Tau W appears to be much lower than that observed for UZ Tau E. This excess emission is consistent with an optically thin circumstellar disk in the case of UZ Tau W, whereas UZ Tau E's excess is consistent with an optically thick disk. We suggest that the close binary star pair in UZ Tau W is responsible for the observed difference between UZ Tau E and W's mid-infrared excess. In the proposed model, the binary star interacts with the local circumstellar disk environment and clears out much of the material inside its orbital radius (approximately 50 AU). As a result, the hot dust, observed at mid-infrared wavelengths, in UZ Tau W is suppressed compared to its 'wider' companion UZ Tau E. This scenario can also plausibly account for differences observed in UZ Tau E's and UZ Tau W's optical line strengths and profiles.

Chez, A. M.↗

Design and Analysis of the Rocket Experiment Demonstration of a Soft X-Ray (REDSoX) Polarimeter Mirror Module Assembly

The Rocket Experiment Demonstration of a Soft X-ray (REDSoX) Polarimeter is a NASA sounding rocket experiment that is designed to demonstrate the technology necessary for measuring linear X-ray polarization as a function of energy below 1 keV. In astrophysics, soft X-ray spectropolarimetry will be used to probe the nature of acceleration mechanisms in quasar jets and to test models of neutron star structure. NASA Marshall Space Flight Center (MSFC) has designed a grazing-incidence mirror module assembly (MMA) for the REDSoX payload and used Finite Element Modelling Software (ANSYS) to perform structural analysis of the design. In this paper we will describe the overall design of the REDSoX MMA, details of the analysis techniques used for predicting factor of safety in the mirror adhesive bonds and structural components, the buckling analysis of the outer housing, and the raytrace technique used to estimate the effect of gravity sag on optical performance during ground testing.

Structural Analysis↗

GLOBAL MODELING OF X-RAY SPECTRA PRODUCED IN O-TYPE STAR WINDS

High-resolution X-ray spectra of O-type stars revealed less wind absorption than expected from smooth winds with conventional mass-loss rates. Various solutions have been proposed, including porous winds, optically thick clumps, or an overall reduction of the mass-loss rates. The latter has a strong impact on the evolution of the star. Our final goal is to analyze high-resolution X-ray spectra of O-type stars with a multi-temperature plasma model in order to determine crucial stellar and wind parameters such as the mass-loss rate, the CNO abundances, and the X-ray temperature plasma distribution in the wind. In this context we are developing a modeling tool to calculate synthetic X-ray spectra. We present here the main ingredients and physics necessary for such a work. Our code uses the most recent version of the AtomDB emissivities to compute the intrinsic emissivity of the hot plasma as well as the CMFGEN model atmosphere code to evaluate the opacity of the cool wind. Following the comparison between two formalisms of stellar wind fragmentation, we introduce, for the first time in X-rays, the effects of a tenuous inter-clump medium. We then explore the quantitative impact of different model parameters on the X-ray spectra such as the position in the wind of the X-ray emitting plasma. For the first time, we also show that the two formalisms of stellar wind fragmentation yield different results, although the differences for individual lines are small and can probably not be tested with the current generation of X-ray telescopes. As an illustration of our method, we compare various synthetic line profiles to the observed O VIII {lambda}18.97 line in the spectrum of {zeta} Puppis. We illustrate how different combinations of parameters can actually lead to the same morphology of a single line, underlining the need to analyze the whole spectrum in a consistent way when attempting to constrain the parameters of the wind.

79 ASTRONOMY AND ASTROPHYSICS↗

A direct dynamical measurement of the Milky Way's disk surface density profile, disk scale length, and dark matter profile at 4 kpc ≲ R ≲ 9 kpc

