Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “RAMAN SPECTRA”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,333 records · Page 74

High-pressure structural study of MnF 2

In this study, manganese fluoride (MnF 2 ) with the tetragonal rutile-type structure has been studied using a synchrotron angle-dispersive powder x-ray diffraction and Raman spectroscopy in a diamond anvil cell up to 60 GPa at room temperature combined with first-principles density functional calculations. The experimental data reveal two pressure-induced structural phase transitions with the following sequence: rutile → SrI 2 type (3 GPa)→ α–PbCl 2 type (13 GPa). Complete structural information, including interatomic distances, has been determined in the case of MnF 2 including the exact structure of the debated first high-pressure phase. First-principles density functional calculations confirm this phase transition sequence, and the two calculated transition pressures are in excellent agreement with the experiment. Lattice dynamics calculations also reproduce the experimental Raman spectra measured for the ambient and high-pressure phases. The results are discussed in line with the possible practical use of rutile-type fluorides in general and specifically MnF 2 as a model compound to reveal the HP structural behavior of rutile-type SiO 2 (Stishovite).

36 MATERIALS SCIENCE↗

Barium titanate nanoparticles: Short-range lattice distortions with long-range cubic order

Barium titanate (BTO) nanoparticles (sizes 10 to 500 nm) exhibit a displacement of the Ti atom from the center of the Perovskite unit cell as inferred from synchrotron X-ray diffraction patterns (XRD) analyzed using atomic pair distribution functions (PDFs). Fits to PDFs acquired at temperatures of 20° to 220°C indicate that these Ti displacements (~ 0.1 Å) are comparable to or even greater than those in the bulk material. Moreover, these displacements persist at temperatures well above 120°C where the tetragonal to pseudo-cubic phase transition occurs in the bulk. Tetragonal Raman spectral lines were observed for all sizes of these BTO nanoparticles and confirm a distorted unit cell up to 120°C. Above 120°C, the small BTO nanoparticles (10, 50, 100 nm) continue to display tetragonal Raman lines, though with slowly decreasing amplitudes as the temperature rises. In contrast, the tetragonal Raman lines of large BTO nanoparticles (300, 400, 500 nm) disappear abruptly above 120°C, suggestive of bulk material. Indeed, fits to large-particle X-ray PDFs over the range 20-60 Å reveal a sharp, long-range structural change toward a cubic lattice at 120°C, again consistent with bulk material. This sharp, long-range structural change is absent in the small particles. In fact, laboratory XRD Bragg peak profiles for the small BTO particles appear to be singlets at 20°C, indicating that significant long-range cubic order already exists at room temperature. As temperature rises, this long-range cubic order is gradually reinforced as inferred from long-range fits of the small particle PDFs. By combining information from X-ray PDFs, Raman spectra, and Bragg peak profiles, we conclude that small BTO nanoparticles exhibit both short-range (unit-cell) distortion and long-range (mesoscale) cubic order from 20° to 220°C, while the large nanoparticles behave as bulk material, differing from small particles only by exhibiting long-range tetragonal order below 120°C and a mesoscale structural phase change at 120°C.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Pressure-induced reentrant transition in NbS 3 phases: Combined Raman scattering and x-ray diffraction study

In this paper we report the evolution of charge density wave states under pressure for two NbS 3 phases: triclinic (phase I) and monoclinic (phase II) at room temperature. Raman and x-ray diffraction (XRD) techniques are applied. The x-ray studies on the monoclinic phase under pressure show a compression of the lattice at different rates below and above ~7 GPa but without a change in space group symmetry. The Raman spectra of the two phases evolve similarly with pressure; all peaks almost disappear in the ~6–8 GPa range, indicating a transition from an insulating to a metallic state, and peaks at new positions appear above 8 GPa. The results suggest suppression of the ambient charge-density waves and their subsequent recovery with new orderings above 8 GPa.

