Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Large-scale Testing”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,333 records · Page 74

Inpainting radar missing data regions with deep learning

Abstract. Missing and low-quality data regions are a frequent problem for weather radars. They stem from a variety of sources: beam blockage, instrument failure, near-ground blind zones, and many others. Filling in missing data regions is often useful for estimating local atmospheric properties and the application of high-level data processing schemes without the need for preprocessing and error-handling steps – feature detection and tracking, for instance. Interpolation schemes are typically used for this task, though they tend to produce unrealistically spatially smoothed results that are not representative of the atmospheric turbulence and variability that are usually resolved by weather radars. Recently, generative adversarial networks (GANs) have achieved impressive results in the area of photo inpainting. Here, they are demonstrated as a tool for infilling radar missing data regions. These neural networks are capable of extending large-scale cloud and precipitation features that border missing data regions into the regions while hallucinating plausible small-scale variability. In other words, they can inpaint missing data with accurate large-scale features and plausible local small-scale features. This method is demonstrated on a scanning C-band and vertically pointing Ka-band radar that were deployed as part of the Cloud Aerosol and Complex Terrain Interactions (CACTI) field campaign. Three missing data scenarios are explored: infilling low-level blind zones and short outage periods for the Ka-band radar and infilling beam blockage areas for the C-band radar. Two deep-learning-based approaches are tested, a convolutional neural network (CNN) and a GAN that optimize pixel-level error or combined pixel-level error and adversarial loss respectively. Both deep-learning approaches significantly outperform traditional inpainting schemes under several pixel-level and perceptual quality metrics.

54 ENVIRONMENTAL SCIENCES↗

Toward large-scale building detection with convolutional neural network using remote sensing images

Establishing up-to-date nationwide building maps is essential to understand urban dynamics, such as estimating population and urban planning and many other applications. However, an efficient and effective solution is yet to be developed. In this paper, for the first time we evaluate three state-of-the-art CNNs for detecting buildings across entire United States using aerial images. The three CNN architectures, fully convolutional neural network, conditional random field as recurrent neural network, and SegNet, support semantic pixel-wise labeling and focus on capturing textural information at multi-scale. We use 1-meter resolution NAIP images as the test data set, and compare the detection results across the three methods. In addition, we propose to combine signed distance function labels with SegNet, which is the preferred CNN architecture identified by our extensive evaluations. The results are further improved in terms of precision, recall rate and the number of building detected. On average, model inference on test images is less than one minute for an area of size $\sim56$ $km^2$. With these promising results and the time required to process images, the framework offers great potential toward country scale building mapping with remote sensing imagery.

Yang, Lexie↗

Large-Scale Grid Models: Synthetic Data and Co-Simulation

Power grid modernization and wide-spread distributed energy resource (DER) integration are driving an explosion of interest in advanced algorithms and new optimization schemes. However, there has historically been a lack of open-access realistically sized and detailed datasets-particularly for the distribution system-and simulation tools able to model these systems. This talk will present recent advances with very large-scale (>>1M nodes) distribution data sets and the use of co-simulation to tractably model large integrated transmission-distribution grids and their interactions with new controls/optimization.

24 POWER TRANSMISSION AND DISTRIBUTION↗

FCP: A Fast and Scalable Data Copy Tool for High Performance Parallel File Systems

The design of HPC file and storage systems has largely been driven by the requirements on capability, reliability, and capacity. However, the convergence of large-scale simulations with big data analytics have put the data, its usability, and management back on the front and center position. One of the most common and time consuming data management tasks is the transfer of very large datasets within and across file systems.In this paper, we are introducing the FCP tool, a file system agnostic copy tool designed at the OLCF for scalable and high-performance data transfers between two file system endpoints. It provides an array of interesting features such as adaptive chunking, checksumming on the fly, checkpoint and resume capabilities to handle failures, and preserving stripe information for Lustre file system among others. It is currently available on the Titan supercomputer at the OLCF. Initial tests have shown that FCP has much better and scalable performance than traditional data copy tools and it was capable of transferring petabyte-scale datasets between two Lustre file systems.

