Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “RAMAN EFFECT”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,333 records · Page 74
All sourcesNASA NTRSDOE OSTI
DOE OSTI2015

Microstructure and magnetic properties of MFe{sub 2}O{sub 4} (M = Co, Ni, and Mn) ferrite nanocrystals prepared using colloid mill and hydrothermal method

Three kinds of spinel ferrite nanocrystals, MFe{sub 2}O{sub 4} (M = Co, Ni, and Mn), are synthesized using colloid mill and hydrothermal method. During the synthesis process, a rapid mixing and reduction of cations with sodium borohydride (NaBH{sub 4}) take place in a colloid mill then through a hydrothermal reaction, a slow oxidation and structural transformation of the spinel ferrite nanocrystals occur. The phase purity and crystal lattice parameters are estimated by X-ray diffraction studies. Scanning electron microscopy and transmission electron microscopy images show the morphology and particle size of the as-synthesized ferrite nanocrystals. Raman spectrum reveals active phonon modes at room temperature, and a shifting of the modes implies cation redistribution in the tetrahedral and octahedral sites. Magnetic measurements show that all the obtained samples exhibit higher saturation magnetization (M{sub s}). Meanwhile, experiments demonstrate that the hydrothermal reaction time has significant effects on microstructure, morphologies, and magnetic properties of the as-synthesized ferrite nanocrystals.

36 MATERIALS SCIENCE↗
DOE OSTI2014

Combined effects of Bi deficiency and Mn substitution on the structural transformation and functionality of BiFeO{sub 3} films

Mn-doped BiFeO{sub 3} films with Mn contents of 5 and 10 mol. % were prepared via a chemical route. A carefully controlled amount of Bi deficiency was introduced to further tune the lattice structure and the functionality of multiferroic BiFeO{sub 3}. The crystal structure of Bi{sub 1−δ}Fe{sub 1−x}Mn{sub x}O{sub 3} films was investigated by X-ray diffraction and Raman spectra; a rhombohedral-to-orthorhombic phase transition was revealed. The observed double hysteresis loops and two capacitance maxima from polarization vs electric field and capacitance-voltage measurements indicate an antiferroelectric-like behavior. Additionally, the coexistence of ferroelectric (FE) and antiferroelectric (AFE) phases in Bi{sub 1−δ}Fe{sub 1−x}Mn{sub x}O{sub 3} films was revealed from the domain structures obtained by piezoelectric force microscopy. The effects of Mn substitution in conjunction with Bi deficiency on the FE-AFE phase transition and electrical behavior of BiFeO{sub 3} films are discussed in detail. Meanwhile, magnetic and photoluminescence measurements on the films illustrate that Mn substitution gives rise to the net magnetic moment and the defects induced by both Bi deficiency and Mn substitution influence the electronic structure of BiFeO{sub 3} films. This study thus shows a simple and effective way to control the functionalities of BiFeO{sub 3} films.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2017

Sorption Behavior of Iodide Ions on Calcium Silicate Hydrate Formed under the Condition Saturated with Saline Water - 17069

The sorption behavior of iodide ions on calcium-silicate-hydrate (CSH gel) under the condition saturated with saline water was examined by using a Raman spectroscopy and ICP-AES, without drying process. In the sorption experiments, I-127 is a stable isotope was used as an alternative of I-129. CSH gel was synthesized with mixing CaO, SiO{sub 2}, and NaCl solution. The Ca/Si molar ratios of CSH gel were set to 0.4, 0.8, 1.2 and 1.6, and the concentration of NaCl solution was set to 0.6 M for simulating the condition of saline groundwater. The liquid/solid weight ratios of CSH gel were set to 10, 13, 15, 17, and 20, and the total weight of solid phase was 1.5 g. Furthermore, at the preparation of CSH gel, the substance of iodide ions in each sample was adjusted to 15 μmol. The synthesis procedure for all samples was conducted in a glove bag filled with nitrogen gas. The curing period was 7, 14, 30, and 60 days at a room temperature (298 K) with shaking at 120 strokes/min. The results of the sorption experiments, iodide ions adsorbed on CSH gel regardless of the high concentration of NaCl. The concentration of iodide ions in liquid phase was equal to the initial one under all experimental conditions. Moreover, the distribution coefficients, K{sub d}, were kept constant (K{sub d} = 1 mL/g) after 14 days. In the results of Raman analysis, the structure of CSH gel was scarcely influenced by incorporating iodide ions from the viewpoint of the silicate chain. These results suggest that iodide ions will be incorporated into CSH gel with the hydration water without changing its structure. Such effect of CSH gel formed with leaching cementitious constituents around the repository may retard the migration of radionuclide (I-129) in the natural barrier of the radioactive waste disposal system. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗
DOE OSTI2016

