Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Phase transformations”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,333 records · Page 74
All sourcesNASA NTRSDOE OSTI
DOE OSTI2026

Compression rate effects on the Bi-III stability field in dynamic diamond anvil cell XFEL studies of bismuth

This study aims to resolve conflicting observations of bismuth’s high-pressure phase transitions across static, intermediate, and shock compression regimes. We probed its high-pressure structural sequence using the dynamic diamond anvil cell with and time-resolved X-ray diffraction with microsecond resolution at an X-ray free-electron laser. At room temperature and pressures up to 20 gigapascals, bismuth evolves through the same structural sequence previously identified under static compression. However, the transformation behavior differs in important ways under dynamic loading. In particular, the transition from the incommensurate intermediate-pressure phase to the high symmetry high pressure phase begins at pressures about 2 to 4 gigapascals lower than in static experiments, and the onset of this transformation depends on the compression rate. As a result, the stability field of the intermediate-pressure phase is reduced under rapid compression. Our results suggest that at sufficiently fast loading rates the intermediate phase may be bypassed entirely, consistent with previous shock-compression observations.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2020

Phase-curve Pollution of Exoplanet Transit Depths

The next generation of space telescopes will enable transformative science to understand the nature and origin of exoplanets. In particular, transit spectroscopy will reveal the chemical composition of the exoplanet atmospheres with unprecedented detail thanks to precise measurements of the visible-to-infrared transit depths down to 10 parts per million. Such a level of instrumental precision raises the challenge to obtain even more precise astrophysical models so as not to significantly influence the interpretation of the observed data. We must therefore critically revisit some of the commonly accepted assumptions that were adequate for analyzing past and current observations. A common approximation in the analysis of exoplanetary primary transits is that the planet does not contribute to the recorded flux, so-called dark planet hypothesis. In this paper, we investigate the impact of the dark planet hypothesis on the parameters obtained from the analysis of transits with particular attention to the transit depth. We develop mathematical formulae and release new software to estimate the magnitude of the potential bias. These tools will be useful in the preparation of observing proposals, as well as within the scientific consortia of the James Webb Space Telescope (JWST) and the Atmospheric Remote-sensing Infrared Exoplanet Large-survey (ARIEL) missions. We probe the accuracy of the mathematical formulae through the analysis of synthetic observations with the JWST Mid-InfraRed Instrument. We find that self-blending from nightside emission attenuates the transit depth by >3σ for some of the known exoplanet systems, in agreement with previous work. An additional unreported effect caused by the nightside rotating into view can also impart a significant effect, but in the opposite direction (increasing the transit depth); this effect can largely be removed with conventional detrending practices, at the expense of a slight increase in noise, and mixing astrophysical variations and instrumental drifts.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2024

Hierarchical Phased-Array Antennas Coupled to Al KIDs: A Scalable Architecture for Multi-band Millimeter/Submillimeter Focal Planes

We present the optical characterization of two-scale hierarchical phased-array antenna kinetic inductance detectors (KIDs) for millimeter/submillimeter wavelengths. Our KIDs have a lumped-element architecture with parallel plate capacitors and aluminum inductors. The incoming light is received with a hierarchical phased array of slot dipole antennas, split into 4 frequency bands (between 125 GHz and 365 GHz) with on-chip lumped-element band-pass filters, and routed to different KIDs using microstriplines. Individual pixels detect light for the 3 higher-frequency bands (190–365 GHz), and the signals from four individual pixels are coherently summed to create a larger pixel detecting light for the lowest frequency band (125–175 GHz). The spectral response of the band-pass filters was measured using Fourier transform spectroscopy (FTS), the far-field beam pattern of the phased-array antennas was obtained using an infrared source mounted on a 2-axis translating stage, and the optical efficiency of the KIDs was characterized by observing loads at 294 K and 77 K. We report on the results of these three measurements.

