Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “SHIFT PROCESSES”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,333 records · Page 74
All sourcesNASA NTRSDOE OSTI
DOE OSTI2016

An online replanning method using warm start optimization and aperture morphing for flattening-filter-free beams

Purpose: In a situation where a couch shift for patient positioning is not preferred or prohibited (e.g., MR-linac), segment aperture morphing (SAM) can address target dislocation and deformation. For IMRT/VMAT with flattening-filter-free (FFF) beams, however, SAM method would lead to an adverse translational dose effect due to the beam unflattening. Here the authors propose a new two-step process to address both the translational effect of FFF beams and the target deformation. Methods: The replanning method consists of an offline and an online step. The offline step is to create a series of preshifted-plans (PSPs) obtained by a so-called “warm start” optimization (starting optimization from the original plan, rather than from scratch) at a series of isocenter shifts. The PSPs all have the same number of segments with very similar shapes, since the warm start optimization only adjusts the MLC positions instead of regenerating them. In the online step, a new plan is obtained by picking the closest PSP or linearly interpolating the MLC positions and the monitor units of the closest PSPs for the shift determined from the image of the day. This two-step process is completely automated and almost instantaneous (no optimization or dose calculation needed). The previously developed SAM algorithm is then applied for daily deformation. The authors tested the method on sample prostate and pancreas cases. Results: The two-step interpolation method can account for the adverse dose effects from FFF beams, while SAM corrects for the target deformation. Plan interpolation method is effective in diminishing the unflat beam effect and may allow reducing the required number of PSPs. The whole process takes the same time as the previously reported SAM process (5–10 min). Conclusions: The new two-step method plus SAM can address both the translation effects of FFF beams and target deformation, and can be executed in full automation except the delineation of target contour required by the SAM process.

60 APPLIED LIFE SCIENCES↗
DOE OSTI2026

Advanced Manufacturing of Cathode Materials for Lithium-ion Batteries

Original objectives (per the Statement of Project Objectives) centered on developing and translating a continuous pilot process for cathode materials production while targeting (i) a 29% manufacturing cost reduction, (ii) an 82% energy consumption reduction for cathode production, and (iii) a doubling of manufacturing productivity. Planned validation included characterization at appropriate analytical facilities and electrochemical performance evaluation progressing from half-cells to pouch-cell formats, with a pathway to kilogram-scale production of finished cathode materials for representative testing. Scope evolution: During execution, the project team identified that the surfactant-enabled chemistry offered high selectivity for lithium precipitation from brine sources. A formal scope revision shifted the final project year from cathode manufacturing development to direct lithium extraction/lithium recovery, while maintaining the overarching intent of cost reduction and process simplification relevant to the battery supply chain.

25 ENERGY STORAGE↗
NASA NTRS1983

Advanced coal gasifier-fuel cell power plant systems design

Two advanced, high efficiency coal-fired power plants were designed, one utilizing a phosphoric acid fuel cell and one utilizing a molten carbonate fuel cell. Both incorporate a TRW Catalytic Hydrogen Process gasifier and regenerator. Both plants operate without an oxygen plant and without requiring water feed; they, instead, require makeup dolomite. Neither plant requires a shift converter; neither plant has heat exchangers operating above 1250 F. Both plants have attractive efficiencies and costs. While the molten carbonate version has a higher (52%) efficiency than the phosphoric acid version (48%), it also has a higher ($0.078/kWh versus $0.072/kWh) ten-year levelized cost of electricity. The phosphoric acid fuel cell power plant is probably feasible to build in the near term: questions about the TRW process need to be answered experimentally, such as weather it can operate on caking coals, and how effective the catalyzed carbon-dioxide acceptor will be at pilot scale, both in removing carbon dioxide and in removing sulfur from the gasifier.

