Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “PRESSES”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,333 records · Page 74

Use of a multichannel collimator for structural investigation of low-Z dense liquids in a diamond anvil cell: Validation on fluid H{sub 2} up to 5 GPa

We report the first application of a multichannel collimator (MCC) to perform quantitative structure factor measurements of dense low-Z fluids in a diamond anvil cell (DAC) using synchrotron x-ray diffraction. The MCC design, initially developed for the Paris-Edinburgh large volume press geometry, has been modified for use with diamond anvil cells. A good selectivity of the diffracted signal of the dense fluid sample is obtained due to a large rejection of the Compton diffusion from the diamond anvils. The signal to background ratio is significantly improved. We modify previously developed analytical techniques for quantitative measurement of the structure factor of fluids in DACs [J. H. Eggert, G. Weck, P. Loubeyre, and M. Mezouar, Phys. Rev. B 65, 174105 (2002)] to account for the contribution of the MCC. We present experimental results on liquids argon and hydrogen at 296 K to validate our method and test its limits, respectively.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Pre-ignition laser ablation of nanocomposite energetic materials

Laser ignition of energetic material composites was studied for initiation with heating rates from 9.5 Multiplication-Sign 10{sup 4} to 1.7 Multiplication-Sign 10{sup 7} K/s. This is a unique heating rate regime for laser ignition studies because most studies employ either continuous wave CO{sub 2} lasers to provide thermal ignition or pulsed Nd:YAG lasers to provide shock ignition. In this study, aluminum (Al) and molybdenum trioxide (MoO{sub 3}) nanoparticle powders were pressed into consolidated pellets and ignited using a Nd:YAG laser (1064 nm wavelength) with varied pulse energy. Results show reduced ignition delay times corresponding to laser powers at the ablation threshold for the sample. Heating rate and absorption coefficient were determined from an axisymmetric heat transfer model. The model estimates absorption coefficients from 0.1 to 0.15 for consolidated pellets of Al + MoO{sub 3} at 1064 nm wavelength. Ablation resulted from fracturing caused by a rapid increase in thermal stress and slowed ignition of the pellet.

36 MATERIALS SCIENCE↗

Effect of nanostructuring on the band structure and the galvanomagnetic properties in Bi{sub 1−x}Sb{sub x} alloys

Magnetotransport measurements were performed on a series of nanostructured Bi{sub 1−x}Sb{sub x} alloy samples with an Sb content in the range between 0% and 60%. The samples were prepared by cold pressing and annealing of crystalline Bi{sub 1−x}Sb{sub x} nanoparticles, which were synthesized by mechanical alloying. The incorporation of Sb changes the band structure of these nanotextured alloys as well as their transport behavior. With increasing Sb content the band gap increases and reaches a maximum band gap of 42 meV at an Sb concentration of about 14% determined from temperature dependent resistivity measurements. For even higher Sb content, the band gap decreases again. The bands and thus the band gaps are shifted with respect to bulk material due to quantum confinement effects in the nanostructures. The change of the band structure with varying Sb content strongly affects the magnetoresistance behavior as well as the magnetic field dependence of the Hall-coefficient. Using a three band model in order to describe both properties, it was possible to determine the main band parameters of the nanostructured material as a function of the Sb content.

36 MATERIALS SCIENCE↗

Thermo-structural development of the ITER ICRF strap housing module

Since March 2010 the preliminary design of the ITER ICRF Antennas have been developed by CYCLE, a consortium consisting of IPP (Garching), CCFE (Culham), CEA (Cadarache), Politecnico di Torino (Torino) and LPPERM/KMS (Brussels). This paper describes the steps taken to develop the present geometry of the triplet pair Strap Housing Module from a thermal and structural perspective, and shows the critical areas of the structure. Key issues are the manufacturability, (achieved by HIPing - Hot Isostatic Pressing), the ability to handle the radiating plasma thermal flux of 0.35 MW/m{sup 2}, the RF losses and the neutronic radiation. HIPing is necessary to achieve the complicated system of cooling channels inside the structure, which divides the coolant equally in order to supply each strap in the triplet with 1 l/s of water. The components have also to withstand the strong mechanical forces generated by plasma disruptions affecting all internal structures and the elevated design cooling water pressure of 5MPa. In order to maximise reliability, joints between different materials in the cooling water system have been kept to a minimum. Therefore, in the interests of fabricability and availability, the whole structure is manufactured out of stainless steel (316L(N)IG). The low conductivity of 316L(N)IG demands small wall thicknesses to avoid hot spots; however this reduces the mechanical strength. Consequently an in depth FEM analysis is presented, which was used to find and to improve the critical aspects of this important component and was the best means of finding the optimum between thermal and mechanical performance.

