Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “PT”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,333 records · Page 74

Elucidating the degradation mechanisms of Pt-free anode anion-exchange membrane fuel cells after durability testing

The development of anion-exchange membrane fuel cells (AEMFCs) has recently accelerated due to synergistic improvements yielding highly conductive membranes, stable ionomers, and enhanced alkaline electrocatalysts. However, cell durability, especially under realistic conditions, still poses a major challenge. Herein, we employ low-loadings of Pt-free Pd-based catalysts in the anode of AEMFCs and elucidate potential degradation mechanisms impacting long-term performance under conditions analogous to the real-world (high current density, H 2 –air (albeit CO 2 -free), and intermittent operation). Our high-performing AEMFCs achieve impressive performance with power densities approaching 1 W cm —2 and current densities up to 3.5 A cm —2 . Over a 200 h period of continuous operation in H 2 –air at a current density of 600 mA cm —2 , our model Pd/C–CeO 2 anode cell exhibits record stability (~30 μV h —1 degradation) compared to the literature and up to 6× better stability than our Pd/C and commercial Pt/C anode cells. Following an 8 h shutdown, the Pd/C–CeO 2 anode cell was restarted and continued for an additional 300 h with a higher degradation rate of ~600 μV h —1 . Thorough in situ evaluations and post-stability analyses provide insights into potential degradation mechanisms to be expected during extended operation under more realistic conditions and provide mitigation strategies to enable the widespread development of highly durable AEMFCs.

08 HYDROGEN↗

Enhancing the low-temperature performance of Pt-based three-way catalysts using CeO 2 (core)@ZrO 2 (shell) supports

Developing robust Pt/CeO 2 -based three-way catalysts (TWCs) with enhanced oxygen buffering capability and low-temperature activity is highly desirable. In this study, a new TWC family, Pt/(1 − x)CeO 2 (core)@xZrO 2 (shell) (where x = 0–0.5), was prepared and evaluated at degreened (DG) and hydrothermally aged (HTA) states. Incorporation of 0.1 molar concentration of ZrO 2 resulted in a decreased temperature that 50% (T 50 ) (CO: 167 °C, THCs: 218 °C, NO: 228 °C) and 90% (T 90 ) (CO: 207 °C, THCs: 237 °C, NO: 244 °C) conversions achieved over HTA 1.8 wt% Pt/0.9CeO 2 @0.1ZrO 2 compared to the HTA 1.8 wt% Pt/CeO 2 sphere (CO: T50,90 = 179, 222 °C, THCs: 234, 252 °C, NO x : 240, 260 °C). An enhanced oxygen storage capacity and oxygen release rate were observed over Pt/0.9CeO 2 @0.1ZrO 2 compared to the Pt/CeO 2 sphere. Increasing the ZrO 2 molar concentration to values greater than 0.2 resulted in increased T 50 s (224, 265 274 °C) and T 90 s (251, 289, 292 °C) for CO, THCs, and NO x , respectively, over 1.8 wt.% Pt/0.5CeO 2 @0.5ZrO 2 . Overall, this work highlights the potential of forming a ZrO 2 shell on CeO 2 spheres as a support for TWC applications.

Liu, Chih-Han [State Univ. of New York (SUNY), Buf↗

Unravelling the origin of reaction-driven aggregation and fragmentation of atomically dispersed Pt catalyst on ceria support

Metal–support interaction plays a crucial role in governing the stability and activity of atomically dispersed platinum catalysts on ceria support. The migration and aggregation of platinum atoms during the catalytic reaction leads to the redistribution of active sites. In this study, by utilizing a multimodal characterization scheme, we observed the aggregation of platinum atoms at high temperatures under reverse water gas shift reaction conditions and the subsequent fragmentation of platinum clusters, forming “single atoms” upon cooling. Theoretical simulations of both effects uncovered the roles of carbon monoxide binding on perimeter Pt sites in the clusters and hydrogen coverage in the aggregation and fragmentation mechanisms. Finally, this study highlights the complex effects of adsorbate and supports interactions with metal sites in Pt/ceria catalysts that govern their structural transformations under in situ conditions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Geometric And Electronic Structure of Methane Adsorbed on a Pt Surface

The electronic structure of methane adsorbed on Pt(977) is investigated using angle-resolved x-ray absorption spectroscopy (XAS) in combination with density functional theory spectrum calculations. XAS, which probes the unoccupied states atom specifically, shows the appearance of the symmetry-forbidden gas-phase lowest unoccupied molecular orbital due to s-p rehybridization. In addition new adsorption-induced states appear just above the Fermi level. A systematic investigation, where computed XA spectra are compared with the experiment, indicates elongation of the C-H bond pointing toward the surface to 1.18+/-0.05 Angstroms. The bond elongation arises due to mixing between bonding and antibonding C-H orbitals. Computed charge density difference plots show that no covalent chemical bond is formed between the adsorbate and substrate upon adsorption. The changes in electronic structure arise in order to minimize the Pauli repulsion by polarizing charge away from the surface toward the carbon atom of the methane molecule.

