Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Robust stability”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,333 records · Page 74
All sourcesNASA NTRSDOE OSTI
NASA NTRS1990

Development of UMARC (University of Maryland Advanced Rotorcraft Code)

The University of Maryland Advanced Rotorcraft Code (UMARC) is a user-friendly, FEM-based comprehensive helicopter rotor simulation code of high numerical robustness and computational efficiency. UMARC formulates the rotor-fuselage equations using Hamilton's principle, and are discretized using finite elements in space and time. The FEM formulation allows the code to analyze a wide variety of rotor designs. Dynamic inflow modeling is used for unsteady wake inflow computations. Predicted stability, response, and blade-load data are validated with experimental data for several configurations, including representative articulated, hingeless, and bearingless rotors.

Bir, Gunjit↗
NASA NTRS2002

Flexible Wing Base Micro Aerial Vehicles: Micro Air Vehicles (MAVs) for Surveillance and Remote Sensor Delivery

Micro Air Vehicles (MAVs) will be developed for tracking individuals, locating terrorist threats, and delivering remote sensors, for surveillance and chemical/biological agent detection. The tasks are: (1) Develop robust MAV platform capable of carrying sensor payload. (2) Develop fully autonomous capabilities for delivery of sensors to remote and distant locations. The current capabilities and accomplishments are: (1) Operational electric (inaudible) 6-inch MAVs with novel flexible wing, providing superior aerodynamic efficiency and control. (2) Vision-based flight stability and control (from on-board cameras).

Ifju, Peter↗
DOE OSTI2025

A Machine Learning Approach Toward Improving QA/QC of Coated Particle Fuels

Coated particle fuels, such as the tristructural isotropic (TRISO) fuel particle, have been studied and developed for decades for high-temperature gas reactor (HTGR) applications because of their efficiency and relative stability under off-normal conditions. Critical to this development is a strong understanding of the relationship between fuel fabrication, properties and performance, as is how the former can be adjusted and improved to optimize the latter. Accordingly, wide-scale implementation of coated nuclear particle fuels requires thorough and robust quality assurance/quality control (QA/QC) methods for fabrication, characterization, and deployment

Conry, Bryan [ORNL] (ORCID:0000000236089604)↗
NASA NTRS2017

In Situ Thermal Imagery of Antarctic Meteorites and Their Stability on the Ice Surface

The mechanisms behind Antarctic meteorite concentrations remain enigmatic nearly 5 decades after the first recoveries, and much of the research in this direction has been based on anedcotal evidence. While these observations suggest many plausible processes that help explain Antarctic meteorite concentrations, the relative importance of these various processes (which can result in either an increase or decrease of specimens) is a critical component of any more robust model of how these concentrations form. During the 2016-2017 field season of the US Antarctic Search for Meteorites program we aquired in situ thermal imagery of meteorites specimens that provide semi-quantitative assesment of the relative temperature of these specimens and the ice. These provide insight into one hypothesized loss mechanism, the downward thermal tunnelling of meteorites warmed in the sun.

Harvey, R. P.↗
DOE OSTI2020

CAKE: Consistent Automatic Kinetic Equilibrium reconstruction

Magnetohydrodynamic equilibrium reconstructions with kinetic constraints are an essential input of many tokamak stability and transport analysis work- flows. The reconstructions themselves also contain useful information about pressure and current density distributions within the plasma which can be used to drive other calculations. While standardized magnetic-only, and partially kinetic equilibrium reconstruction is widely available and used, re- constructions for well diagnosed machines such as DIII-D, that incorporates a large and heterogeneous set of internal diagnostic measurements yet robustly reaching high numerical accuracy have been a time intensive, manual process. The Consistent Automatic Kinetic Equilibrium reconstruction tool (CAKE) has been developed and implemented at DIII-D for producing low error, kinetically constrained reconstructions without human intervention, and to identify strategies for doing so that would be broadly applicable. Here, the techniques employed to allow CAKE to handle data of limited quality and availability, as well as the full automation of the workflow may assist future efforts to form kinetic constraint profiles in real time plasma control applications.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2023

Underlying Substrate Effect on Electrochemical Activity for Hydrogen Evolution Reaction with Low‐Platinum‐Loaded Catalysts

Platinum is known as the best catalyst for the hydrogen evolution reaction (HER) but the scarcity and high cost of Pt limit its widespread applicability. Herein, the role of the underlying substrate on the HER activity of dispersed Pt atoms is uncovered. A direct current magnetron sputtering technique is utilized to deposit transition metal (TM) thin films of W, Ti, and Ta as underlying substrates for extremely low loading of Pt (<1.5 at%). The electrocatalytic performance of as‐synthesized samples for the HER is examined in both alkali and acidic media. The results show that despite the low loading of Pt, the Pt/TM catalysts produce hydrogen at a rate comparable to that of pristine bulk Pt. Pt/TM catalysts also display good stability with less than 5% decay in performance after 10 h of continuous HER operation. Based on the computational study, the excellent performance is attributed to the modified electronic properties of the Pt atoms, offering ideal binding energy for HER due to interaction with the underlying substrates. This work provides a robust and industry‐friendly route toward designing efficient catalytic systems for important electrochemical reactions such as HER and others.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

