Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Nanostructure”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,333 records · Page 74

Composition, nanostructure, and optical properties of silver and silver-copper lusters

Lusters are composite thin layers of coinage metal nanoparticles in glass displaying peculiar optical properties and obtained by a process involving ionic exchange, diffusion, and crystallization. In particular, the origin of the high reflectance (golden-shine) shown by those layers has been subject of some discussion. It has been attributed to either the presence of larger particles, thinner multiple layers or higher volume fraction of nanoparticles. The object of this paper is to clarify this for which a set of laboratory designed lusters are analysed by Rutherford backscattering spectroscopy, transmission electron microscopy, x-ray diffraction, and ultraviolet-visible spectroscopy. Model calculations and numerical simulations using the finite difference time domain method were also performed to evaluate the optical properties. Finally, the correlation between synthesis conditions, nanostructure, and optical properties is obtained for these materials.

36 MATERIALS SCIENCE↗

Phase evolution in carbide dispersion strengthened nanostructured copper composite by high energy ball milling

In this study, high-energy ball milling was applied to synthesis in situ nanostructured copper based composite reinforced with metal carbides. Cu, M (M=W or Ti) and graphite powder mixture were mechanically alloyed for various milling time in a planetary ball mill with composition of Cu-20vol%WC and Cu-20vol%TiC. Then the as-milled powder were compacted at 200 to 400 MPa and sintered in a vacuum furnace at 900 Degree-Sign C. The results of X-ray diffraction, scanning electron microscopy and energy dispersive spectroscopy analysis showed that formation of tungsten carbides (W{sub 2}C and WC phases) was observed after sintering of Cu-W-C mixture while TiC precipitated in as-milled powder of Cu-Ti-C composite after 5 h and become amorphous with longer milling. Mechanism of MA explained the cold welding and fracturing event during milling. Cu-W-C system shows fracturing event is more dominant at early stage of milling and W particle still existed after milling up to 60 h. While in Cu-Ti-C system, cold welding is more dominant and all Ti particles dissolved into Cu matrix.

36 MATERIALS SCIENCE↗

Formation of nanostructured TiO{sub 2} by femtosecond laser irradiation of titanium in O{sub 2}

We used femtosecond laser irradiation of titanium metal in an oxidizing environment to form a highly stable surface layer of nanostructured amorphous titanium dioxide (TiO{sub 2}). We studied the influence of atmospheric composition on these surface structures and found that gas composition and pressure affect the chemical composition of the surface layer but not the surface morphology. Incorporation of nitrogen is only possible when no oxygen is present in the surrounding atmosphere.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Platinum nanostructures formed by femtosecond laser irradiation in water

Platinum nanostructures with various morphologies, such as spike-like, ripple-like and array-like structures, have been fabricated by 400 nm and 800 nm femtosecond laser irradiation in water. Different structures can be formed on the surfaces as a function of the laser wavelength, the fluence and scan methods. The reflectance measurements of these structures show much larger absorption on the irradiated surfaces than untreated platinum surfaces.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Characteristics of ZnO nanostructures produced with [DMIm]BF{sub 4} using ultrasonic radiation

Great interests in metallic oxides have emerged because of the promising properties of these materials for various applications such as solar cells and sensors. ZnO nanostructures with different morphologies were successfully synthesized from Zn(CH{sub 3}COO){sub 2} Bullet 2H{sub 2}O, NaOH and room temperature ionic liquid (RTIL) 1-decyl-3-methylimidazolium tetrafluoroborate, [DMIm][BF{sub 4}] with ultrasound irradiation. Parameters such as the effect of sonication time (30, 60 and 90 minutes) and Zn(Ac){sub 2} precursor to [DMIm][BF{sub 4}] ratios of 3:5, 5:5 and 5:3 were investigated. X-ray diffraction patterns revealed that the ZnO nanocrystals were hexagonal zincite crystalline in structure. The band gap energies (E{sub g}) were estimated to be 3.35-3.55 eV from the UV-Visible spectrum. The solution with the highest ratio of Zn was analysed with photoluminescence spectroscopy, which exhibited peaks at 362, 403, 468 and 539 nm, at room temperature. The micrographs of field emission scanning electron microscopy and transmission electron microscopy showed that the synthesis products were spherical (30-60 nm), spindle ({approx}10 Multiplication-Sign 70 nm for width Multiplication-Sign length) and whisker-like (100-200 nm), with their dimensions decreasing systematically with increased sonication time. Chemical compositions were approximated at 1:1 for Zn and O, estimated by electron dispersive x-ray spectrum.