47 OTHER INSTRUMENTATION↗
DOE OSTI2020

Scheme for stabilising the phase and arrival time of ultrashort laser pulses in a coherent beam combining fibre system

An algorithm has been demonstrated for simultaneously measuring the phase and arrival time of optical pulses relative to pulses in a reference channel using one detector array. Based on this algorithm, a simple optoelectronic pulse phase and arrival time stabilisation scheme has been designed for operation in a coherent beam combining fibre system for ultrashort pulses (including chirped ones). We have studied the performance of the stabilisation scheme. In particular, we have reached a phase measurement rate of 25 000 cps, demonstrated an ∼ 2 kHz limiting phase stabilisation frequency in a feedback loop, and obtained an arrival time measurement accuracy of ∼ 5 % of the transform-limited pulse duration at a measurement rate of 5 cps. In experiments concerned with coherent beam combining for two channels of a pulsed fibre system at a wavelength of 1030 nm, we have demonstrated phase stabilisation with an accuracy better than λ/100 and delay setting accuracy of 10 fs at a transform-limited pulse duration of ∼ 200 fs and obtained 94 % beam combining efficiency. (paper)

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2025

Atomic-Scale Tracking of Topological Defect Motion and Incommensurate Charge Order Melting

Charge order pervades the phase diagrams of quantum materials where it competes with superconducting and magnetic phases, hosts electronic phase transitions and topological defects, and couples to the lattice generating intricate structural distortions. Incommensurate charge order is readily stabilized in manganese oxides, where it is associated with anomalous electronic and magnetic properties, but its nanoscale structural inhomogeneity complicates precise characterization and understanding of its relationship with competing phases. Leveraging atomic-resolution variable-temperature cryogenic scanning transmission electron microscopy, we characterize the thermal evolution of charge order as it transforms from its ground state in a model manganite system. We find that mobile networks of discommensurations and dislocations generate phase inhomogeneity and induce global incommensurability in an otherwise lattice-locked modulation. Driving the order to melt at high temperatures, the discommensuration density grows, and regions of order locally decouple from the lattice periodicity. Published by the American Physical Society 2025

Schnitzer, Noah (ORCID:0000000210421146)↗
DOE OSTI2020

Mineralogical transformations in polymetallic nodules and the change of Ni, Cu and Co crystal-chemistry upon burial in sediments

Polymetallic nodules from the Clarion and Clipperton Zone of the equatorial Pacific Ocean were studied using X-ray diffraction, X-ray absorption, Fourier-transformed infrared spectroscopy and transmission electron microscopy. Here, this study includes nodules found at the sediment surface as well as subsurface (14–16 cm sediment depth) and deeply buried (530–985 cm sediment depth) nodules. The surface and subsurface nodules are currently under oxic conditions whereas the deeply buried nodules are under suboxic conditions. Surface nodules consist mainly of turbostratic phyllomanganates (7 Å and 10 Å vernadite and Fe-vernadite); todorokite is a minor phase, if present at all. In contrast, subsurface and especially deeply buried nodules predominantly consist of todorokite, which increases in abundance with depth in the sediment. Thus, upon burial of nodules within the shallow sediment, phyllomanganates transform to todorokite, probably through the combined action of time and change in the ambient chemical conditions. Nodules from deeper sediment depth (>500 cm) consist primarily of todorokite and additionally show signs of dissolution. The transformation of phyllomanganates to todorokite and their further dissolution upon nodule burial under suboxic conditions induces modifications in the crystal-chemistry of Ni, Co, and Cu. In surface nodules, Ni and Co are incorporated in the octahedral sheets of phyllomanganates, whereas Cu mainly is located at the edges of those phyllomanganate sheets. In buried nodules Cu and to a lesser extent Ni are incorporated in todorokite by forming outer-sphere complexes within the tunnels. However, Ni is predominantly incorporated within the octahedra of the newly formed todorokite structure. Co is also enriched in the octahedra of todorokite as a result of dissolution of hydrogenetic vernadite and re-incorporation in the more stable Mn-phase formed during the diagenetic transformation. Co enrichment under suboxic conditions after burial within the sediments is noteworthy since Co in surface nodules is characteristic for oxic conditions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Competing Interactions between Mesoscale Length-Scales, Order-Disorder, and Martensitic Transformation in Ferromagnetic Shape Memory Alloys