Wang, Feiyi↗

Smart-DS: Synthetic Models for Advanced, Realistic Testing: Distribution Systems and Scenarios

The explosion of new ideas for distributed energy resources and advanced distribution grid algorithms faces a critical challenge: how can one effectively develop and evaluate these breakthrough technologies without an adequate set of power systems network, load, and resource data to test against? Today's open test systems, particularly for distribution systems, are tiny and incomplete; and though with enough effort, obtaining utility data under NDA can overcome scale challenges, the results can't be openly shared, preventing fair comparison. The Smart-DS project-led by NREL in partnership with MIT, Universidad Pontificia Comillas, CYME, and EDD-is working to overcome this gap by generating multiple large-scale, open, synthetic, distribution systems that are realistic but not real. These datasets go beyond a single medium voltage feeder (~1000 customers) to cover entire metropolitan areas and their surrounds with up to hundreds of feeders and millions of customers, complete with low voltage customer connections and high voltage sub-transmission. This scale allows adequate testing and analysis of not just local controls and advanced DERs, but also multiple substation interactions, optimized switching, full-scale distribution-OPF, and more. To accompany these datasets, the project is also building a rich set of scenario generation tools that can be used for distribution and transmission systems alike. This includes automated, spatially aware access to world-class, high-resolution solar, wind, and weather data: forward looking generation mixes: and highly configurable DER, load, climate, outage, control-scheme, and other scenarios. We will also highlight DiTTo, an exciting open-source, multi-way distribution dataset transformation tool for many-to-many format translation with scenario, merge/split, and many other manipulation capabilities.

DERs↗

Real-time Intrusion Detection for High-bandwidth Research Networks using Unsupervised Deep Learning

Nowadays, data generated by large-scale scientific experiments are on the scale of petabytes per month. These data are transferred through dedicated high-bandwidth networks across distributed collaboration sites for processing, storage, and analysis. Like general purpose networks, research networks experience attacks. However, monitoring traffic in such high-bandwidth network environments is challenging with conventional deep packet inspection (DPI)- based network intrusion detection systems (NIDS). Recently, machine learning (ML) algorithms have shown potential in detecting anomalous patterns with better generalizability and faster speed. Compared to the general purpose networks, traffic movement in research network is less volatile and more likely to benefit from the ML-based anomaly analysis. We present ThunderSecure, an efficient AI-powered system for detecting anomalies in 100G research networks. ThunderSecure implements a high-throughput packet processing infrastructure using multi-cores and GPUs. It takes time-series statistics from a variety of network measurements and uses 2D Convolutional Neural Network (CNN) to explore both spatial and temporal dependencies in network data stream. Patterns of science data traffic are learned with a one-class neural network, which blends an Adversarial Autoencoder (AAE) with Gaussian mixture density estimation. Testing traffic flows exhibiting significant deviations from the learned baseline of normality are marked as anomalies. We trained ThunderSecure on hundreds of billions of science data packets recorded from a 100G research network at Fermi National Accelerator Laboratory. The detection performance was evaluated on traffic captured from the same research network days and weeks after the training with different types of attack flows injected. To the best of our knowledge, this is the first ML work in the area of network anomaly detection that has been validated on such extreme scale datasets. Results show that ThunderSecure can recognize science data traffic that are captured long after the training and make nearly certain detection on those with anomalous flows injected, even in the case when the anomaly-to-normal mixing ratio is 0.1%.

Gong, Qian↗

Topical Report – Findings on Subtask 2.7 – Wet ESP and Aerosol Testing at Coal Creek Station