36 MATERIALS SCIENCE↗

The effect of native oxide on ion-sputtering-induced nanostructure formation on GaSb surfaces

We have investigated the influence of native oxides on ion-sputtering-induced nanostructure formation on GaSb using in situ low energy ion scattering spectroscopy (LEISS) and X-ray photoelectron spectroscopy (XPS). Comparing an oxygen-free sample with a native oxide sample, LEISS and XPS reveal the effect of oxygen in generating higher surface Ga fractions during early stages (fluences of 1 Multiplication-Sign 10{sup 15}-1 Multiplication-Sign 10{sup 16} cm{sup -2}) of low energy (<100 eV) Ar+ irradiation. Enhanced surface Ga and Ga{sub 2}O{sub 3} fractions were also observed on 'oxide free' samples exposed to air following irradiation. The results suggest preferential Ga oxidation and segregation on the top of the amorphous layer if oxygen is present on the surface. In addition, the native oxide also increases the fluence threshold for nanopatterning of GaSb surfaces by almost a factor of four during low energy irradiation.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Effect of post-deposition treatment on energy conversion efficiency of nanostructured CdS/Cu{sub 2}S thin films

In the present manuscript we report about synthesis of nanostructured CdS/Cu{sub 2}S thin films by economically viable soft chemical route and effect of post deposition treatments such as annealing in air and swift heavy ion irradiation on solar energy conversion efficiency of the heterojunction device. These as grown, annealed and irradiated thin films are characterized for structural, morphological, optical and I-V properties. X-ray diffraction pattern (XRD) represents structural as well as crystallite modifications, atomic force microscopy (AFM) shows improvement in surface appearance of the materials. The solar energy conversion efficiency calculated from I-V exhibited increase in conversion efficiency i. e. 0.09, 0.24 and 0.48 % for as grown, annealed and SHI irradiated thin films.

36 MATERIALS SCIENCE↗

Nanostructuring superconductors by ion beams: A path towards materials engineering

The paper deals with nanostructuring of superconducting materials by means of swift heavy ion beams. The aim is to modify their structural, optical and electromagnetic properties in a controlled way, to provide possibility of making them functional for specific applications. Results are presented concerning flux pinning effects (implantation of columnar defects with nanosize cross section to enhance critical currents and irreversibility fields), confined flux-flow and vortex guidance, design of devices by locally tailoring the superconducting material properties, analysis of disorder-induced effects in multi-band superconductors. These studies were carried out on different kinds of superconducting samples, from single crystals to thin films, from superconducting oxides to magnesium diboride, to recently discovered iron-based superconductors.

36 MATERIALS SCIENCE↗

Preliminary study of CdTe and CdTe:Cu thin films nanostructures deposited by using DC magnetron sputtering

Growth and properties of CdTe and CdTe:Cu thin films nanostrucures deposited by using dc magnetron sputtering are reported. Scanning electron microscope (SEM) was used to observe the surface morphologies of the thin films. At growth conditions of 250 °C and 14 W, CdTe films did not yet evenly deposited. However, at growth temperature and plasma power of 325 °C and 43 W, both CdTe and CdTe:Cu(2%) have deposited on the substrates. In this condition, the morphology of the films indicate that the films have a grain-like nanostructures. Grain size diameter of about 200 nm begin to appear on top of the films. Energy Dispersive X-rays spectroscopy (EDX) was used to investigate chemical elements of the Cu doped CdTe film deposited. It was found that the film deposited consist of Cd, Te and Cu elements. XRD was used to investigate the full width at half maximum (FWHM) values of the thin films deposited. The results show that CdTe:Cu(2%) thin film has better crystallographic properties than CdTe thin film. The UV-Vis spectrometer was used to investigate the optical properties of thin films deposited. The transmittance spectra showed that transmittance of CdTe:Cu(2%) film is lower than CdTe film. It was found that the bandgap energy of CdTe and CdTe:Cu(2%) thin films of about 1.48 eV.

