Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Neutron diffraction”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,333 records · Page 74

Out-of-pile and postirradiated examination of lanthanide and lanthanide-palladium interactions for metallic fuel

Palladium is being investigated as a fuel additive to bind with and potentially immobilize lanthanide fission products. A primary cause of fuel-cladding chemical interaction (FCCI) is the lanthanide fission products migrating to the fuel periphery and interacting with the cladding. This interaction will lead to wastage of the cladding and eventually to a cladding breach. Palladium has previously been identified as a promising additive used to prevent or decrease FCCI by reacting with the lanthanide fission products. In the current study, an alloy cast from the four highest abundant lanthanides found in irradiated metallic fuel, Nd, Ce, Pr, and La, with and without Pd, has been characterized using neutron diffraction, scanning electron microscopy, and electron probe microanalysis. In the lanthanide-Pd intermetallic compounds, all of the constituent compounds, i.e. Nd-Pd, Ce-Pd, La-Pd and Pr-Pd are known. There is very good agreement, both structurally and compositionally, between the out-of-pile lanthanide alloy and lanthanide fission products characterized in irradiated fuels. In both cases, the lanthanide elements form a solid solution in a hexagonal crystal structure. The out-of-pile lanthanide alloy follows Vegard's Law, with the measured and calculated (weighted average of constituents) lattice parameters being within 1% for both the a and c parameters. Pd bonds with the lanthanides (Ln) forming the phases LnPd and Ln7Pd3. The results indicate the properties of lanthanide compounds in irradiated metallic fuel can be reliably simulated in out-of-pile experiments.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

High-temperature mechanical properties of a γ′-strengthened Co-based superalloy designed for additive manufacturing

GammaPrint®-700 is a recently developed high γ′ (∼70% volume fraction) CoNi-based superalloy designed to combine high-temperature mechanical performance with laser powder bed fusion processability. Room-temperature yield strength ranged from 610 to 658 MPa and increased to 661 MPa (longitudinal) and 730 MPa (transverse) at 760 °C. The creep behavior compared favorably to high-γ′ Ni-based superalloys manufactured via laser powder bed fusion such as Incoloy® 939 and Inconel® 738LC. In-situ neutron diffraction data measured during creep revealed that plastic deformation was largely localized to the γ phase at 760 °C, allowing the γ’ phase to elastically compensate and maintain creep strain resistance. Furthermore, at 900 °C, this load sharing behavior was weakened, contributing to accelerated creep rate and rupture.

Creep↗

Emergence of the isotropic Kitaev honeycomb lattice $α$–RuCl 3 and its magnetic properties

Here, we present a comprehensive investigation of the crystal and magnetic structures of the van der Waals antiferromagnet $α$–RuCl 3 using single crystal x-ray and neutron diffraction. The crystal structure at room temperature is a monoclinic (C2/m). However, with decreasing temperature, a remarkable first-order structural phase transition is observed, leading to the emergence of a rhombohedral ($R\bar3$) structure characterized by three-fold rotational symmetry forming an isotropic honeycomb lattice. On further cooling, a zigzag-type antiferromagnetic order develops below $T_{\textrm{N}} = 6\sim6.6$ K. The critical exponent of the magnetic order parameter was determined to be $\beta = 0.11(1)$, which is close to the two-dimensional Ising model. Additionally, the angular dependence of the magnetic critical field of the zigzag antiferromagnetic order for the polarized ferromagnetic phase reveals a six-fold rotational symmetry within the ab–plane. These findings reflect the symmetry associated with the Ising-like bond-dependent Kitaev spin interactions and underscore the universality of the Kitaev interaction-dominated antiferromagnetic system.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

In situ monitoring of dislocation, twinning, and detwinning modes in an extruded magnesium alloy under cyclic loading conditions

This work investigates the microscopic deformation mechanisms of an extruded, precipitation-strengthened AZ80 magnesium (Mg) alloy subjected to strain-controlled low-cycle fatigue using in situ neutron diffraction measurements. Results demonstrate that the plastic deformation during cyclic loading is dominated by the alternating {10.2} extension twinning and detwinning mechanisms. The observed deformation mode is strongly texture and precipitate dependent. For the initial texture, the tested material has two major texture components which result in the occurrence of extension twinning during both compression and reverse tension in the first two cycles. The prolonged detwinning process in the following cycles is proposed to relieve the shear stress field of {00.2} grains, leading to the disappearance of twinning. The precipitation strengthening results in an increase of the critical resolved shear stress (CRSS) by similar to 33 MPa for the extension twinning in this AZ80 alloy. Here, the synergistic effects of the initial texture, precipitation strengthening, and load sharing of various grain families and phases contribute to the complicated evolution of dominant deformation mechanisms, among which elevated dislocation activities are believed to be responsible for the relatively poor low-cycle-fatigue lifetime when compared to other Mg alloys.