Growing concerns over the impact of CO 2 emissions from combustion sources on global climate change have prompted numerous research and development projects aimed at developing cost-effective technologies for CO 2 capture. One family of technologies being demonstrated at pilot and full scale globally is postcombustion carbon capture (PCCC) systems that employ amine-based solvents. The captured CO 2 can be compressed and permanently stored underground or used for enhanced oil recovery. The proximity of North Dakota’s lignite-fired fleet of power plants to potential CO 2 storage options creates a unique atmosphere for PCCC within the state. However, the unique components present in lignite flue gas present a challenge for large-scale PCCC at North Dakota power plants by contributing to aerosol formation. Aerosols can negatively impact the long-term performance of amine-based solvents for CO 2 capture. Amine-based solvents are volatile, and flue gas particulate provides nucleation sites where amine vapors can condense as aerosols. Because aerosols cannot be easily captured at the column outlet using conventional technologies, the amine-laden aerosols escape the system and lead to accelerated solvent losses. Moreover, particulate components can chemically react with amines to form degradation products that can permanently deactivate the amine, cause fouling, and lead to hazardous emissions. Many of the elements that have been shown to catalyze solvent degradation are present in lignite coals and can exacerbate solvent replacement economics. Understanding this issue is critical to the implementation of solvent-based CO 2 capture systems as applied to lignite-fired generation systems. The Energy & Environmental Research Center (EERC) designed and carried out this project to fully characterize aerosol behavior with various control technologies installed to better optimize aerosol mitigation technology for CO 2 capture. To meet the goal of this project, the following objectives were identified: Determine the effectiveness of a wet electrostatic precipitator (WESP) on mitigating formation of problematic aerosols at Great River Energy’s Coal Creek Station, upstream of the PCCC system. Determine the effectiveness of the Mitsubishi Heavy Industries (MHI) proprietary amine emission reduction unit (AERU) as a postcapture solvent recovery system for reducing aerosol emissions and extending solvent life downstream of the PCCC system. Determine the impact of aerosols on the efficiency and degradation products of both commercial and advanced solvents within the PCCC system. Work was conducted at Coal Creek Station Unit 1 using a slipstream of flue gas from the outlet of the plant’s flue gas desulfurization (FGD) unit. Flue gas was routed through a pilot-scale FGD unit to remove SO 2 to very low levels (~1 ppm) and then through a direct contact cooler (DCC) to further cool the gas and to remove moisture. The gas exiting the DCC was then optionally routed through a WESP before passing to the CO 2 absorber columns. The MHI solvent was used to scrub CO 2 from the slipstream through a set of two absorber columns. The rich solvent was regenerated in a stripper column by heating to drive off captured CO 2 . Flue gas exiting the absorber column was routed to MHI’s proprietary AERU to recover entrained solvent. The system operated using a catch-and-release method where the CO 2 was separated to provide data on the process, but the captured CO 2 was released back into the host site stack. Particulate was measured, collected, and analyzed from multiple locations throughout the pilot-scale system. Unlike the performance observed in prior work, the inlet FGD and DCC did not remove significant particulate matter from the flue gas. This appears to be due to a difference in the nature of the particulate. The DCC seemed to increase particulate size and count, most likely owing to water condensing onto the surfaces of fly ash particles. When the WESP was operated, it achieved >95% particulate capture. Very little particulate matter or indications of solvent were detected at the AERU outlet. When operating with advanced KS 21 solvent, the particulate material at the AERU outlet was even further decreased. Solvent analysis showed that some species derived from flue gas and ash were slowly concentrating in the solvent over the duration of the test. The levels observed were reported to be within expected ranges and were not of concern to MHI. A high-level techno-economic assessment of installing CO 2 capture at Coal Creek Station suggested that, when using a standard monoethanolamine (MEA)-based solution with simple heat integration, the energy penalty to net generation would be 34%. The bulk of this was due to steam losses for regenerating solvent, followed by parasitic electrical demand for CO 2 compression and then by increased parasitic load for pushing flue gas through the absorber column. These demands could be decreased with a more advanced solvent that exhibits lower heat of regeneration and lower pressure drop than does a simple MEA solution. Further energy could be saved with more thorough heat integration to recover useful energy from the steam used for solvent regeneration. Installing a WESP was predicted to increase the cost of electricity by nearly $5/MWh. This would become cost-effective if solvent losses were roughly 10 times the baseline estimate when not using a WESP but could be returned to baseline by installing the WESP. Piping CO 2 for storage in more favorable geology could help with carbon capture and storage economics. Although storing off-site would necessitate construction of a CO 2 transport pipeline, the cost of this pipeline might be more than offset by reducing the number of wells required, the depths of the wells required, and the electrical demand for the CO 2 compressor. Additional factors that favor off-site storage costs include smaller expected CO 2 plume sizes, which translates to less monitoring and fewer landowner agreements. More detailed assessment of the specific geology in the region under and around Coal Creek Station would be needed to accurately assess the costs and benefits of different storage site options. This subtask was cofunded through the Energy & Environmental Research Center–U.S. Department of Energy Joint Program on Research and Development for Fossil Energy-Related Resources Cooperative Agreement No. DE-FE0024233. Nonfederal funding was provided by the North Dakota Industrial Commission.