In the present study, the effects of composition and heat treatments and the resulting microstructural changes on the martensitic transformation and ferromagnetic transition have been investigated in NiCoMnIn metamagnetic shape memory alloys. In this shape memory alloy system, it is observed that upon heat treatments at a wide temperature range, the onset temperature of the martensitic transformation follows a non-monotonic behavior with respect to heat treatment time, and the nature of the non-monotonic behavior is also a function of composition. This behavior cannot be attributed to well-known factors such as precipitation, change in local composition due to the precipitation and/or global degree of order. In this work, a systematic investigation through synthesis, thermal processing and characterization via thermo-physical measurements, transmission electron microscopy and in-situ synchrotron x-ray diffraction experiments has been used to correlate the non-monotonic dependence of the martensitic transformation and ferromagnetic transition temperatures to the evolution of L2 1 domains arising from a order/disorder phase transition. A thermodynamic model for the magneto-structural transition is combined with classical nucleation theory to further ascertain the role of microstructural length-scales on the onset of the martensitic transformation. This work thus provides understanding of the thermodynamic and kinetic factors that can be controlled to tune the coupled magneto-structural transformations in NiCoMnIn metamagnetic shape memory alloys.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Visualizing interfacial collective reaction behaviour of Li–S batteries

Benefiting from high energy density (2,600 Wh kg -1 )) and low cost, lithium-sulfur (Li-S) batteries are considered promising candidates for advanced energy-storage systems. Despite tremendous efforts in suppressing the long-standing shuttle effect of lithium polysulfides, understanding of the interfacial reactions of lithium polysulfides at the nanoscale remains elusive. This is mainly because of the limitations of in situ characterization tools in tracing the liquid-solid conversion of unstable lithium polysulfides at high temporal-spatial resolution. There is an urgent need to understand the coupled phenomena inside Li-S batteries, specifically, the dynamic distribution, aggregation, deposition and dissolution of lithium polysulfides. Here, by using in situ liquid-cell electrochemical transmission electron microscopy, we directly visualized the transformation of lithium polysulfides over electrode surfaces at the atomic scale. Notably, an unexpected gathering-induced collective charge transfer of lithium polysulfides was captured on the nanocluster active-centre-immobilized surface. It further induced an instantaneous deposition of nonequilibrium Li2S nanocrystals from the dense liquid phase of lithium polysulfides. Without mediation of active centres, the reactions followed a classical single-molecule pathway, lithium polysulfides transforming into Li 2 S 2 and Li 2 S step by step. Molecular dynamics simulations indicated that the long-range electrostatic interaction between active centres and lithium polysulfides promoted the formation of a dense phase consisting of Li + and S n 2- (2 < n ≤ 6), and the collective charge transfer in the dense phase was further verified by ab initio molecular dynamics simulations. Finally, the collective interfacial reaction pathway unveils a new transformation mechanism and deepens the fundamental understanding of Li-S batteries.

25 ENERGY STORAGE↗
DOE OSTI2025

Characterization of fluorite-structured ferroelectrics using transmission electron microscopy: Techniques, challenges, and recent advances

Fluorite-structured ferroelectrics, such as hafnium oxide and its alloyed variants, are key candidates for next-generation memory devices. Yet, fundamental questions about switching mechanisms, domain dynamics, and phase evolution remain open. Transmission electron microscopy (TEM) provides unique capabilities to address these challenges by simultaneously resolving the positions of anions and cations, chemical variations, and structural transformations. Recent advances—including in situ heating, electron beam-induced switching, electron energy loss spectroscopy, and differential phase contrast imaging—have revealed critical insights into phase transitions, potential switching pathways, and oxygen vacancy behavior. However, experimental barriers such as TEM sample-preparation-induced artifacts, high coercive fields, and imaging constraints persist, especially for polycrystalline films. By offering a focused overview of current TEM developments in fluorite ferroelectrics, this work outlines how TEM contributes to understanding key phenomena and proposes a roadmap for future studies.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Gas-phase surface modification to control catalyst structure and yields in methane dehydroaromatization