36 MATERIALS SCIENCE↗

The influence of thermomechanical treatment pathways on texture and mechanical properties in ARB Cu/Nb nanolaminates

Accumulative roll-bonded Cu/Nb nanolaminates (ARB Cu/Nb) possess high strength, thermal stability, and radiation tolerance arising from a high content of heterophase interfaces at fine layer thicknesses. These properties can be tailored by processing parameters used in the ARB Cu/Nb fabrication process, in which layer thickness, thermal history, and strain pathway determine the interface types and resultant properties found in the material. In this work, we subject ARB Cu/Nb to annealing, and then two different rolling pathways – one where rolling direction is held constant (longitudinal rolling, or LR), and one where rolling direction is rotated by 90º and held constant thereafter (cross rolling, or CR). Rolling is performed on ARB Cu/Nb over a targeted range of layer thicknesses from 193 to 25 nm and resultant bulk textures measured by neutron diffraction are correlated with mechanical properties measured by miniaturized tensile tests. The annealing procedure sharpens texture in both phases. We find that Cu mostly develops the same texture in LR and CR. In contrast, Nb develops a distinct texture along the CR pathway that is distinct from the LR texture. The composite texture of Cu/Nb is thus distinct between LR and CR pathways. This difference in texture development between Cu and Nb as a function of strain after change in rolling direction demonstrates the viability for deliberate pairing of Cu LR and Nb CR textures at a desired layer thickness. For mechanical properties, we find that differences in texture do not result in yield or flow stress differences above a layer thickness of 25 nm. Below a layer thickness of 25 nm, despite similar Taylor factors, yield and flow stress and are significantly different. In conclusion, this indicates texture only influences mechanical behavior at low layer thickness, where interface structure dominates mechanical properties.

36 MATERIALS SCIENCE↗

A study on fatigue crack growth behavior subjected to a single tensile overload: Part II. Transfer of stress concentration and its role in overload-induced transient crack growth

The combined effects of overload-induced enlarged compressive residual stresses and crack tip blunting with secondary cracks are suggested to be responsible for the observed changes in the crack opening load and resultant post-overload transient crack growth behavior [Lee SY, Liaw PK, Choo H, Rogge RB, Acta Mater 2010;59:485-94]. In this article, in situ neutron diffraction experiments were performed to quantify the influence of the combined effects by investigating the internal-stress evolution at various locations away from the crack tip. In the overload-retardation period, stress concentration occurs in the crack blunting region (an overload point) until a maximum crack arrest load is reached. The stress concentration is then transferred from the blunting region to the propagating crack tip (following the overload), requiring a higher applied load, as the closed crack is gradually opened. The transfer phenomena of the stress concentration associated with a crack opening process account for the nonlinearity of strain response in the vicinity of the crack tip. The delaying action of stress concentration at the crack tip is understood in conjunction with the concept of a critical stress (i.e. the stress required to open the closed crack behind the crack tip). A linear relationship between {Delta}{var_epsilon}{sub eff} and {Delta}K{sub eff} provides experimental support for the hypothesis that {Delta}K{sub eff} can be considered as the fatigue crack tip driving force.

36 MATERIALS SCIENCE↗

Néel-type antiferromagnetic order and magnetic field–temperature phase diagram in the spin-1/2 rare-earth honeycomb compound YbCl 3