36 MATERIALS SCIENCE↗

Direct imaging of LaAlO{sub 3}/SrTiO{sub 3} nanostructures using piezoresponse force microscopy

The interface between LaAlO{sub 3} and TiO{sub 2}-terminated SrTiO{sub 3} can be switched between metastable conductive and insulating states using a conductive atomic force microscope probe. Determination of the nanoscale dimensions has previously required a destructive readout (e.g., local restoration of an insulating state). Here it is shown that high-resolution non-destructive imaging of conductive nanostructures can be achieved using a specific piezoresponse force microscopy (PFM) technique. Images of conductive and insulating nanoscale features are achieved with feature sizes as small as 30 nm. The measured nanowire width from PFM is well correlated with those obtained from nanowire erasure.

36 MATERIALS SCIENCE↗

Enhanced light scattering in Si nanostructures produced by pulsed laser irradiation

An innovative method for Si nanostructures (NS) fabrication is proposed, through nanosecond laser irradiation (λ = 532 nm) of thin Si film (120 nm) on quartz. Varying the laser energy fluences (425–1130 mJ/cm{sup 2}) distinct morphologies of Si NS appear, going from interconnected structures to isolated clusters. Film breaking occurs through a laser-induced dewetting process. Raman scattering is enhanced in all the obtained Si NS, with the largest enhancement in interconnected Si structures, pointing out an increased trapping of light due to multiple scattering. The reported method is fast, scalable and cheap, and can be applied for light management in photovoltaics.

36 MATERIALS SCIENCE↗

Thermal stability and oxidation of layer-structured rhombohedral In{sub 3}Se{sub 4} nanostructures

The thermal stability and oxidation of layer-structured rhombohedral In{sub 3}Se{sub 4} nanostructures have been investigated. In-situ synchrotron X-ray diffraction in a sealed system reveals that In{sub 3}Se{sub 4} has good thermal stability up to 900 °C. In contrast, In{sub 3}Se{sub 4} has lower thermal stability up to 550 or 200 °C when heated in an atmosphere flushed with Ar or in air, respectively. The degradation mechanism was determined to be the oxidation of In{sub 3}Se{sub 4} by O{sub 2} in the heating environment. This research demonstrates how thermal processing conditions can influence the thermal stability of In{sub 3}Se{sub 4}, suggesting that appropriate heating environment for preserving its structural integrity is required.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Note: Long-range scanning tunneling microscope for the study of nanostructures on insulating substrates

The scanning tunneling microscope (STM) is a powerful tool for studying the electronic properties at the atomic level, however, it is of relatively small scanning range and the fact that it can only operate on conducting samples prevents its application to study heterogeneous samples consisting of conducting and insulating regions. Here we present a long-range scanning tunneling microscope capable of detecting conducting micro and nanostructures on insulating substrates using a technique based on the capacitance between the tip and the sample and performing STM studies.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Efficient spin transfer torque in La{sub 2/3}Sr{sub 1/3}MnO{sub 3} nanostructures

We carry out low temperature magnetotransport measurements on nanostructured La{sub 2/3}Sr{sub 1/3}MnO{sub 3} wires to study the interaction between spin-polarized current and magnetization in this half metallic material. We selectively position domain walls by applying external fields. The domain wall resistance is found to be positive, in contrast to conventional 3d metals. The depinning field is reduced when current pulses are injected into the wire. By comparing measurements for both current polarities, we can disentangle heating and spin transfer torque effects. The determined spin transfer torque efficiency is of the order of 4 × 10{sup −14} Tm{sup 2}/A, which is significantly higher than in permalloy.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Focused ion beam high resolution grayscale lithography for silicon-based nanostructures