42 ENGINEERING↗

Laser-based characterization of nuclear fuel plates

Ensuring the integrity of fuel-clad and clad-clad bonding in nuclear fuels is important for safe reactor operation and assessment of fuel performance, yet the measurement of bond strengths in actual fuels has proved challenging. The laser shockwave technique (LST) originally developed to characterize structural adhesion in composites is being employed to characterize interface strength in a new type of plate fuel being developed at Idaho National Laboratory (INL). LST is a non-contact method that uses lasers for the generation and detection of large-amplitude acoustic waves and is well suited for application to both fresh and irradiated nuclear-fuel plates. This paper will report on initial characterization results obtained from fresh fuel plates manufactured by different processes, including hot isostatic pressing, friction stir welding, and hot rolling.

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

The magnetic flywheel flow meter: Theoretical and experimental contributions

The development of contactless flow meters is an important issue for monitoring and controlling of processes in different application fields, like metallurgy, liquid metal casting, or cooling systems for nuclear reactors and transmutation machines. Shercliff described in his book “The Theory of Electromagnetic Flow Measurement, Cambridge University Press, 1962” a simple and robust device for contact-less measurements of liquid metal flow rates which is known as magnetic flywheel. The sensor consists of several permanent magnets attached on a rotatable soft iron plate. This arrangement will be placed closely to the liquid metal flow to be measured, so that the field of the permanent magnets penetrates into the fluid volume. The flywheel will be accelerated by a Lorentz force arising from the interaction between the magnetic field and the moving liquid. Steady rotation rates of the flywheel can be taken as a measure for the mean flow rate inside the fluid channel. The present paper provides a detailed theoretical description of the sensor in order to gain a better insight into the functional principle of the magnetic flywheel. Theoretical predictions are confirmed by corresponding laboratory experiments. For that purpose, a laboratory model of such a flow meter was built and tested on a GaInSn-loop under various test conditions.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Development of bulk-type all-solid-state lithium-sulfur battery using LiBH{sub 4} electrolyte

Stable battery operation of a bulk-type all-solid-state lithium-sulfur battery was demonstrated by using a LiBH{sub 4} electrolyte. The electrochemical activity of insulating elemental sulfur as the positive electrode was enhanced by the mutual dispersion of elemental sulfur and carbon in the composite powders. Subsequently, a tight interface between the sulfur-carbon composite and the LiBH{sub 4} powders was manifested only by cold-pressing owing to the highly deformable nature of the LiBH{sub 4} electrolyte. The high reducing ability of LiBH{sub 4} allows using the use of a Li negative electrode that enhances the energy density. The results demonstrate the interface modification of insulating sulfur and the architecture of an all-solid-state Li-S battery configuration with high energy density.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Thermal conductivity of vertically aligned carbon nanotube arrays: Growth conditions and tube inhomogeneity

The thermal conductivity of vertically aligned carbon nanotube arrays (VACNTAs) grown on silicon dioxide substrates via chemical vapor deposition is measured using a 3ω technique. For each sample, the VACNTA layer and substrate are pressed to a heating line at varying pressures to extract the sample's thermophysical properties. The nanotubes' structure is observed via transmission electron microscopy and Raman spectroscopy. The presence of hydrogen and water vapor in the fabrication process is tuned to observe the effect on measured thermal properties. The presence of iron catalyst particles within the individual nanotubes prevents the array from achieving the overall thermal conductivity anticipated based on reported measurements of individual nanotubes and the packing density.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Thermoelectric properties of Sn- and Pb-doped Tl{sub 9}BiTe{sub 6} and Tl{sub 9}SbTe{sub 6}