Methane dehydroaromatization (MDA) is a promising approach for direct methane transformation to aromatics and hydrogen. The benchmark catalyst Mo/H-ZSM-5 struggles to find commercial adoption because of thermodynamically-limited yields and rapid coking on Brønsted acid and molybdenum carbide species, especially on zeolite external surfaces. Here, gas-phase atomic layer deposition (ALD) overcoats H-ZSM-5 external surfaces with SiO 2 or Al 2 O 3 . NH 3 -TPD, HRTEM, and textural properties show that these overcoats exclusively passivate zeolite external surfaces. Under MDA conditions, SiO 2 gives softer coke and increases cumulative benzene yields by 25%, while Al 2 O 3 strongly decreases yields. H 2 -TPR and UV-visible and Raman spectroscopy show how the overcoats redisperse the MoO x precatalysts, especially over multiple deactivation and isothermal oxidative regeneration cycles. Combined with 27 Al-MAS NMR, MoO x redistribution and dealumination are seen as the causes of long-term deactivation over multiple regeneration cycles, and this process continues to occur regardless of the overcoat. Altogether, the deposition of a small amount of silica on the outer surface of Mo/H-ZSM-5 reduces the formation of hard coke, which could be regenerated by milder methods such as hydrogen treatment.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Phase diagrams of single-layer two-dimensional transition metal dichalcogenides: Landau theory

We report single layer (SL) two-dimensional transition metal dichalcogenides (TMDs), such as MoS 2 , ReS 2 , WSe 2 , and MoTe 2 have now become the focus of intensive fundamental and applied research due to their intriguing and tunable physical properties. These materials exhibit a broad range of structural phases that can be induced via elastic strain, chemical doping, and electrostatic field effect. These transformations, in turn, can open and close the band gap of SL-TMDs, leading to metal-insulator transitions, and lead to emergence of more complex quantum phenomena. These considerations necessitate detailed understanding of the mesoscopic mechanisms of these structural phase transitions. Here we develop a Landau-type thermodynamic description of SL-TMDs on a sample of the SL-(MoS 2 ) 1-x -(ReS 2 ) x system and analyze the free energy surfaces, phase diagrams, and order parameter behavior. Our results predict the existence of multiple structural phases with two-, six- and 12-fold degenerated energy minima for in-plane and out-of-plane order parameters. This analysis suggests that out-of-plane ferroelectricity can exist in many of these phases, with the switchable polarization being proportional to the out-of-plane order parameter. We further predict that the domain walls in SL-(MoS 2 ) 1-x -(ReS 2 ) x should become conductive above a certain strain threshold.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2023

Influence of Molybdenum on Rapid Solidification Microstructure and Microsegregation in Primary Ferrite Solidified Stainless Steel

Due to the widespread use and familiarity of austenitic stainless steels in many industries these alloys are often the first materials used when adapting new processing techniques. The rapid cooling and solidification rates that occur during fusion based additive manufacturing processes like powder bed fusion cause a fundamental shift in the solidification behavior of the material. While the effects that Cr and Ni have on the microstructure have been fairly well documented across a range of solidification conditions, the impact of alloying elements like Mo are not as well understood at rapid solidification rates. For this study, four custom stainless steel alloy feedstocks were made with targeted modification of the Cr and Mo concentrations to maintain a constant Cr/Ni eq ratio of ~1.7. Two-piston splat quenching was used to produce rapidly solidified samples and the solidification mode, phase, and cell size were investigated. Solidification rates were estimated to be between 0.4 and 1.5m/s. A comparison of the microsegregation and partitioning behavior of Cr, Ni and Mo in ferrite solidified material was also performed for the different alloy compositions. Variations of the Mo concentration between each feedstock showed no measurable influence on the solidification/cooling rates, solidification morphology, or the partitioning of Mo. Furthermore, higher concentrations of Mo were found to significantly increase the amount of ferrite phase in the microstructure by suppressing the ferrite to austenite massive transformation.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Engineering metal-oxide interface by depositing ZrO 2 overcoating on Ni/Al 2 O 3 for dry reforming of methane

