Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “STANDING WAVES”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,333 records · Page 74

ERTS-1 anomalous dark patches

The author has identified the following significant results. Through combined use of imagery from ERTS-1 and NOAA-2 satellites was found that when the sun elevation exceeds 55 degrees, the ERTS-1 imagery is subject to considerable contamination by sunlight even though the actual specular point is nearly 300 nautical miles from nadir. Based on sea surface wave slope information, a wind speed of 10 knots will theoretically provide approximately 0.5 percent incident solar reflectance under observed ERTS multispectral scanner detectors. This reflectance nearly doubles under the influence of a 20 knot wind. The most pronounced effect occurs in areas of calm water where anomalous dark patches are observed. Calm water at distances from the specular point found in ERTS scenes will reflect no solar energy to the multispectral scanner, making these regions stand out as dark areas in all bands in an ocean scene otherwise comprosed by a general diffuse sunlight from rougher ocean surfaces. Anomalous dark patches in the outer parts of the glitter zones may explain the unusual appearance of some scenes.

Strong, A. E.↗

The Submillimeter Wave Astronomy Satellite

The Submillimeter Wave Astronomy Satellite (SWAS) mission is dedicated to the study of star formation and interstellar chemistry. To carry out this mission, SWAS will survey dense (n(sub H2) greater than 10(exp 3) cm(exp -3)) molecular clouds within our galaxy in either the ground-state of a low-lying transition of five astrophysically important species: H2O, H2O-18, O2, CI, and CO-13. By observing these lines SWAS will: (1) test long-standing theories that predict that these species are the dominant coolants of molecular clouds during the early stages of their collapse to form stars and planets, and (2) supply heretofore missing information about the abundanceof key species central to the chemical models of dense interstellar gas. SWAS will employ two independent Schottky barrier diode mixers, passively cooled to approx. 150 K, coupled to a highly efficient 54 x 68 cm off-axis Cassegrain antenna. During its two year mission, SWAS will observe giant and dark cloud cores with the goal of detecting or setting an upper limit on the water abundance of 3 x 10(exp -6) and on th molecular oxygen abundances of 2 x 10(exp -6), both relative to H2. In addition, advantage will be taken of SWAS's relatively large beamsize of 3.2 x 4.0 arcminutes at 551 GHz and 3.6 x 4.5 arcminutes at 492 GHz to obtain large-area (approx. 1 deg x 1 deg) maps of giant and dark clouds in the CO-13 and CI lines. SWAS is scheduled for launch in mid-1995.

Melnick, Gary J.↗

Inner Heliosphere Science

The future HELEX mission concept by NASA/ESA to the inner heliosphere (0.22 AU < r < 0.7 AU) and the possibility of a Solar Probe mission to the Sun (9.5 Rs < r < 0.7 AU) will allow for a comprehensive exploration of the inner heliosphere with the prospect for major discoveries and resolution of long standing issues of heliospheric science. The new Solar Probe mission being considered is equatorial and will allow exploration of the streamer belt region from a closeup perspective. We'll be able to look for the suprathermal ion population some think are necessary as the seed population for SEP events, look closeup at CMEs and formation of shock inside the Alfven critical point, probe the outer boundaries of the streamer belts, reconnection within the current sheets, MHD waves and turbulence and the inner source where they are felt to form and may reveal themselves as pickup ions. All will be launched around Solar Minimum with rise in solar activity toward the end of these missions. Extended missions could then occur during Solar Maximum. I'll talk about the complement of instrumentation and mission strategies.

Sillter, Edward C., Jr.↗

Interstellar Dust Grain Alignment

Dust induced polarization is an efficient probe of the interstellar magnetic field. The combination of short wavelength dichroic extinction polarimetry with far-infrared/sub-mm wave emission observations, using modern instruments, allow us to measure the polarization from diffuse gas to star forming cores. With our improved understanding of the physics of grain alignment we can now better interpret the observations and evaluate the importance of the magnetic field. Radiative Alignment Torque (RAT) grain-alignment has been observationally confirmed, but some aspects and details are still being clarified. The quantitative theoretical frame work provided by RAT theory, also allows long standing questions about the interstellar environment and dust characteristics to be addressed anew - including dust composition and structure. I will review the basics of RAT alignment and its observational support and discuss some of the open questions of dust induced polarization.

