Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “RAM”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,333 records · Page 74

Numerical study of shock-wave/boundary layer interactions in premixed hydrogen-air hypersonic flows

A computational study of shock wave/boundary layer interactions involving premixed combustible gases, and the resulting combustion processes is presented. The analysis is carried out using a new fully implicit, total variation diminishing (TVD) code developed for solving the fully coupled Reynolds-averaged Navier-Stokes equations and species continuity equations in an efficient manner. To accelerate the convergence of the basic iterative procedure, this code is combined with vector extrapolation methods. The chemical nonequilibrium processes are simulated by means of a finite-rate chemistry model for hydrogen-air combustion. Several validation test cases are presented and the results compared with experimental data or with other computational results. The code is then applied to study shock wave/boundary layer interactions in a ram accelerator configuration. Results indicate a new combustion mechanism in which a shock wave induces combustion in the boundary layer, which then propagates outwards and downstream. At higher Mach numbers, spontaneous ignition in part of the boundary layer is observed, which eventually extends along the entire boundary layer at still higher values of the Mach number.

Yungster, Shaye↗

Attitude determination and calibration using a recursive maximum likelihood-based adaptive Kalman filter

An adaptive Kalman filter design that utilizes recursive maximum likelihood parameter identification is discussed. At the center of this design is the Kalman filter itself, which has the responsibility for attitude determination. At the same time, the identification algorithm is continually identifying the system parameters. The approach is applicable to nonlinear, as well as linear systems. This adaptive Kalman filter design has much potential for real time implementation, especially considering the fast clock speeds, cache memory and internal RAM available today. The recursive maximum likelihood algorithm is discussed in detail, with special attention directed towards its unique matrix formulation. The procedure for using the algorithm is described along with comments on how this algorithm interacts with the Kalman filter.

Kelly, D. A.↗

Atomic oxygen interaction with solar array blankets at protective coating defect sites

Atomic oxygen in the low-Earth-orbital environment oxidizes SiOx protected polyimide Kapton solar array blankets at sites which are not protected such as pin windows or scratches in the protective coatings. The magnitude and shape of the atomic oxygen undercutting which occurs at these sites is dependent upon the exposure environment details such as arrival direction and reaction probability. The geometry of atomic oxygen undercutting at defect sites exposed to atomic oxygen in plasma asher was used to develop a Monte Carlo model to simulate atomic oxygen erosion processes at defect sites in protected Kapton. Comparisons of Monte Carlo predictions and experimental results are presented for plasma asher atomic oxygen exposures for large and small defects as well as for protective coatings on one or both sides of Kapton. The model is used to predict in-space exposure results at defect sites for both directed and sweeping atomic oxygen exposure. A comparison of surface textures predicted by the Monte Carlo model and those experimentally observed from both directed space ram and laboratory plasma asher atomic oxygen exposure indicate substantial agreement.

Banks, Bruce A.↗

Atomic oxygen degradation of Intelsat 4-type solar array interconnects: Laboratory investigations

A Hughes 506 type communication satellite belonging to the Intelsat organization was marooned in low Earth orbit on March 14, 1990, following failure of the Titan third stage to separate properly. The satellite, Intelsat VI, was designed for service in geosynchronous orbit and contains several material configurations which are susceptible to attack by atomic oxygen. Analysis showed the silver foil interconnects in the satellite photovoltaic array to be the key materials issue because the silver is exposed directly to the atomic oxygen ram flux. The results are reported of atomic oxygen degradation testing of Intelsat VI type silver foil interconnects both as virgin material and in a configured solar cell element. Test results indicate that more than 80 pct. of the original thickness of silver in the Intelsat VI solar array interconnects should remain after completion of the proposed Space Shuttle rescue and/or reboost mission.