36 MATERIALS SCIENCE↗

Mode-Selective Coupling of Coherent Phonons to the Bi2212 Electronic Band Structure

Cuprate superconductors host a multitude of low-energy optical phonons. Using time- and angle-resolved photoemission spectroscopy, we study coherent phonons in Bi 2 Sr 2 Ca 0.92 Y 0.08 Cu 2 O 8+δ . Sub-meV modulations of the electronic band structure are observed at frequencies of 3.94 ± 0.01 and 5.59 ± 0.06 THz. For the dominant mode at 3.94 THz, the amplitude of the band energy oscillation weakly increases as a function of momentum away from the node. Theoretical calculations allow identifying the observed modes as CuO 2 -derived A 1 g phonons. The Bi- and Sr-derived A 1 g modes which dominate Raman spectra in the relevant frequency range are absent in our measurements. Furthermore, this highlights the mode selectivity for phonons coupled to the near-Fermi-level electrons, which originate from CuO 2 planes and dictate thermodynamic properties.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Multiple-stage structure transformation of organic-inorganic hybrid perovskite CH 3 NH 3 PbI 3

In this study, by performing spatially resolved Raman and photoluminescence spectroscopy with varying excitation wavelength, density, and data acquisition parameters, we achieve a unified understanding towards the spectroscopy signatures of the organic-inorganic hybrid perovskite, transforming from the pristine state (CH 3 NH 3 PbI 3 ) to the fully degraded state (i.e., PbI 2 ) for samples with varying crystalline domain size from mesoscopic scale (approximately 100 nm) to macroscopic size (centimeters), synthesized by three different techniques. We show that the hybrid perovskite exhibits multiple stages of structure transformation occurring either spontaneously or under light illumination, with exceptionally high sensitivity to the illumination conditions (e.g., power, illumination time, and interruption pattern). We highlight four transformation stages (stages I-IV, with stage I being the pristine state) along either the spontaneous or photoinduced degradation path exhibiting distinctly different Raman spectroscopy features at each stage, and point out that previously reported Raman spectra in the literature reflect highly degraded structures of either stage III or stage IV. Additional characteristic optical features of partially degraded materials under the joint action of spontaneous and photodegradation are also given. This study offers reliable benchmark results for understanding the intrinsic material properties and structure transformation of this unique category of hybrid materials, and the findings are pertinently important to a wide range of potential applications where the hybrid material is expected to function in greatly different environment and light-matter interaction conditions.

14 SOLAR ENERGY↗

Colloquium : Physical properties of group-IV monochalcogenide monolayers

The state-of-the-art knowledge of ferroelectric and ferroelastic group-IV monochalcogenide monolayers is surveyed. These semiconductors feature remarkable structural and mechanical properties, such as a switchable in-plane spontaneous polarization, soft elastic constants, structural degeneracies, and thermally driven two-dimensional structural transformations. Additionally, these 2D materials display selective valley excitations, valley Hall effects, and persistent spin helix behavior. After a description of their Raman spectra, a discussion of optical properties arising from their lack of centrosymmetry (such as an unusually strong second-harmonic intensity, large bulk photovoltaic effects, photostriction, and tunable exciton binding energies) is provided as well. Here, the physical properties observed in these materials originate from (correlate with) their intrinsic and switchable electric polarization, and the physical behavior hereby reviewed could be of use in nonvolatile memory, valleytronic, spintronic, and optoelectronic devices: these 2D multiferroics enrich and diversify the 2D material toolbox.

2D ferroelectrics↗

High-pressure polymorphism in pyridine

Single crystals of the high-pressure phases II and III of pyridine have been obtained by in situ crystallization at 1.09 and 1.69 GPa, revealing the crystal structure of phase III for the first time using X-ray diffraction. Phase II crystallizes in P 2 1 2 1 2 1 with Z ′ = 1 and phase III in P 4 1 2 1 2 with Z ′ = ½. Neutron powder diffraction experiments using pyridine-d 5 establish approximate equations of state of both phases. The space group and unit-cell dimensions of phase III are similar to the structures of other simple compounds with C 2v molecular symmetry, and the phase becomes stable at high pressure because it is topologically close-packed, resulting in a lower molar volume than the topologically body-centred cubic phase II. Phases II and III have been observed previously by Raman spectroscopy, but have been mis-identified or inconsistently named. Raman spectra collected on the same samples as used in the X-ray experiments establish the vibrational characteristics of both phases unambiguously. The pyridine molecules interact in both phases through CH...π and CH...N interactions. The nature of individual contacts is preserved through the phase transition between phases III and II, which occurs on decompression. A combination of rigid-body symmetry mode analysis and density functional theory calculations enables the soft vibrational lattice mode which governs the transformation to be identified.