Zirconium oxide (ZrO 2 ) was deposited onto Ni/Al 2 O 3 catalyst as overcoating by atomic layer deposition (ALD) for dry reforming of methane (DRM). High-temperature heating during H-2-reduction could transform the ALD-prepared ZrO 2 thin film to tetragonal phase and crack the encapsulating layer on Ni sites, which constructed a beneficial Ni-ZrO x interface. Here, interfacial surface oxygen vacancies on ZrO 2 overcoating were induced by the partial reduction of ZrO 2 surface during high-temperature H 2 reduction, with the assistance of Ni. During DRM, the interfacial oxygen vacancies enhanced CO 2 activation by dissociating CO 2 and releasing active O, thereby limiting carbon formation. For DRM at 700 °C and 800 °C, Ni/Al 2 O 3 with 5 cycles of ZrO 2 ALD overcoating enhanced both activity and stability significantly. For a 100-h DRM test at 600 °C, no deactivation was observed for the Ni/Al 2 O 3 catalyst with 10 cycles of ZrO 2 ALD overcoating, as compared to 59% relative activity loss of Ni/Al 2 O 3 .

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Structural and magnetic properties of hard magnetic system Ce(Co 1 -Fe ) 4.4 Cu 0.6 (0 ≤ x ≤ 0.19)

The Ce(Co 1 -Fe ) 4.4 Cu 0.6 (0 ≤ x ≤ 0.19) is a composite, hard magnetic system that is based on the CaCu 5 -type structure (1:5). It shows both, unique magnetic and microstructural features that are essential for permanent magnets, e.g., exceptional squareness of the 2nd. quadrant of the magnetization loops and microstructural features typically needed for pinning. Samples solidified in alumina crucibles are coarse-grained and often clearly faceted and readily align in a magnetic field. X-ray, SEM, and TEM analyses show a 1:5-type single-phase material when quenched from high temperature, which, after heat treatment, transforms into a laminar coherent nanostructure through the formation of a dense array of extended intercalated regions. Furthermore, these extended intercalated regions are comprised of segments of the Ce 2 Ni 7 –type structure (2:7) which segregate into various closely related precipitates forming a nanostructure similar to the SmCo 5 - Sm 2 Co 17 composites seen in Sm-Co permanent magnets. Based on TEM and Lorentz microscopy of well-aligned single grain particles, the magnetic domains’ reversal mechanism is regulated by anisotropy fluctuations occurring along the easy direction of magnetization and strong exchange interactions between the matrix and defects (e.g.: stacking faults). Lorentz microscopy suggests the domain wall is not physically pinned by the defect, but rather is offset/deflected when it interacts with the defect. The Lorentz and magnetization data suggest that defects cause a bending of the moment away from the c axis inside the grains.

