SEARCH · Engineering Papers

Results for “Reentry”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,333 records · Page 74

All sources NASA NTRS DOE OSTI

NASA NTRS1974

Equatorial composition in the 137- to 225-km region from the San Marco 3 mass spectrometer

The neutral atmospheric composition experiment (Nace) carried by the San Marco 3 (SM 3) satellite measured the equatorial atmospheric composition during the reentry period of Nov. 21-28, 1971. The mass density and molecular nitrogen density measured by the Nace are in agreement with values measured by rocket experiments and inferred from satellite experiments. The average total oxygen content measured by Nace is 30% below the value suggested by von Zahn at 150-km altitude. When it is assumed that his value for the molecular oxygen density at 150 km represents averaged rocket results applicable to the equatorial thermosphere, the Nace total oxygen content results in an atomic oxygen concentration comparable to the mean value of Cira (1965). The Nace helium measurements interpreted in terms of an altitude profile have an altitude distribution similar to that of molecular nitrogen below 165 km.

Newton, G. P.↗

NASA NTRS1974

Techniques for aerothermal tests of large, flightweight thermal protection panels in a Mach 7 wind tunnel

Recently developed experimental techniques permit evaluating thermal performance and structural integrity of full-scale panel concepts applicable to reentry and hypersonic vehicles in the Langley 8-foot high-performance structures tunnel. Rate and magnitude of surface heating and differential-pressure loading are independently controlled. Realistic temperature distributions are radiantly preheated into the panel prior to aerodynamic heating, and stream conditions are preselected to sustain the preheat surface heating input during aerodynamic exposure. During tunnel start and shutdown, panels are shielded outside the stream from potentially damaging transient acoustics and buffeting and are then rapidly inserted into the hypersonic flow. Infrared radiometry provides detailed surveys of surface temperatures.

Deveikis, W. D.↗

NASA NTRS1974

Viscous shock-layer flows for the space shuttle windward plane of symmetry

Predictions are presented for hypersonic, nonequilibrium viscous flows over nonanalytic blunt bodies at reentry conditions. Emphasis is placed on predictions of the viscous flowfield for the windward plane of symmetry of the space shuttle and other axisymmetric bodies which approximate the space shuttle geometry. The equations which govern the viscous shock-layer flow are presented, and the method by which the equations are solved is discussed. The predictions of the present finite-difference method are compared with predictions of other numerical methods as well as with experimental data.

Miner, E. W.↗

NASA NTRS1973

Adaptive sequential estimation with applications

A sequential estimator is presented and demonstrated which successfully tracks the system state and model errors in the presence of significant and unpredictable system or environmental variations. This adaptive estimation concept is shown to lead to a new and attractive approach to parameter identification problems. Simulation results are presented in an orbit determination problem and in a reentry trajectory estimation problem.

Jazwinski, A. H.↗

NASA NTRS1973

Assessment of possible environmental effects of space shuttle operations

The potential of shuttle operations to contribute to atmospheric pollution is investigated. Presented in this interim report are results of the study to date on rocket exhaust inventory, exhaust interactions, dispersion of the ground cloud, detection and measurement of hydrochloric acid and aluminum oxide, environmental effects of hydrochloric acid and aluminum oxide, stratospheric effects of shuttle effluents, and mesospheric and ionospheric effects of orbiter reentry. The results indicate space shuttle operation will not result in adverse environmental effects if appropriate launch constraints are met.

Cicerone, R. J.↗

NASA NTRS1975

Results of aerothermodynamic heating tests on a 0.013-scale model solid rocket booster in the NASA/LaRC unitary plan wind tunnel (SH12F)

A 0.013 scale model of the solid rocket booster (SRB) used to launch the space shuttle was tested at a Mach number of 3.7 and Reynolds numbers of 1,500,000 and 3,500,000 per foot. The objective of the test was to obtain aerodynamic heat transfer data on the surface of scaled models of the SRB at simulated full scale reentry flight conditions. Three separate models were utilized to measure film coefficients over an angle of attack range from 0 deg to 180 deg at 0 deg sideslip. All three models were representations of the MCR0200 baseline configuration and varied only by the way they were mounted in the tunnel. Model A, sting mounted thru the model base, was utilized for testing between 0 deg and 40 deg angle of attack. Model B was blade mounted from the top of the model and was tested between 60 deg and 120 deg angle of attack. Model C was sting mounted thru the model nose and utilized for testing between 140 deg and 180 deg angle of attack.