Heller, M. E.↗
DOE OSTI2011

SUCCESSIVE MERGER OF MULTIPLE MASSIVE BLACK HOLES IN A PRIMORDIAL GALAXY

Using highly accurate N-body simulations, we explore the evolution of multiple massive black holes (hereafter MBHs) in a primordial galaxy that is composed of stars and MBHs. The evolution is pursed with a fourth-order Hermite scheme, where not only three-body interaction of MBHs but also dynamical friction by stars are incorporated. Initially, 10 MBHs with equal masses of 10{sup 7} M{sub sun} are set in a host galaxy with 10{sup 11} M{sub sun}. It is found that 4-6 MBHs merge successively within 1 Gyr, emitting gravitational wave radiation. The key process for the successive merger of MBHs is the dynamical friction by field stars, which enhances three-body interactions of MBHs when they enter the central regions of the galaxy. The heaviest MBH always composes a close binary at the galactic center, which shrinks owing to the angular momentum transfer by the third MBH and eventually merges. The angular momentum transfer by the third MBH is due to the sling-shot mechanism. We find that the secular Kozai mechanism does not work for a binary to merge if we include the relativistic pericenter shift. The simulations show that a multiple MBH system can produce a heavier MBH at the galactic center purely through N-body process. This merger path can be of great significance for the growth of MBHs in a primordial galaxy. The merger of multiple MBHs may be a potential source of gravitational waves for the Laser Interferometer Space Antenna and pulsar timing.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2011

Introduction to structure from motion and its applications in remote sensing

This talk discusses my experience at Los Alamos National Laboratories developing the Wide Area Persistent Surveillance (WAPS) system AngelFire and the problems with working with low resolution surface models. This experience provided a motivation to seek solutions to utilize the redundant WAPS imagery to build surface models of the urban environment. Structure from Motion (SfM) is a process that takes multiple view imagery and compute the 3D structure of a scene. We will walk through the basic algorithm and discuss areas for optimization. Military services and intelligence agencies face long-standing challenges with processing, exploiting, and disseminating ISR data. The problem is that too much data is being produced and not enough people to look at it and the problem is not going away. As a result of this data overload, we need to shift the way we think about data and find creative ways to use and present it so it can be easily digested by decision makers. SfM also provides a means for developing a data processing and organization architecture. Applications for various remote sensing applications will be discussed for motivation for why SfM and Multi-View Stereo rendering is an important area that needs to be continued to be developed.

47 OTHER INSTRUMENTATION↗
DOE OSTI2011

Optical Response of Nanostructured Ag/Au And Au/Ag Bilayer Thin Films Deposited by Ion Beam Sputtering

Bilayer metal thin films of total thickness 15 to 20 nm, were deposited by ion beam sputtering at very low ion energy (150 eV-250 eV). The thickness of bottom metal layer was kept constant whereas the thickness of top metal layer were varied in both, Ag/Au and Au/Ag bilayer, cases. There is a red shift in the position of the SPR peak due to the presence of the top metal layer. In the case of Au/Ag the presence of Au causes a shift from 444 nm to 628 nm while in the case of Ag/Au the shift is from 564 to 686 nm due to the presence of the Ag layer on Au. The tunability of plasmon resonances is attributed to the process of plasmon hybridization.

36 MATERIALS SCIENCE↗
DOE OSTI2022

1 H chemical shift anisotropy: a high sensitivity solid-state NMR dynamics probe for surface studies?

We report dynamics play significant roles in chemistry and biochemistry-molecular motions impact both large- and small-scale chemical reactions in addition to biochemical processes. In many systems, including heterogeneous catalysts, the characterization of dynamics remains a challenge. The most common approaches involve the solid-state NMR measurement of anisotropic interactions, in particular 2 H quadrupolar coupling and 1 H–X dipolar coupling, which generally require isotope enrichment. Due to the high sensitivity of 1 H NMR, 1 H chemical shift anisotropy (CSA) is a particularly enticing, and underexplored, dynamics probe. We carried out 1 H CSA and 1 H– 13 C dipolar coupling measurements in a series of model supported complexes to understand how 1 H CSA can be leveraged to gain dynamic information for heterogeneous catalysts. Mathematical descriptions are given for the dynamic averaging of the CSA tensor, and its dependence on orientation and asymmetry. The variability of the orientation of the tensor in the molecular frame, in addition to its magnitude and asymmetry, negatively impacts attempts to extract quantitative dynamic information. Nevertheless, 1 H CSA measurements can reveal useful qualitative insights into the motions of a particularly dilute site, such as from a surface species.

1H chemical shift anisotropy↗
DOE OSTI2011

Medium Modifications of Hadron Properties and Partonic Processes

Chiral symmetry is one of the most fundamental symmetries in QCD. It is closely connected to hadron properties in the nuclear medium via the reduction of the quark condensate , manifesting the partial restoration of chiral symmetry. To better understand this important issue, a number of Jefferson Lab experiments over the past decade have focused on understanding properties of mesons and nucleons in the nuclear medium, often benefiting from the high polarization and luminosity of the CEBAF accelerator. In particular, a novel, accurate, polarization transfer measurement technique revealed for the first time a strong indication that the bound proton electromagnetic form factors in 4He may be modified compared to those in the vacuum. Second, the photoproduction of vector mesons on various nuclei has been measured via their decay to e+e- to study possible in-medium effects on the properties of the rho meson. In this experiment, no significant mass shift and some broadening consistent with expected collisional broadening for the rho meson has been observed, providing tight constraints on model calculations. Finally, processes involving in-medium parton propagation have been studied. The medium modifications of the quark fragmentation functions have been extracted with much higher statistical accuracy than previously possible.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2019