Large modification in insulator-metal transition of VO{sub 2} films grown on Al{sub 2}O{sub 3} (001) by high energy ion irradiation in biased reactive sputtering

High energy ion irradiation in biased reactive sputtering enabled significant modification of insulator-metal transition (IMT) properties of VO{sub 2} films grown on Al{sub 2}O{sub 3} (001). Even at a high biasing voltage with mean ion energy of around 325 eV induced by the rf substrate biasing power of 40 W, VO{sub 2} film revealed low IMT temperature (T{sub IMT}) at 309 K (36 °C) together with nearly two orders magnitude of resistance change. Raman measurements from −193 °C evidenced that the monoclinic VO{sub 2} lattice begins to transform to rutile-tetragonal lattice near room temperature. Raman spectra showed the in-plane compressive stress in biased VO{sub 2} films, which results in shortening of V–V distance along a-axis of monoclinic structure, a{sub M}-axis (c{sub R}-axis) and thus lowering the T{sub IMT}. In respect to that matter, significant effects in shortening the in-plane axis were observed through transmission electron microscopy observations. V2p{sub 3/2} spectra from XPS measurements suggested that high energy ion irradiation also induced oxygen vacancies and resulted for an early transition onset and rather broader transition properties. Earlier band gap closing against the temperature in VO{sub 2} film with higher biasing power was also probed by ultraviolet photoelectron spectroscopy. Present results with significant modification of IMT behavior of films deposited at high-energy ion irradiation with T{sub IMT} near the room temperature could be a newly and effective approach to both exploring mechanisms of IMT and further applications of this material, due to the fixed deposition conditions and rather thicker VO{sub 2} films.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Mitigating Heavy Ion Irradiation‐Induced Degradation in p‐type SnO Thin‐Film Transistors at Room Temperature

The study investigates the mitigation of radiation damage on p‐type SnO thin‐film transistors (TFTs) with a fast, room‐temperature annealing process. Atomic layer deposition is utilized to fabricate bottom‐gate TFTs of high‐quality p‐type SnO layers. After 2.8 MeV Au 4+ irradiation at a fluence level of 5.2 × 10 12 ions cm −2 , the output drain current and on/off current ratio ( I on / I off ) decrease by more than one order of magnitude, field‐effect mobility ( μ FE ) reduces more than four times, and subthreshold swing (SS) increases more than four times along with a negative shift in threshold voltage. The observed degradation is attributed to increased surface roughness and defect density, as confirmed by scanning electron microscopy (SEM), high‐resolution micro‐Raman, and transmission electron microscopy (TEM) with geometric phase analysis (GPA). A technique is demonstrated to recover the device performance at room temperature and in less than a minute, using the electron wind force (EWF) obtained from low‐duty‐cycle high‐density pulsed current. At a pulsed current density of 4.0 × 10 5 A cm −2 , approximately four times increase in I on / I off is observed, 41% increase in μ FE , and 20% decrease in the SS of the irradiated TFTs, suggesting effectiveness of the new annealing technique.

