Statistical Properties of Bit Strings Sampled from Sycamore Random Quantum Circuits
Not provided.
Chemistry↗
SEARCH · Engineering Papers
Results for “Quantum technologies”
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
422 Million intrinsic quality factor planar integrated all-waveguide resonator with sub-MHz linewidth
High quality-factor (Q) optical resonators are a key component for ultra-narrow linewidth lasers, frequency stabilization, precision spectroscopy and quantum applications. Integration in a photonic waveguide platform is key to reducing cost, size, power and sensitivity to environmental disturbances. However, to date, the Q of all-waveguide resonators has been relegated to below 260 Million. Here, we report a Si 3 N 4 resonator with 422 Million intrinsic and 3.4 Billion absorption-limited Qs. The resonator has 453 kHz intrinsic, 906 kHz loaded, and 57 kHz absorption-limited linewidths and the corresponding 0.060 dB m -1 loss is the lowest reported to date for waveguides with deposited oxide upper cladding. These results are achieved through a careful reduction of scattering and absorption losses that we simulate, quantify and correlate to measurements. This advancement in waveguide resonator technology paves the way to all-waveguide Billion Q cavities for applications including nonlinear optics, atomic clocks, quantum photonics and high-capacity fiber communications.
36 MATERIALS SCIENCE↗
Dislocation-position fluctuations in solid 4He as collective variables in a quantum crystal
Abstract Quantum behavior at mesoscopic length scales is of significant interest, both from a fundamental-physics standpoint, as well as in the context of technological advances. In this light, the description of collective variables comprising large numbers of atoms, but nevertheless displaying non-classical behavior, is a fundamental problem. Here, we show that an effective-Hamiltonian approach for such variables, as has been applied to describe the quantum behavior of coupled qubit/oscillator systems, can also be very useful in understanding intrinsic behavior of quantum materials. We consider lattice dislocations – naturally occurring mesoscopic line defects in crystals – in the prototypical bosonic quantum crystal, solid 4 He. For this purpose, we map fully atomistic quantum simulations onto effective one-dimensional Hamiltonians in which the collective dislocation-position variables are represented as interacting, massive quantum particles. The results provide quantitative understanding of several experimental observations in solid 4 He.
75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
Efficient blue light-emitting diodes based on quantum-confined bromide perovskite nanostructures
The emergence of inorganic–organic hybrid perovskites, a unique class of solution-processable crystalline semiconductors, provides new opportunities for large-area, low-cost and colour-saturated light-emitting diodes (LEDs) ideal for display and solid-state lighting applications1. However, the performance of blue perovskite LEDs (PeLEDs) is far inferior to that of their near-infrared, red and green counterparts, strongly limiting the practicality of the PeLED technology. Here, we demonstrate blue PeLEDs emitting at 483 nm with colour coordinates of (0.094, 0.184) and operating with a peak external quantum efficiency of up to 9.5% at a luminance of 54 cd m –2 . The devices have a T50 lifetime of 250 s for an initial brightness of 100 cd m –2 . The efficient blue electroluminescence originates from a structure of quantum-confined perovskite nanoparticles embedded within quasi-two-dimensional phases with higher bandgaps, prepared by an antisolvent processing scheme. Our work paves the way towards high-performance PeLEDs in the blue region.
37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
A numerically exact description of ultrafast vibrational decoherence in vibration-coupled electron transfer
Broadband pump–probe spectroscopy has been widely used to measure vibrational decoherence associated with the reaction coordinate in photoinduced ultrafast vibration-coupled electron transfer (VCET) reactions. These experiments provide insight into the interplay of intramolecular coordinates along the reaction coordinate. However, a general theoretical foundation for analyzing, and even for explaining rigorously, these data is lacking. In this work, we study vibrational decoherence in a model VCET reaction using the nearly exact time-dependent density matrix renormalization group simulation method. We explore how analyzing the density matrix with quantum information measures can help elucidate the evolution of vibrational coherence in simulations of dynamics. We examine how vibrational coherence is affected by electron transfer on the timescale of approximately 100 femtoseconds. Our results suggest that electron transfer, in the nonadiabatic model, changes the vibrational equilibrium position abruptly—an example of a “quantum quench” event. This explains the concomitant vibrational decoherence. We find that abrupt vibrational decoherence can be mitigated by wavepacket motion occurring on the timescale of the electron transfer.