A variety of substitutions in Tl{sub 9}BiTe{sub 6} and Tl{sub 9}SbTe{sub 6} with Sn and Pb, amounting to 14 different samples, were performed by melting the stoichiometric amounts of elements at 923 K, followed by slow cooling. The pulverized powders were sintered using the hot-pressing technique. All samples were of single phase according to the powder X-ray diffraction patterns. Thermoelectric property measurements were performed to investigate the effects of Sn- and Pb-doping on the electrical conductivity, Seebeck coefficient, and thermal conductivity. Increasing the concentration of the dopants caused increases in electrical and thermal conductivity, while decreasing the Seebeck coefficient. Tl{sub 9}Bi{sub 0.90}Pb{sub 0.10}Te{sub 6} and Tl{sub 9}Bi{sub 0.85}Pb{sub 0.15}Te{sub 6} exhibited the highest power factor. The changes in lattice thermal conductivity were minor and did not follow a clear trend. Competitive ZT values were obtained for Tl{sub 9}Bi{sub 0.95}Sn{sub 0.05}Te{sub 6}, Tl{sub 9}Bi{sub 0.95}Pb{sub 0.05}Te{sub 6}, Tl{sub 9}Sb{sub 0.97}Sn{sub 0.03}Te{sub 6}, and Tl{sub 9}Sb{sub 0.95}Pb{sub 0.05}Te{sub 6}, namely 0.95, 0.94, 0.83, and 0.71 around 500 K, respectively. Higher dopant concentrations led to lower ZT values.

36 MATERIALS SCIENCE↗

Positron annihilation spectroscopy of vacancy-type defects hierarchy in submicrocrystalline nickel during annealing

Positron annihilation and X-ray diffraction analysis have been used to study submicrocrystalline nickel samples prepared by equal channel angular pressing. In the as-prepared samples the positrons are trapped at dislocation-type defects and in vacancy clusters that can include up to 5 vacancies. The study has revealed that the main positron trap centers at the annealing temperature of ΔT= 20°C-180°C are low-angle boundaries enriched by impurities. At ΔT = 180°C-360°C, the trap centers are low-angle boundaries providing the grain growth due to recrystallization in-situ.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Thermoelectric and mechanical properties on misch metal filled p-type skutterudites Mm{sub 0.9}Fe{sub 4−x}Co{sub x}Sb{sub 12}

Most of the recent work focused on improving the dimensionless figure-of-merit, ZT, of p-type skutterudites uses one or two fillers to tune the electrical and thermal properties. Considering the fact that the different fillers with varying atomic mass and ionic radii can vibrate with different amplitudes to scatter phonons of different mean free paths, we synthesized misch metal filled p-type skutterudites Mm{sub 0.9}Fe{sub 4−x}Co{sub x}Sb{sub 12} (where Mm is La{sub 0.25}Ce{sub 0.5}Pr{sub 0.05}Nd{sub 0.15}Fe{sub 0.03}, called misch metal). The samples were synthesized by hot pressing nano-powder made by ball milling the annealed ingot of Mm{sub 0.9}Fe{sub 4−x}Co{sub x}Sb{sub 12} with varying concentration of cobalt, x. By tuning the Fe/Co ratio, we achieved a thermal conductivity of ∼2 W m{sup −1} K{sup −1} at room temperature and ∼2.3 W m{sup −1} K{sup −1} at about 530 °C and a power factor of ∼30 μW cm{sup −1} K{sup −2} at about 425 °C in Mm{sub 0.9}Fe{sub 3.1}Co{sub 0.9}Sb{sub 12}, leading to a peak ZT ∼1.1 at about 425 °C. The nano-indentation experiment reveals that hardness and elastic modulus of the material is about 4.2 GPa and 116 GPa, respectively.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Improved microwave absorption and electromagnetic properties of BaFe{sub 12}O{sub 19}-poly(vinylidene fluoride) composites by incorporating reduced graphene oxides

