Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Oxidation behavior”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,333 records · Page 74

Accelerated oxidation of epoxy thermosets with increased O 2 pressure

Polymer oxidation is usually accelerated with temperature, which is therefore applied in nearly every experimental approach dealing with predictive materials aging. Because of this simple approach, we may tend to neglect that the effective concentration of oxygen also acts as a rate multiplier for oxidation. Increasing the oxygen partial pressure in an aging environment accelerates oxidation, and while there is often a near proportional increase initially, the effect of additional oxygen usually transitions to a saturation level at some elevated pressure. This has been theoretically described in the general autoxidation scheme and is well recognized. However, for many materials the exact rate behavior under moderately increased oxygen concentration remains to be established. We therefore review epoxy oxidation and offer a broader overview of its behavior under increased O 2 partial pressure. Experimental data are given for a few thermoset materials demonstrating their rate behavior under O 2 partial pressure up to 4 atm, meaning approximately 20 times more than under standard atmospheric conditions. Confirmative evidence suggests that epoxy materials will reach saturation oxidation rates only at significantly higher O 2 partial pressure. In such a high-pressure regime it is theoretically possible to not only accelerate oxidation, but to transition into a condition where O 2 diffusion can be increased without further accelerating the oxidation rate. Finally, this can reduce diffusion limited oxidation effects under specific accelerated aging conditions as a combination of temperature and O 2 partial pressure.

36 MATERIALS SCIENCE↗

Fractal aggregation and disaggregation of newly formed iron( iii ) (hydr)oxide nanoparticles in the presence of natural organic matter and arsenic

Water chemistry affects the nucleation kinetics, precipitate morphology, and quantity of iron(III) (hydr)oxide nanoparticles, directly impacting the reactive surface area of geomedia and fate of associated waterborne contaminants. In this study, we utilized in situ grazing-incidence small angle X-ray scattering (GISAXS) and complementary ex situ techniques to investigate heterogeneous iron(III) (hydr)oxide nucleation on quartz in the presence of natural organic matter (NOM) and arsenate. Results indicate unique fractal aggregation behaviors in the system containing NOM and precipitating iron(III) (hydr)oxide nanoparticle. Furthermore, the coexistence of arsenic and NOM lead to the formation of two distinct particle size ranges: larger particles dominated by arsenic effects, and smaller particles dominated by NOM effects. These new findings provide important implications for understanding the nucleation, growth, and aggregation of iron(III) (hydr)oxides in aqueous systems where NOM is present, such as natural surface waters and water and wastewater treatment plants. The study also offers new insight into how these NOM-associated iron(III) (hydr)oxides can interact with aqueous contaminants such as arsenate.

Neil, Chelsea W.↗

Radiation Resistance of Fluorite-Structured Nuclear Oxides

Fluorite-structure oxides are radiation-resistant materials making them ideal candidates for uses as nuclear fuels or as inert matrices for actinide transmutation. The radiation tolerance of urania and cubic zirconia single crystals was investigated by external ion irradiation in predominating domains of electronic and nuclear stopping of bombarding particles. Damage kinetics show that the behavior of the two investigated fluorite-type oxides is almost the same: (i) at low-energy a two-stage disordering process is exhibited--first a ballistic step due to the formation of radiation-induced defects and second a crystal fragmentation induced by the formation of gas bubbles at large concentration-; (ii) at high energy a one-stage damage kinetics associated with the formation of ion tracks whose overlapping at high fluence results in the formation of nanometer-sized domains with a small disorientation.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Correlations between the interfacial chemistry and current-voltage behavior of n-GaAs/liquid junctions

Correlations between the surface chemistry of etched, (100) oriented n-GaAs electrodes and their subsequent photoelectrochemical behavior have been probed by high-resolution X-ray photoelectron spectroscopy. GaAs photoanodes were chemically treated to prepare either an oxide-free near stoichiometric surface, a surface enriched in zero-valent arsenic or a substrate-oxide terminated surface. The current-voltage (I-V) behavior of each surface type was subsequently monitored in contact with several electrolytes.

Tufts, Bruce J.↗

Nonequilibrium iron oxide formation in some low-mass post-asymptotic giant branch stars

Using experimental evidence that under highly oxidizing conditions gamma-Fe2O3 (maghemite) and Fe3O4 display refractory behavior, it is proposed that very low C/O ratios, that could be unique to evolving AGB stars, induce nonequilibrium formation of ferromagnetic iron oxide grains along with chondritic dust. The oxides are preferentially fractionated from chondritic dust in the stellar magnetic field which could account for the observed extreme iron underabundance in their photosphere. A search for the 1-2.5-micron IR absorption feature, or for diagnostic magnetite and maghemite IR absorption features, could show the validity of the model proposed.