Most of the searches for Kitaev materials deal with 4 d / 5 d magnets with spin-orbit-coupled J = 1 / 2 local moments such as iridates and α - RuCl 3 . Here we propose the monoclinic YbCl 3 with a Yb 3 + honeycomb lattice for the exploration of Kitaev physics. We perform thermodynamic, a c susceptibility, angle-dependent magnetic torque, and neutron diffraction measurements on YbCl 3 single crystal. We find that the Yb 3 + ion exhibits a Kramers doublet ground state that gives rise to an effective spin J eff = 1 / 2 local moment. Additionally, the compound exhibits short-range magnetic order below 1.20 K, followed by a long-range Néel-type antiferromagnetic order at 0.60 K, below which the ordered Yb 3 + spins lie in the a c plane with an angle of 16(11) ° away from the a axis. These orders can be suppressed by in-plane and out-of-plane magnetic fields at around 6 and 10 T, respectively. Moreover, the Néel temperature varies nonmonotonically under the out-of-plane magnetic fields, suggesting a reduced spin dimensionality. Finally, together with the strong in-plane magnetic anisotropy and the reduced order moment 0.8(1) μ B at 0.25 K, all indicate that YbCl 3 could be a two-dimensional spin system to proximate the Kitaev physics.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Magnetic Phase Diagrams of R{sub 1–x}Sr{sub x}(Mn{sub 1–x/2}Sb{sub x/2})O{sub 3} (R = La, Pr, Nd, Sm, Eu) with Trivalent Manganese Ions

The results of neutron-diffraction, magnetic, and magnetotransport studies of La{sub 1‒x}Sr{sub x}(Mn{sub 1-x/2}{sup 3+}Sb{sub x/2}{sup 5+})O{sub 3} (x ≤ 0.7) pervoskites, which contain only Mn{sup 3+} ions, are reported. It is demonstrated that the system undergoes a transition from the antiferromagnetic state to the ferromagnetic one at x ∼ 0.2. Its structure then changes from O′-orthorombic to O-orthorombic, which is attributable to orbital disordering. At x ≥ 0.6, the competition between antiferromagnetic and ferromagnetic interactions and strong diamagnetic dilution trigger the emergence of the cluster spin-glass phase. As the ionic radius of rare-earth ions in R{sub 0.7}Sr{sub 0.3}Mn{sub 0.85}Sb{sub 0.15}O{sub 3} decreases, the ferromagnetic state transforms gradually into spin glass (R = Sm). All ferromagnetic compositions are dielectric in the magnetically ordered phase with strong magnetoresistive effects. It is assumed that ferromagnetism is induced by the strong covalency and orbital disordering.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Hydrogenation studies on NdScSi and NdScGe

NdScSi and NdScGe were synthesized from the elements via arc-melting and subsequent annealing. Their ordered La{sub 2}Sb type structures, with space group I4/mmm, were refined from single crystal X-ray diffractometer data: a=428.94(6) and b=1570.5(3) pm, wR2=0.0395, 309 F{sup 2} values for NdScSi and a=431.2(1) and c=1581.3(5) pm, wR2=0.1220, 227 F{sup 2} values for NdScGe, with 11 variables per refinement. Hydrogen insertion was performed on both Nd-based intermetallics by solid/gas reaction. Hydrogen uptake keeps the pristine compound space group but yields an anisotropic expansion of the unit cell with a large increase of c (≈+7%) and a slight decrease of a (≈−1.7%) parameters. Hydrogen absorption at 350 °C and under 5 bar of H{sub 2} pressure shows that the hydride NdScSiH{sub 1.48(5)} is formed. An in-situ neutron diffraction study during the deuteration of NdScSi reveals for the first time in a CeScSi-type compound, the possibility to fill two interstitial sites with deuterium atoms, leading to the composition NdScSiD{sub 1.5} for the deuteride adopting then the La{sub 2}Fe{sub 2}Se{sub 2}O{sub 3}-type structure. From magnetization measurements, we evidence that hydrogenation strongly reduces the Curie temperature of NdScSi (T{sub C}=175 K) and NdScGe (T{sub C}=194 K) since NdScSiH{sub 1.5} and NdScGeH{sub x} undergo a magnetic transition at 4 K and around 2 K, respectively. - Highlights: • Crystal structures of NdScSi and NdScGe were refined from single crystal XRD data. • The hydrogenation of NdScSi leads to the formation of the NdScSiH{sub 1.5} hydride. • NdScSiD{sub 1.5} adopts the La{sub 2}Fe{sub 2}Se{sub 2}O{sub 3}-type structure. • Hydrogenation strongly reduces the ordering temperature of both intermetallics.