Three-phase composites of poly(vinylidene fluoride)-BaFe{sub 12}O{sub 19}-reduced graphene oxide (PVDF–BFO-RGO) were synthesized by a facile wet chemical method and hot-pressing approach. The phase structure, topography of the hybrid materials were characterized by X-ray diffraction, scanning electron microscopy, and Raman spectra. Influence of RGO on their electromagnetic properties was investigated. Especially, improved microwave absorption and electromagnetic properties of BaFe{sub 12}O{sub 19}–PVDF composites by incorporating RGO were obtained and studied. The PVDF/BFO/RGO sample with m(RGO):m(BFO) = 5:100 shows the best microwave absorption properties with a minimum RL = −32 dB at 11 GHz and with the bandwidth less than −20 dB from 9.6 to 12.8 GHz. The composites were believed to have potential applications as the microwave absorber.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Implementation of a spark plasma sintering facility in a hermetic glovebox for compaction of toxic, radiotoxic, and air sensitive materials

Spark plasma sintering (SPS) is a rapidly developing method for densification of powders into compacts. It belongs to the so-called “field assisted sintering techniques” that enable rapid sintering at much lower temperatures than the classical approaches of pressureless sintering of green pellets or hot isostatic pressing. In this paper, we report the successful integration of a SPS device into a hermetic glovebox for the handling of highly radioactive material containing radioisotopes of U, Th, Pu, Np, and Am. The glovebox implantation has been facilitated by the replacement of the hydraulic system to apply pressure with a compact electromechanical unit. The facility has been successfully tested using UO{sub 2} powder. Pellets with 97% of the theoretical density were obtained at 1000 °C for 5 min, significantly lower than the ∼1600 °C for 5-10 h used in conventional pellet sintering.

36 MATERIALS SCIENCE↗

The mechanical properties measurement of multiwall carbon nanotube reinforced nanocrystalline aluminum matrix composite

Nanocrystalline aluminum matrix composite containing carbon nanotubes were fabricated using physical mixing method followed by cold pressing. The microstructure of the composite has been investigated using X-ray diffraction, scanning electron microscopy and energy dispersive spectroscopy techniques. These studies revealed that the carbon nanotubes were homogeneously dispersed throughout the metal matrix. The consolidated samples were pressureless sintered in inert atmosphere to further actuate a strong interface between carbon nanotubes and aluminum matrix. The nanoindentation tests carried out on considered samples showed that with the addition of 0.5 wt% carbon nanotubes, the hardness and elastic modulus of the aluminum matrix increased by 21.2 % and 2 % repectively. The scratch tests revealed a decrease in the friction coefficient of the carbon nanotubes reinforced composite due to the presence of lubricating interfacial layer. The prepared composites were promising entities to be used in the field of sporting goods, construction materials and automobile industries.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Influence of O-Co-O layer thickness on the thermal conductivity of Na{sub x}Co{sub 2}O{sub 4} studied by positron annihilation

Nominal stoichiometric Na{sub x}Co{sub 2}O{sub 4} (x = 1.0, 1.2, 1.4, 1.6, 1.8, and 2.0) polycrystals were synthesized by a solid-state reaction method. They were further pressed into pellets by the spark plasma sintering. The crystal structure and morphology of Na{sub x}Co{sub 2}O{sub 4} samples were characterized by X-ray diffraction and scanning electron microscopy measurements. Good crystallinity and layered structures were observed for all the samples. Positron annihilation measurements were performed for Na{sub x}Co{sub 2}O{sub 4} as a function of Na content. Two lifetime components are resolved. τ{sub 1} is attributed mainly to positron annihilation in the O-Co-O layers and shifts to Na layers only in the H3 phase. The second lifetime τ{sub 2} is due to positron annihilation in vacancy clusters which may exist in the Na layers or grain boundary region. The size of vacancy clusters grow larger but their concentration decreases with increasing Na content in the range of 1.0 < x < 1.8. The thickness of O-Co-O layer also shows continuous increase with increasing Na content, which is reflected by the increase of τ{sub 1}. The thermal conductivity κ, on the other hand, shows systematic decrease with increasing Na content. This suggests that the increasing spacing of O-Co-O layer could effectively reduce the thermal conductivity of Na{sub x}Co{sub 2}O{sub 4}.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

High-temperature thermoelectric properties of Hg-doped CuInTe{sub 2}

Polycrystalline samples of composition CuIn{sub 1−x}Hg{sub x}Te{sub 2} (x = 0–0.21) were synthesized from elements of 5N purity using a solid state reaction. The phase purity of the products was verified by X-ray diffraction. Samples for transport property measurements were prepared using hot-pressing. The samples were characterized by measurement of the electrical conductivity, Hall coefficient, Seebeck coefficient, and thermal conductivity over a temperature range of 300–675 K. All samples show p-type conductivity. We discuss the influence of Hg substitution on the free carrier concentration and thermoelectric performance. The investigation of the thermoelectric properties shows up to a 40% improvement of ZT in the temperature range of 300–600 K.