36 MATERIALS SCIENCE↗

Characterization of FeCl 3 Intercalation Doped CVD Few-Layer Graphene

Historically, intercalation doping has been theoretically and experimentally studied on Chemical Vapor Deposition (CVD) synthesized few-layer graphene. Density Functional Theory calculations identified FeCl 3 as a good dopant to reduce the sheet resistance of few-layer graphene. A simple vapor transfer approach is employed to dope graphene. The successful doping is confirmed by the Raman spectra as well as electrical measurements. After doping, graphene shows p-type conducting behavior and its conductance is significantly enhanced compared with that of undoped graphene. 3-layer graphene exhibited a sheet resistance of 40 Ω/$\square$, while 4-layer graphene has even smaller sheet resistance of 20 Ω/$\square$, with transmittance ≥ 90% for both cases. which offer the best combination of sheet resistance and transmittance among all previously reported transparent conductors.

42 ENGINEERING↗

Effects of the iron content and redox state on the structure of sodium borosilicate glasses: A Raman, Moessbauer and boron K-edge XANES spectroscopy study

The structure of iron-bearing sodium borosilicate glasses with up to 10 mol% FeO has been investigated in the range 0.15 ≤ Fe{sup 3+}/SFe ≤ 0.95. According to Moessbauer spectroscopy, Fe{sup 3+} and Fe{sup 2+} are mainly in tetrahedral and octahedral coordination, respectively, although other coordination states exist for both cations. From XANES experiments, we conclude that increasing Fe content and varying redox states have only a minor effect on the relative proportions of BO{sub 3} and BO{sub 4} units. In Raman spectra, a decrease of the proportion of BO{sub 4} species present in danburite-like units (Na{sub 2}O.B{sub 2}O{sub 3}.2SiO{sub 2}) is found upon increasing iron content and oxidizing state. Whereas the insensitivity of the overall boron speciation to iron content and redox state points to weak interactions between boron and iron, the changes affecting BO{sub 4} species do indicate a more subtle interplay between Fe{sup 3+} and the other tetrahedrally coordinated cations (Si,B) because of the competition between tetrahedral Fe{sup 3+} and B{sup 3+} for charge compensation by Na{sup +}. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Radiation Stability of Spark‐Plasma‐Sintered Lead Vanadate Iodoapatite

Spark‐plasma‐sintered lead vanadate iodoapatite Pb 9.85 (VO 4 ) 6 I 1.7 , a promising nuclear waste form for the immobilization of I‐129, was irradiated with energetic ions, electrons, and gamma rays, to investigate its radiation stability. In situ TEM observation of the 1 MeV Kr 2+ irradiation shows that lead vanadate iodoapatite generally exhibits higher tolerance against ion irradiation‐induced amorphization than lead vanadate fluorapatite, and the spark plasma sintering can further enhance its radiation stability attributed to the enhanced crystallinity, reduced defect concentration, and denser microstructure. The critical amorphization dose and critical temperature for the SPS‐densified iodoapatite at 700°C are determined to be 0.25 dpa at room temperature and 230°C, respectively. No significant phase transformation or microstructural damage occurred under energetic electron and gamma irradiations. Raman spectra of gamma‐ray‐irradiated iodoapatite indicate improved V–O bond order at 500 kGy dose. Generally, the spark‐plasma‐sintered iodoapatite exhibits excellent radiation stability for nuclear waste form applications. The significantly enhanced radiation stability of the SPS‐densified iodoapatite suggests that SPS holds great promise for fabricating iodoapatite waste form with minimum iodine loss and optimized radiation tolerance for effective management of highly volatile I‐129.