A Superconducting Praseodymium Nickelate with Infinite Layer Structure

A variety of nickel oxide compounds have long been studied for their manifestation of various correlated electron phenomena. Recently, superconductivity was observed in nanoscale infinite layer nickelate thin films of Nd 0.8 Sr 0.2 NiO 2 , epitaxially stabilized on SrTiO 3 substrates via topotactic reduction from the perovskite precursor phase. In this paper, we present the synthesis and properties of PrNiO 2 thin films on SrTiO 3 . Upon doping in Pr 0.8 Sr 0.2 NiO 2 , we observe superconductivity with a transition temperature of 7–12 K and robust critical current density at 2 K of 334 kA/cm 2 . These findings indicate that superconductivity in the infinite layer nickelates is relatively insensitive to the details of the rare earth 4 f configuration. Furthermore, they motivate the exploration of a broader family of compounds based on two-dimensional NiO 2 planes, which will enable systematic investigation of the superconducting and normal state properties and their underlying mechanisms.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2021

Skyrmion-Based Programmable Logic Device with Complete Boolean Logic Functions

A skyrmionic programmable logic device (SkrPLD) with complete Boolean logic functions is proposed and analyzed by micromagnetic simulations. The SkrPLD is based on an antiferromagnet/ferromagnet bilayer structure, in which the antiferromagnetic layer supports the interfacial Dzyaloshinskii–Moriya interaction and the out-of-plane exchange bias field for stabilizing a zero-field skyrmion. By varying the local exchange bias field, artificial pinning sites are introduced for trapping the skyrmions. Depending on the input currents and the initial position of skyrmions at different pinning sites, different logic functions can be realized. Micromagnetic simulations show that the proposed SkrPLD has robust performance even under thermal fluctuations and inhomogeneity effects. Our work can provide insights for the design of programmable spin logic devices.

74 ATOMIC AND MOLECULAR PHYSICS↗
DOE OSTI2021

Binary Atomically Dispersed Metal-Site Catalysts with Core–Shell Nanostructures for O 2 and CO 2 Reduction Reactions

Engineering atomically dispersed metal site catalysts with controlled local coordination environments and 3D nanostructures effectively improves the catalytic performance for the oxygen reduction reaction (ORR) and the carbon dioxide reduction reaction (CO 2 RR), which are critical for clean energy conversion and chemical production. Herein, an innovative approach for preparing core-shell nanostructured catalysts with different single-metal sites in the core and the shell, respectively, is developed. In particular, as the shell precursors, covalent organic polymers with a thin layered structure that is polymerized in situ and coated on a metal-doped ZIF-derived carbon core are used, followed by a controlled thermal activation. The selective combination and construction of different metal sites increase active site density in the surface layers, promote structural robustness, facilitate mass/charge transfer, and yield a possible synergy of active sites in the core and the shell. The p-FeNC(shell)@CoNC(core), consisting of a polymerized FeTPPCl-derived carbon layer (p-FeNC) on a Co-doped ZIF-derived carbon (CoNC), exhibits remarkable ORR activity and stability in acidic media along with encouraging durability in H 2 –air fuel cells. Likewise, a p-FeNC(shell)@NiNC(core) catalyst demonstrates outstanding CO 2 RR activity and stability. Hence, integrating two appropriate single-metal sites in core and shell precursors, respectively, can modulate morphological and catalytic properties for a possible synergy toward different electrocatalysis processes.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Mechanically strengthened heterogeneous Sm-Co sintered magnets