Koontz, S. L.↗

Single board system for fuzzy inference

The very large scale integration (VLSI) implementation of a fuzzy logic inference mechanism allows the use of rule-based control and decision making in demanding real-time applications. Researchers designed a full custom VLSI inference engine. The chip was fabricated using CMOS technology. The chip consists of 688,000 transistors of which 476,000 are used for RAM memory. The fuzzy logic inference engine board system incorporates the custom designed integrated circuit into a standard VMEbus environment. The Fuzzy Logic system uses Transistor-Transistor Logic (TTL) parts to provide the interface between the Fuzzy chip and a standard, double height VMEbus backplane, allowing the chip to perform application process control through the VMEbus host. High level C language functions hide details of the hardware system interface from the applications level programmer. The first version of the board was installed on a robot at Oak Ridge National Laboratory in January of 1990.

Symon, James R.↗

LDEF contaminants analysis data

Modification of surface texture for Ram Facing FEP Teflon on the Long Duration Exposure Facility (LDEF) satellite is documented. Photos of changes in surface texture if thermal blanket material with position on tray C-08 are presented. Infrared spectra and photographic documentation of molecular film deposits on LDEF surfaces by location is reported. Results of a survey of the functional groups and elemental composition of the brown film found widely distributed on the surface of LDEF is shown. A partial photographic catalog of LDEF particulate contaminants is included. A set of photos of particles collected or photographed in place on the surface of LDEF is shown. Particle counts and surface obscuration data for the LDEF satellite are reported. The surface data in tables and charts is presented for the LDEF satellite by location.

Crutcher, E. Russ↗

Dynamic (computer) modelling of the particulate environment: Transformations from the LDEF reference frame to decode geocentric and interplanetary populations

The Long Duration Exposure Facility's impact signature record and the size frequency distribution of craters and perforations offers a unique record of environmental data referenced conveniently to the geocentric reference frame. Chemical analysis of residues can offer only limited assistance. Hence, flux modelling has been developed to transform from both geocentric orbital distributions and geocentrically unbounded interplanetary source distributions. This is applied to the foil and crater penetration records in the Ram (E), Trailing (W), and Space Pointing directions to offer the means of decoding the records. It shows that the mix of the components is size dependent. Parametric forms of the modelling transformations are presented for the orbital and unbound populations.

Mcdonnell, J. A. M.↗

Atomic oxygen stimulated outgassing

The passive Long Duration Exposure Facility (LDEF) Experiment A0034, Atomic Oxygen Simulated Outgassing, consisted of two identical one-sixth tray modules, exposing selected thermal control coatings to atomic oxygen and the combined space environment on the leading edge and, for reference, to the relative wake environment on the trailing edge. Optical mirrors were included adjacent to the thermal coatings for deposition of outgassing products. Ultraviolet grade windows and metal covers were provided for additional assessment of the effects of the various environmental factors. Preliminary results indicate that orbital atomic oxygen is both a degrading and a optically restorative factor in the thermo-optical properties of selected thermal coatings. There is evidence of more severe optical degradation on collector mirrors adjacent to coatings that were exposed to the RAM-impinging atomic oxygen. This evidence of atomic oxygen stimulated outgassing is discussed in relation to alternative factors that could affect degradation. The general effects of the space environment on the experiment hardware as well as the specimens are discussed.

Linton, Roger C.↗

Condition of chromic acid anodized aluminum clamps flown

A survey of the condition of the chromic acid anodized (CAA) coating on selected LDEF tray clamps was carried out. Measurements of solar absorptance and thermal emittance were carried out at multiple locations on both the space exposed and spacecraft facing sides of the clamps. Multiple clamps from each available angle relative to the ram direction were examined. The diffuse component of the reflectance spectrum was measured for a selected subset of the clamps. The thickness of the CAA was determined for a small set of clamps. Examples of variation in integrity of the coatings from leading to trailing edge will be shown.

Plagemann, W. L.↗

Patterns of discoloration and oxidation by direct and scattered fluxes, especially oxygen on silicon

A number of interesting discoloration patterns are clearly evident on M0002-1 which resides on three faces of LDEF: front face, rear face, and earth face. Most interesting is the pattern of blue oxidation on polished single crystal silicon apparently produced by once-scattered ram oxygen atoms along the earth face. Most of the other patterns are seen in the Thermal Control Paint. Also, severe oxidation of CR-39 polycarbonate occurred on the front face of LDEF, as expected. A complete explanation for the patterns has not yet been obtained.