Two-Magnon Relaxation Processes in Nanocrystalline Thin Magnetic Films

Numerical analysis of the micromagnetic model was used to reveal the ‘resonance’ feature of relaxation processes in nanocrystalline thin magnetic films. This feature manifests itself in the form of sharp broadening of the ferromagnetic resonance (FMR) line at a certain frequency f{sub 1} depending on magnetic characteristics of the film, and is observed only in films the thickness of which exceeds some threshold value d{sub min}. Sharp broadening of the FMR line is accompanied by significant shift of the resonance field, whereas the shift value changes the sign at frequency ~ f{sub 1}. It was shown analytically that the nature of observed effects is associated with the two-magnon process of spin waves scattering on quasi-periodic magnetic microstructure – magnetization ‘ripple’. Obtained expressions for the threshold value of film thickness d{sub min} and frequency of maximum broadening of FMR line f{sub 1} agree well with the results of numerical computation of micromagnetic model.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2016

Impact of charge carrier injection on single-chain photophysics of conjugated polymers

Charges in conjugated polymer materials have a strong impact on the photophysics and their interaction with the primary excited state species has to be taken into account in understanding device properties. Here, we employ single-molecule spectroscopy to unravel the influence of charges on several photoluminescence (PL) observables. The charges are injected either stochastically by a photochemical process or deterministically in a hole-injection sandwich device configuration. We find that upon charge injection, besides a blue-shift of the PL emission and a shortening of the PL lifetime due to quenching and blocking of the lowest-energy chromophores, the non-classical photon arrival time distribution of the multichromophoric chain is modified towards a more classical distribution. Surprisingly, the fidelity of photon antibunching deteriorates upon charging, whereas one would actually expect the opposite: the number of chromophores to be reduced. A qualitative model is presented to explain the observed PL changes. The results are of interest to developing a microscopic understanding of the intrinsic charge-exciton quenching interaction in devices.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2025

UO2 microstructural evolutions induced by Ni, Mo, and W dopants for intentional forensics

The concept of tagging nuclear fuel with a chemical barcode to enable forensics analysis across the nuclear fuel cycle is an area of active investigation, particularly to ensure fabrication viability without disrupting current fuel performance. This study explored the feasibility of using Ni, Mo, and W isotopic double-spikes as dopants in UO2 fuel from the perspective of fuel fabrication. Doped UO2 pellets were produced using conventional fuel fabrication processes, including powder mixing, sieving, pressing, and sintering in a reductive atmosphere. Two composition levels, 100 and 1000 ppm, were evaluated for each dopant element with isotopic double-spike configurations. For the Ni system, additional dopant concentrations of 250 and 500 ppm were produced with nonperturbed isotopic ratios. The results demonstrated that successful incorporation of Ni, Mo, and W double-spikes into UO2 pellets occurred with minimal shift in final density or dopant loss during pellet fabrication. Isotopic analysis confirmed the presence of the double-spike signature even when diluted with natural isotopic material in ratio of 1:5 in the fabrication process. Microstructural examinations revealed different impacts on grain size compared with undoped UO2. This study showed that Ni incorporation up to ∼500 ppm promoted moderate grain growth, whereas the Mo and W systems caused grain size reduction at all concentrations. Changes in the UO2 lattice parameter as a function of composition were detected exclusively for Ni up to 500 ppm, indicating that the Ni solid solution was the main factor for the observed grain growth. Insoluble (Mo and W) or supersaturated (Ni > 500 ppm) conditions produced grain size reduction. The Ni-doped pellets in the solution range resulted in a final microstructure within fuel specifications, demonstrating its potential benefits of employing complex dopant systems for potential nuclear forensic applications.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Kinetic and Mechanistic Understanding of Boron-Containing Catalysts for the Production of Light Olefins through Selective Oxidation