We present and apply rigorous dynamical modeling with which we infer unprecedented constraints on the stellar and dark matter mass distribution within our Milky Way (MW), based on large sets of phase-space data on individual stars. Specifically, we model the dynamics of 16,269 G-type dwarfs from SEGUE, which sample 5 kpc < R{sub GC} < 12 kpc and 0.3 kpc ≲ |Z| ≲ 3 kpc. We independently fit a parameterized MW potential and a three-integral, action-based distribution function (DF) to the phase-space data of 43 separate abundance-selected sub-populations (MAPs), accounting for the complex selection effects affecting the data. We robustly measure the total surface density within 1.1 kpc of the mid-plane to 5% over 4.5 kpc < R{sub GC} < 9 kpc. Using metal-poor MAPs with small radial scale lengths as dynamical tracers probes 4.5 kpc ≲ R{sub GC} ≲ 7 kpc, while MAPs with longer radial scale lengths sample 7 kpc ≲ R{sub GC} ≲ 9 kpc. We measure the mass-weighted Galactic disk scale length to be R{sub d} = 2.15 ± 0.14 kpc, in agreement with the photometrically inferred spatial distribution of stellar mass. We thereby measure dynamically the mass of the Galactic stellar disk to unprecedented accuracy: M {sub *} = 4.6 ± 0.3 + 3.0 (R {sub 0}/ kpc – 8) × 10{sup 10} M {sub ☉} and a total local surface density of Σ{sub R{sub 0}}(Z=1.1 kpc)=68 ± 4 M{sub ⊙} pc{sup −2} of which 38 ± 4 M {sub ☉} pc{sup –2} is contributed by stars and stellar remnants. By combining our surface density measurements with the terminal velocity curve, we find that the MW's disk is maximal in the sense that V {sub c,} {sub disk}/V {sub c,} {sub total} = 0.83 ± 0.04 at R = 2.2 R{sub d} . We also constrain for the first time the radial profile of the dark halo at such small Galactocentric radii, finding that ρ{sub DM}(r; ≈R {sub 0})∝1/r {sup α} with α < 1.53 at 95% confidence. Our results show that action-based DF modeling of complex stellar data sets is now a feasible approach that will be fruitful for interpreting Gaia data.

79 ASTRONOMY AND ASTROPHYSICS↗

A DYNAMIC DENSITY FUNCTIONAL THEORY APPROACH TO DIFFUSION IN WHITE DWARFS AND NEUTRON STAR ENVELOPES

We develop a multicomponent hydrodynamic model based on moments of the Born–Bogolyubov–Green–Kirkwood–Yvon hierarchy equations for physical conditions relevant to astrophysical plasmas. These equations incorporate strong correlations through a density functional theory closure, while transport enters through a relaxation approximation. This approach enables the introduction of Coulomb coupling correction terms into the standard Burgers equations. The diffusive currents for these strongly coupled plasmas is self-consistently derived. The settling of impurities and its impact on cooling can be greatly affected by strong Coulomb coupling, which we show can be quantified using the direct correlation function.

79 ASTRONOMY AND ASTROPHYSICS↗

H I Lyman-alpha equivalent widths of stellar populations

We have compiled a library of stellar Lyman-alpha (Lyα) equivalent widths in O and B stars using the model atmosphere codes CMFGEN and TLUSTY, respectively. The equivalent widths range from about 0 to 30 Å in absorption for early-O to mid-B stars. The purpose of this library is for the prediction of the underlying stellar Lyα absorption in stellar populations of star-forming galaxies with nebular Lyα emission. We implemented the grid of individual equivalent widths into the Starburst99 population synthesis code to generate synthetic Lyα equivalent widths for representative star formation histories. A starburst observed after 10 Myr will produce a stellar Lyα line with an equivalent width of ∼ – 10 ± 4 Å in absorption for a Salpeter initial mass function. The lower value (deeper absorption) results from an instantaneous burst, and the higher value (shallower line) from continuous star formation. Depending on the escape fraction of nebular Lyα photons, the effect of stellar Lyα on the total profile ranges from negligible to dominant. If the nebular escape fraction is 10%, the stellar absorption and nebular emission equivalent widths become comparable for continuous star formation at ages of 10-20 Myr.

79 ASTRONOMY AND ASTROPHYSICS↗

Modelling the stellar halo with RR-Lyrae stars

ABSTRACT A seven-parameter distribution function (DF) is fitted to $20\, 000$ RR-Lyrae stars for which only astrometric data are available. The observational data are predicted by the DF in conjunction with the gravitational potential of a self-consistent model Galaxy defined by DFs for the dark halo, the bulge, and a four-component disc. Tests of the technique developed to deal with missing line-of-sight velocities show that adding such velocities tightens constraints on the DF only slightly. The recovered model of the RR-Lyrae population confirms that the population is flattened and has a strongly radially biased velocity distribution. At large radii, its density profile tends to ρ ∼ r−4.5 but no power law provides a good fit inside the solar sphere. The model is shown to provide an excellent fit to the data for stars brighter than r = 16.5 but at certain longitudes it predicts too few faint stars at Galactocentric radii $\sim 20\, \mathrm{kpc}$, possibly signalling that the halo is not axisymmetric. The DF is used to predict the velocity distribution of BHB stars for which space velocities are available. The z components are predicted successfully but too much anisotropy in the vRvϕ plane is expected.