Rietmeijer, Frans J. M.↗

Using interfaces to: create strongly-coupled magnetic-ferroelectrics

Starting at the level of electrons and atoms our long-term goal is to rationally design complex oxide heterostructures and interface-materials with targeted emergent behaviors. This is not a matter of simply optimizing material parameters, but rather begins with understanding a mechanism to control the interplay between the diverse microscopic degrees of freedom prevalent in complex oxides in order to create targeted macroscopic phenomena and ends with the design of new material realizations. These realizations are in turn created with atomic-layer precision, structurally assessed to see that they are the intended realization, and finally their relevant properties are measured. During this program we have developed the scientific ideas necessary to apply this materials-by-design paradigm to the creation of materials offering electrical control of magnetism. At the heart of our approach lies a partnership between theory, synthesis, and characterization. These are the areas of expertise of the three co-PIs, who have worked closely together since their arrival at Cornell. During this project bold ideas on where to put the atoms to provide electrical control of magnetism were met with the latest methods of synthesis science and electron microscopy in an attempt create targeted new multiferroics. Our work applying this materials-by-design methodology to multiferroics has enjoyed multiple successes. The Co-PIs have invented new mechanisms for multiferroics, which provide strong coupling between polarization and magnetism, and reduced them to practice. Specifically, we pioneered multiferroics based on spin-phonon coupling, rotation-driven multiferroicity, and novel geometric multiferroics. Importantly, the latter two of these mechanisms enable the deterministic switching of magnetism by an applied electric field, which is key to the application of multiferroics to future device technologies. Most recently, we performed detailed theoretical analysis on a system involving the combination of magnetoelectric and colossal magnetoresistance behaviors and predict that electrical control of a metal-insulator transition is possible in appropriately strained SmBaMn2O6. The research enabled by this grant led to 63 publications in leading refereed journals including Nature, Nature Materials, Physical Review Letters, and Advanced Materials demonstrating a materials-by-design paradigm to the creation of materials offering electrical control of magnetism.

36 MATERIALS SCIENCE↗

Engulfment Behavior of Inclusions in High-Carbon Steel: Theoretical and Experimental Investigation

Previous studies on inclusions behavior at the front of the solidifying steel shell have mainly focused on low-carbon steels. However, with the increasing applications of high-carbon steel in recent years because of its superior properties, it is crucial to understand this behavior in high-carbon steel. Most of the high-carbon steels are deoxidized by silicon, calcium treated, and contain higher sulfur percentage. Also, higher carbon content has a determining influence on the viscosity and surface tension, which will affect the inclusion behavior. In this study, we have investigated the engulfment behaviors of inclusions in front of the solidifying interface in high-carbon steels using concentric solidification method. The critical velocity of the growing shell, at which the particle is engulfed in the solidifying shell, instead of being pushed by this shell, was determined. The inclusion identified in this study is a bi-component form of CaO-SiO{sub 2}-based oxide and CaS. It was revealed that engulfment behavior is strongly affected by convection of liquid steel that originates from carbon push out in high-carbon steels. This study provides new crucial information to produce high-carbon steel with fewer inclusions, which opens new application pathways for this emerging grade of steel.

36 MATERIALS SCIENCE↗

Synthesis and characterization of R{sub 2}MnTiO{sub 7} (R = Y and Er) pyrochlores oxides

Graphical abstract: - Abstract: New pyrochlore-like phases of composition R{sub 2}MnTiO{sub 7} (R = Er and Y) have been synthesized by a soft-chemistry procedure involving citrates of the different metal ions followed by thermal treatments at moderate temperatures (850 °C for 12 h in air). A characterization by X-ray diffraction and neutron powder diffraction (NPD) has been carried out in order to determine the crystal structure features: these phyrochlores are cubic, space group Fd-3m, defining an intrinsically frustrated three-dimensional system. The Rietveld-refinement from NPD data at room temperature evidences an antisite cation disorder (distribution of Mn between A and B positions) that is accompanied by an increment of the oxygen-vacancy concentration due to the reduction of Mn{sup 4+} at the B position to Mn{sup 2+} at the A position. Thermogravimetric analysis (TGA) was useful to evaluate the stability of these oxides in reducing conditions up to 500 °C. Magnetic susceptibility measurements indicate a ferromagnetic behavior, due to the random distribution of Mn{sup 4+} ions in the octahedral sublattice. At lower temperatures there is a polarization of the R{sup +3} magnetic moments, which also participate in the magnetic structure. Aiming to evaluate these materials as possible electrodes for solid oxide fuel cells (SOFC) we determined that the thermal expansion coefficients between 100 and 900 °C perfectly match with those of the usual electrolytes; however, these pyrochlore oxides display a semiconductor-like behavior with poor conductivity values, e.g. 6 × 10{sup −3} cm{sup −1} at 850 °C for Er, which would prevent its use as MIEC (mixed ionic-electronic conductors) oxides in SOFC devices.