Brewer, E. B.↗

NASA NTRS1975

Monopropellant engine investigation for space shuttle reaction control system, volume 1

The results are presented of an investigation to determine the capability of a monopropellant hydrazine thruster to meet the requirements specified for the space shuttle reaction control system (RCS). Of those requirements, the major concern was whether the 100,000 seconds life could be achieved at thrust levels within the specified range. Although burn times in excess of 200,000 seconds have been demonstrated at low thrust levels, the corresponding total impulse values have been substantially lower than that required for the space shuttle RCS. Two other areas of concern, involving the catalyst, were: (1) the effects of the relatively high vehicle vibration levels on catalyst attrition and (2) the effect of exposure of the catalyst to air during atmospheric reentry of the vehicle.

Source record↗

NASA NTRS1975

Analytic and experimental evaluation of flowing air test conditions for selected metallics in a shuttle TPS application

A detailed experimental and analytical evaluation was performed to define the response of TD nickel chromium alloy (20 percent chromium) and coated columbium (R512E on CB-752 and VH-109 on WC129Y) to shuttle orbiter reentry heating. Flight conditions important to the response of these thermal protection system (TPS) materials were calculated, and test conditions appropriate to simulation of these flight conditions in flowing air ground test facilities were defined. The response characteristics of these metallics were then evaluated for the flight and representative ground test conditions by analytical techniques employing appropriate thermochemical and thermal response computer codes and by experimental techniques employing an arc heater flowing air test facility and flat face stagnation point and wedge test models. These results were analyzed to define the ground test requirements to obtain valid TPS response characteristics for application to flight. For both material types in the range of conditions appropriate to the shuttle application, the surface thermochemical response resulted in a small rate of change of mass and a negligible energy contribution. The thermal response in terms of surface temperature was controlled by the net heat flux to the surface; this net flux was influenced significantly by the surface catalycity and surface emissivity. The surface catalycity must be accounted for in defining simulation test conditions so that proper heat flux levels to, and therefore surface temperatures of, the test samples are achieved.

Schaefer, J. W.↗

NASA NTRS1974

Medical results of the Skylab program

The Skylab food system, waste management system, operational bioinstrumentation, personal hygiene provisions, in-flight medical support system, and the cardiovascular counterpressure garment worn during reentry are described. The medical experiments program provided scientific data and also served as the basis for real-time decisions on flight duration. Premission support, in-flight operational support, and postflight medical activities are surveyed. Measures devised to deal with possible food spoilage, medical instrument damage, and toxic atmosphere caused by the initial failures on the Orbital Workshop (OWS) are discussed. The major medical experiments performed in flight allowed the study of physiological changes as a function of exposure to weightless flight. The experiments included studies of the cardiovascular system, musculoskeletal and fluid/electrolyte balance, sleep, blood, vestibular system, and time and motion studies.

Johnston, R. S.↗

NASA NTRS1975

A high altitude base pressure experiment

A high-altitude base-pressure experiment has been successfully conducted on a high-performance Air Force reentry vehicle. Low Reynolds number laminar-flow flight data were obtained at an altitude of about 248,000 ft. The experiment utilized the NASA Ames vibrating diaphragm transducer specifically designed to measure base pressure at altitudes in excess of 200,000 ft with a threshold sensitivity level of 0.0002 psia. The flight data have provided needed low Reynolds number information from Reynolds numbers of about 70,000 to 10,000,000. These new data verify that a 'maximum' exists in the base pressure ratio versus Reynolds number curve at low Reynolds numbers and hypersonic Mach numbers (free-stream Mach numbers greater than 20) in qualitative agreement with the theory of Crooco and Lees (1952).

Cassanto, J. M.↗

NASA NTRS1974

Space Shuttle communications and tracking system

The Space Shuttle Program is briefly described, and the major program milestones (first horizontal flight, first vertical flight, and initial operational capability) extending over a period from 1976 to 1978 are reviewed. The communications and tracking requirements, and the system developed to meet them, are discussed for the ascent, on-orbit, reentry, and landing phases of a Shuttle mission.

Batson, B. H.↗

NASA NTRS1974

Atmospheric testing of Shuttle

Basic space shuttle launch and orbit configurations are examined. Particular attention is given to the atmospheric portion of reentry and landing, taking into account the pilot techniques, the flight control system, and questions of stability and control. Details are provided regarding a plan which has been proposed for testing the lower Mach number and altitude regime of the entry profile. The ALT program will be primarily concerned with gathering sufficient test data to verify safe subsonic aerodynamic flight and landing in the first orbital flight test approach and landing configuration.