Li, Chengdong↗

Astrophysical Constraints on the Symmetry Energy and the Neutron Skin of 208 Pb with Minimal Modeling Assumptions

The symmetry energy and its density dependence are crucial inputs for many nuclear physics and astrophysics applications, as they determine properties ranging from the neutron-skin thickness of nuclei to the crust thickness and the radius of neutron stars. Recently, PREX-II reported a value of 0.283 ± 0.071 fm for the neutron-skin thickness of 208 Pb, implying a slope parameter L = 106 ± 37 MeV, larger than most ranges obtained from microscopic calculations and other nuclear experiments. We use a nonparametric equation of state representation based on Gaussian processes to constrain the symmetry energy S 0 , L, and $R^{^{208}Pb}_{skin}$ directly from observations of neutron stars with minimal modeling assumptions. The resulting astrophysical constraints from heavy pulsar masses, LIGO/Virgo, and NICER clearly favor smaller values of the neutron skin and L, as well as negative symmetry incompressibilities. Finally, combining astrophysical data with PREX-II and chiral effective field theory constraints yields S 0 = $33.0^{+2.0}_{-1.8}$ MeV , L = $53^{+14}_{-15}$ MeV, and $R^{^{208}Pb}_{skin} = 0.17^{+0.04}_{-0.04}$ fm.

79 ASTRONOMY AND ASTROPHYSICS↗

Quasi-static winds from neutron stars

A series of numerical models is constructed for radiatively driven, quasi-static winds from the surfaces of hot neutron stars. A mathematical technique is devised that in many cases facilitates the integration of the fluid equations in the vicinity of the sonic point, and an improved treatment of radiative transfer is developed that is appropriate to the exotic physical conditions encountered in the models. Boundary conditions which are more realistic than previous ones are used in these models. In agreement with earlier studies, it is found that radiatively driven winds are likely to be directly relevant to the existence of precursors in fast X-ray transients and to apparent radius variations during the course of some type I bursts, and that the presence of such a wind should prevent the bolometric luminosity of a neutron star from exceeding the Eddington limit by more than a small fractional amount. Formulas describing the wind models are presented which are usable as boundary conditions for calculations of the evolution of the deeper, hydrostatic layers of a neutron-star envelope.

Joss, Paul C.↗

Dynamics of plane stellar systems.

The evolution of initially balanced rotating disks of stars is investigated with a computer model for isolated disks of stars. An isolated, initially cold balanced disk is found to be violently unstable. Adding a sufficient amount of velocity dispersion will stabilize all small-scale disturbances. However, the disks are still unstable against slowly growing long wave-length modes and after about two rotations most disks tend to assume a bar-shaped structure. It is found that the final mass distribution over most of the disk can be closely approximated by an exponential variation, irrespective of the initial mass distribution. The gravitational two-stream instability is investigated by means of a modified computer model for infinite doubly periodic stellar systems.

Hohl, F.↗

Dynamics of plane stellar systems.

The evolution of initially balanced rotating disks of stars is investigated with a computer model for isolated disks of stars. An isolated, initially cold balanced disk is found to be violently unstable. Adding a sufficient amount of velocity dispersion will stabilize all small-scale disturbances. However, the disks are still unstable against slowly growing long wave-length modes and after about two rotations most disks tend to assume a bar-shaped structure. It is found that the final mass distribution over most of the disk can be closely approximated by an exponential variation, irrespective of the initial mass distribution. The gravitational two-stream instability is investigated by means of a modified computer model for infinite doubly periodic stellar systems.

