Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “PRESSURE VESSELS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,333 records · Page 74
All sourcesNASA NTRSDOE OSTI
NASA NTRS1974

Advanced-power-reactor design concepts and performance characteristics

Five reactor cooling concepts which allow continued reactor operation following a single rupture of the coolant system are presented for application with the APR. These concepts incorporate convective cooling, double containment, or heat pipes to ensure operation after a coolant line rupture. Based on an evaluation of several control system concepts, a molybdenum clad, beryllium oxide sliding reflector located outside the pressure vessel is recommended.

Davison, H. W.↗
NASA NTRS1974

Procedures for experimental measurement and theoretical analysis of large plastic deformations

Theoretical equations are derived and analytical procedures are presented for the interpretation of experimental measurements of large plastic strains in the surface of a plate. Orthogonal gage lengths established on the metal surface are measured before and after deformation. The change in orthogonality after deformation is also measured. Equations yield the principal strains, deviatoric stresses in the absence of surface friction forces, true stresses if the stress normal to the surface is known, and the orientation angle between the deformed gage line and the principal stress-strain axes. Errors in the measurement of nominal strains greater than 3 percent are within engineering accuracy. Applications suggested for this strain measurement system include the large-strain-stress analysis of impact test models, burst tests of spherical or cylindrical pressure vessels, and to augment small-strain instrumentation tests where large strains are anticipated.

Morris, R. E.↗
NASA NTRS1975

Composite reinforced propellant tanks

Design studies involving weight and cost were carried out for several structural concepts applicable to space shuttle disposable tankage. An effective design, a honeycomb stabilized pressure vessel, was chosen. A test model was designed and fabricated.

Brown, L. D.↗
NASA NTRS1975

Probing a planetary atmosphere - Pioneer Venus spacecraft description

This paper describes the four Pioneer Venus probe spacecraft which will explore the atmosphere of Venus in mid-December, 1978. The probes, one large and three small, will carry a complement of sixteen scientific instruments which will make measurements from entry (200 km-altitude) down to the planet surface. The surface environment, approximately 770 K temperature and 95 bar. pressure, leads to a design in which the equipment complement is housed in internally insulated, spherical pressure vessels. Entry deceleration and stabilization are provided by 45 deg. half-angle conical forebodies, heat protected by carbon phenolic ablative heat shields. For the large probe, a parachute provides additional retardation between 67 and 44 km altitude, a region of extreme scientific interest.

Nolte, L. J.↗
NASA NTRS1975

Extravehicular mobility unit

The Apollo extravehicular mobility unit (EMU) consisted of a highly mobile, anthropomorphic pressure vessel and a portable life support system. The EMU used for the first lunar landing is described along with the changes made in the EMU design during the program to incorporate the results of experience and to provide new capabilities. The performance of the EMU is discussed.

Maurice A. Carson↗
NASA NTRS1975

Dewar technology study

The development of a Dewar system for handling liquid helium under weightless conditions is described. Porous plug designs for the prevention of superfluid creep out of the dewar through the vent line were evaluated. For the purpose of designing a neck to provide a transition from the cold cavity to the outside, the loads carried by the neck and equipment supports were studied. Temperature, pressure, and mass flow instrumentation for monitoring Dewar performance were also evaluated. In addition, multilayer blankets consisting of aluminized Mylar separated by Dacron net sheets were designed to insulate the pressure vessel. The dewar system is suggested for use with the star tracking telescope aboard the relativity satellite.

Davis, W.↗
NASA NTRS1975

Retrieval of the HEAO-C spacecraft with Space Shuttle

A plan has been developed to retrieve the HEAO-C spacecraft from orbit with the Space Shuttle in the early 1980s. The initial HEAO-C orbit altitude must be increased to provide additional lifetime. A simple passive stabilization mode, using gravity gradient and aerodynamic torques, is used for long-term storage. Most of the modifications required for Orbiter compatibility result from manned safety requirements and the structural mounting. There is a positive disconnect of all power before entering the Orbiter bay, and pressure vessels are monitored continuously. Structural equipment is added in the Orbiter bay to receive and stow the Observatory.

Mitchell, D. H.↗
NASA NTRS1977

Lifetimes of fiber composites under sustained tensile loading

Results are presented for a study intended to summarize lifetime data on several fiber/epoxy composite materials subjected to sustained uniaxial tensile loading, to report preliminary results of an accelerated test method for predicting the life of simple composites, and to describe related work in progress on pressure vessels and other filament-wound structures. The lifetime performance of the tested composites was compared by plotting the percent of ultimate strength (applied fiber stress normalized with respect to fiber failure stress in a composite) versus lifetime. In terms of performance in long-term tensile applications, the tested composites are ranked in the following order: graphite/epoxy, Be wire/epoxy, Aramid/epoxy, and S-glass/epoxy. The accelerated test using temperature and stress to simulate the passage of time proves to be encouraging, at least in the case of the Aramid/epoxy composite. The potential of a statistical analysis based on Weibull distribution analyses or a power law relationship is demonstrated.