In recent years, an abundance of natural gas obtained from shale deposits has created opportunities for the US chemical industry to establish new and more efficient processes for the production of chemical intermediates and polymers. For example, the replacement of petroleum-derived naphtha as a to shale-derived ethane as feedstocks has made the production of ethylene/polyethylene less costly. However, this shift in feedstock has led to lower production of propylene from steam crackers, and new “on-purpose” light olefin production technologies have been implemented to bridge the gap between propylene supply and demand. The most important of these processes is direct propane dehydrogenation (PDH), but catalyst deactivation and high temperatures lead to high capital and operating costs. Oxidative dehydrogenation of propane (ODHP) is an efficient alternative to PDH, but high selectivity to CO2 from previous metal oxide catalyst prevents implementation. Hexagonal boron nitride (hBN) and other boron-containing materials have been recently developed as highly selective catalysts for both ODHP and oxidative cracking, surpassing previous systems. Much is still unknown in regard to the mechanism and the dynamic surface changes that occur under reaction conditions. This research project aims to combine in situ/operando spectroscopic investigation and kinetic studies to elucidate the interplay between the proposed gas-phase mechanism and the surface structures on the working catalyst. These insights will be leveraged to create a framework for optimizing reaction conditions and material synthesis for the next generation of boron-containing selective oxidation catalysts.

02 PETROLEUM↗
DOE OSTI2012

SiN{sub x}-induced intermixing in AlInGaAs/InP quantum well through interdiffusion of group III atoms

We analyze the composition profiles within intermixed and non-intermixed AlInGaAs-based multiple quantum wells structures by secondary ion mass spectrometry and observe that the band gap blue shift is mainly attributed to the interdiffusion of In and Ga atoms between the quantum wells and the barriers. Based on these results, several AlInGaAs-based single quantum well (SQW) structures with various compressive strain (CS) levels were grown and their photoluminescence spectra were investigated after the intermixing process involving the encapsulation of thin SiN{sub x} dielectric films on the surface followed by rapid thermal annealing. In addition to the annealing temperature, we report that the band gap shift can be also enhanced by increasing the CS level in the SQW. For instance, at an annealing temperature of 850 Degree-Sign C, the photoluminescence blue shift is found to reach more than 110 nm for the sample with 1.2%-CS SQW, but only 35 nm with 0.4%-CS SQW. We expect that this relatively larger atomic compositional gradient of In (and Ga) between the compressively strained quantum well and the barrier can facilitate the atomic interdiffusion and it thus leads to the larger band gap shift.

77 NANOSCIENCE AND NANOTECHNOLOGY↗
NASA NTRS1985

Automated Extraction of Absorption Bands from Reflectance Special

A multiple high order derivative spectroscopy technique has been developed for deriving wavelength positions, half widths, and heights of absorption bands in reflectance spectra. The technique is applicable to laboratory spectra as well as medium resolution (100-200/cm) telescope or spacecraft spectra with moderate (few percent) noise. The technique permits absorption band positions to be detected with an accuracy of better than 3%, and often better than 1%. The high complexity of radiative transfer processes in diffusely reflected spectra can complicate the determination of absorption band positions. Continuum reflections, random illumination geometries within the material, phase angle effects, composite overlapping bands, and calibration uncertainties can shift apparent band positions by 20% from their actual positions or mask them beyond detection. Using multiple high order derivative analysis, effects of scattering continua, phase angle, and calibration (smooth features) are suppressed. Inflection points that characterize the positions and half widths of constituent bands are enhanced by the process and directly detected with relatively high sensitivity.

Huguenin, R. L.↗
DOE OSTI2017

Exploring the effects of a nonhydrostatic dynamical core in high-resolution aquaplanet simulations

This study explores the impact of a nonhydrostatic dynamical core in high-resolution regional climate simulations using an aquaplanet framework. The Weather Research and Forecasting (WRF) model is used to conduct simulations with both hydrostatic (H) and nonhydrostatic (NH) solvers at horizontal grid spacings (?x) of 36, 12, and 4 km. The differences between the H and NH simulated precipitation (?P) are notable even at ?x = 12 km in the inter-tropical convergence zone and the transition region to the drier subtropics. At gray-zone grid spacing (12 km and 4 km) over the tropics, ?P is sensitive to whether a cumulus parameterization scheme is used or not. With an idealized Witch of Agnesi land mountain, differences in the precipitation and circulation (vertical velocity) between the H and NH simulations are significant even at ?x = 36 km in the tropics due largely to the strong feedbacks related to moist processes. The differences increase as the model grid spacing and mountain half width (a) are reduced, accompanied by a shift towards a more nonhydrostatic flow regime at a = 24 km. Latent heat release drastically enhances the differences between the NH and H simulations and extends the effect of nonhydrostatic dynamics to a broader region over the mountain and downstream over the tropics. Overall, differences exist between H and NH simulations even at resolutions between 12 and 36 km, but the differences are sensitive to the representations of moist physics and other features such as horizontal diffusion used in the WRF model.