Al-Mamun, Nahid Sultan↗
DOE OSTI2018

Metal ion-mediated structure and properties of α-Fe2O3 nanoparticles

Highlights: • Cu- and Zn-doped Fe{sub 2}O{sub 3} nanoparticles were successfully obtained by a simple solvothermal method. • The sizes and morphologies of the doped Fe{sub 2}O{sub 3} nanoparticles could be regulated by doping with divalent cations. • The doped Fe{sub 2}O{sub 3} nanoparticles showed enhanced remanent magnetization and coercivity. • The doped Fe{sub 2}O{sub 3} nanoparticles showed excellent catalytic activity toward thermal decomposition of ammonium perchlorate. • The enhanced catalytic activity could be attributed to the defect structure induced by doping with divalent cations. - Abstract: To assess the relationship between metal ion-mediated microstructures and the macro-performance, Cu- and Zn-doped α-Fe{sub 2}O{sub 3} nanoparticles were prepared via a solvothermal method. The morphologies of the as-synthesized nanoparticles were investigated by scanning electron microscopy and transmission electron microscopy. The results revealed that the sizes and morphologies could be regulated by doping with divalent cations. The structures of the as-synthesized nanoparticles were characterized by X-ray diffraction and Raman spectroscopy, indicating that Cu{sup 2+} and Zn{sup 2+} ions had diffused into the lattice of α-Fe{sub 2}O{sub 3} matrix. The magnetization behaviors of these nanoparticles were measured to analyze the effect of doping on α-Fe{sub 2}O{sub 3}. Furthermore, the catalytic activities of Cu- and Zn-doped α-Fe{sub 2}O{sub 3} nanoparticles demonstrated that the high-temperature decomposition temperature of ammonium perchlorate could be lowered by 115 °C and 107 °C, respectively, compared to that of ammonium perchlorate without catalyst. The enhanced catalytic activity could be attributed to the defect structure induced by doping with divalent cations.

77 NANOSCIENCE AND NANOTECHNOLOGY↗
DOE OSTI2014

The correlation of epitaxial graphene properties and morphology of SiC (0001)

The electronic properties of epitaxial graphene (EG) on SiC (0001) depend sensitively on the surface morphology of SiC substrate. Here, 2–3 layers of graphene were grown on on-axis 6H-SiC with different step densities realized through controlling growth temperature and ambient pressure. We show that epitaxial graphene on SiC (0001) with low step density and straight step edge possesses fewer point defects laying mostly on step edges and higher carrier mobility. A relationship between step density and EG mobility is established. The linear scan of Raman spectra combined with the atomic force microscopy morphology images revealed that the Raman fingerprint peaks are nearly the same on terraces, but shift significantly while cross step edges, suggesting the graphene is not homogeneous in strain and carrier concentration over terraces and step edges of substrates. Thus, control morphology of epitaxial graphene on SiC (0001) is a simple and effective method to pursue optimal route for high quality graphene and will be helpful to prepare wafer sized graphene for device applications.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2019

Isotope-Engineering the Thermal Conductivity of Two-Dimensional MoS 2

Isotopes represent a degree of freedom that might be exploited to tune the physical properties of materials while preserving their chemical behaviors. In this work, we demonstrate that the thermal properties of two-dimensional (2D) transition-metal dichalcogenides can be tailored through isotope engineering. Monolayer crystals of MoS 2 were synthesized with isotopically pure 100 Mo and 92 Mo by chemical vapor deposition employing isotopically enriched molybdenum oxide precursors. The in-plane thermal conductivity of the 100 MoS 2 monolayers, measured using a non-destructive, optothermal Raman technique, is found to be enhanced by ~50% compared with the MoS 2 synthesized using mixed Mo isotopes from naturally occurring molybdenum oxide. The boost of thermal conductivity in isotopically pure MoS 2 monolayers is attributed to the combined effects of reduced isotopic disorder and a reduction in defect-related scattering, consistent with observed stronger photoluminescence and longer exciton lifetime. Finally, these results shed light on the fundamentals of 2D nanoscale thermal transport important for the optimization of 2D electronic devices.

2D materials↗
DOE OSTI2014

Effect of annealing temperature on the contact properties of Ni/V/4H-SiC structure

A sandwich structure of Ni/V/4H-SiC was prepared and annealed at different temperatures from 650 °C to 1050 °C. The electrical properties and microstructures were characterized by transmission line method, X-ray diffraction, Raman spectroscopy and transmission electron microscopy. A low specific contact resistance of 3.3 × 10{sup -5} Ω·cm{sup 2} was obtained when the Ni/V contact was annealed at 1050 °C for 2 min. It was found that the silicide changed from Ni{sub 3}Si to Ni{sub 2}Si with increasing annealing temperature, while the vanadium compounds appeared at 950 °C and their concentration increased at higher annealing temperature. A schematic diagram was proposed to explain the ohmic contact mechanism of Ni/V/4H-SiC structure.