03 NATURAL GAS↗

Low- and high-order nonlinear optical properties of Au, Pt, Pd, and Ru nanoparticles

We investigate third- and higher-order nonlinear optical processes in Au, Pt, Pd, and Ru nanoparticles. We measured the nonlinear refractive indices and nonlinear absorption coefficients of the suspensions of these nanoparticles using the 792 nm femtosecond and picosecond pulses. The highest values of these parameters were observed in the case of Au nanoparticles (-8x10{sup -14} m{sup 2} W{sup -1} and 1.7x10{sup -10} m W{sup -1}), when the 210 ps pulses were used as a probe radiation. The high-order harmonic generation was studied during the propagation of the 120 fs pulses through the plasmas produced on the surfaces containing the nanoparticles. The highest harmonic cutoff (33rd order) was observed in the case of gold nanoparticle-contained plasma. These results were compared with the harmonics generating from the plasma produced on the surfaces of the bulk materials of the same origin. A two- to sixfold enhancement of harmonic yield was observed in the case of nanoparticle-contained plumes with regard to the bulk materials.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Effect of bombardment with different ions (H, He, Ar) on ordering transformation of Fe{sub 48}Pt{sub 52} films

Fe{sub 48}Pt{sub 52} thin films with a thickness of 50 nm were deposited at room temperature before undergoing glow-discharge-induced ion bombardment at 300 deg. C for 1 h. The energy of the incident ions was adjusted by applying a radio-frequency bias (V{sub b}) from 200 to 600 V. H{sub 2}, He, and Ar were used as the working gases. Significant ordering enhancement was only found in the H-ion bombarded films. The coercivity of such films is greatly increased from 0.5 kOe, for the sample without any bias, to around 8 kOe at V{sub b}=200-600 V, which result is similar to that for a film annealed at 400 deg. C in a vacuum. This result suggests that H-ion bombardment has the effect of a 100 deg. C increase in annealing temperature. Microstructural studies reveal that the average grain size of the H-ion bombarded films is about 30 nm, which is much smaller than that of 400 deg. C-annealed films. The film thickness of He-ion bombarded samples decreases linearly as V{sub b} increases because of the intensive sputtering effect. Under Ar-ion bombardment, most of the film is removed even at V{sub b}=200 V.

36 MATERIALS SCIENCE↗

Anisotropic properties in Fe-Pt thick film magnets

As-deposited Fe-Pt thick films prepared by a pulsed laser deposition method with the laser power higher than 5 W had L1{sub 0} ordered phase without a substrate heating system. As the laser power increased, the properties of the obtained films changed from isotropic to anisotropic ones. It was also confirmed that x-ray diffraction analysis agrees with the anisotropic phenomenon in crystalline structure with increasing laser power.

36 MATERIALS SCIENCE↗

The Influence of Annealing Conditions on the Growth and Structure of Embedded Pt Nanocrystals

The growth and structure of Pt nanocrystals (NCs) formed by ion implantation in a-SiO{sub 2} has been investigated as a function of the annealing conditions. Transmission electron microscopy and small-angle x-ray scattering measurements demonstrate that the annealing ambient has a significant influence on NC size. Samples annealed in either Ar, O{sub 2}, or forming gas (95% N{sub 2}: 5% H{sub 2}) at temperatures ranging from 500 C-- 1300 C form spherical NCs with mean diameters ranging from 1--14 nm. For a given temperature, annealing in Ar yields the smallest NCs. O{sub 2} and forming gas ambients produce NCs of comparable size though the latter induces H chemisorption at 1100 C and above, as verified with x-ray absorption spectroscopy. This H intake is accompanied by a bond-length expansion and increased structural disorder in NCs of diameter >3 nm.

08 HYDROGEN↗

In situ XAS studies of Pt{sub x}Pd{sub 1-x} nanoparticles under thermal annealing

In this work, we have studied Pt{sub x}Pd{sub 1-x}(x = 1, 0.7 or 0.5) nanoparticles subjected to H{sub 2} reduction and sulfidation under H{sub 2}S atmosphere, both at 300 deg. C. The system was studied by in-situ x-ray absorption spectroscopy (in-situ XAS). We observed that the efficiency of sulfidation is directly proportional to the quantity of Pd atoms in the nanoparticle, provided the reduction process has been achieved.