Science & Technology - Other Topics↗
Solitons in Arbitrary Dimensions Stabilized by Photon-Mediated Interactions
We propose a scheme to generate solitons in arbitrary dimensions, in a matter-wave interferometer, without the need of quantum degeneracy. In our setting, solitons emerge by balancing the single-particle dispersion with engineered cavity-mediated exchange interactions between two wave packets, which, at the appropriate conditions, remain bound to each other and dispersion-free. For detection in thermal gases, we propose an interferometric probing scheme instead of traditional time-of-flight imaging.
cavity quantum electrodynamics↗
Selective and Scalable Control of Spin Quantum Memories in a Photonic Circuit
A central goal in many quantum information processing applications is a network of quantum memories that can be entangled with each other while being individually controlled and measured with high fidelity. This goal has motivated the development of programmable photonic integrated circuits (PICs) with integrated spin quantum memories using diamond color center spin-photon interfaces. However, this approach introduces a challenge into the microwave control of individual spins within closely packed registers. Here, we present a quantum memory-integrated photonics platform capable of (i) the integration of multiple diamond color center spins into a cryogenically compatible, high-speed programmable PIC platform, (ii) selective manipulation of individual spin qubits addressed via tunable magnetic field gradients, and (iii) simultaneous control of qubits using numerically optimized microwave pulse shaping. The combination of localized optical control, enabled by the PIC platform, together with selective spin manipulation opens the path to scalable quantum networks on intrachip and interchip platforms.
37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
Highly Efficient Room‐Temperature Spin‐Orbit‐Torque Switching in a Van der Waals Heterostructure of Topological Insulator and Ferromagnet
Abstract All‐Van der Waals (vdW)‐material‐based heterostructures with atomically sharp interfaces offer a versatile platform for high‐performing spintronic functionalities at room temperature. One of the key components is vdW topological insulators (TIs), which can produce a strong spin‐orbit‐torque (SOT) through the spin‐momentum locking of their topological surface state (TSS). However, the relatively low conductance of the TSS introduces a current leakage problem through the bulk states of the TI or the adjacent ferromagnetic metal layers, reducing the interfacial charge‐to‐spin conversion efficiency ( q ICS ). Here, a vdW heterostructure is used consisting of atomically‐thin layers of a bulk‐insulating TI Sn‐doped Bi 1.1 Sb 0.9 Te 2 S 1 and a room‐temperature ferromagnet Fe 3 GaTe 2, to enhance the relative current ratio on the TSS up to ≈20%. The resulting q ICS reaches ≈1.65 nm −1 and the critical current density J c ≈0.9 × 10 6 Acm −2 at 300 K, surpassing the performance of TI‐based and heavy‐metal‐based SOT devices. These findings demonstrate that an all‐vdW heterostructure with thickness optimization offers a promising platform for efficient current‐controlled magnetization switching at room temperature.
2D ferromagnet↗
Sequence-selective dynamic covalent assembly of information-bearing oligomers
Relatively robust dynamic covalent interactions have been employed extensively to mediate molecular self-assembly reactions; however, these assembly processes often do not converge to a thermodynamic equilibrium, instead yielding mixtures of kinetically-trapped species. Here, we report a dynamic covalent self-assembly process that mitigates kinetic trapping such that multiple unique oligomers bearing covalently coreactive pendant groups are able to undergo simultaneous, sequence-selective hybridization with their complementary strands to afford biomimetic, in-registry molecular ladders with covalent rungs. Analogous to the thermal cycling commonly employed for nucleic acid melting and annealing, this is achieved by raising and lowering the concentration of a multi-role reagent to effect quantitative dissociation and subsequently catalyze covalent bond rearrangement, affording selective assembly of the oligomeric sequences. The hybridization specificity afforded by this process further enabled information encoded in oligomers to be retrieved through selective hybridization with complementary, mass-labeled sequences.