Strege, Joshua↗

Preliminary Monte Carlo and Thermal Hydraulic Analysis using a Hybrid ETF-Corrected-Diffusion Prediction Block

This paper builds upon previous work to accelerate the Picard iteration (PI) method typically applied for coupled Monte Carlo-Thermal hydraulic (MC-TH) solutions. Previously, the use of the generalized transfer functions (GTFs) to predict variation in macroscopic cross sections following a perturbation in TH properties was demonstrated for a subset of simple 3D problems. In addition, the reduced-order transport prediction block relied on the first order perturbation (FOP) method, which was shown to have computational overheads. Recent work replaced the FOP block with a 1-group nodal diffusion solver to eliminate these overheads. While the use of diffusion is desirable for large-scale problems, the new solver introduces significant homogenization error. This work aims to address this issue by using the Jacobian-Free Newton Krylov (JFNK) method to generate a set of super homogenization (SPH) factors to improve the accuracy of the diffusion solution. The SPH factors will be used in conjunction with an improved cross section prediction method – the expanded transfer function (ETF) method – to produce a highly accurate flux prediction for an axial 1D boiling water reactor (BWR) pincell following a large perturbation in moderator density. The ETF-corrected diffusion (ETF-CD) block is shown to be highly accurate for the 1D test case. Future work will investigate the accuracy of the method for a realistic 3D pressurized water reactor core.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

Chemistry and Engineering Aspects of the Application of Soluble Phosphates for Uranium Treatment in Groundwater - 17255

Treatment of uranium in groundwater is challenging because of the equilibrium partitioning of uranium between sorbed and aqueous phase complexes in mobile and immobile pore space. In situ groundwater treatment strategies for uranium hold promise because of their reliance on fundamentally altering uranium chemical speciation as well as aquifer geochemical conditions. For the last 30 years uranium in situ reductive precipitation has been the leading technology; however, there have been only a handful of large-scale applications. Recently, within the last 10 years, the application of soluble phosphates has been identified as a viable means of treating soluble uranium, while at the same time changing the balance in terms of the availability of sorbed/immobile uranium to re-mobilize. Uranium reacts with soluble phosphate to form a range of low-solubility uranium minerals; surface passivation can also result, limiting the availability of uranium for dissolution. Here we discuss the application of dissolved phosphate in a small-scale pilot test in a tailings pile. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Performance Evaluation of Decontamination Foam Containing Mesoporous silica NPs - 18453

It is necessary to secure decontamination technology that is easy to apply and minimizes the generation of secondary waste for large-scale equipment and large-area decontamination, which are difficult to be applied structurally when massive repairs or the decommissioning of a nuclear facility are required. In this respect, decontamination foam has a potentially wide application in the removal of contaminants from metallic walls, overhead surfaces, and elements of complex components and facilities. The decontamination efficiency can be enhanced by improving the contact time between the chemical decontamination agents and the contaminated surface through the introduction of stabilizers into the decontamination foam. In this study, the stability of a decontamination foam containing mesoporous silica NPs as a stabilizer and the decontamination performance of radioactive isotope contaminated specimens were evaluated. A process for waste liquid treatment after foam decontamination was also proposed. Decontamination performance tests using RI contaminated specimens were carried out in a decontamination foam prepared only with a solution containing only 1 wt% EM100 surfactant, and in a decontamination foam prepared with a solution containing 1 wt% EM100 surfactant and 1 wt% of various silica NPs. The stability of the decontamination foam was increased owing to the addition of various types of silica NPs. In particular, the liquid film thickness of the decontamination foam containing mesoporous silica NPs was the largest. As a result, the decontamination coefficient for RI contaminated specimens increased as the thickness of the foam liquid film increased owing to the longer contact time between the RI contaminated specimen and the chemical decontamination agent as the thickness of the foam liquid film increased. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Laboratory-Scale Melter Systems for Simulated and Real AP-105 Tank Waste - 19301