Samarium-cobalt sintered magnets offer excellent magnetic properties, thermal stability, and corrosion resistance. They are used in a variety of defense and civilian applications, especially when elevated operation temperatures (e.g., 200 ºC to 550 ºC) are required. However, the utilization of these materials is restricted by their brittleness. Improving their mechanical resilience would make them more cost-effective, efficient, and robust in decarbonization and other function-related applications while reducing the pressure on critical material supply chains. In this paper, we engineer a series of novel heterogeneous microstructures, such as laminated coarse grain (CG)/fine grain (FG) and core/shell CG/FG microstructures, to produce unprecedented combinations of superior mechanical and magnetic properties without altering the chemical compositions of the magnets or common heat treatment procedures. Further, a 60% flexural strength enhancement is obtained using heterogeneous Sm 2 (CoFeCuZr) 17 sintered magnets with little impact on their magnetic properties. The mechanically robust heterogeneous Sm-Co sintered magnets have a minor (e.g., less than 4.6%) reduction in the energy product (BH) max due to a slightly reduced squareness of the demagnetization curve, with no decrease in either the remanence (B r ) or the intrinsic coercivity (H ci ). The flexural strengths of these heterogeneous Sm-Co magnets depend on the volume ratios and mean grain sizes of the FG/CG regions, as well as their microstructural architectures. The fine-grained regions act as mechanical strengthening sites, which can be strategically used when designing the magnet for different applications. This technology is highly compatible with existing magnet manufacturing processes and thus can be adopted readily by the magnet industry.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Above the Energy Gap Law: Heavy Chalcogenide Substitution in NIR II-Emissive Diradicaloid Qubits

Near-infrared (NIR, 700–1700 nm)- and telecom (∼1260–1625 nm)-emissive molecules are good candidates for biological imaging and quantum sensing applications, respectively; however, bright low energy emission is rare due to exponentially increasing nonradiative decay rates in these regions, a phenomenon known as the energy gap law. Recent literature has emphasized the importance of minimizing skeletal modes to prevent increased nonradiative decay rates, but most organic lumiphores in these regions utilize large, conjugated scaffolds containing many C═C modes. Here we report a compact, telecom-emissive scaffold, tetrathiafulvalene-2,3,6,7-tetraselenate, or TTFts, that displays remarkable air, water, and acid stability, exhibits record quantum yields and brightness values, and retains quantum coherence under ambient conditions. These properties are enabled through methodical selenium substitution, which bathochromically shifts emission while shifting skeletal vibrations to lower energies. This new scaffold validates heavy heteroatom substitution strategies and establishes a new class of bright telecom emitters and robust qubits.

biological imaging↗
DOE OSTI2022

Synthesis of Nitro Compounds from Nitrogen Dioxide Captured in a Metal-Organic Framework

Increasing levels of air pollution are driving the need for the development of new processes that take “waste-to-chemicals”. Herein, we report the capture and conversion under ambient conditions of a major air pollutant, NO 2 , using a robust metal-organic framework (MOF) material, Zr-bptc (H 4 bptc = 3,3',5,5'-biphenyltetracarboxylic acid), comprising {Zr 6 (μ 3 -O) 4 (μ 3 -OH) 4 (COO) 12 } clusters linked by 4-connected bptc 4– ligands in an ftw topology. At 298 K, Zr-bptc shows exceptional stability and adsorption of NO 2 at both low (4.9 mmol g –1 at 10 mbar) and high pressures (13.8 mmol g –1 at 1.0 bar), as measured by isotherm experiments. Dynamic breakthrough experiments have confirmed the selective retention of NO 2 by Zr-bptc at low concentrations under both dry and wet conditions. The immobilized NO 2 can be readily transformed into valuable nitro compounds relevant to construction, agrochemical, and pharmaceutical industries. In situ crystallographic and spectroscopic studies reveal strong binding interactions of NO 2 to the {Zr 6 (μ 3 -O) 4 (μ 3 -OH) 4 (COO) 12 } cluster node. This study paves a circular pathway to enable the integration of nitrogen-based air pollutants into the production of fine chemicals.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Mechanical Behavior of Hybrids with Hyper-Connected Molecular Networks

Our research is focused on fundamental studies related to the molecular design, synthesis, characterization and modeling of molecular-reinforced hybrid glass films for superior mechanical and fracture properties. Molecular-reinforced hybrid glass films exhibit unique electro-optical properties while maintaining excellent thermal stability. They have important technological application for emerging nanoscience and energy technologies including anti-reflective and ultra-barrier layers in photovoltaics, display technologies, as well as quantum technologies. However, they are often inherently brittle in nature, do not adhere well to adjacent substrates, and exhibit poor mechanical properties. Furthermore, a robust understanding of the underlying mechanisms of deformation, fracture and fatigue has been lacking particularly given their mechanically fragile nature. The related lack of structure-property relationships between molecular structure, mechanical properties and processing represents a fundamental challenge to their integration into device technologies, compromises their thermomechanical reliability and has thwarted efforts to improve mechanical and, particularly, fracture properties.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Development and experimental qualification of novel disruption prevention techniques on DIII-D