Lu, Fengyuan↗

Shocked chromites in fossil L chondrites: A Raman spectroscopy and transmission electron microscopy study

Abstract Chromites from Middle Ordovician fossil L chondrites and from matrix and shock‐melt veins in Catherwood, Tenham, and Coorara L chondrites were studied using Raman spectroscopy and TEM . Raman spectra of chromites from fossil L chondrites showed similarities with chromites from matrix and shock‐melt veins in the studied L chondrite falls and finds. Chromites from shock‐melt veins of L chondrites show polycrystallinity, while the chromite grains in fossil L chondrites are single crystals. In addition, chromites from shock‐melt veins in the studied L chondrites have high densities of planar fractures within the subgrains and many subgrains show intergrowths of chromite and xieite. Matrix chromite of Tenham has similar dislocation densities and planar fractures as a chromite from the fossil meteorite Golvsten 001 and higher dislocation densities than in chromite from the fossil meteorite Sextummen 003. Using this observation and knowing that the matrix of Tenham experienced 20–22 GP a and <1000° C, an upper limit for the P,T conditions of chromite from Golvsten 001 and Sextummen 003 can be estimated to be 20–22 GP a and 1000° C (shock stage S3–S6) and 20 GP a and 1000° C (S3–S5), respectively, and we conclude that the studied fossil meteorite chromites are from matrix.

Rout, Surya S.↗

Effect of oxygen on growth and properties of diamond thin film deposited at low surface temperature

Polycrystalline diamond thin films are grown on a p-type Si (100) single crystal substrate at a low surface deposition temperature of 455 deg. C using a microwave plasma enhanced chemical vapor deposition process in an Ar-rich Ar/H{sub 2}/CH{sub 4} plasma containing different oxygen levels from 0% to 0.75%. The surface deposition temperatures are measured and monitored by an IR thermometer capable of working in a plasma environment without any interference from the plasma emissions. The lower surface deposition temperature at high microwave power of 1300 W and higher gas pressure of 95 torr is achieved by active cooling of the substrate from the backside using a specially designed cooling stage. An enhanced growth rate from 0.19 to 0.63 {mu}m/h is observed with varying oxygen from 0% to 0.75% in the plasma. Diamond grain size also increased from 0.69 {mu}m for the sample with no oxygen to 1.74 {mu}m for the sample with 0.75% oxygen. The diamond films are characterized using x-ray diffraction, environmental scanning electron microscopy field emission gun, Raman spectroscopy, and x-ray photoelectron spectroscopy. The enhanced growth rate is correlated with the enhanced atomic hydrogen to C{sub 2} ratio with increasing oxygen concentration in the plasma, which is measured by an in situ optical emission spectroscopy.

36 MATERIALS SCIENCE↗

Does hydrogen change the fullerenelike structure in CN{sub x} thin films?

The authors have reported the structure of the nanoclusters in carbon nitride thin films before [D. Roy et al., Phys. Rev. B 70, 035406 (2004)]. In this work, effects of the addition of hydrogen in the deposition gas mixture on the structures of carbon nitride thin films prepared by magnetron sputtering were investigated using Raman spectroscopy. Raman measurements showed that the structures of carbon nanoclusters remained unaffected by the addition of hydrogen in the carbon nitride films. On the other hand, the structures of amorphous thin films were affected by the addition of hydrogen in the deposition gas mixture. These are explained in terms of changes in the ratios of the D-peak to the G-peak intensities and shifts in the G-peak centers.

36 MATERIALS SCIENCE↗

Influence of temperature on the hydrogenated amorphous carbon films prepared by plasma-enhanced chemical vapor deposition

Hydrogenated amorphous carbon (a-C:H) films were deposited in a plasma-enhanced chemical vapor deposition (PECVD) system. The substrate temperature at deposition was found to have significant effects on the film stoichiometry, sp{sup 2} phase, and optical properties. Raman spectroscopy reveals an increase in sp{sup 2}-bonded carbon and a continual structure ordering of the sp{sup 2} phase with increasing substrate temperature at deposition. Thermal desorption spectroscopy analysis revealed that the onset temperature of CH{sub 4} effusion of PECVD a-C:H films increase with increasing substrate temperatures, implicating enhanced structural stability via elevating the substrate temperature at deposition. The extinction coefficient k measured from spectroscopic ellipsometry gradually increases with increasing substrate temperature at deposition, due possibly to the graphitization effect which decreases the optical gap resulting in higher k.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Pseudomorphic growth of InAs on misoriented GaAs for extending quantum cascade laser wavelength