Hohl, F.↗

Neutrino fast flavor oscillations with moments: Linear stability analysis and application to neutron star mergers

Providing an accurate modeling of neutrino physics in dense astrophysical environments such as binary neutron star mergers presents a challenge for hydrodynamic simulations. Nevertheless, understanding how flavor transformation can occur and affect the dynamics, the mass ejection, and the nucleosynthesis will need to be achieved in the future. Computationally expensive, large-scale simulations frequently evolve the first classical angular moments of the neutrino distributions. By promoting these quantities to matrices in flavor space, we develop a linear stability analysis of fast flavor oscillations using only the first two “quantum” moments, which notably requires generalizing the classical closure relations that appropriately truncate the hierarchy of moment equations in order to treat quantum flavor coherence. After showing the efficiency of this method on a well-understood test situation, we perform a systematic search of the occurrence of fast flavor instabilities in a neutron star merger simulation. Here, we discuss the successes and shortcomings of moment linear stability analysis, as this framework provides a time-efficient way to design and study better closure prescriptions in the future.

79 ASTRONOMY AND ASTROPHYSICS↗

Dark matter or regular matter in neutron stars? How to tell the difference from the coalescence of compact objects

The mirror twin Higgs model is a candidate for (strongly-interacting) complex dark matter, which mirrors SM interactions with heavier quark masses. A consequence of this model are mirror neutron stars—exotic stars made entirely of mirror matter, which are significantly smaller than neutron stars and electromagnetically dark. This makes mergers of two mirror neutron stars detectable and distinguishable in gravitational wave observations, but can we observationally distinguish between regular neutron stars and those that may contain some mirror matter? This is the question we study in this paper, focusing on two possible realizations of mirror matter coupled to standard model matter within a compact object: (i) mirror matter captured by a neutron star and (ii) mirror neutron star-neutron star coalescences. Regarding (i), here we find that (nonrotating) mirror-matter-admixed neutron stars no longer have a single mass-radius sequence, but rather exist in a two-dimensional mass-radius plane. Regarding (ii), we find that binary systems with mirror neutron stars would span a much wider range of chirp masses and completely different binary Love relations, allowing merger remnants to be very light black holes. The implications of this are that gravitational wave observations with advanced LIGO and Virgo, and x-ray observations with NICER, could detect or constrain the existence of mirror matter through searches with wider model and parameter priors.

79 ASTRONOMY AND ASTROPHYSICS↗

Grain Formation around the AGB Star L2 Puppis Based On ALMA Observations

While models of grain formation in the outflows of carbon-rich stars have been relatively successful, models of outflows from oxygen-rich, asymptotic giant branch stars have been less fortunate. Under current modeling, it is difficult to produce sufficient amounts of silicate grains with high enough opacity to form a dust-driven wind from these stars. To investigate the cause of this difference, this work is a comparison between typical outflow model results and a model using input from Atacama Large Millimeter/submillimeter Array observations of L2Puppis. The temperatures from these observations are much lower than would typically be used in the standard outflow model. In addition, the observed gas densities are much higher than predicted from typical outflow models. Both of these differences make the formation of silicate grains much more favorable than predicted in current outflow models. We then explore the effects of other possible nonideal conditions including the efficiency of cluster growth prior to nucleation, the efficiency of grain growth following nucleation and the variation of grain coupling to stellar radiation during grain growth. Finally, we calculate the potential enhancement in grain production based on possible increased refractory abundances resulting from the vaporization of millimeter-scale and larger particles left over from the presence of a former planetary system.

Joseph A Nuth↗

DEPENDENCE OF X-RAY BURST MODELS ON NUCLEAR REACTION RATES

X-ray bursts are thermonuclear flashes on the surface of accreting neutron stars, and reliable burst models are needed to interpret observations in terms of properties of the neutron star and the binary system. We investigate the dependence of X-ray burst models on uncertainties in (p, γ ), ( α , γ ), and ( α , p) nuclear reaction rates using fully self-consistent burst models that account for the feedbacks between changes in nuclear energy generation and changes in astrophysical conditions. A two-step approach first identified sensitive nuclear reaction rates in a single-zone model with ignition conditions chosen to match calculations with a state-of-the-art 1D multi-zone model based on the Kepler stellar evolution code. All relevant reaction rates on neutron-deficient isotopes up to mass 106 were individually varied by a factor of 100 up and down. Calculations of the 84 changes in reaction rate with the highest impact were then repeated in the 1D multi-zone model. We find a number of uncertain reaction rates that affect predictions of light curves and burst ashes significantly. The results provide insights into the nuclear processes that shape observables from X-ray bursts, and guidance for future nuclear physics work to reduce nuclear uncertainties in X-ray burst models.