Frederickson, A. R.↗

Results from analysis of Boeing composite specimens flown on LDEF experiment M0003

Specimens of three selected organic/graphite fiber composite materials were flown on both the leading and trailing edges of LDEF. Additional sets of compression, tension, flexure, and lap shear specimens were flown on the trailing edge. A large T300/934 panel was flown on the leading edge. One quarter of this specimen was directly exposed to a near ram environment; each of the other three quarters were covered with a different thermal control paint. Results of mechanical, optical, and chemical analysis of the specimens are presented. Recession rates of the fiber and resin under atomic oxygen exposure were estimated and are reported.

Hill, Sylvester G.↗

An investigation to determine the producibility of a 3-D braider and bias direction weaving loom

The development of prototype machines for the production of generalized braid patterns is described. Mechanical operating principles and control strategies are presented for two prototype machines which were fabricated and evaluated. Both machines represent advances over current techniques for forming composite material preforms by enabling near ideal control of fiber orientation. Furthermore, they overcome both the lack of general control of produced fiber architectures and the complexity of other weaving processes that were produced for the same purpose. One prototype, the modified Farley braider, consists of an array of turntables which can be rotated 90 degrees and returned; hence, they can form tracks in the x and y axis. Yarn ends are transported about the surface formed by the turntables using motorized tractors. These tractors are controlled using an optical link with a control circuit and host computer. The tractors are powered through electrical contact with the turntables. The necessary relative motions are produced by a series of linear tractor moves combined with a sequence of turntable rotations. The movement of the tractors about the surface causes the yarns to produce the desired braiding pattern. The second device, the shuttle plate braider, consists of a braiding surface formed by an array of square elements, each separated from its neighbor by a gap. Beneath this surface lies a shuttle plate, which reciprocates first in one axis and then in the other. As this movement takes place, yarn carrying shuttles engage and disengage the plate by means of solenoid activated pins. By selective engagement and disengagement, the shuttles can move the yarn ends in any desired pattern, forming the desired braid. Control power, and control signals, are transmitted from the electronic interface circuit and host computer, via the braiding surface through electrical contact with the shuttles. Motive power is proved to the shuttles by motion of the shuttle plate, which is passively driven using pneumatic rams. Each shuttle is a simple device that uses only a solenoid to engage the plate and is a simple device that uses only a solenoid to engage the plate and is independently controllable. When compared with each other, the modified Farley braider has the advantage of speed, and the shuttle plate braider the advantage of mechanical control and simplicity.

Huey, Cecil O., Jr.↗

An advanced hypervelocity aerophysics facility - A ground-based flight-test range

The paper discusses a concept for a ground-based flight-test facility, a large aeroballistic range capable of launching models large enough to permit the installation of significant amounts of onboard instrumentation. The large model size would also provide thick shock/boundary layers, thus providing the opportunity to measure flow-field properties via advanced offboard diagnostics. Current fabrication technology should permit the construction of a two-stage light-gas gun capable of accelerating 20 to 25 cm diameter models to velocities on the order of 6 km/sec. An electromagnetic launcher or a ram accelerator is considered as a potential means for achieving larger model sizes and/or greater launch velocities. Possible methods for obtaining and recording data are discussed as are the test chamber and model deceleration section requirements.

Witcofski, R. D.↗

Evidence for environmental effects on early-type galaxy X-ray halos

Possible causes for the large dispersion in the X-ray luminosities (Lx) of early-type galaxies are discussed. It is shown that early-type galaxies with relatively low values of Lx for a given optical luminosity L(B) have about 50 percent more neighbors than galaxies with relatively high Lx, suggesting that low-Lx galaxies tend to be in denser environments. It is concluded that the large dispersion in X-ray luminosity, for a given L(B) might be caused either by ram-pressure stripping of the gaseous halos or by mergers.