36 MATERIALS SCIENCE↗

An SECM-Based Spot Analysis for Redoxmer-Electrode Kinetics: Identifying Redox Asymmetries on Model Graphitic Carbon Interfaces

The fundamental process in non-aqueous redox flow battery (NRFB) operation revolves around electron transfer (ET) between a current collector electrode and redox-active organic molecules (redoxmers) in solution. Here, we present an approach utilizing scanning electrochemical microscopy (SECM) to evaluate interfacial ET kinetics between redoxmers and various electrode materials of interest at desired locations. This spot-analysis method relies on the measurement of heterogeneous electron transfer rate constants (k f or k b ) as a function of applied potential (E-E 0 '). As demonstrated by COMSOL simulations, this method enables the quantification of Butler-Volmer kinetic parameters, the standard heterogeneous rate constant, k 0 , and the transfer coefficient, α. Our method enabled the identification of inherent asymmetries in the ET kinetics arising during the reduction of ferrocene-based redoxmers, compared to their oxidation which displayed faster rate constants. Similar behavior was observed on a wide variety of carbon electrodes such as multi-layer graphene, highly ordered pyrolytic graphite, glassy carbon, and chemical vapor deposition-grown graphite films. However, aqueous systems and Pt do not exhibit such kinetic effects. Our analysis suggests that differential adsorption of the redoxmers is insufficient to account for our observations. Displaying a greater versatility than conventional electroanalytical methods, we demonstrate the operation of our spot analysis at concentrations up to 100 mM of redoxmer over graphite films. Looking forward, our method can be used to assess non-idealities in a variety of redoxmer/electrode/solvent systems with quantitative evaluation of kinetics for applications in redox-flow battery research.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Potential defect structure effects in the volatility separation of sub-picogram quantities of fission and activation products from an irradiated UO2 matrix

Here, the use of fluorination as a rapid separation technique for quantification of trace-mass, short-lived isotopes is illustrated. Single crystal 238 UO 2 was exposed to a 14 MeV neutron source to produce mixed fission and activation products. Selective removal of trace volatile fluorides from non-volatile ones produced two results of interest. A decrease in background produced better detection and quantification of select analytes across the gamma spectrum. Second, at the very low burnup condition described, the volatility behaviors of common isotopes were altered relative to their well-established behaviors in higher burnup metal and metal oxide fuels.

Fission and activation product separations↗

Evaluation of f -element borate chemistry

The synthesis, structure elucidation, and spectroscopic measurements of a myriad of new, f-element borates has revealed the unusual effects that this electron-rich oxoanion has on the electronic properties of lanthanides and actinides. One purpose of these studies was to provide models for actinide compounds that may exist in either vitrified nuclear waste or in repositories located within salt deposits that have significant borate content. In addition, the radiation-damage resilience of polyborate networks positions these materials as suitable candidates for probing coordination chemistry and physical properties much deeper into the actinide series than is normally possible, and compounds with actinides up to californium (Z = 98) have been successfully prepared and characterized in exquisite detail. Structural determination of these materials show that both the lanthanide and actinide series display previously unknown coordination chemistry, but, more importantly, that the two series have little overlap in terms of structure and composition, and have few parallels. In addition, some of these compounds display unique physico-chemical properties, one example of which is the selective trapping of radionuclides. The foremost discovery first identified in actinide borates is that the chemistry of californium represents an onset of unprecedented chemical behavior that compares better with high-oxidation state, early transition metal complexes than it does with earlier f-elements.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Effect of Surface Site Interactions on Potentiometric Titration of Hematite (α-Fe2O3) Crystal Faces

