Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “SEPARATION PROCESSES”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,333 records · Page 74

Magnetite Nanoparticles Coated with Rifampicin and Chlortetracycline for Drug Delivery Applications

Four types of biocompatible magnetic fluids based on superparamagnetic nanoparticles with Fe{sub 3}O{sub 4} cores were functionalized with antibiotics (rifampicin or chlortetracycline) as potential candidates for in vivo biomedical applications, such as magnetically controlled drug delivery. The synthesis consisted in coprecipitation of iron oxide in basic, as well as in acid medium, followed by the dispersion of the resulted magnetite nanoparticles in aqueous solution containing the antibiotic. The chosen method to prepare the magnetite-core/drug-shell systems avoided intermediate organic coating of the magnetic nanoparticles. Comparative analysis of the rheological features of the aqueous magnetic fluid samples was performed. The structural features of the coated magnetic particles were investigated by X-Ray Diffraction (XRD), Transmission Electron Microscopy (TEM) and Vibrating Sample Magnetometry (VSM). Good crystallinity and adequate stability in time were evidenced. Drug delivery curves were spectrophotometrically provided.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Synthesis And Luminescence Studies Of Mn doped CaF{sub 2}

Nano particles of CaF{sub 2}:Mn were synthesized by a co-precipitation method. The maximum Mn concentration which could be doped into the CaF{sub 2} lattice was {approx}3%. The photoluminescence and thermally stimulated luminescence (TSL) were studied for different Mn doping. High dopant concentration leads to the appearance of yellow orange luminescence (580 nm) band due to the introduction of excitation levels in the deep UV region. A slight decrease in TSL peak temperature was observed at higher Mn concentrations after attaining a maximum at 1.3% Mn. Based on TSL data optimum doping concentration was found to be 2.5%. These nanoparticles were further hot pressed in vacuum to produce optically transparent ceramic.

36 MATERIALS SCIENCE↗

A measurement setup for acquiring the local magnetic properties of plastically deformed soft magnetic materials

This paper introduces a new measurement setup for extraction of the local magnetic properties. With the help of finite element method simulations, modifications are made on the previous double-C-yoke method. Small dimension measuring coils are applied in the stray field produced by the magnetic circuit to evaluate the local magnetic properties of the specified part of the specimen. Through the measurements with the plastically deformed materials at different temperatures, it indicates that the magnetic properties of soft magnetic materials are quite sensitive to plastic straining. After high-temperature thermal treatment on the plastically deformed specimen, the local magnetic properties exhibit an obvious recovery.

36 MATERIALS SCIENCE↗

Heavy-meson decay constants from QCD sum rules

We sketch a recent sum-rule extraction of the decay constants of the heavy pseudoscalar mesons D, D{sub s}, B, and B{sub s} from the two-point correlator of heavy-light pseudoscalar currents. Our main emphasis lies on the control over all the uncertainties in the decay constants, related both to the input QCD parameters and to the limited accuracy of the method of sum rules. Gaining this control has become possible by application of our new procedure of extracting hadron observables based on a dual threshold depending on the Borel parameter. For the charmed-meson decay constants, we find fD = (206.2{+-}7.3{sub (OPE)}{+-}5.1{sub (syst)}) MeV, fD{sub s} = (245.3{+-}15.7{sub (OPE)}{+-}4.5{sub (syst)}) MeV. For the beauty mesons, the decay constants turn out to be extremely sensitive to the precise value of the {ovr MS} mass of the b-quark, {bar m}{sub b}({bar m}{sub b}). By requiring our sum-rule estimate to match the average of the lattice determinations of f{sub B}, we extract the rather accurate value {bar m}{sub b}({bar m}{sub b}) = (4.245{+-}0.025) GeV. Feeding this parameter value into our sum-rule formalism leads to the beauty-meson decay constants fB = (193.4{+-}12.3{sub (OPE)}{+-}4.3{sub (syst)}) MeV, fB{sub s} = (232.5{+-}18.6{sub (OPE)}{+-}2.4{sub (syst)}) MeV.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

The Concentration Of Tritium In Urine And Internal Radiation Dose Estimation Of PTNBR Radiation Workers