79 ASTRONOMY AND ASTROPHYSICS↗

An evolutionary model for collapsing molecular clouds and their star formation activity. II. Mass dependence of the star formation rate

We discuss the evolution and dependence on cloud mass of the star formation rate (SFR) and efficiency (SFE) of star-forming molecular clouds (MCs) within the scenario that clouds are undergoing global collapse and that the SFR is controlled by ionization feedback. We find that low-mass clouds (M {sub max} ≲ 10{sup 4} M {sub ☉}) spend most of their evolution at low SFRs, but end their lives with a mini-burst, reaching a peak SFR ∼10{sup 4} M {sub ☉} Myr{sup –1}, although their time-averaged SFR is only (SFR) ∼ 10{sup 2} M {sub ☉} Myr{sup –1}. The corresponding efficiencies are SFE{sub final} ≲ 60% and (SFE) ≲ 1%. For more massive clouds (M {sub max} ≳ 10{sup 5} M {sub ☉}), the SFR first increases and then reaches a plateau because the clouds are influenced by stellar feedback since earlier in their evolution. As a function of cloud mass, (SFR) and (SFE) are well represented by the fits (SFR) ≈ 100(1 + M {sub max}/1.4 × 10{sup 5} M {sub ☉}){sup 1.68} M {sub ☉} Myr{sup –1} and (SFE) ≈ 0.03(M {sub max}/2.5 × 10{sup 5} M {sub ☉}){sup 0.33}, respectively. Moreover, the SFR of our model clouds follows closely the SFR-dense gas mass relation recently found by Lada et al. during the epoch when their instantaneous SFEs are comparable to those of the clouds considered by those authors. Collectively, a Monte Carlo integration of the model-predicted SFR(M) over a Galactic giant molecular cloud mass spectrum yields values for the total Galactic SFR that are within half an order of magnitude of the relation obtained by Gao and Solomon. Our results support the scenario that star-forming MCs may be in global gravitational collapse and that the low observed values of the SFR and SFE are a result of the interruption of each SF episode, caused primarily by the ionizing feedback from massive stars.

79 ASTRONOMY AND ASTROPHYSICS↗

Detailed examination of astrophysical constraints on the symmetry energy and the neutron skin of 208 Pb with minimal modeling assumptions

We report the symmetry energy and its density dependence are pivotal for many nuclear physics and astrophysics applications, as they determine properties ranging from the neutron-skin thickness of nuclei to the crust thickness and the radius of neutron stars. Recently, PREX-II reported a value of 0.283 ± 0.071 fm for the neutron-skin thickness of 208 Pb, $R^{^{208}Pb}_{skin}$, implying a symmetry-energy slope parameter L of 106 ± 37 MeV, larger than most ranges obtained from microscopic calculations and other nuclear experiments. We use a nonparametric equation of state representation based on Gaussian processes to constrain the symmetry energy S 0 , L, and $R^{^{208}Pb}_{skin}$ directly from observations of neutron stars with minimal modeling assumptions. The resulting astrophysical constraints from heavy pulsar masses, LIGO/Virgo, and NICER favor smaller values of the neutron skin and L, as well as negative symmetry incompressibilities. Combining astrophysical data with chiral effective field theory (χEFT) and PREX-II constraints yields S 0 = 33.0$^{+2.0}_{-1.8}$ MeV, L = 53$^{+14}_{-15}$ MeV, and $R^{^{208}Pb}_{skin}$ = 0.17 $^{+0.04}_{-0.04}$ fm. We also examine the consistency of several individual χEFT calculations with astrophysical observations and terrestrial experiments. We find that there is only mild tension between χ EFT, astrophysical data, and PREX-II's $R^{^{208}Pb}_{skin}$ measurement (p value = 12.3%) and that there is excellent agreement between χEFT, astrophysical data, and other nuclear experiments.

74 ATOMIC AND MOLECULAR PHYSICS↗

Guide to CFD-Chemical Model for Spent Fuel Storage

This outlines the steps that were used to create the CFD model in Star-CCM+ to simulate the 50 year thermal history of ATR fuel stored in DOE sealed canisters. Then this goes through the steps to set up the processing the model results for the one-way coupled Cantera chemical model. The next part describes the process for setting up the 50-year Cantera model in Python. The goal of this is to document the procedure for quality assurance, as well as in the event another person will need to run the process to generate additional results.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