36 MATERIALS SCIENCE↗
Measurement of correlated charge noise in superconducting qubits at an underground facility
The charge environment of superconducting qubits may be studied through the introduction of controlled, quantified amounts of ionizing radiation. We measure space- and time-correlated charge jumps on a four-qubit device, operating 107 meters below the Earth’s surface in a low-radiation, cryogenic facility designed for the characterization of low-threshold particle detectors. The rock overburden of this facility reduces the cosmic ray muon flux by over 99% compared to laboratories at sea level. Combined with 4π coverage of a movable lead shield, this facility enables quantifiable control over the flux of ionizing radiation on the qubit device. Long-time-series charge tomography measurements on these weakly charge-sensitive qubits capture discontinuous jumps in the induced charge on the qubit islands, corresponding to the interaction of ionizing radiation with the qubit substrate. The rate of these charge jumps scales with the flux of ionizing radiation on the qubit package, as characterized by a series of independent measurements on another energy-resolving detector operating simultaneously in the same cryostat with the qubits. Using lead shielding, we achieve a minimum charge jump rate of $0.19^{+0.04}_{-0.03}$ mHz, almost an order of magnitude lower than that measured in surface tests, but a factor of roughly seven higher than expected based on reduction of ambient gammas alone. We operate four qubits for over 22 consecutive hours with zero correlated charge jumps at length scales above three millimeters.
46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗
Trace xenon detection in ambient helium by double-pulse laser-induced breakdown spectroscopy
We demonstrate double-pulse LIBS enhances the Xenon signal up to 14× at a concentration of 1 μmol mol −1 in an ambient helium environment.
22 GENERAL STUDIES OF NUCLEAR REACTORS↗
Classical trajectory Monte Carlo simulation of plasma fueling using magnetic plasma expulsion
The possibility of fueling a magnetically confined plasma using particle sources located inside of the plasma is studied by computer simulation. Magnetic plasma expulsion [R. E. Phillips and C. A. Ordonez, Phys. Plasmas 25, 012508 (2018)] would serve to keep the magnetically confined plasma away from the particle sources without adversely affecting plasma confinement. The simulations show how charged particles can be injected into a plasma by using particle sources located directly between two current-carrying wires that create a magnetic expulsion field. Plasma fueling with the average energy of injected particles greater than the average energy of plasma particles may serve for heating the plasma. Also, plasma fueling with positive and negative particles injected at different rates may serve for changing the neutrality of the plasma. Conditions for plasma fueling are investigated using a classical trajectory Monte Carlo simulation. Two types of particle sources are considered, and the fraction of emitted particles that reach (and fuel) the magnetically confined plasma is evaluated for each.
71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
Analysis and equivalent circuit for accurate wideband calculations of the impedance for a piezoelectric transducer having loss
Others have analyzed the operation of piezoelectric transducers by defining two complex parameters which have the units of frequency to allow for the effects of loss. The present paper presents an analysis in which this procedure is extended to include harmonics as well as the fundamental frequency. In this extension it is seen that both positive and negative extrema in both the resistance and the conductance occur at a series of harmonics. Equivalent circuits are also presented with examples for both high-Q and low-Q materials showing agreement with these simulations.
71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
Percolation and nanosecond fluctuators in V 2 O 3 films within the metal–insulator transition
Vanadium sesquioxide (V 2 O 3 ) exhibits a metal–insulator transition (MIT) at 160 K between a low temperature, monoclinic, antiferromagnetic Mott insulator and a high temperature, rhombohedral, paramagnetic, metallic phase. In thin films, a percolative transition takes place over a finite temperature range of phase coexistence. We study the fluctuating dynamics of this percolative MIT by measuring voltage noise spectra at both low frequencies (up to 100 kHz) and radio frequencies (between 10 MHz and 1 GHz). Noise intensity quadratic in bias is observed in the MIT region, as expected for resistive fluctuations probed nonperturbatively by the current. The low frequency noise resembles flicker-type 1/f β noise, often taking on the form of Lorentzian noise dominated by a small number of fluctuators as the volume fraction of the insulating phase dominates. Radio frequency noise intensity also quadratic in the bias current allows the identification of resistance fluctuations with lifetimes below 1 ns, approaching timescales seen in non-equilibrium pump–probe studies of the transition. We find quantitative consistency with a model for fluctuations in the percolative fraction. The thermodynamics of the MIT suggests that dominant fluctuations are ones that alter small volumes affecting the connectivity of domain boundaries. This noise serves as a sensitive and nonperturbative probe for the dynamics of switching phenomena in this system.