nonhydrostatic dynamics, latent heating, nonhydros↗
DOE OSTI2020

Past and present disturbances generate spatial variation in seed predation

Seed survival is a key process for plant populations; variation in the activity and abundance of animals that consume seeds can lead to dramatic shifts in seed fate. Because granivores may respond to contemporary disturbance as well as to enduring changes in habitats caused by past disturbances, understanding seed fate requires studies capable of evaluating how past and present disturbances modify granivore communities, foraging activity, and ultimately, seed predation. Historic agricultural land use and contemporary canopy harvesting are widespread disturbances that could generate large-scale patterns of seed fate by modifying environmental characteristics that determine granivore identity and behavior. Here, to evaluate whether land-use history and canopy harvesting affect seed–animal interactions, we conducted an experiment distributed across 80,000 ha of longleaf pine woodlands that coupled large-scale canopy harvesting at seven 4-ha sites containing both post-agricultural land use and nonagricultural land use in South Carolina, United States. We deployed a total of 28,000 nail-tagged seeds and recovered the tags to quantify seed fate. Past agricultural land use and contemporary canopy harvesting interacted to affect the rate of seed predation. Seed predation rates in harvested sites depended on land-use history: Seed predation was 30% lower in post-agricultural plots than in nonagricultural plots. This interaction was driven by the differential effect of land-use history and canopy harvesting on rodent activity. Camera traps revealed that Sigmodon hispidus only foraged in harvested plots and was most active in nonagricultural plots. In harvested plots, seed removal increased with S. hispidus activity. In unharvested plots, seed removal increased with Sciurus niger activity, but S. niger was not affected by land-use history. In finding that land-use history and canopy harvesting determine the outcomes of seed–animal interactions, we show that understanding patterns of seed predation is contingent upon the interplay of disturbances in both the distant past and recent past. These results suggest that patterns of past land use and present land use may help reconcile the considerable variation in seed fate observed in ecological communities.

60 APPLIED LIFE SCIENCES↗
DOE OSTI2022

Electroluminescence from Single-Walled Carbon Nanotubes with Quantum Defects

Individual single-walled carbon nanotubes with covalent sidewall defects have emerged as a class of photon sources whose photoluminescence spectra can be tailored by the carbon nanotube chirality and the attached functional group/molecule. Here we present electroluminescence spectroscopy data from single-tube devices based on (7, 5) carbon nanotubes, functionalized with dichlorobenzene molecules, and wired to graphene electrodes. We observe electrically generated, defect-induced emissions that are controllable by electrostatic gating and strongly red-shifted compared to emissions from pristine nanotubes. The defect-induced emissions are assigned to excitonic and trionic recombination processes by correlating electroluminescence excitation maps with electrical transport and photoluminescence data. At cryogenic conditions, additional gate-dependent emission lines appear, which are assigned to phonon-assisted hot-exciton electroluminescence from quasi-levels. Similar results were obtained with functionalized (6, 5) nanotubes. We also compare functionalized (7, 5) electroluminescence data with photoluminescence of pristine and functionalized (7, 5) nanotubes redox-doped using gold(III) chloride solution. This work shows that electroluminescence excitation is selective toward neutral defect-state configurations with the lowest transition energy, which in combination with gate-control over neutral versus charged defect-state emission leads to high spectral purity.

36 MATERIALS SCIENCE↗
DOE OSTI2016

Large Transient Optical Modulation of Epsilon-Near-Zero Colloidal Nanocrystals

Here, epsilon-near-zero materials may be synthesized as colloidal nanocrystals which display large magnitude subpicosecond switching of infrared localized surface plasmon resonances. Such nanocrystals offer a solution-processable, scalable source of tunable metamaterials compatible with arbitrary substrates. Under intraband excitation, these nanocrystals display a red-shift of the plasmon feature arising from the low electron heat capacities and conduction band nonparabolicity of the oxide. Under interband pumping, they show in an ultrafast blueshift of the plasmon resonance due to transient increases in the carrier density. Combined with their high-quality factor, large changes in relative transmittance (+86%) and index of refraction (+85%) at modest control fluences (<5 mJ/cm 2 ) suggest that these materials offer great promise for all-optical switching, wavefront engineering, and beam steering operating at terahertz switching frequencies.

77 NANOSCIENCE AND NANOTECHNOLOGY↗