The operation of Triga 2000 reactor in Nuclear Technology Center for Materials and Radiometry (PTNBR BATAN) normally produce tritium radionuclide which is the activation product of deuterium atom in reactor primary cooling water. According to previous monitoring, tritium was detected with the concentration of 8.236{+-}0.677 kBq/L and 1.704{+-}0.046 Bq/L in the primary cooling water and in reactor hall air, respectively. The tritium in reactor hall air chronically can be inhaled by the workers. In this research, tritium content in radiation workers' urine was determined to estimate the internal radiation doses received by the workers. About 50-100 mL of urine samples were collected from 48 PTNBR workers that is classified as 24 radiation workers and 24 administration staffs as a control. Urine samples of 25 mL were then prepared by active charcoal and KMnO{sub 4} addition and followed with complete distillation. The 2 mL of distillate was added with 13 mL scintillator, shaked vigorously and remained in cool and dark condition for about 24 hours. The tritium in the samples was then measured using liquid scintillation counter (LSC) for 1 hour. From the measurement results it was obtained that the tritium concentration in the urine of radiation workers were in the range of not detected and 5.191 Bq/mL, whereas in the administration staffs the concentration were between not detected and 4.607 Bq/mL. Internally radiation doses were calculated using the tritium concentration data, and it was found the averages about 0.602 {mu}Sv/year and 0.532 {mu}Sv/year for radiation workers and administration staffs, respectively. The doses received by the workers were lower than that of the permissible doses from tritium, i.e. 40 {mu}Sv/year.

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

Analysis techniques for the {Lambda}(1405) in p+p reactions

We present an analysis of the {Lambda}(1405){yields}{Sigma}{sup {+-}}{pi}{sup {+-}} decay in p+p reactions at 3.5 GeV kinetic beam energy. The data were taken with the High Acceptance Di-Electron Spectrometer (HADES). The extraction of the {Lambda}(1405) signal was achieved by an effective background suppression combined with a quantitatively precise determination and identification of the remaining background sources. The different techniques, used for this analysis, are presented in this work.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Erosion of Extraction Electrodes of Ion Sources due to Sputtering

The effects upon erosion due to implanted atoms in extraction electrodes of an ion source have been investigated through calculating the sputtering yields with a Monte Carlo simulation code, ACAT. The results obtained with ACAT have indicated that the sputtering yields of extraction electrodes are substantially affected by the retention of implanted atoms depending upon the mass ratio of electrode materials and extracted ions from the source plasma. The enhanced erosion takes place as the heavier ion beam species like phosphor is implanted into lighter electrode material like carbon. Additional mixing of materials arising from ion source operation, such as hot cathode materials evaporation onto a carbon extraction electrode, can shorten the lifetime of the extraction electrodes.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Development of a Compact Ion Source with a Hot Hollow Cathode

A compact ion source with 14 mm diameter, 30 mm long discharge region was developed. A total size of the ion source including the beam extraction system was 60 mm in diameter and 160 mm in length. A high temperature coaxial cathode consisting of thin-wall tantalum and tungsten tubes produced a discharge plasma. A source gas was supplied through the inner W tube of the coaxial cathode. A stable plasma of H{sub 2} was maintained with the discharge current of 2.0 A at 68 A cathode heating current. The optimum H{sub 2} gas pressure for ion beam extraction was 2x10{sup -2} Pa. Hydrogen ion beam current was 120 {mu}A (1 mA/cm{sup 2}) at 2.0 A discharge current and 3.0 kV extraction voltage.

43 PARTICLE ACCELERATORS↗

The effect of He plasma treatment on properties of organosilicate glass low-k films

The effect of low-pressure He plasma on properties of nanoporous organosilicate glasses low-k films with 24% and 33% open porosity is studied. The influence of ions, VUV radiation, and metastable atoms are extracted separately using a special experimental system designed for this purpose. The low-k films treated in He plasma were exposed to O or H atoms in the downstream of high-pressure O{sub 2} or H{sub 2} rf discharge. The changes in chemical composition and structure occurring in low-k films were measured before and after all treatments. The loss probabilities of oxygen and hydrogen atoms on the low-k film surface were measured for both treated and pristine films. It is shown that the film pretreatment in He plasma leads to the noticeable densification of the top surface layer up to complete sealing all the films studied. The sealing layer prevents O atoms from deep penetration to the film bulk and carbon extraction. The sealing mechanism related to the joint impact of low-energy ions and VUV photons with metastable atoms in He plasma is discussed in detail.