White, Raymond E., III↗

Numerical study of shock-wave/boundary layer interactions in premixed hydrogen-air hypersonic flows

A computational study of shock wave/boundary layer interactions involving premixed combustible gases, and the resulting combustion processes is presented. The analysis is carried out using a new fully implicit, total variation diminishing (TVD) code developed for solving the fully coupled Reynolds-averaged Navier-Stokes equations and species continuity equations in an efficient manner. To accelerate the convergence of the basic iterative procedure, this code is combined with vector extrapolation methods. The chemical nonequilibrium processes are simulated by means of a finite-rate chemistry model for hydrogen-air combustion. Several validation test cases are presented and the results compared with experimental data or with other computational results. The code is then applied to study shock wave/boundary layer interactions in a ram accelerator configuration. Results indicate a new combustion mechanism in which a shock wave induces combustion in the boundary layer, which then propagates outwards and downstream. At higher Mach numbers, spontaneous ignition in part of the boundary layer is observed, which eventually extends along the entire boundary layer at still higher values of the Mach number.

Yungster, Shaye↗

Bow shock models of ultracompact H II regions

This paper presents models of ultracompact H II regions as the bow shocks formed by massive stars, with strong stellar winds, moving supersonically through molecular clouds. The morphologies, sizes and brightnesses of observed objects match the models well. Plausible models are provided for the ultracompact H II regions G12.21 - 0.1, G29.96 - 0.02, G34.26 + 0.15, and G43.89 - 0.78. To do this, the equilibrium shape of the wind-blown shell is calculated, assuming momentum conservation. Then the shell is illuminated with ionizing radiation from the central star, radiative transfer for free-free emission through the shell is performed, and the resulting object is visualized at various angles for comparison with radio continuum maps. The model unifies most of the observed morphologies of ultracompact H II regions, excluding only those objects with spherical shells. Ram pressure confinement greatly lengthens the life of ultracompact H II regions, explaining the large number that exist in the Galaxy despite their low apparent kinematic ages.

Mac Low, Mordecai-Mark↗

A windswept cometary tail on the Galactic center supergiant IRS 7

High-resolution VLA observations provide evidence of optically thick radio emission from IRS 7, a cool red supergiant star, located at a projected distance of roughly 1 1t-yr from the Galactic center. IRS 7 shows a remarkable tail of ionized gas pointing directly away from the compact nonthermal radio source at the Galactic center, Sgr A(asterisk). Given previous evidence for a strong source of UV emission and for a strong circumnuclear wind emanating from the Galactic center, the free-free emission from IRS 7 and its associated tail are interpreted in terms of the ionization and removal of the circumstellar envelope of the red supergiant either by the ram pressure of the nuclear wind or by the pressure of radiation arising from the immediate vicinity of Sgr A(asterisk). The wind mechanism is preferred because: (1) the force it can potentially exert is much greater; and (2) Sgr A(asterisk) is clearly not a known source of luminous energy in the near-IR, whereas it remains a plausible source of a hot, high-velocity wind. Also considered is the potential effect of a nuclear wind upon the atmospheres of red giants in the inner parsec.

Yusef-Zadeh, F.↗

Influence of the solar wind/interplanetary medium on Saturnian kilometric radiation

Previous studies on the periodicities of the Saturnian kilometric radiation (SKR) suggested a considerable solar wind influence on the occurrence of SKR, so it was obvious to investigate the relationship between parameters of the solar wind/interplanetary medium and this Saturnian radio component. Voyager 2 data from the Plasma Science experiment, the Magnetometer experiment and the Planetary Radio Astronomy experiment were used to analyze the external control of SKR. Out of the examined quantities known to be important in controlling magnetospheric processes this investigation yielded a dominance of the solar wind momentum, ram pressure and kinetic energy flux, in stimulating SKR and controlling its activity and emitted energy, and confirmed the results of the Voyager 1 analysis.

Rucker, Helmut O.↗