Novel disruption prevention solutions spanning a range of control regimes are being developed and tested on DIII-D to enable ITER success. First, a new real-time control algorithm has been developed and tested for regulating nearness to stability limits and maintaining safety-margins. Its first application has been for reliable prevention of vertical displacement events (VDEs) by adjusting plasma elongation (κ) and the inner-gap between the plasma and inner-wall in response to real- time open-loop VDE growth rate (γ) estimators. VDEs were robustly prevented up to average open-loop growth rates of 800 rad/s with initial tunings, with only applying shape modification when near safety limits. Second, the disruption risk during fast, emergency shutdown after large tearing and locked modes can be significantly improved by transitioning to a limited topology during shutdown. More than 50% of emergency limited shutdowns after locked modes reach a final normalized current I N < 0.3 before terminating, scaling to the 3 MA ITER requirement. This is in contrast to diverted shutdowns, the majority of which disrupt at I N > 0.8. Despite improvements, these results highlight the critical importance of early prevention. Third, a novel emergency shut down method has been developed which excites instabilities to form a warm, helical core post-thermal quench. The current quench extends to ~100ms and avoids VDEs and runaway electron generation. Novel real-time machine learning disruption prediction has been integrated with the DIII-D proximity controller, and a real- time compatible multi-mode MHD spectroscopy technique has been developed. Results presented here were enabled by a focused effort, the Disruption Free Protocol, in DIII-D’s 2019-20 campaign to complement disruption prevention experiments with a large piggy-back program. In addition to testing novel techniques, it is estimated to have helped avoid 32 potential disruptions in piggyback operations with rapid, early shutdowns after large rotating n=1 or locked modes.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
NASA NTRS1992

Resonant cryogenic chopper

An account is given of the design features, construction, and performance of a both mechanically and thermally robust, resonant cryogenic chopper operating at 4.2 K. The chopper can occult a 2.54-cm aperture at 4.5 Hz, with approximately 1-mW dissipation. The controllability of the stator and rotor magnetic fields facilitates performance optimization and the determination of any possible interference effects. Attention is given to long-term amplitude stability determinations.

Page, Lyman A.↗
NASA NTRS2010

The Use of Remote Sensing Data for Advancing America's Energy Policy

After briefly reviewing America's Energy Policy laid out by the Obama Administration, we outline how a Global Carbon Observing System designed to monitor Carbon from space can provide the necessary data and tools to equip decision makers with the knowledge necessary to formulate effective energy use and practices policy. To stabilize greenhouse gas emissions in the atmosphere in a manner that it does not interfere with the Earth's climate system (which is one of the goals of United Nations Framework for Convention on Climate Change) requires vastly improved prediction of the atmospheric carbon dioxide (CO2) concentrations. This in torn requires a robust understanding of the carbon exchange mechanisms between atmosphere, land, and oceans and a clear understanding of the sources and sinks (i.e. uptake and storage) of CO2. We discuss how the Carbon Observing System from space aids in better understanding of the connection between the carbon cycle and climate change and provides more accurate predictions of atmospheric CO2 concentration. It also enables implementation of greenhouse gas (GHG) mitigation policies such as cap and trade programs, international climate treaties, as well as formulation of effective energy use policies.

Valinia, Azita↗
NASA NTRS2013

Effects of Varying Gravity Levels on fNIRS Headgear Performance and Signal Recovery

This paper reviews the effects of varying gravitational levels on functional Near-Infrared Spectroscopy (fNIRS) headgear. The fNIRS systems quantify neural activations in the cortex by measuring hemoglobin concentration changes via optical intensity. Such activation measurement allows for the detection of cognitive state, which can be important for emotional stability, human performance and vigilance optimization, and the detection of hazardous operator state. The technique depends on coupling between the fNIRS probe and users skin. Such coupling may be highly susceptible to motion if probe-containing headgear designs are not adequately tested. The lack of reliable and self-applicable headgear robust to the influence of motion artifact currently inhibits its operational use in aerospace environments. Both NASAs Aviation Safety and Human Research Programs are interested in this technology as a method of monitoring cognitive state of pilots and crew.

fNIRS↗
NASA NTRSDate not supplied

A 3-D Nodal-Averaged Gradient Approach for Unstructured-Grid Cell-Centered Finite-Volume Methods for Application to Turbulent Hypersonic Flow

A 2-D nodal weighted least-squares gradient method and a related face-averaged nodal gradient approach that were developed for use with triangular grids are extended to 3-D for use with tetrahedral grids. In addition, a method, developed in 2-D, to stabilize the iterative convergence of these methods on quadrilateral cells is described and extended to 3-D and remedies are investigated to determine the nodal gradient averaging approach most suitable for use with grids made up of hexahedral, prismatic, pyramidal and tetrahedral cells. Moreover, due to an interest in hypersonic flow, a robust multidimensional gradient limiter procedure that is consistent with the stencil used to construct the nodal gradients is described. Finally, we demonstrate that the resulting 3-D methods are sufficiently robust for use in scramjet computations through the solution of three canonical turbulent hypersonic flow problems as well as a physically realistic 3-D scramjet inlet geometry.

Jeffery A White↗