36 MATERIALS SCIENCE↗
Learning-based approach to plasticity in athermal sheared amorphous packings: Improving softness
The plasticity of amorphous solids undergoing shear is characterized by quasi-localized rearrangements of particles. While many models of plasticity exist, the precise relationship between the plastic dynamics and the structure of a particle’s local environment remains an open question. Previously, machine learning was used to identify a structural predictor of rearrangements called “softness.” Although softness has been shown to predict which particles will rearrange with high accuracy, the method can be difficult to implement in experiments where data are limited and the combinations of descriptors it identifies are often difficult to interpret physically. Here, we address both of these weaknesses, presenting two major improvements to the standard softness method. First, we present a natural representation of each particle’s observed mobility, allowing for the use of statistical models that are both simpler and provide greater accuracy in limited datasets. Second, we employ persistent homology as a systematic means of identifying simple, topologically informed, structural quantities that are easy to interpret and measure experimentally. We test our methods on two-dimensional athermal packings of soft spheres under quasi-static shear. We find that the same structural information that predicts small variations in the response is also predictive of where plastic events will localize. We also find that an excellent accuracy is achieved in athermal sheared packings using simply a particle’s species and the number of nearest neighbor contacts.
36 MATERIALS SCIENCE↗
Excitation of fishbone-like mode in tokamaks due to bounce resonances of trapped thermal ions
When the drift kinetic effect of thermal ions is taken into account, a high-frequency fishbone-like mode (FLM) is found to be driven unstable by trapped thermal ions (TTIs) in tokamak plasmas, according to self-consistent magneto-hydrodynamic (MHD)-kinetic hybrid modeling utilizing the MARS-K code [Liu et al., Phys. Plasmas 15, 112503 (2008)] as well as an analytic theory. It is found that, similar to energetic particles, TTIs can also stabilize the internal kink mode, whereas the FLM is excited when the effective beta of TTIs exceeds a threshold value. The real frequency of the FLM is comparable to the bounce frequency of TTIs. The mode structure of the FLM can be significantly different from the conventional step-like function for the associated plasma radial displacement. This drift kinetic induced modification of the mode structure near the q = 1 surface is captured by non-perturbative MHD-kinetic hybrid computations with MARS-K. Furthermore, the FLM can only be triggered by TTIs at sufficiently high thermal temperatures. Both the FLM and the internal kink can be stabilized by sufficiently fast plasma toroidal rotation and parallel sound wave damping. These two conditions of high thermal temperature and (fast) flow stabilization, though making it challenging to observe the TTI-driven FLM in present day experiments, are favorable for the mode excitation in future reactor scale devices.
36 MATERIALS SCIENCE↗
The spin selectivity effect in chiral materials
We overview experiments performed on the chiral induced spin selectivity (CISS) effect using various materials and experimental configurations. Through this survey of different material systems that manifest the CISS effect, we identify several attributes that are common to all the systems. Among these are the ability to observe spin selectivity for two point contact configurations, when one of the electrodes is magnetic, and the correlation between the optical activity of the chiral systems and a material’s spin filtering properties. In addition, recent experiments show that spin selectivity does not require pure coherent charge transport and the electron spin polarization persists over hundreds of nanometers in an ordered medium. Finally, we point to several issues that still have to be explored regarding the CISS mechanism. Among them is the role of phonons and electron–electron interactions.
36 MATERIALS SCIENCE↗
Magnetism in curved geometries
Curvature impacts physical properties across multiple length scales, ranging from the macroscopic scale, where the shape and size vary drastically with the curvature, to the nanoscale at interfaces and inhomogeneities in materials with structural, chemical, electronic, and magnetic short-range order. In quantum materials, where correlations, entanglement, and topology dominate, the curvature opens the path to novel characteristics and phenomena that have recently emerged and could have a dramatic impact on future fundamental and applied studies of materials. Particularly, magnetic systems hosting non-collinear and topological states and 3D magnetic nanostructures strongly benefit from treating curvature as a new design parameter to explore prospective applications in the magnetic field and stress sensing, microrobotics, and information processing and storage. This Perspective gives an overview of recent progress in synthesis, theory, and characterization studies and discusses future directions, challenges, and application potential of the harnessing curvature for 3D nanomagnetism.
71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