36 MATERIALS SCIENCE↗

Porosity and mechanical properties of zirconium ceramics

Has been studied a porous ceramics obtained from ultra-fine powders. Porous ceramic ZrO{sub 2}(MgO), ZrO{sub 2}(Y{sub 2}O{sub 3}) powder was prepared by pressing and subsequent sintering of compacts homologous temperatures ranging from 0.63 to 0.56 during the isothermal holding duration of 1 to 5 hours. The porosity of ceramic samples was from 15 to 80%. The structure of the ceramic materials produced from plasma-sprayed ZrO{sub 2} powder was represented as a system of cell and rod structure elements. Cellular structure formed by stacking hollow powder particles can be easily seen at the images of fracture surfaces of obtained ceramics. There were three types of pores in ceramics: large cellular hollow spaces, small interparticle pores which are not filled with powder particles and the smallest pores in the shells of cells. The cells generally did not have regular shapes. The size of the interior of the cells many times exceeded the thickness of the walls which was a single-layer packing of ZrO{sub 2} grains. A distinctive feature of all deformation diagrams obtained in the experiment was their nonlinearity at low deformations which was described by the parabolic law. It was shown that the observed nonlinear elasticity for low deformation on deformation diagrams is due to mechanical instability of the cellular elements in the ceramic carcass.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

The influences of mole composition of strontium (x) on properties of barium strontium titanate (Ba{sub 1−x}Sr{sub x}TiO{sub 3}) prepared by solid state reaction method

Barium Strontium Titanate (Ba{sub 1-x}Sr{sub x}TiO{sub 3}) or BST was prepared by solid state reaction method. Raw materials are BaCO{sub 3}, SrCO{sub 3}, and TiO{sub 2}. Those materials are mixed for 8 h, pressed, and sintered at temperature 1200°C for 2 h. Mole composition of Sr (x) was varied to study its influences on structural, morphological, and electrical properties of BST. Variation of (x) are x = 0; x = 0.1; and x = 0.5. XRD patterns showed a single phase of BST, which mean that mixture of raw materials was homogenous. Crystal structure was influenced by x. BaTiO{sub 3} and Ba{sub 0.9}Ti{sub 0.1}TiO{sub 3} have tetragonal crystal structure, while Ba{sub 0.5}Sr{sub 0.5}TiO{sub 3} is cubic. The diffraction angle shifted to right side (angle larger) as the increases of x. Crystalline size of BaTiO{sub 3}, Ba{sub 0.9}Sr{sub 0.1}TiO{sub 3}, and Ba{sub 0.5}Sr{sub 0.5}TiO{sub 3} are 38.13 nm; 38.62 nm; and 37.13 nm, respectively. SEM images showed that there are still of pores which were influenced by x. Ba{sub 0.9}Sr{sub 0.1}TiO{sub 3} has densest surface (pores are few and small in size). Sawyer Tower circuit showed that BaTiO{sub 3} and Ba{sub 0.9}Sr{sub 0.1} TiO{sub 3} is ferroelectric, while Ba{sub 0.5}Sr{sub 0.5}TiO{sub 3} is paraelectric. The dielectric constants of BaTiO{sub 3}, Ba{sub 0.9}Sr{sub 0.1}TiO{sub 3} and Ba{sub 0.5}Sr{sub 0.5}TiO{sub 3} at frequency of 1 KHz are 156; 196; and 83, respectively. Ba{sub 0.9}Sr{sub 0.1}TiO{sub 3} has relatively highest dielectric constant. It is considered that Ba{sub 0.9}Sr{sub 0.1}TiO{sub 3} has densest surface.

36 MATERIALS SCIENCE↗