Andersson, B.-G.↗

DYNAMICS OF A SPHERICAL ACCRETION SHOCK WITH NEUTRINO HEATING AND ALPHA-PARTICLE RECOMBINATION

We investigate the effects of neutrino heating and alpha-particle recombination on the hydrodynamics of core-collapse supernovae. Our focus is on the nonlinear dynamics of the shock wave that forms in the collapse and the assembly of positive energy material below it. To this end, we perform time-dependent hydrodynamic simulations with FLASH2.5 in spherical and axial symmetry. These generalize our previous calculations by allowing for bulk neutrino heating and for nuclear statistical equilibrium between n, p, and alpha. The heating rate is freely tunable, as is the starting radius of the shock relative to the recombination radius of alpha-particles. An explosion in spherical symmetry involves the excitation of an overstable mode, which may be viewed as the l = 0 version of the 'Standing Accretion Shock Instability'. In two-dimensional simulations, nonspherical deformations of the shock are driven by plumes of material with positive Bernoulli parameter, which are concentrated well outside the zone of strong neutrino heating. The nonspherical modes of the shock reach a large amplitude only when the heating rate is also high enough to excite convection below the shock. The critical heating rate that causes an explosion depends sensitively on the initial position of the shock relative to the recombination radius. Weaker heating is required to drive an explosion in two dimensions than in one, but the difference also depends on the size of the shock. Forcing the infalling heavy nuclei to break up into n and p below the shock only causes a slight increase in the critical heating rate, except when the shock starts out at a large radius. This shows that heating by neutrinos (or some other mechanism) must play a significant role in pushing the shock far enough out that recombination heating takes over.

79 ASTRONOMY AND ASTROPHYSICS↗

Non-stochastic matrix Schrödinger equation for open systems

We propose an extension of the Schrödinger equation for a quantum system interacting with environment. This extension describes dynamics of a collection of auxiliary wavefunctions organized as a matrix m, from which the system density matrix can be reconstructed as ρ{sup ^}=mm{sup †}. We formulate a compatibility condition, which ensures that the reconstructed density satisfies a given quantum master equation for the system density. The resulting non-stochastic evolution equation preserves positive-definiteness of the system density and is applicable to both Markovian and non-Markovian system-bath treatments. Our formalism also resolves a long-standing problem of energy loss in the time-dependent variational principle applied to mixed states of closed systems.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Verification of 2-D Detonation Shock Dynamics in conjunction with Los Alamos Lagrangian hydrocode

As the latest version of the fast-tube Detonation Shock Dynamics (DSD) solver is linked with the Los Alamos Lagrangian hydrocode, verification problems from a 2006 DSD report (LA-14277) have been duplicated with some of the verification criteria changed to more quantitative ones. The observed error convergence is as good as or better than reported in, quite possibly due to the careful treatment of floating point numbers to ensure that their precision level is maintained throughout the code. This report duplicates the three sample verification problems in LA-14277 using the Los Alamos ASC Lagrangian hydrocode (FLAG), official release of 3.2 Alpha6 with a few modifications. This version of FLAG is linked with the latest fast-tube Detonation Shock Dynamics (DSD) version beta 2 solver released in 2011 as part of the LanlDSD software product. New verification criteria are used for the arcwave problem where two specific locations are chosen for burn arrival time comparison. For this report FLAG's internal driver code prepares the distance function ({Psi}) and material ID fields from its hydro setup, instead of the stand-alone driver that is being utilized by the other LANL hydrocodes currently interfaced to LanlDSD. As it is implemented in version 3.2 Alpha6, the {Psi} and material ID fields and other parameters are passed from FLAG to the DSD solver directly, and the burn table is directly passed back to FLAG as part of the calling arguments. The burn-front arrival time 'exact' solutions, mentioned in the sequel for the rate-stick and 'arc-wave' problems, are computed using a pair of special-purpose Fortran codes provided by Aslam. In each case an ansatz for the form of the solution is made in which the radius from the detonator center point is used as the independent space coordinate. This leads to a simplified, problem-specific, 1D form of the governing equation. This equation is solved using 2nd-order spatial differencing and the forward Euler method on a very fine temporal and geometric mesh. The boundary conditions are handled exactly at the correct location, with second order accuracy. Care has been taken to ensure that this solution is fully converged.