Nanofabrication techniques providing a fine control over the profile of silicon structures are of great importance for nanophotonics, plasmonics, sensing, micro- and nano fluidics, and biomedical applications. We report on the applicability of focused ion beam for the fine grayscale lithography, which yields surface profiles that are customized at nanoscale. The approach is based on a correlation between the ion beam irradiation dose of inorganic resist and the mask etching rate in the reactive ion etching. An exceptional property of this method is the number of gray tones that are not limited by the resist characteristics. We apply the process to fabricate unique periodic nanostructures with a slope angle varying across the structure and a period as small as 200 nm.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Role of size and defects in ultrafast broadband emission dynamics of ZnO nanostructures

As wide bandgap materials are nanostructured for optoelectronics and energy technologies, understanding how size and defects modify the carrier dynamics becomes critical. Here, we examine broadband ultraviolet-visible subpicosecond emission dynamics of prototypical ZnO in bulk, nanowire and nanosphere geometries. Using a high-sensitivity transient emission Kerr-based spectrometer, we probe exciton dynamics in the low fluence regime to determine how defects states impact thermalization and recombination rates. In contrast to steady-state measurements, we transiently identify low-energy emission features that originate from localized excitonic states rather than mid-gap states, characterized by distinct recombination kinetics, and correlate to longer thermalization times. These states are critical for understanding the overall excited state lifetime of materials in this size regime, where crystallinity rather than dimensionality plays a primary role in dictating recombination dynamics.

36 MATERIALS SCIENCE↗

Mesoporous Co{sub 3}O{sub 4} nanostructured material synthesized by one-step soft-templating: A magnetic study

A combined magnetization and zero-field {sup 59}Co spin-echo nuclear magnetic resonance (NMR) study has been carried out on one member of a recently developed class of highly ordered mesoporous nanostructured materials, mesoporous Co{sub 3}O{sub 4} (designated UCT-8, University of Connecticut, mesoporous materials). The material was synthesized using one-step soft-templating by an inverse micelles packing approach. Characterization of UCT-8 by powder x-ray diffraction and electron microscopy reveals that the mesostructure consists of random close-packed Co{sub 3}O{sub 4} nanoparticles ≈ 12 nm in diameter. The N{sub 2} sorption isotherm for UCT-8, which is type IV with a type H1 hysteresis loop, yields a 134 m{sup 2}/g BET surface area and a 7.7 nm BJH desorption pore diameter. The effect of heat treatment on the structure is discussed. The antiferromagnetic Co{sub 3}O{sub 4} nanoparticles have a Néel temperature T{sub N} = 27 K, somewhat lower than the bulk. A fit to the Curie-Weiss law over the temperature range 75 K ≤ T ≤ 300 K yields an effective magnetic moment of μ{sub eff} = 4.36 μ{sub B} for the Co{sup 2+} ions, indicative of some orbital contribution, and a Curie-Weiss temperature Θ = −93.5 K, consistent with antiferromagnetic ordering. The inter-sublattice and intra-sublattice exchange constants for the Co{sup 2+} ions are J{sub 1}/k{sub B} = (−)4.75 K and J{sub 2}/k{sub B} = (−)0.87 K, respectively, both corresponding to antiferromagnetic coupling. The presence of uncompensated surface spins is observed below T{sub N} with shifts in the hysteresis loops, i.e., an exchange-bias effect. The {sup 59}Co NMR spectrum for UCT-8, which is attributed to Co{sup 2+} ions at the tetrahedral A sites, is asymmetrically broadened with a peak at ≈55 MHz (T = 4.2 K). Since there is cubic symmetry at the A-sites, the broadening is indicative of a magnetic field distribution due to the uncompensated surface spins. The spectrum is consistent with antiferromagnetically ordered particles that are nanometer in size and single domain.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Spaser based on Fano resonance in a rod and concentric square ring-disk nanostructure

This paper reports a spaser based on Fano resonance of a plasmonic nanostructure consisting of a rod and concentric square ring-disk structure coated with a layer of gain media. The amplification of the dark quadrupolar mode at the Fano resonance wavelength causes the spaser with a high Purcell factor of 3.24 × 10{sup 7}, a high signal to noise ratio of 4.4 × 10{sup 6}, and a lower threshold of 0.02086. These significant optical properties are attributed to the greatly enhanced spontaneous emission and depressed radiation loss supported by the strong localized dark mode at the Fano resonance wavelength.

77 NANOSCIENCE AND NANOTECHNOLOGY↗