36 MATERIALS SCIENCE↗

Deformation behavior of additively manufactured GP1 stainless steel

In-situ neutron diffraction measurements were performed in this paper during heat-treating and uniaxial loading of additively manufactured (AM) GP1 material. Although the measured chemical composition of the GP1 powder falls within the composition specifications of 17-4 PH steel, a fully martensitic alloy in the wrought condition, the crystal structure of the as-built GP1 material is fully austenitic. Chemical analysis of the as-built material shows high oxygen and nitrogen content, which then significantly decreased after heat-treating in a vacuum furnace at 650 °C for one hour. Significant austenite-to-martensite phase transformation is observed during compressive and tensile loading of the as-built and heat-treated material with accompanied strengthening as martensite volume fraction increases. During loading, the initial average phase stress state in the martensite is hydrostatic compression independent of the loading direction. Finally, preferred orientation transformation in austenite and applied load accommodation by variant selection in martensite are observed via measurements of the texture development.

36 MATERIALS SCIENCE↗

Role of critical fluctuations in the formation of a skyrmion lattice in MnSi

The region in the H–T phase diagram near the critical temperature (T{sub c}) of the cubic helicoidal MnSi magnet is comprehensively studied by small-angle neutron diffraction. Magnetic field H is applied along the [111] axis. The experimental geometry is chosen to simultaneously observe the following three different magnetic states of the system: (a) critical fluctuations of a spin spiral with randomly orientated wavevector k{sub f}, (b) conical structure with k{sub c} ǁ H, and (c) hexagonal skyrmion lattice with k{sub sk} ⊥ H. Both states (conical structure, and skyrmion lattice) are shown to exist above critical temperature T{sub c} = 29 K against the background of the critical fluctuations of a spin spiral. The conical lattice is present up to the temperatures where fluctuation correlation length ξ becomes comparable with pitch of spiral d{sub s}. The skyrmion lattice is localized near T{sub c} and is related to the fluctuations of a spiral with correlation length ξ ≈ 2d{sub s}, and the propagation vector is normal to the field (k{sub sk} ⊥ H). These spiral fluctuations are assumed to be the defects that stabilize the skyrmion lattice and promote its formation.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Synthesis, structure and electrochemical properties of layered La{sub 2}Li{sub 2x}(CO{sub 3}){sub 1−x}O{sub 2+2x}

An oxide ion conductor, La{sub 2}Li{sub 2x}(CO{sub 3}){sub 1−x}O{sub 2+x} (x=0.15), was synthesized using a solid-state reaction, and its structure was subsequently determined by Rietveld refinement analyses of synchrotron X-ray and high-resolution powder neutron diffraction data. These analyses determined that carbonate groups are situated between (La{sub 2}O{sub 2}{sup 2+}){sub n} layers in an ordered arrangement and that both oxygen vacancies and interstitial oxygen ions exist within the carbonate layers, resulting in a composition of La{sub 2}Li{sub 0.3}(CO{sub 3}){sub 0.85}O{sub 2.3}. This material is structurally stable up to 500 °C and exhibits a conductivity of 5.5×10{sup −5} S cm{sup −1} at 450 °C. Oxide vacancies associated with carbonate anions appear to be responsible for the ionic conduction observed in this material. - Graphical abstract: Thermal ellipsoid projection of the carbonate layer viewed from the c-axis, showing oxygen migration paths: (A, blue line) interstitial hopping and (B, green line) co-operative rotation. Display Omitted - Highlights: • Lithium insertion in the structure causes the structural changes in carbonate layer. • These structural changes create oxygen vacancies within the flexible carbonate layers and introduce interstitial oxygen. • These interstitial oxygen atoms and oxygen vacancies are involved in oxide ion diffusion through the carbonate layer.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Crystallographic superstructure in R2PdSi3 (R = heavy rare earth) compounds

The R2PdSi3 intermetallic compounds have been reported to crystallize in a hexagonal AlB2- derived structure, with the rare earth atoms on the Al sites and Pd and Si atoms randomly distributed on the B sites. However, the intricate magnetic properties observed in the series of compounds have always suggested complications to the assumed structure. To clarify the situation, x-ray and neutron diffraction measurements were performed on the heavy rare earth compounds with R = Gd, Tb, Dy, Ho, Er, Tm, which revealed the existence of a crystallographic superstructure. The superstructure features a doubled unit cell in the hexagonal basal plane and an octuplication along the perpendicular c direction with respect to the primitive cell. No structural transition was observed between 300 K and 1.5 K. Extended x-ray absorption fine structure (EXAFS) analysis as well as density functional theory (DFT) calculations were utilized to investigate the local environments of the respective atoms. In this article the various experimental results will be presented and it will be shown that the superstructure is mainly due to the Pd-Si order on the B sites. A structure model will be proposed to fully describe the superstructure of Pd-Si order in R2PdSi3. The connection between the crystallographic superstructure and the magnetic properties will be discussed in the framework of the presented model.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Structural and magnetic properties of the quaternary oxides Ba{sub 6}Ln{sub 2}Fe{sub 4}O{sub 15} (Ln=Pr and Nd)