36 MATERIALS SCIENCE↗

Enhanced microwave-to-terahertz absorption in graphene

Fresnel equations predict that an ultrathin free standing conductive film, thousands times thinner than skin depth, is capable to absorb up to 50% of incident electromagnetic radiations. In the microwave range, the same holds true for a free standing graphene sheet. We demonstrate theoretically and prove experimentally that microwave absorptance of graphene can be enhanced considerably by depositing graphene on a dielectric substrate. On the experimental side, we obtain 80% and 65% absorptance at 30 GHz and 1 THz, respectively. Theory predicts that higher absorptance can be achieved with a suitable choice of the dielectric permittivity and the thickness of the substrate. Absorption can also be maximized by choosing the optimum incidence angle for s-polarized waves in free space or by working in the vicinity of the cut-off frequency of the transverse electric mode in waveguide configuration. The polarization sensitivity of the transmittance and reflectance of graphene layers can be used to tune the polarization state of the transmitted and reflected radiations.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

TRANSVERSE OSCILLATIONS OF A COOLING CORONAL LOOP

Here we present an investigation into how cooling of the plasma influences the oscillation properties (e.g., eigenfunctions and eigenfrequencies) of transverse (i.e., kink) magnetohydrodynamic (MHD) waves in a compressible magnetic flux tube embedded in a gravitationally stratified and uniformly magnetized atmosphere. The cooling is introduced via a temperature-dependent density profile. A time-dependent governing equation is derived and an approximate zeroth-order solution is then obtained. From this the influence of cooling on the behavior of the eigenfrequencies and eigenfunctions of the transverse MHD waves is determined for representative cooling timescales. It is shown analytically, as the loop cools, how the amplitude of the perturbations is found to decrease as time increases. For cooling timescales of 900-2000 s (as observed in typical EUV loops), it is shown that the cooling has important and relevant influence on the damping times of loop oscillations. Next, the theory is put to the test. The damping due to cooling is fitted to a representative observation of standing kink oscillation of EUV loops. It is also shown with an explicit approximate analytical form, how the period of the fundamental and first harmonic of the kink mode changes with time as the loop cools. A consequence of this is that the value of the period ratio P {sub 1}/P {sub 2}, a tool that is popular in magneto-seismological studies in coronal diagnostics, decreases from the value of a uniform loop, 2, as the temperature decreases. The rate of change in P {sub 1}/P {sub 2} is dependent upon the cooling timescale and is well within the observable range for typical EUV loops. Further to this, the magnitude of the anti-node shift of the eigenfunctions of the first harmonic is shown to continually increase as the loop cools, giving additional impetus to the use of spatial magneto-seismology of the solar atmosphere. Finally, we suggest that measurements of the rate of change in the eigenfunctions and eigenfrequencies of MHD oscillations can provide values for the cooling timescale and a further insight into the physics of coronal loops.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

𝐵 → 𝜌⁢ℓ⁢$\bar{v}$ Resonance Form Factors from 𝐵→ 𝜋⁢𝜋⁢ℓ⁢$\bar{v}$ in Lattice QCD

The decay 𝐵 → 𝜌⁢ℓ⁢$\bar{v}$ is an attractive process for determining the magnitude of the smallest Cabibbo-Kobayashi-Maskawa matrix element, |𝑉 𝑢⁢𝑏 |, and can provide new insights into the origin of the long-standing exclusive-inclusive discrepancy in determinations of this standard-model parameter. This requires a nonperturbative QCD calculation of the 𝐵 → 𝜌 form factors 𝑉, 𝐴 0 , 𝐴 1 , and 𝐴 12 . The unstable nature of the 𝜌 resonance has prevented precise lattice QCD calculations of these form factors to date. Here, we present the first lattice QCD calculation of the 𝐵 → 𝜌 form factors in which the 𝜌 is treated properly as a resonance in 𝑃-wave 𝜋⁢𝜋 scattering. To this end, we use the Lellouch-Lüscher finite-volume formalism to compute the 𝐵 → 𝜋⁢𝜋 form factors as a function of both momentum transfer and 𝜋⁢𝜋 invariant mass, and then analytically continue to the 𝜌 resonance pole. This calculation is performed with 2 + 1 dynamical quark flavors at a pion mass of approximately 320 MeV, and demonstrates a clear path toward results at the physical point.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Nb$_{3}$Sn SRF Photogun High Power Test at Cryogenic Temperatures

Superconducting RF (SRF) photoguns are emerging as promising candidates to produce highly stable electrons for Ultra fast Electron Diffraction/Microscopy (EUD/UEM) applications due to the ultrahigh shot-to-shot stability compared to room temperature RF photoguns. SRF technology was prohibitively expensive for industrial use until two recent advancements: Nb 3 Sn and conduction cooling. SRF gun can provide a CW operation capability while consuming only several Watts of RF power which eliminates the need of an expensive high power RF system and saves a facility footprint. Euclid is developing a continuous wave (CW), 1.5-cell, MeV-scale SRF conduction cooled photogun operating at 1.3 GHz. Here, in this paper, we present first high power results of the gun covered with Nb 3 Sn.