Time dependent potentiometric pH titrations were used to study the effect of atomic scale surface structure on the protonation behavior of the structurally well defined hematite/aqueous electrolyte interfaces. Our recently proposed thermodynamic model [1,23] was applied to measured acidimetric and alkalimetric titration hysteresis loops, collected from highly organized (001), (012), and (113) crystal face terminations using pH equilibration times ranging from 15 to 30 mins. Hysteresis loop areas indicate that (001) faces equilibrate faster than the (012) and (113) faces, consistent with the different expected ensembles of singly, doubly, and triply coordinated surface sites on each face. Strongly non-linear hysteretic pH-potential relationships were found, with slopes exceeding Nernstian, collectively indicating that protonation and deprotonation is much more complex than embodied in present day surface complexation models. The asymmetrical shape of the acidimetric and alkalimetric titration branches were used to illustrate a proposed steric "leaky screen" repulsion/trapping interaction mechanism that stems from high affinity singly-coordinated sites electrostatically and sterically screening lower affinity doubly and triply coordinated sites. Our data indicate that site interaction is the dominant phenomenon defining surface potential accumulation behavior on single crystal faces of metal oxide minerals.

Environmental Molecular Sciences Laboratory↗

Plutonium(IV) and (V) sorption to goethite at sub-femtomolar to micromolar concentrations: Redox transformations and surface precipitation

Here, Pu(IV) and Pu(V) sorption to goethite was investigated over a concentration range of 10 –15 –10 –5 M at pH 8. Experiments with initial Pu concentrations of 10 –15 – 10 –8 M produced linear Pu sorption isotherms, demonstrating that Pu sorption to goethite is not concentration-dependent across this concentration range. Equivalent Pu(IV) and Pu(V) sorption Kd values obtained at 1 and 2-week sampling time points indicated that Pu(V) is rapidly reduced to Pu(IV) on the goethite surface. Further, it suggested that Pu surface redox transformations are sufficiently rapid to achieve an equilibrium state within 1 week, regardless of the initial Pu oxidation state. At initial concentrations >10 –8 M, both Pu oxidation states exhibited deviations from linear sorption behavior and less Pu was adsorbed than at lower concentrations. NanoSIMS and HRTEM analysis of samples with initial Pu concentrations of 10 –8 – 10 –6 M indicated that Pu surface and/or bulk precipitation was likely responsible for this deviation. In 10 –6 M Pu(IV) and Pu(V) samples, HRTEM analysis showed the formation of a body centered cubic (bcc) Pu 4 O 7 structure on the goethite surface, confirming that reduction of Pu(V) had occurred on the mineral surface and that epitaxial distortion previously observed for Pu(IV) sorption occurs with Pu(V) as well.

54 ENVIRONMENTAL SCIENCES↗

Comparing Experimental Phase Behavior of Ion-Doped Block Copolymers with Theoretical Predictions Based on Selective Ion Solvation

The effects of salt-doping on the morphological behavior of block copolymers are well established but remain poorly understood, partially because of the challenge of resolving electrostatics in a heterogeneous medium with low average permittivity. By employing a recently developed field theory, we analyze the phase behavior of polystyrene-b-poly(ethylene oxide) (SEO) copolymers doped with lithium bis(trifluoromethanesulfonyl)imide salts (LiTFSI). Using a single fitting parameter, the ionic solvation radius, we obtain qualitative agreement between our theory and experimental data over a range of polymer molecular weights and copolymer compositions. Such agreement supports and highlights the need of solvation free energy to accurately describe the self-assembly of ion-doped block copolymers and demonstrates that experimentally observed dependence on molecular weight, not present in neutral block copolymers, can be rationalized by solvation effects. Overall, morphological variations are stronger than those predicted by the leading, linear order theory but can be captured by the full model.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

pH-dependent reactivity of water at MgO(100) and MgO(111) surfaces

Facet-dependent surface charging of metal oxides in water dominates the ion transport behavior across the interface, in turn impacting many natural and industrial processes such as adsorption, the formation and stabilization of nanoparticle suspensions, corrosion, and heterogeneous catalysis. Here we investigated the pH-dependent surface chemistry of two low-index MgO single crystal surfaces, namely MgO(100) and MgO(111), using vibrational sum frequency generation (vSFG) spectroscopy. This allowed us to evaluate facet-dependent pH effects on the hydration and hydroxylation at the solid/aqueous interface and point-of-zero charge (PZC) values. The MgO system is complicated by its thermodynamic instability with respect to Mg(OH) 2 in water at ambient conditions. Here, for both hydroxylated MgO(100) and MgO(111) surfaces, the PZC is found to be around pH ∼ 12, which compares well with reported values for MgO single crystal and nanoparticle surfaces. However, structure specific differences in the molecular water hydrogen bonding network near the surface are evident at mildly acidic pH. To our knowledge, this is the first account of the PZC values for the MgO(111) single-crystal surface, an electrostatically unstable MgO termination that is prone to reconstruction.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