36 MATERIALS SCIENCE↗

Perpendicular ferrimagnetism in strained Mn{sub 2}As film

Ferrimagnetic Mn{sub 2}As thin films with perpendicular magnetic anisotropy were successfully grown on Si(100) by molecular-beam epitaxy. From the reflection high-energy electron diffraction and X-ray diffraction patterns, the orientation of the Mn{sub 2}As film on Si was along the c-axis in the tetragonal crystal structure. Mn{sub 2}As film exhibited ferrimagnetic ordering at temperatures greater than 300 K, which differs from antiferromagnetic or paramagnetic behaviors in the bulk form. The magnetic moment of Mn{sub 2}As determined by saturated magnetization was 0.51 {mu}{sub B} per unit cell.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Bio-composite Nonwoven Media Based on Chitosan and Empty Fruit Bunches for Wastewater Application

Fibrous filter media in the form of non-woven filters have been used extensively in water treatment as pre-filters or to support the medium that does the separation. Lignocellulosic such as empty fruit bunches have potential to be used as a low cost filter media as they represent unused resources, widely available and are environmentally friendly. Laboratory filtration tests were performed to investigate the potential application of empty fruit bunches that enriched with chitosan as a fiber filter media to remove suspended solids, oil and grease, and organics in terms of chemical oxygen demand from palm oil mill effluent. The present paper studies the effect of chitosan concentration on the filter media performance. Bench-scaled experiment results indicated that pre-treatment using the fiber filtration system removed up to 67.3% of total suspended solid, 65.1% of oil and grease and 46.1% of chemical oxygen demand. The results show that the lignocellulosic fiber filter could be a potential technology for primary wastewater treatment.

36 MATERIALS SCIENCE↗

Chemical response of lithiated graphite with deuterium irradiation

Lithium wall conditioning has been found to enhance plasma performance for graphite walled fusion devices such as TFTR, CDX-U, T-11M, TJ-II and NSTX. Among observed plasma enhancements is a reduction in edge density and reduced deuterium recycling. The mechanism by which lithiated graphite retains deuterium is largely unknown. Under controlled laboratory conditions, X-ray photoelectron spectroscopy (XPS) is used to observe the chemical changes that occur on ATJ graphite after lithium deposition. The chemical state of lithiated graphite is found to change upon deuterium irradiation indicating the formation Li-O-D, manifest at 532.9 {+-} 0.6 eV. Lithium-deuterium interactions are also manifest in the C 1s photoelectron energy range and show Li-C-D interactions at 291.2 {+-} 0.6 eV. Post-mortem NSTX tiles that have been exposed to air upon extraction are cleaned and examined, revealing the chemical archaeology that formed during NSTX operations. XPS spectra show strong correlation ({+-} 0.3 eV) in Li-O-D and Li-O peaks from post-mortem and control experiments, thus validating offline experiments. We report findings that show that deuterium is found to interact with lithium after lithium has already reacted with carbon and oxygen.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Surface segregation effects of erbium in GaAs growth and their implications for optical devices containing ErAs nanostructures

We report on the integration of semimetallic ErAs nanoparticles with high optical quality GaAs-based semiconductors, grown by molecular beam epitaxy. Secondary ion mass spectrometry and photoluminescence measurements provide evidence of surface segregation and incorporation of erbium into layers grown with the erbium cell hot, despite the closed erbium source shutter. We establish the existence of a critical areal density of the surface erbium layer, below which the formation of ErAs precipitates is suppressed. Based upon these findings, we demonstrate a method for overgrowing ErAs nanoparticles with III-V layers of high optical quality, using subsurface ErAs nanoparticles as a sink to deplete the surface erbium concentration. This approach provides a path toward realizing optical devices based on plasmonic effects in an epitaxially-compatible semimetal/semiconductor system.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Wave-particle interactions in rotating mirrors

Wave-particle interactions in ExB rotating plasmas feature an unusual effect: particles are diffused by waves in both potential energy and kinetic energy. This wave-particle interaction generalizes the alpha channeling effect, in which radio frequency waves are used to remove alpha particles collisionlessly at low energy. In rotating plasmas, the alpha particles may be removed at low energy through the loss cone, and the energy lost may be transferred to the radial electric field. This eliminates the need for electrodes in the mirror throat, which have presented serious technical issues in past rotating plasma devices. A particularly simple way to achieve this effect is to use a high azimuthal mode number perturbation on the magnetic field. Rotation can also be sustained by waves in plasmas without a kinetic energy source. This type of wave has been considered for plasma centrifuges used for isotope separation. Energy may also be transferred from the electric field to particles or waves, which may be useful for ion heating and energy generation.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