The Hanford Tank Waste Treatment and Immobilization Plant is being constructed to vitrify the nuclear waste stored in underground tanks on the Hanford Site. Through this conversion process, waste components become partitioned into one of two product streams: glass and off-gas, including condensate. A small-scale melter system is appropriate for analyzing the waste-to-glass process because it does not require the high volumes of input waste or resource commitment of a large-scale melter system while providing dynamic information that can be difficult to determine from batch reactions in a crucible system. A continuous laboratory-scale melter (CLSM) was sized to collect the relevant process and chemical information from obtainable volumes of Hanford tank waste and designed to operate with a continuous feeding process while periodically pouring glass product and collecting off-gas. Two CLSMs were constructed: one in a non-radioactive environment for processing waste simulants and another in a fume hood capable of handling radioactive material for processing actual Hanford tank waste. Multiple waste simulants were first tested in the non-radioactive CLSM to determine the processability and desired operating window for actual tank waste. About 12 liters of real waste from Hanford tank 241-AP-105 were received, filtered, and ion exchanged for removal of Cs-137. This quantity of waste was vitrified into 9.5 kg of glass product over the course of ∼15 hours of feeding to the CLSM. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Assessment of a Smoothed Particle Hydrodynamics Method for Thin Film on Textured Surfaces

A large number of previous studies suggest that the behavior of the near-wall liquid micro-layer plays a key role in boiling heat transfer and boiling crisis; see examples. The thin liquid layer interacts with heater surface and 'external' two-phase flow. The net effects of these interactions define the micro-hydrodynamics that leads to dryout. As a result, a good understanding of the thin-layer hydrodynamics is significant for the accurate prediction of CHF. Recently, with the advent of nanotechnology including micro-scale manufacturing, it becomes possible to perform high heat-flux boiling experiments with controlled surface conditions. Although many reports show rich observations about the effects of surface characteristics on CHF, physical mechanisms remain not fully understood. In order to have better understanding of the above phenomena, several computational models are developed, ranging from the lubrication theory to CFD methods. The former models are limited to one-dimensional formulation and unable to deal with the dry-out phenomena. It turns out that CFD methods have a greater potential for the mechanistic study of boiling. Towards the study objective, a particle-based CFD method called Smoothed Particle Hydrodynamics (SPH) is adopted. SPH is a Lagrangian particle method for solving systems of partial differential equations. Originally SPH is proposed for fluid dynamics in the context of astrophysical problems. Because mass and density are introduced during the particle approximation, SPH is also applied in fluid dynamic problems, where mass and density are important parameters to determine, without mass loss (a limitation of interface capturing schemes in mesh-based methods). Besides, geometrically complex and/or dynamic boundaries and interfaces can be handled without undue difficulty in SPH. Currently, most SPH simulations focus on large-scale scenarios (meter scale), like flooding and solitary wave. Also some works have been done with SPH in pore-scale. As for micro- or nano-scale simulation, people usually apply Dissipative Particle Dynamics (DPD) and Molecular Dynamics (MD) for particle-based simulation. Almost no work has been done on micro-scale with SPH, so assessments are needed to investigate the capability of SPH in application of micro-hydrodynamics. The Phenomena Identification and Ranking Table (PIRT) is applied to align application's technical requirements with associated physics and materials, models, simulation code capabilities and verification, validation and uncertainty quantification activities. The figures of merit are determined as: (1) Timing of micro-layer rewetting dry surface; (2) Effects of surface features. The corresponding key phenomena are determined as: (1) Hydrodynamics; (2) Interface Dynamics; (3) Energy; (4) Surface Effect. This study deals with isothermal scenario and no energy term is considered. Based on the current needs, a new SPH package, Micro-SPH, is compiled based on SPHysics with surface tension and wettability built in. Test cases are performed with Micro-SPH to assess the capability of SPH to each phenomenon identified. NEUTRINO with incompressible SPH solver is employed to investigate micro-fluid dynamics on a surface with uniformly distributed cylindrical pillars for application purposes. (authors)