Chiao, T. T.↗
NASA NTRS1978

Dual relief-valve system

System allows removal and recertification of pressure-relief valve without compromising safety requirements or depressurizing pressure vessels.

Karns, J. R.↗
NASA NTRS1979

Detecting overpenetration of electron-beam welds

Gold plate beneath weldment reveals areas of excess penetration during X-ray inspection. Technique is applicable to critical electron-beam welds, such as those in gas turbines and pressure vessels.

Macfarlane, D. I.↗
NASA NTRS1978

Analysis and Test of Deep Flaws in Thin Sheets of Aluminum and Titanium. Volume 1: Program Summary and Data Analysis

Six thicknesses of 2219-T87 aluminum base metal surface flaw and center crack specimens ranging from 9.53 to 0.635 mm (0.375 to 0.025 inch) were tested at temperatures ranging from 295K to 20K. Additionally, 6A1-4V STA titanium base metal specimens were tested in three thicknesses 3.18, 2.03, and 1.02 mm (0.125, 0.080 and 0.040 inch) at room temperature. All tests were conducted on uniaxial specimens. Results were analyzed and compared with previously developed data to establish a criterion for proof testing thin walled pressure vessels. The data analysis and exact flaw size dimensions are presented.

Finger, R. W.↗
NASA NTRS1978

Development of a cryogenic rotating heat pipe joint

The performance of two critical technology components required for a continuously rotatable heat pipe: (1) a low-leakage rotatable coupling for the heat pipe pressure vessel, and (2) a rotatable internal wick, is reported. Performance and leakage requirements were established based on 12 months operation of a cryogenic rotatable heat pipe on a satellite in earth orbit.

Source record↗
NASA NTRS1977

Space Shuttle's orbital environment

Variations with the solar cycle of chemical composition, density and temperature of the orbital environment of the Space Shuttle are reviewed; micrometeoroid fluxes, ionizing radiation, photon fluxes and cosmic ray bombardment to which the Shuttle will be subjected are also mentioned. In addition, gases arising from offgassing and outgassing of contaminants (at about 300 K) from the Shuttle are considered, and particulates ejected during rocket firings or from the leakage of pressurized vessels (i.e., the cabin) are taken into account.

Witteborn, F. C.↗
NASA NTRS1977

Evaluation of flawed composite structure under static and cyclic loading

This paper presents the results of a program investigating the effects of initial defects on the fatigue and fracture response of composite laminates. The structural laminates investigated were a typical angle-ply laminate, a polar/hoop-wound pressure vessel laminate, and a typical engine fan blade laminate. Defects investigated were full- and half-penetration circular holes, full- and half-penetration slits, and countersink holes. Results are presented showing the effects of the defect size and type on the static fracture strength, fatigue performance, and residual static strength. The results of inspection procedures are shown, describing the effect of cyclic and static loadings on damage propagation in composite laminates. The data in this study were used to define proof test levels as a qualification procedure in composite structure subjected to cyclic loading.

Porter, T. R.↗
NASA NTRS1978

Hydrogen attack - Influence of hydrogen sulfide

An experimental study is conducted on 12.5-mm-thick SAE 1020 steel (plain carbon steel) plate to assess hydrogen attack at room temperature after specimen exposure at 525 C to hydrogen and a blend of hydrogen sulfide and hydrogen at a pressure of 3.5 MN/sq m for exposure times up to 240 hr. The results are discussed in terms of tensile properties, fissure formation, and surface scales. It is shown that hydrogen attack from a high-purity hydrogen environment is severe, with the formation of numerous methane fissures and bubbles along with a significant reduction in the room-temperature tensile yield and ultimate strengths. However, no hydrogen attack is observed in the hydrogen/hydrogen sulfide blend environment, i.e. no fissure or bubble formation occurred and the room-temperature tensile properties remained unchanged. It is suggested that the observed porous discontinuous scale of FeS acts as a barrier to hydrogen entry, thus reducing its effective equilibrium solubility in the iron lattice. Therefore, hydrogen attack should not occur in pressure-vessel steels used in many coal gasification processes.

Eliezer, D.↗
NASA NTRS1980

Heated tool for autoclaves

Components made of composite materials are heated in autoclaves by employing electrical resistance heating blankets, thus avoiding need to heat entire autoclave volume. Method provides not only significant energy savings compared to heating entire pressure vessel but offers time savings in accelerated heat-up and cool-down cycles.

Serafini, T. T.↗
NASA NTRS1978

Heat and moisture flow in concrete as a function of temperature

Due to temperature, reactors in operation cause heat and moisture flows in the thick walled prestressed pressure vessels. These flows were studied in three beams of concrete made with crushed limestone aggregate, and in three beams made of crushed gravel/sand aggregate. The flow phenomena were related to the structural development of the concrete by determining the amount of non-evaporatable water, the total porosity, and the pore size distribution. Local temperature and moisture conditions also influenced the technical properties. Compressive strength, changes in length due to shrinkage and contraction, thermal expansion, and thermal conductivity were determined.

Hundt, J.↗