36 MATERIALS SCIENCE↗
DOE OSTI2026

Metal oxide-promoted calcium cuprate catalysts for diol oxidative dehydrocyclization to lactones

Here, this work investigates structure-function relationships in electronically tunable, redox-active, basic Cu-Ca mixed metal oxide catalysts for oxidative dehydrocyclization of liquid diols to lactones. Compositional screening identified Ni 2+ and Zn 2+ as effective promoters that increase the surface Cu 2+ population by ∼1.7× and Cu-normalized activity for liquid 1,4-butanediol conversion to γ-butyrolactone by ∼3–4×. In situ Raman spectroscopy, in situ X-ray absorption spectroscopy (XAS), in situ diffuse-reflectance Fourier transform infrared spectroscopy (DRIFTS), ex situ X-ray diffraction (XRD), and H 2 -temperature-programmed reduction (H 2 -TPR) show that Ni 2+ or Zn 2+ incorporation promotes the formation of Ca 0.82 Cu 1.00 O 2 nanoparticles under mild calcination conditions. This cuprate phase features stronger and shorter Cu–O bonds (1.90 Å) than inactive bulk CuO (1.95 Å) and square-planar Cu 2+ O 4 sites with enhanced d z2 electrophilicity, strengthening alkoxy adsorption. Pyridine-DRIFTS confirms the purely basic nature of the catalyst surface, while methanol-DRIFTS indicates Cu 2+ surface enrichment with Ni or Zn promotion, where Cu–O(Ca)–Cu sites can exist as amorphous domains or a truncation layer on crystalline nanoparticles.

09 BIOMASS FUELS↗
DOE OSTI2014

Effects of CeO2 Support Facets on VOx/CeO2 Catalysts in Oxidative Dehydrogenation of Methanol

CeO2 supports with dominating facets, i.e., low index (100), (110) and (111) facets, are prepared. The facet effects on the structure and catalytic performance of supported vanadium oxide catalysts are investigated using oxidative dehydrogenation of methanol as a model reaction. In the presence of mixed facets, Infrared and Raman characterizations demonstrate that surface vanadia species preferentially deposit on CeO2 (100) facets, presumably because of its higher surface energy. At the same surface vanadium densities, VOx species on (100) facets show better dispersion, followed by (110) and (111) facets. The VOx species on CeO2 nanorods with (110) and (100) facets display higher activity and lower apparent activation energies compared to that on CeO2 nanopolyhedras with dominating (111) facets and CeO2 nanocubes with dominating (100) facets. The higher activity for VOx/CeO2(110) might be related to the more abundant oxygen vacancies present on the (110) facets, evidenced from Raman spectroscopic measurements.

ceria↗
DOE OSTI2021

Journal Pre-proof3D printed polylactic acid and acrylonitrile butadiene styrene fluidicstructures for biological applications: tailoring bio-material interfaceviasurface modification

Three-dimensional (3D) printing is a rapidly growing technology that best fits for cell culture and other biological applications due to its potential to build immensely complex structures from customized designs. However, use of 3D printed structures for cell adhesion, proliferation, and activation requires tailoring of surface characteristics. In this context, this work investigates the use of two biocompatible 3D printable polymer materials, Poly-L-lactic Acid (PLA) and Acrylonitrile Butadiene Styrene (ABS) for bio applications, and the effect of their post-printing surface modification processes to achieve desired bio functionality. Three post-printing surface modification techniques, alkaline hydrolysis, ultraviolet ozone plasma irradiation and gold thin film deposition are performed with the objective of introducing useful levels of surface functionalities. Poly-L-lysine (PLL) labelled with FITC chromophore is immobilized on the surface modified samples following standard protocols. The effect of surface roughness and porosity of the 3D printed structures on the polypeptide immobilization is compared on as-printed versus mechanically polished surfaces. Different characterization methods, viz., Fluorescence microscopy, Raman Spectroscopy and UV–vis spectroscopy, are used to study the efficacy of the surface modification and PLL immobilization techniques. Our results demonstrated denser PLL attachment on polished hydrolyzed PLA and ABS surfaces which enables the use of these printable polymers for a range of applications such as tissue scaffolds and microfluidics.