The crystal structures and magnetic properties of the quaternary lanthanide oxides Ba{sub 6}Ln{sub 2}Fe{sub 4}O{sub 15} (Ln=Pr and Nd) are reported. They crystallize in a hexagonal structure with space group P6{sub 3}mc and have the 'Fe{sub 4}O{sub 15} cluster' consisting of one FeO{sub 6} octahedron and three FeO{sub 4} tetrahedra. Measurements of the magnetic susceptibility, specific heat, and powder neutron diffraction reveal that this cluster behaves as a spin tetramer with a ferrimagnetic ground state of S{sub T}=5 even at room temperature. The cluster moments show a long-range antiferromagnetic ordering at 23.2 K (Ln=Pr) and 17.8 K (Nd), and the magnetic moments of the Ln{sup 3+} ions also order cooperatively. By applying the magnetic field ({approx}2 T), this antiferromagnetic ordering of the clusters changes to a ferromagnetic one. This result indicates that there exists a competition in the magnetic interaction between the clusters. - Graphical abstract: Quaternary oxides Ba{sub 6}Ln{sub 2}Fe{sub 4}O{sub 15} (Ln=Pr and Nd) have the Ba{sub 6}Nd{sub 2}Al{sub 4}O{sub 15}-type structure with space group P6{sub 3}mc. In them, the magnetic moments for the ferrimagnetic Fe{sub 4}O{sub 15} cluster (smaller circles: Fe{sup 3+} ions) and Ln{sup 3+} ions (larger ones) cooperatively show an antiferromagnetic ordering at low temperatures.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Complex magnetic ground state driving a large rotating magnetocaloric effect in Tb 3 Ni at low temperature

The rotating magnetocaloric effect (RMCE) offers a promising alternative to conventional magnetocaloric configurations by taking advantage of magnetic anisotropy to simplify device architecture and enhance refrigeration efficiency. In this study, the RMCE in a high-quality single crystal of Tb 3 Ni is investigated, a compound previously shown to exhibit significant magnetocaloric behavior along its easy axis of magnetization. By measuring the magnetization and corresponding entropy change along the three principal crystallographic axes using a discontinuous measurement protocol, we verify the anisotropic magnetic properties and derive the RMCE from rotations between hard ( a, b ) and easy ( c ) axes of magnetization. Our results show a maximum value for the rotating entropy change of 19.5 J kg −1 K −1 for µ 0 H = 7 T around 60 K, within the critical temperature window for industrial gas liquefaction applications. Neutron diffraction and magnetic Pair-Distribution Function (mPDF) analysis reveal that the origin of this large anisotropic response lies in a partially ordered incommensurate spin-density wave phase and persistent short-range ferromagnetic (FM) correlations. These complex magnetic states enable the release of a substantial amount of magnetic entropy when the field is applied along the easy c-axis, effectively driving the large RMCE. Comparison with other RMCE materials confirms Tb 3 Ni as one of the most promising candidates in this temperature regime, offering both a large magnetic entropy change and a wide operating window.

Gas liquefaction↗

Disordering effects in the atomic structure of fine-crystalline HTSC YBa{sub 2}Cu{sub 3}O{sub y}

The atomic structure of YBa{sub 2}Cu{sub 3}O{sub y} fine-crystalline HTSC samples with various average crystallite sizes Left-Pointing-Angle-Bracket D Right-Pointing-Angle-Bracket ranging from 0.4 to 2 {mu}m and an oxygen concentration y close to the optimal value for superconductivity (y Almost-Equal-To 6.93) is investigated by the neutron diffraction technique. We have found some effects associated with the redistribution of cations and oxygen atoms and with variations in the positions of atomic layers in the unit cell, which are not observed in macrocrystalline samples. In all probability, these effects appear due to nonequilibrium conditions of synthesis required for obtaining this compound in the fine-crystalline state. The results have made it possible to explain the peculiar physical properties of fine-crystalline YBa{sub 2}Cu{sub 3}O{sub y} samples (in particular, the coexistence of high superconducting transition temperatures T{sub c} and noticeably lower values of magnetization in strong magnetic fields for T < T{sub c}). It is shown that a nanoscale structural inhomogeneity exists in fine-crystalline YBa{sub 2}Cu{sub 3}O{sub y} samples with the optimal oxygen content and changes the fundamental superconducting parameters, viz., the magnetic field penetration depth and the coherence length.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Determination of the Magnetic Structure of Yb3Pt4:a k=0 Local-moment Antiferromagnet