The authors have studied the impact of epilayer strain on the deposition of InAs/GaAs on (100) and (111)B with 2° offset toward<2-1-1> surfaces. Consequences of a 7% lattice mismatch between these orientations in the form of three-dimensional growth are less apparent for (111)B with 2° offset toward<2-1-1> surfaces compared to (100). By exploring a range of molecular beam epitaxy process parameters for InAs/GaAs growth and utilizing scanning electron microscopy, atomic force microscopy, and Raman spectroscopy to evaluate the quality of these strained layers, the authors develop empirical models that describe the influence of the process conditions in regards to surface roughness with >92% accuracy. The smoothest InAs/GaAs samples demonstrated average surface roughness of 0.08 nm for 10 μm{sup 2} areas, albeit at very low deposition rates. The authors have found the most important process conditions to be substrate temperature and deposition rate, leading us to believe that controlling diffusion length may be the key to reducing defects in severely strained structures. InGaAs/AlGaAs quantum cascade laser structures were also produced on (111)B with 2° offset toward<2-1-1> to take advantage of the piezoelectric effect, and the modified laser transitions due to these effects were observed.

36 MATERIALS SCIENCE↗

Folded acoustic phonons in Si/Ge superlattices with Ge quantum dots

The spectra of Raman scattering by folded acoustic phonons in Si/Ge superlattices with pseudomorphic layers of Ge quantum dots (QDs) grown by low-temperature (T = 250 Degree-Sign C) molecular beam epitaxy are studied. New features of the folded phonon lines related to the resonant enhancement and unusual intensity ratio of the doublet lines that cannot be explained by the existing theory have been observed. The observed modes are shown to be related to the vibrations localized to the QDs and induced by the folded phonons of the Si spacer layers. The calculations performed in the model of a one-dimensional chain of atoms have allowed the nature of the localization of acoustic phonons attributable to a modification of the phonon spectrum of a thin QD layer to be explained. The observed intensity ratio of the folded phonon doublet lines is caused by asymmetry of the relief of the QD layers.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Raman scattering in semiconductor structures based on monophthalocyanine and triphthalocyanine molecules incorporating erbium ions

Semiconductor structures of the type of butyl-substituted erbium monophthalocyanine and triphthalocyanine are studied by Raman spectroscopy. It is shown that, when the sandwich-like structure of the molecule incorporating two complexing atoms between the ligands is considered instead of the planar molecular structure with one ligand and one metal atom, a series of lines appears in the Raman spectrum. In this series, the wave numbers of the lines represent an arithmetic progression with the arithmetical ratio {approx}80 cm{sup -1}. It is suggested that this feature is due to the larger number of organic molecules per metal atom in the triphthalocyanine complex, and the four Raman peaks at the frequencies 122, 208, 280, and 362 cm{sup -1} are the manifestation of slight out-of-plane vibrations of the phthalocyanine ligands.

36 MATERIALS SCIENCE↗

Plasma Treated Active Carbon for Capacitive Deionization of Saline Water

The plasma treatment on commercial active carbon (AC) was carried out in a capacitively coupled plasma system using Ar + 10% O 2 at pressure of 4.0 Torr. The RF plasma power ranged from 50 W to 100 W and the processing time was 10 min. The carbon film electrode was fabricated by electrophoretic deposition. Micro-Raman spectroscopy revealed the highly increased disorder of sp 2 C lattice for the AC treated at 75 W. An electrosorption capacity of 6.15 mg/g was recorded for the carbon treated at 75 W in a 0.1 mM NaCl solution when 1.5 V was applied for 5 hours, while the capacity of the untreated AC was 1.0 mg/g. The plasma treatment led to 5.09 times increase in the absorption capacity. The jump of electrosorption capacity by plasma treatment was consistent with the Raman spectra and electrochemical double layer capacitance. This work demonstrated that plasma treatment was a potentially efficient approach to activating biochar to serve as electrode material for capacitive deionization (CDI).

36 MATERIALS SCIENCE↗