3D Printing, PLA, ABS, Biodegradable Polymer, Surf↗
DOE OSTI2021

Cluster defects in gibbsite nanoplates grown at acidic to neutral pH

Gibbsite [α-Al(OH) 3 ] is the solubility limiting phase for aluminum across a wide pH range, and it is a common mineral phase with many industrial applications. The growth mechanism of this layered-structure material, however, remains incompletely understood. Synthesis of gibbsite at low to circumneutral pH yields nanoplates with substantial interlayer disorder. Here we examine defects in this material in detail, and the effects of recrystallization in highly alkaline sodium hydroxide solution at 80 °C. We employed a multimodal approach, including scanning electron microscopy, magic-angle spinning nuclear magnetic resonance (MAS-NMR), Raman and infrared spectroscopies, X-ray diffraction (XRD), and X-ray total scattering pair distribution function (XPDF) analysis to characterize the ageing of the nanoplates over several days. Additionally, XRD and XPDF indicate that gibbsite nanoplates precipitated at circumneutral pH contain dense, truncated sheets imparting a local difference in interlayer distance. These interlayer defects appear well described by flat Al 13 aluminum hydroxide nanoclusters nearly isostructural with gibbsite sheets present under synthesis conditions and trapped as interlayer inclusions during growth. Ageing at elevated temperature in alkaline solutions gradually improves crystallinity, showing a gradual increase in H-bonding between interlayer OH groups. Between 7 to 8 vol% of the initial gibbsite nanoparticles exhibit this defect, with the majority of differences disappearing after 2–4 hours of recrystallization in alkaline solution. The results not only identify the source of disorder in gibbsite formed under acidic/neutral conditions but also point to a possible cluster-mediated growth mechanism evident through inclusion of relict oligomers with gibbsite-like topology trapped in the interlayer spaces.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2014

Molecular self ordering and charge transport in layer by layer deposited poly (3,3‴-dialkylquarterthiophene) films formed by Langmuir-Schaefer technique

The performance of π-conjugated polymer based electronic devices is directly governed by the molecular morphology of polymer aggregation, the extent to which a molecule is electronically coupled (self ordered and interacted) to neighboring molecules, and orientation. The well electronic coupled and crystalline/ordered polymer films have the potential to enhance the charge transport properties up to a benchmark. However, there is insufficient knowledge about the direct formation of large area, oriented, crystalline, and smooth films. In this study, we have presented Langmuir Schaefer technique to obtain the large area, oriented, crystalline, and smooth film of Poly (3,3‴-dialkylquarterthiophene) (PQT-12) polymer. The effect of self ordering and orientation of PQT-12 polymer on optical, morphological, and charge transport properties has been investigated. The prepared films have been characterized by UV-vis spectroscopy, Raman spectroscopy, transmission electron microscopy (TEM), selected area diffractions pattern (SAED), and atomic force microscopy (AFM) techniques. UV-vis spectra, TEM, SAED, and AFM images of monolayer films reveal the formation of well ordered and electronically coupled polymer domains. Layer by layer deposited films reveal the change in the orientation, which is confirmed by Raman spectra. Electronic properties and layer dependent charge transport properties are investigated using sandwiched structure Al/PQT-12/ITO Schottky configuration with perpendicular to the deposited films. It is observed that the charge transport properties and device electronic parameters (ideality factor and turn on voltage) are significantly changing with increasing the number of PQT-12 layers. Our study also demonstrates the charge transport between polymer crystallites and cause of deviation of ideal behavior of organic Schottky diodes. It may be further explored for improving the performance of other organic and optoelectronic devices.

36 MATERIALS SCIENCE↗
DOE OSTI2014

Fe ion-implanted TiO{sub 2} thin film for efficient visible-light photocatalysis

This work shows the application of metal ion-implantation to realize an efficient second-generation TiO{sub 2} photocatalyst. High fluence Fe{sup +} ions were implanted into thin TiO{sub 2} films and subsequently annealed up to 550 °C. The ion-implantation process modified the TiO{sub 2} pure film, locally lowering its band-gap energy from 3.2 eV to 1.6–1.9 eV, making the material sensitive to visible light. The measured optical band-gap of 1.6–1.9 eV was associated with the presence of effective energy levels in the energy band structure of the titanium dioxide, due to implantation-induced defects. An accurate structural characterization was performed by Rutherford backscattering spectrometry, transmission electron microscopy, Raman spectroscopy, X-ray diffraction, and UV/VIS spectroscopy. The synthesized materials revealed a remarkable photocatalytic efficiency in the degradation of organic compounds in water under visible light irradiation, without the help of any thermal treatments. The photocatalytic activity has been correlated with the amount of defects induced by the ion-implantation process, clarifying the operative physical mechanism. These results can be fruitfully applied for environmental applications of TiO{sub 2}.