36 MATERIALS SCIENCE↗

SAXS Analysis of Embedded Pt Nanocrystals Irradiated with Swift Heavy Ions

Elongated Pt nanocrystals (NCs) formed in SiO{sub 2} by ion implantation, thermal annealing and swift heavy ion irradiation were analyzed by small-angle X-ray scattering (SAXS) and transmission electron microscopy (TEM) measurements. Transmission SAXS measurements were performed in samples aligned at different angles relative to the photon beam resulting in non-isotropic scattering and thus enabling the three dimensional analysis of the NCs. Selected angular sectors of the detector were integrated and analyzed separately, leading to the individual evaluation of both the major and minor dimensions of the rod-shaped NCs. This method enables the use of well established spherical models for the SAXS data analysis and yielded excellent agreement with TEM results.

36 MATERIALS SCIENCE↗

Particle-triaxial rotor calculations around {sup 195}Pt

Particle-triaxial rotor calculations have been performed for the negative parity states in {sup 195}Pt and {sup 193}Os. The doublet structure of the low-lying excited states is better described when a Woods-Saxon potential is used compared to the use of a modified harmonic oscillator potential. The predicted level energies and B(E2) transition strengths are in overall agreement with the experimental data and the U(6/12) results. The ratios of B(E2) values between the states of two doublets agree well with those obtained assuming a pseudospin symmetry. In {sup 193}Os, the model calculations can be used for clarification of the spin assignments in cases where they are ambiguous. It is interesting to check them by new precise spin determination.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Interfacial mixing and internal structure of Pt-containing nanocomposites grown by room temperature electron beam induced deposition

Material grown by room temperature electron beam induced deposition (EBID) using (CH{sub 3}){sub 3}CH{sub 3}C{sub 5}H{sub 4}Pt precursor consists of platinum nanocrystals embedded in an amorphous matrix. The crystallites are shown to intermix with the amorphous oxide on a Si substrate. The extent of intermixing scales with the electron energy density delivered to the material during growth. Dependencies on electron flux, fluence, and exposure time indicate that the intermixing process is athermal, electron-activated, and rate limited by mass transport inside the solid. Furthermore, the degree of deposit crystallinity is shown to scale with the electron flux and fluence used for EBID. We discuss mechanisms behind the observed changes in nanostructure and implications for the growth of functional materials by EBID.

36 MATERIALS SCIENCE↗

Local deposition of high-purity Pt nanostructures by combining electron beam induced deposition and atomic layer deposition

An approach for direct-write fabrication of high-purity platinum nanostructures has been developed by combining nanoscale lateral patterning by electron beam induced deposition (EBID) with area-selective deposition of high quality material by atomic layer deposition (ALD). Because virtually pure, polycrystalline Pt nanostructures are obtained, the method extends the application possibilities of EBID, whereas compared to other area-selective ALD approaches, a much higher resolution is attainable; potentially down to sub-10 nm lateral dimensions.

36 MATERIALS SCIENCE↗

The study of oxygen molecules on Pt (111) surface with high resolution x-ray photoemission spectroscopy

By using high resolution x-ray photoelectron spectroscopy, we show that inelastic scattering of photoelectron at low temperature (30-50 K) generates two kinds of oxygen species on Pt (111) surface. Intense synchrotron radiation source dissociates oxygen molecules into chemisorbed atomic oxygen and induces the formation of PtO on the surface. Estimated coverage of dissociated atomic oxygen is 0.5 ML, suggesting possible formation of p(2x1) surface structure, while PtO coverage shows saturation coverage of 0.5 ML. Molecular oxygen dosed at 30 K undergoes thermally activated transition from physisorbed to chemisorbed state at around 40 K.

36 MATERIALS SCIENCE↗

Intermediate pT phenomena in relativistic heavy-ion collisions

Particles produced with intermediate values of transverse momentum 1-2(less-or-similar sign)pT(less-or-similar sign)4-5 GeV, exhibit both thermal and jet-like features making them an ideal testing ground of the properties of the quark-gluon plasma produced in the aftermath of a relativistic heavy-ion collision, which have been only inferred from the behavior of either soft or hard modes. In this work I discuss two phenomena that that are observed in this transverse momentum window: the suppression of the single, non-photonic electron yield compared to normalized p+p collisions and the spin alignment of vector mesons. I make use of a recombination scenario of either a heavy or a fast quark with thermal ones and show that this way of describing hadron formation can account for the afore mentioned phenomena.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