The ghost propagator in Coulomb gauge

We present results for a numerical study of the ghost propagator in Coulomb gauge whereby lattice results for the spatial gluon propagator are used as input to solving the ghost Dyson-Schwinger equation. We show that in order to solve completely, the ghost equation must be supplemented by a boundary condition (the value of the inverse ghost propagator dressing function at zero momentum) which determines if the solution is critical (zero value for the boundary condition) or subcritical (finite value). The various solutions exhibit a characteristic behavior where all curves follow the same (critical) solution when going from high to low momenta until 'forced' to freeze out in the infrared to the value of the boundary condition. The boundary condition can be interpreted in terms of the Gribov gauge-fixing ambiguity; we also demonstrate that this is not connected to the renormalization. Further, the connection to the temporal gluon propagator and the infrared slavery picture of confinement is discussed.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Heavy-Quark Mass and Heavy-Meson Decay Constants from QCD Sum Rules

We present a sum-rule extraction of decay constants of heavy mesons from the two-point correlator of heavy-light pseudoscalar currents. Our primary concern is to control the uncertainties of the decay constants, induced by both input QCD parameters and limited accuracy of the sum-rule method. Gaining this control is possible by applying our novel procedure for the extraction of hadron observables utilizing Borel-parameter-depending dual thresholds. For the charmed mesons, we obtain f{sub D} (206.2{+-}7.3{sub (OPE){+-}}5.1{sub (syst)}) MeV and f{sub D{sub s}} (245.3{+-}15.7{sub (OPE){+-}}4.5{sub (syst)}) MeV. In the case of the beauty mesons, the decay constants prove to be extremely sensitive to the exact value of the b-quark MS mass m-bar{sub b}(m-bar{sub b}). By matching our sum-rule prediction for f{sub B} to the lattice outcomes, the very accurate b-mass value m-bar{sub b}(m-bar{sub b}) = (4.245{+-}0.025) GeV is found, which yields f{sub B} = (193.4{+-}12.3{sub (OPE){+-}}4.3{sub (syst)}) MeV and f{sub B{sub s}} (232.5{+-}18.6{sub (OPE){+-}}2.4{sub (syst)}) MeV.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

QCD at DOe: A Review of Recent Results

We report a variety of measurements of hadronic final states, ranging from elastic scattering of protons to events with highly energetic jets, based on data taken with the DOe experiment at the Fermilab Tevatron proton-antiproton collider.Starting with the non-perturbative regime, we report measurement of the pp-bar elastic differential scattering cross section, using DOe's Forward Proton Detectors (FPD). We present a new way to describe minimum bias events based on angular distributions in {approx_equal}5 million minimum bias pp-bar collisions collected between April 2002 and February 2006 with the DOe detector. We demonstrate that the distribution of {Delta}{phi} in the detector transverse plane between the leading track and all other tracks is a robust observable that can be used for tuning of multiple color interaction models. Pseudorapidity correlations of the {Delta}{phi} distributions are also studied. In addition, we present a measurement of the effective cross section for events produced by double parton scattering.DOe has produced a wide-variety of analyzes of final states involving jets, using a well-understood and calibrated data sample. Inclusive jet cross-sections, dijet production, and multi-jet production have been studied and compared to next-to-leading order (NLO) perturbative Quantum Chromodynamics (pQCD) predictions. After reviewing several published measurements, including the inclusive jet cross section and extraction of the strong coupleing constant {alpha}{sub s}, and the dijet angular dependence and azimuthal decorrelation, we present several recent analyszes. The differential inclusive dijet as a function of the dijet invariant mass Mjj, and the three-jet cross section as a function of the invariant three-jet mass (M{sub 3jet}), are measured in a data set corresponding to an integrated luminosity of 0.7 fb{sup -1}. NLO pQCD calculations are found to be in a reasonable agreement with the measured cross sections.Based on the same data set, we present the first measurement of ratios of multi-jet cross sections in pp-bar collisions at {radical}(s) = 1.96 TeV at the Fermilab Tevatron Collider. The ratio of inclusive trijet and dijet cross sections, R{sub 3/2}, has been measured as a function of the transverse jet momenta. The data are compared to QCD model predictions in different approximations.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