36 MATERIALS SCIENCE↗
DOE OSTI2017

Temperature-dependent vibrational spectra and structure of liquid water from classical and quantum simulations with the MB-pol potential energy function

The structure of liquid water as a function of temperature is explored through the modeling of infrared and Raman spectra along with structural order parameters calculated from classical and quantum molecular dynamics simulations with the MB-pol many-body potential energy function. The magnitude of nuclear quantum effects is also monitored by comparing the vibrational spectra obtained from classical and centroid molecular dynamics, both in intensities and peak positions. The observed changes in spectral activities are shown to reflect changes in the underlying structure of the hydrogen-bond network and are found to be particularly sensitive to many-body effects in the representation of the electrostatic interactions. As a whole, good consensus is found with the experimental spectra, which provides further evidence for the accuracy of MB-pol in predicting the properties of water.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2018

Size-dependent phase transition of Er 2 O 3 under high pressure

In this work, The size effect on the structural and optical properties of cubic Er 2 O 3 was investigated under pressure by in-situ angular dispersive synchrotron x-ray diffraction (AD-XRD), Raman scattering, photoluminescence (PL), and impedance spectroscopy. Contrary to the phase transition sequence of cubic→monoclinic→hexagonal in bulk Er 2 O 3 , a transformation from cubic directly to hexagonal was observed in Er 2 O 3 nanoparticals. Compared with bulk Er 2 O 3 , nano-Er 2 O 3 showed an obvious elevation of phase transition pressure and larger bulk module. A third-order Birch-Murnaghan fitting yields zero pressure bulk moduli ( B 0 ) of 181(5), and 226(4) GPa and their pressure derivatives ( B' 0 ) of 4.0(7), 1.9(5) for the cubic and hexagonal phases, respectively. The multiple PL lines of 4 S 3/2 → 4 I 15/2 originating from the cubic phase are also altered due to phase transformation. The impedance spectroscopy indicated that the nano-Er 2 O 3 is an insulator up to 30 GPa. These findings give a fresh understanding of size influence on the phase transition sequences and sheds light on the applications of nano-Er 2 O 3 .

36 MATERIALS SCIENCE↗
DOE OSTI2017

High-pressure behavior of A 2 B 2 O 7 pyrochlore (A=Eu, Dy; B=Ti, Zr)

In situ high-pressure X-ray diffraction and Raman spectroscopy were used to determine the influence of composition on the high-pressure behavior of A 2 B 2 O 7 pyrochlore (A=Eu, Dy; B=Ti, Zr) up to ~50GPa. Based on X-ray diffraction results, all compositions transformed to the high-pressure cotunnite structure. The B-site cation species had a larger effect on the transition pressure than the A-site cation species, with the onset of the phase transformation occurring at ~41 GPa for B=Ti and ~16 GPa B=Zr. However, the A-site cation affected the kinetics of the phase transformation, with the transformation for compositions with the smaller ionic radii, i.e., A=Dy, proceeding faster than those with a larger ionic radii, i.e., A=Eu. These results were consistent with previous work in which the radius-ratio of the A- and B-site cations determined the energetics of disordering, and compositions with more similarly sized A- and B-site cations had a lower defect formation energy. Raman spectra revealed differences in the degree of short-range order of the different compositions. Due to the large phase fraction of cotunnite at high pressure for B=Zr compositions, Raman modes for cotunnite could be observed, with more modes recorded for A=Eu than A=Dy. These additional modes are attributed to increased short-to-medium range ordering in the initially pyrochlore structured Eu 2 Zr 2 O 7 as compared with the initially defect-fluorite structured Dy 2 Zr 2 O 7 .

36 MATERIALS SCIENCE↗