43 PARTICLE ACCELERATORS↗

Equation of State Dependent Dynamics and Multi-messenger Signals from Stellar-mass Black Hole Formation

We investigate axisymmetric black hole (BH) formation and its gravitational wave (GW) and neutrino signals with self-consistent core-collapse supernova simulations of a non-rotating 40 M ⊙ progenitor star using the isotropic diffusion source approximation for the neutrino transport and a modified gravitational potential for general relativistic effects. We consider four different neutron star (NS) equations of state (EoS): LS220, SFHo, BHBΛ$\phi$, and DD2, and study the impact of the EoS on BH formation dynamics and GW emission. We find that the BH formation time is sensitive to the EoS from 460 to >1300 ms and is delayed in multiple dimensions for ~100–250 ms due to the finite entropy effects. Depending on the EoS, our simulations show the possibility that shock revival can occur along with the collapse of the proto-neutron star (PNS) to a BH. The gravitational waveforms contain four major features that are similar to previous studies but show extreme values: (1) a low-frequency signal (~300–500 Hz) from core-bounce and prompt convection, (2) a strong signal from the PNS g-mode oscillation among other features, (3) a high-frequency signal from the PNS inner-core convection, and (4) signals from the standing accretion shock instability and convection. The peak frequency at the onset of BH formation reaches to ~2.3 kHz. Thus, the characteristic amplitude of a 10 kpc object at peak frequency is detectable but close to the noise threshold of the Advanced LIGO and KAGRA, suggesting that the next-generation GW detector will need to improve the sensitivity at the kHz domain to better observe stellar-mass BH formation from core-collapse supernovae or failed supernovae.

79 ASTRONOMY AND ASTROPHYSICS↗

QSHS: an axion dark matter resonant search apparatus

We describe a resonant cavity search apparatus for axion dark matter constructed by the quantum sensors for the hidden sector collaboration. The apparatus is configured to search for QCD axion dark matter, though also has the capability to detect axion-like particles, dark photons, and some other forms of wave-like dark matter. Initially, a tuneable cylindrical oxygen-free copper cavity is read out using a low noise microwave amplifier feeding a heterodyne receiver. The cavity is housed in a dilution refrigerator (DF) and threaded by a solenoidal magnetic field, nominally 8 T. The apparatus also houses a magnetic field shield for housing superconducting electronics, and several other fixed-frequency resonators for use in testing and commissioning various prototype quantum electronic devices sensitive at a range of axion masses in the range 2.0–40 μ eV c -2 . The apparatus as currently configured is intended as a test stand for electronics over the relatively wide frequency band attainable with TM 010 the cavity mode used for axion searches. We present performance data for the resonator, DF, and magnet, and plans for the first science run.

Physics - Physics of elementary particles and fiel↗

Stellar Mass Black Hole Formation and Multimessenger Signals from Three-dimensional Rotating Core-collapse Supernova Simulations

We present self-consistent 3D core-collapse supernova simulations of a 40 ${M}_{\odot }$ progenitor model using the isotropic diffusion source approximation for neutrino transport and an effective general relativistic potential up to `0.9 s postbounce. We consider three different rotational speeds with initial angular velocities of ${{\rm{\Omega }}}_{0}=0$, 0.5, and 1 rad s -1 and investigate the impact of rotation on shock dynamics, black hole (BH) formation, and gravitational wave (GW) signals. The rapidly rotating model undergoes an early explosion at ~250 ms postbounce and shows signs of the low $T/| W| $ instability. We do not find BH formation in this model within ~460 ms postbounce. In contrast, we find BH formation at 776 ms postbounce and 936 ms postbounce for the nonrotating and slowly rotating models, respectively. The slowly rotating model explodes at ~650 ms postbounce, and the subsequent fallback accretion onto the proto–neutron star (PNS) results in BH formation. In addition, the standing accretion shock instability induces rotation of the PNS in the model that started with a nonrotating progenitor. Assuming conservation of specific angular momentum during BH formation, this corresponds to a BH spin parameter of a = J/M = 0.046. However, if no explosion sets in, all the angular momentum will eventually be accreted by the BH, resulting in a nonspinning BH. The successful explosion of the slowly rotating model drastically slows down the accretion onto the PNS, allowing continued cooling and contraction that results in an extremely high GW frequency (f ~ 3000 Hz) at BH formation, while the nonrotating model generates GW signals similar to our corresponding 2D simulations.