We have used neutron-diffraction measurements to study the zero-field magnetic structure of the intermetallic compound Yb{sub 3}Pt{sub 4}, which was earlier found to order antiferromagnetically at the Neel temperature T{sub N} = 2.4 K, and displays a field-driven quantum-critical point at 1.6 T. In Yb{sub 3}Pt{sub 4}, the Yb moments sit on a single low-symmetry site in the rhombohedral lattice with space group R{bar 3}. The Yb ions form octahedra with edges that are twisted with respect to the hexagonal unit cell, a twisting that results in every Yb ion having exactly one Yb nearest neighbor. Below T{sub N}, we found new diffracted intensity due to a k=0 magnetic structure. This magnetic structure was compared to all symmetry-allowed magnetic structures and was subsequently refined. The best-fitting magnetic-structure model is antiferromagnetic and involves pairs of Yb nearest neighbors on which the moments point almost exactly toward each other. This structure has moment components within the ab plane as well as parallel to the c axis although the easy magnetization direction lies in the ab plane. Our magnetization results suggest that besides the crystal-electric-field anisotropy, anisotropic exchange favoring alignment along the c axis is responsible for the overall direction of the ordered moments. The magnitude of the ordered Yb moments in Yb{sub 3}Pt{sub 4} is 0.81 {mu}{sub B}/Yb at 1.4 K. The analysis of the bulk properties, the size of the ordered moment, and the observation of well-defined crystal-field levels argue that the Yb moments are spatially localized in zero field.

36 MATERIALS SCIENCE↗

Lithium stoichiometry of solid electrolytes based on tetragonal Li{sub 7}La{sub 3}Zr{sub 2}O{sub 12}

Graphical abstract: - Highlights: • We prepared Li{sub x}La{sub 3}Zr{sub 2}O{sub 8.5+0.5x} (x = 6, 7, 8, 9, 10) by the citrate–nitrate method. • We studied phase composition and conductivity of Li{sub x}La{sub 3}Zr{sub 2}O{sub 8.5+0.5x}. • We proposed a simple method to determine the carbonate impurity content in the solid electrolytes. • The synthesized solid electrolytes Li{sub x}La{sub 3}Zr{sub 2}O{sub 8.5+0.5x} (x = 7–9) have 1.32–3.49 wt.% Li{sub 2}CO{sub 3}. • The composition with x = 9 has high total conductivity, 7.5 × 10{sup −6} S cm{sup −1}, at room temperature. - Abstract: Samples of Li{sub x}La{sub 3}Zr{sub 2}O{sub 8.5+0.5x} (x = 6, 7, 8, 9, 10) were synthesized with the citrate–nitrate method. Neutron diffraction studies have shown the presence of lithium carbonate impurities in the synthesized compounds. We propose a simple and effective method to determine the carbonate impurity content in the solid electrolytes. The technique is based on the measurement of the carbon dioxide volume produced from the interaction of the investigated material with acid. Determined in this way, the content of Li{sub 2}CO{sub 3} in the synthesized electrolytes Li{sub 7}La{sub 3}Zr{sub 2}O{sub 12}, Li{sub 8}La{sub 3}Zr{sub 2}O{sub 12.5} and Li{sub 9}La{sub 3}Zr{sub 2}O{sub 13} are 1.32 ± 0.04, 1.95 ± 0.06 and 3.49 ± 0.10 wt.%, respectively. From the obtained data, the actual lithium content per formula unit of complex oxide was calculated for the synthesized compounds. The composition with x = 9 had the highest total conductivity, σ = 7.5 × 10{sup −6} S cm{sup −1}, at room temperature. All the investigated electrolytes have an activation energy of approximately 50 kJ mol{sup −1}.

36 MATERIALS SCIENCE↗