36 MATERIALS SCIENCE↗
DOE OSTI2020

NOx speciation from copper dissolution in nitric acid/water solutions using FTIR spectroscopy

The speciation of NO 2 , NO, and N 2 O gases formed from the dissolution of copper in nitric acid is measured and characterized using Fourier-transform infrared (FTIR) spectroscopy. This study describes analysis of the gas phase species formed and ingrowths of their concentrations as a function of time. Acid concentrations range from 14 to 4 M and the NO 2 , NO, and N 2 O are analyzed using FTIR between 1585 and 2209 wavenumbers. The concentrations of the gases range from 0 to 230 ppm and change over time and as a function of acid concentration.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Friction stir processing on a strontium modified, thin-wall, vacuum-assisted high-pressure die-cast Aural-5 alloy to improve tensile and fatigue performance

Here, this study explores the application of friction stir processing (FSP) to enhance the material properties of Sr-modified Aural-5 alloy, with a focus on improved tensile and fatigue properties. Aural-5 is a well-known vacuum-assisted high-pressure die-cast (HPDC) Al-Si7-Mg alloy used in the automotive industry to reduce vehicle weight, enhance fuel efficiency, and lower carbon emissions. This alloy modifies its material chemistry with Sr for fine fibrous networks of eutectic silicon and manganese (Mn) to reduce die soldering. It has significantly less iron (Fe) content resulting in the elimination of detrimental needle-shaped Fe-bearing ß-phase intermetallic and improving ductility. The initial microstructure of as-received HPDC Aural-5 exhibits shrinkage porosity in the middle section, a dendritic microstructure with fibrous Al-Si eutectic colonies, a shear-band structure beneath the die-wall, large dendritic externally solidified crystals (ESCs), needle-shaped Mg 2 Si phase and significant second-phase particulates. Some of those microstructural features, such as porosity, ESCs, needle-shaped Mg 2 Si phase, and large second-phase particles, serve as initiation sites for cracks under mechanical loading, resulting in adverse effects on tensile properties, particularly ductility. FSP effectively transforms the microstructure into a wrought configuration with uniform particle distribution by eliminating porosity and disintegrating dendrites, eutectic colonies, ESCs, second-phase particles, and shear-band structures. FSP-driven microstructure modification enhances yield strength and tensile ductility by ~30% and ~35%, respectively. The fatigue life of the material in a bending mode configuration (stress ratio R = 0.1) after FSP exhibits enhancements ranging from 2.0 to 3.9 times that of the original HPDC Aural-5 alloy, depending on the applied stress level.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Diffusion-Limited Kinetics of Isovalent Cation Exchange in III–V Nanocrystals Dispersed in Molten Salt Reaction Media

The goal of this work is to determine the kinetic factors that govern isovalent cation exchange in III–V colloidal quantum dots using molten salts as the solvent and cation source. We focus on the reactions of InP + GaI 3 → In 1 – x Ga x P and InAs + GaI 3 → In 1–x Ga x As to create technologically important ternary III–V phases. We find that the molten salt reaction medium causes the transformation of nearly spherical InP nanocrystals to tetrahedron-shaped In 1–x Ga x P nanocrystals. Furthermore, we determine that the activation energy for the cation exchange reaction is 0.9 eV for incorporation of Ga into InP and 1.2 eV for incorporation of Ga into InAs, both much lower than the measured values in bulk semiconductors. Next, we use powder XRD simulations to constrain our understanding of the structure of the In 1–x Ga x P nanocrystals. Together our results reveal several important features of molten salt-mediated cation exchange and provide guidance for future development of these materials.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Pressure-induced transformation of Nb 2 O 5 under shock compression from first principles

Ab initio molecular dynamics (AIMD) simulations were carried out to investigate the equation of state of Nb 2 O 5 and its pressure-density relationship under shock conditions. Here, the focus of this study is on the monoclinic B-Nb 2 O 5 (C2/c) polymorph. Enthalpy calculations from AIMD trajectories at 300 K show that the pressure-induced transformation between the thermody-namically most stable crystalline monoclinic parent phase H-Nb 2 O 5 (P2/m) and B-Nb 2 O 5 occurs at ~1.9 GPa. This H→B transition is energetically more favorable than the H→L(Pmm2) pressure-induced transition recently observed at ~5.9-9.0 GPa. The predicted shock properties of Nb 2 O 5 polymorphs are also compared to their Nb and NbO 2 counterparts to assess the impact of niobium oxidation on shock response.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