Roosa, S. A.↗

NASA NTRS1975

Surface tension propellant acquisition system technology for Space Shuttle reaction control tanks

A program was conducted to provide the technology base for the SS/RCS flight tankage. Through a combination of analysis, subscale testing and computer predictions, a surface tension acquisition/expulsion system design was developed for the Orbiter RCS application. A full-scale tank system was fabricated and ground verification testing was conducted. Cleaning, inspection, fill and drain, and one-g expulsion performance were demonstrated. Results show that the fine-mesh screen, compartmented tank system provides the performance, flexibility, reusability, and other characteristics required by the pulsing, high flowrate RCS. It provides the required expulsion under widely differing high-g boost abort and reentry vectors oriented 119 deg apart and during on-orbit operation under omnidirectional low-g conditions.

Fester, D. A.↗

NASA NTRS1975

Description of the Space Shuttle Reaction Control System

The Space Shuttle RCS (reaction control system) is required to provide propulsion thrust for precise attitude control and three-axis translation. This capability must be provided for external tank separation, on-orbit operation, deorbit, and reentry. In order to meet these requirements a bipropellant, pressure-fed system utilizing monomethylhydrazine as fuel, and nitrogen tetroxide as oxidizer has been selected. The RCS engines include 38 primary thrusters rated at 870 lbf thrust and 6 vernier thrusters rated at 25 lbf thrust. The system is divided into three removable modules (one forward and two aft) to achieve maintenance and turnaround requirements. In order to provide additional mission flexibility, the aft modules can be connected together or interconnected with the OMS (orbital maneuvering system).

Blevins, D. R.↗

NASA NTRS1975

SEPS solar array design and technology evaluation

The technology developments required and a preliminary design of a lightweight 25 kW solar array for the solar electric propulsion stage (SEPS) have been defined. The requirements for a 65 W/Kg SEPS solar array system requires significant component weight reductions over present state-of-the-art flexible solar arrays in both electrical and structural-mechanical designs. A requirement for operation from 0.3 au to 6.0 au presents a wide range of temperature environments as well as severe combined thermal/vacuum/UV radiation environments. Additional requirements are capability for partial array retraction operation, and capability for full retraction and automatic preloading for survival of the Shuttle reentry environment. An assessment of current lightweight flexible solar array technology is made against the SEPS solar array requirements and new technology requirements are defined. A preliminary design and the operating characteristics of a flat-fold solar array system meeting the SEPS requirements is presented. A full-width, 10-ft-tall functional array model, including representative welded electrical modules and a model astromast, was fabricated and tested.

Elms, R. V., Jr.↗

NASA NTRS1975

Extension of four-dimensional atmospheric models

The cloud data bank, the 4-D atmospheric model, and a set of computer programs designed to simulate meteorological conditions for any location above the earth are described in turns of space vehicle design and simulation of vehicle reentry trajectories. Topics discussed include: the relationship between satellite and surface observed cloud cover using LANDSAT 1 photographs and including the effects of cloud shadows; extension of the 4-D model to the altitude of 52 km; and addition of the u and v wind components to the 4-D model of means and variances at 1 km levels from the surface to 25 km. Results of the cloud cover analysis are presented along with the stratospheric model and the tropospheric wind profiles.

Fowler, M. G.↗

NASA NTRS1975

A new arc heater shroud test technique for thermo-structural testing of full-scale, nose-tip skirt materials

An arc heater shroud test technique was developed for thermostructural testing of full-scale, missile nose tip-skirt assemblies. Reentry trajectory simulation is provided by changing the arc heater operation in a prescribed manner through manual and automatic controls. Excellent test repeatability allows screening of materials by direct comparison of test results. Continuous recordings of model surface temperature, pressure, heat flux, and model internal temperatures are made at several locations during the test.

Williams, R. R.↗

NASA NTRS1975

Feasibility and process scale-up low cost alumina fibers for advanced Re-usable Surface Insulation (RSI)

The objective of this program was to establish feasibility of a process to produce low cost aluminum oxide fibers having sufficient strength, flexibility, and thermal stability for multiple re-use at temperatures to 1480 C in advanced RSI type heat shields for reentry vehicles. Using bench-scale processing apparatus, the Alcoa 'Saphiber' process was successfully modified to produce nominally 8 microns diameter polycrystalline alpha-alumina fiber. Thermal stability was demonstrated in vacuum reheating tests to 1371 C and in atmospheric reheating to 1483 C. Individual fiber properties of strength, modulus, and flexibility were not determined because of friability and short length of the fiber. Rigidized tile produced from fiber of nominally 8, 20 and 40 micron diameter had thermal conductivities significantly higher than those of RSI SiO2 or mullite at relatively low temperature but became comparable above about 1000 C. Tile densities were high due to short fiber length, especially in the coarser diameter fiber. No significant effect of fiber diameter on thermal properties could be determined form the data. Mechanical properties of tiles deteriorated as fiber diameter increased.

Pearson, A.↗