The electrode–electrolyte interface of Cu via modulation excitation X-ray absorption spectroscopy

The development and application of modulation excitation X-ray absorption spectroscopy with sub-second resolution and better than 0.02% detection sensitivity unveils the kinetics of the anodic oxidation of Cu in bicarbonate electrolytes. Accessing the electrode–electrolyte interface under operating conditions and capturing time-resolved kinetics remain challenging in electrochemical studies. Copper's interfacial oxidation dynamics remain unclear despite extensive research. Modulation excitation X-ray absorption spectroscopy (ME-XAS) was used to probe Cu in 100 mM KHCO 3 with sub-second sensitivity, revealing that hydroxide forms 30 ± 10 ms before the appearance of Cu 2 O at positive potentials (0 to 0.5 V vs. RHE) near open-circuit conditions. From −0.4 to 0.8 V vs. RHE, hydroxide coverage reaches 49%, accompanied by a balanced presence of Cu( i ) and Cu( ii ) oxides. These insights into Cu interfacial redox behavior under intermittent renewable energy operation—relevant to CO 2 electrolyzer durability—enhance our fundamental understanding of electrochemical interfaces.

Garcia-Esparza, Angel T↗

Structural characterization of acyl-CoA oxidases reveals a direct link between pheromone biosynthesis and metabolic state in Caenorhabditis elegans

Caenorhabditis elegans secretes ascarosides as pheromones to communicate with other worms and to coordinate the development and behavior of the population. Peroxisomal β-oxidation cycles shorten the side chains of ascaroside precursors to produce the short-chain ascaroside pheromones. Acyl-CoA oxidases, which catalyze the first step in these β-oxidation cycles, have different side chain-length specificities and enable C. elegans to regulate the production of specific ascaroside pheromones. Here, we determine the crystal structure of the acyl-CoA oxidase 1 (ACOX-1) homodimer and the ACOX-2 homodimer bound to its substrate. Our results provide a molecular basis for the substrate specificities of the acyl-CoA oxidases and reveal why some of these enzymes have a very broad substrate range, whereas others are quite specific. Our results also enable predictions to be made for the roles of uncharacterized acyl-CoA oxidases in C. elegans and in other nematode species. Remarkably, we show that most of the C. elegans acyl-CoA oxidases that participate in ascaroside biosynthesis contain a conserved ATP-binding pocket that lies at the dimer interface, and we identify key residues in this binding pocket. ATP binding induces a structural change that is associated with tighter binding of the FAD cofactor. Mutations that disrupt ATP binding reduce FAD binding and reduce enzyme activity. Furthermore, ATP may serve as a regulator of acyl-CoA oxidase activity, thereby directly linking ascaroside biosynthesis to ATP concentration and metabolic state.

59 BASIC BIOLOGICAL SCIENCES↗

Width-bending characteristic of REBCO HTS tape and flat-tape Rutherford-type cabling

Abstract The width-bending behaviors for a rare earth barium copper oxide (REBCO) high-temperature superconducting (HTS) tape have been investigated. It has been found experimentally that the width-bending strain of a Yttrium Barium Copper Oxide (YBCO) tape does not degrade the critical current as much as is expected from the axial strain. The critical current is not directly affected by the width-bending strain but by the axial strain, which the width-bending strain generates by the Poisson effect. Since Poisson’s ratio is about 0.3, the axial strain effective on the critical current is about 30% of the width-bending strain. Therefore, the width-bending strain of even 1.5% degrades the critical current by only 15% if the REBCO layer side is bent inward. However, the critical current degraded by more than 70% when the REBCO layer is outward. The width-bending effects on the critical current have been further examined, considering Poisson’s ratio changes and the neutral plane shift of the REBCO tape substrate. Those changes would occur when the material yields due to severe width-bending. Based on the width-bending of REBCO tapes, flat-tape Rutherford-type cabling is discussed. A REBCO Rutherford-type cable can provide various advantages, especially for narrow-tape cabling. The flat-tape Rutherford-type cable has better characteristics against an electromagnetic transverse Lorentz force. Furthermore, the tape length of the cable can be approximately the same as the cable length allowing for excellent tape usage. REBCO Rutherford-type cabling will be a promising high-current, high-field cabling method using thin substrate REBCO tapes. It will be useful for AC ramp-field and pulse-field applications with low AC losses and low shield currents. It notes that the filaments in the cable are symmetrically distributed in parallel. Therefore, each filament’s inductance is uniform, and a uniform current distribution among the filaments can be obtained.

Physics↗