79 ASTRONOMY AND ASTROPHYSICS↗

Quantum-well states in fractured crystals of the heavy-fermion material CeCoIn5

Quantum-well states appear in metallic thin films due to the confinement of the wave function by the film interfaces. Using angle-resolved photoemission spectroscopy, we unexpectedly observe quantum-well states in fractured single crystals of CeCoIn5. We confirm that confinement occurs by showing that these states’ binding energies are photon-energy independent and are well described with a phase accumulation model, commonly applied to quantum-well states in thin films. This indicates that atomically flat thin films can be formed by fracturing hard single crystals. For the two samples studied, our observations are explained by free-standing flakes with thicknesses of 206 and 101 Å. We extend our analysis to extract bulk properties of CeCoIn5. Specifically, we obtain the dispersion of a three-dimensional band near the zone center along in-plane and out-of-plane momenta. We establish part of its Fermi surface, which corresponds to a hole pocket centered at G. We also reveal a change of its dispersion with temperature, a signature that may be caused by the Kondo hybridization.

36 MATERIALS SCIENCE↗

The gasdynamics of compact relativistic jets

The gasdynamics of compact relativistic jets is explored by analyzing a specific idealized flow problem using the method of characteristics. The basic flow pattern of the gas and pressure waves within a jet experiencing a drop in external pressure is calculated, with analytic expressions given for many of the important parameters. Scaling laws which relate the intrinsic properties of the jet to the pressure of the surrounding medium are obtained and discussed. The physical properties of the jet depend critically on the value and abruptness of the decrease in external pressure, as well as on the initial Lorentz factor of the flow. A variety of the flow patterns can result, including jets of oscillating cross section, jets with standing shocks, and broad, nearly hollow beams which can break up into multiple jets. These results are discussed in relation to the observed characteristics of superluminal radio sources in general and the superluminal quasar 4C 39.25 in particular.

Daly, Ruth A.↗

Advanced End-to-end Simulation for On-board Processing (AESOP)

Developers of data compression algorithms typically use their own software together with commercial packages to implement, evaluate and demonstrate their work. While convenient for an individual developer, this approach makes it difficult to build on or use another's work without intimate knowledge of each component. When several people or groups work on different parts of the same problem, the larger view can be lost. What's needed is a simple piece of software to stand in the gap and link together the efforts of different people, enabling them to build on each other's work, and providing a base for engineers and scientists to evaluate the parts as a cohesive whole and make design decisions. AESOP (Advanced End-to-end Simulation for On-board Processing) attempts to meet this need by providing a graphical interface to a developer-selected set of algorithms, interfacing with compiled code and standalone programs, as well as procedures written in the IDL and PV-Wave command languages. As a proof of concept, AESOP is outfitted with several data compression algorithms integrating previous work on different processors (AT&T DSP32C, TI TMS320C30, SPARC). The user can specify at run-time the processor on which individual parts of the compression should run. Compressed data is then fed through simulated transmission and uncompression to evaluate the effects of compression parameters, noise and error correction algorithms. The following sections describe AESOP in detail. Section 2 describes fundamental goals for usability. Section 3 describes the implementation. Sections 4 through 5 describe how to add new functionality to the system and present the existing data compression algorithms. Sections 6 and 7 discuss portability and future work.

Mazer, Alan S.↗

Creating an EPICS Based Test Stand Development System for a BPM Digitizer of the Linac Coherent Light Source

The Linac Coherent Light Source (LCLS) is required to deliver a high quality electron beam for producing coherent X-rays. As a result, high resolution beam position monitoring is required. The Beam Position Monitor (BPM) digitizer acquires analog signals from the beam line and digitizes them to obtain beam position data. Although Matlab is currently being used to test the BPM digitizer?s functions and capability, the Controls Department at SLAC prefers to use Experimental Physics and Industrial Control Systems (EPICS). This paper discusses the transition of providing similar as well as enhanced functionalities, than those offered by Matlab, to test the digitizer. Altogether, the improved test stand development system can perform mathematical and statistical calculations with the waveform signals acquired from the digitizer and compute the fast Fourier transform (FFT) of the signals. Finally, logging of meaningful data into files has been added.

43 PARTICLE ACCELERATORS↗