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

Drop Analysis of Department of Energy Standard Canister with Fort Saint Vrain SNF

DOE manages over 300 types of SNF, most of which are located at the INL site. The Idaho Cleanup Project and INL are collaborating on the Road-Ready Capability Demonstration Project, which will develop and demonstrate the designs, technology, processes, and regulatory framework for packaging DOE-managed SNF at the INL site for ?road-ready dry storage?. ?Road-ready dry storage? is a SNF management concept where SNF is packaged into dry and sealed canisters, which are then placed in on-site storage in anticipation of later transportation. The forward-looking goal of the Demonstration is establishing the foundation for a large-scale road-ready dry storage program at the INL site. The Demonstration will first package Fort Saint Vrain SNF currently stored at INL into several DOE Standard Canisters. These Standard Canisters will then be loaded into another commercial transportation or storage containment system (e.g., storage cask or transportation package). The Standard Canister is a class of standardized canisters designed for containing the large variety of DOE-managed SNF during interim storage, transportation and/or disposal at a geological repository. One critical aspect of road-ready dry storage is the ability to license the DOE Standard Canisters and its associated transportation package to 10 CFR 71. Depending on the SNF and transportation strategy, the Standard Canisters may have to maintain structural integrity under normal conditions of transport and hypothetical accident scenarios (i.e., drop events). The Standard Canisters have been tested and analyzed under various SNF loading configurations and accident drop events in support of the Idaho Spent Fuel Facility and other DOE programs. However, no analysis has been completed to support the recent Demonstration. This analysis will consider the Ø0.5 m × 5.1 m Standard Canister under drop scenario(s) considered in previous INL tests and analyses, including the 9 m drop at 80 degree off vertical. However, this analysis will consider the more recent Fort Saint Vrain loading configurations proposed for the Demonstration. This analysis will performed using strain-based acceptance criteria established by the American Society of Mechanical Engineers Boiler and Pressure Vessel Code, Section III, Division 3. It will be compared to previous analyses and form the foundation of further formal calculations that will be used to support licensing efforts of the road-ready dry storage system at INL.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

νBDX: a Coherent Elastic Neutrino Nucleus Scattering (CEνNS) experiment at Jefferson Lab

Particle physics is an ever-changing field seeking to explain phenomena that lie at the limits of our current knowledge. Among discovered and hypothesized interactions, Coherent Elastic Neutrino-Nucleus Scattering (CE?NS) stands out as a fascinating and elusive phenomenon, offering a unique window into the nature of neutrinos and their interactions with matter. CE?NS, a process predicted by the Standard Model, represents one of the subtle ways in which neutrinos can interact with atomic nuclei. Unlike other neutrinonucleus interactions, CE?NS occurs coherently, meaning that the entire nucleus collectively responds to the neutrino-mediated weak force, resulting in small energy transfers to the nucleus as a whole. The extremely rare nature of CE?NS events presents a formidable challenge to experimenters seeking to detect and study these interactions. Recent advances in detector technologies and the implementation of large-scale experiments, such as coherent neutrino scattering experiments at research facilities around the world, have opened up new avenues for exploring this elusive phenomenon. These experiments aim not only to observe CE?NS directly but also to extract valuable information on neutrino properties, nuclear structure, and potential deviations from the Standard Model. This thesis aims to study the feasibility of an experiment to study CE?NS at The Thomas Jefferson National Accelerator Facility, Newport News, VA, USA. This would be an experiment that exploits the production of neutrinos by an electron beam dumped on a thick target (the beam dump). The large quantity of neutrinos produced and their energy profile are well suited to the purpose of studying the CE?NS. In my thesis, I will start from previous studies on CE?NS and from theoretical considerations regarding the process, then quantify the expected events for a hypothetical experiment and possible backgrounds through simulations aimed at optimizing the geometry of the future detector. I will also show some tests on selected detector components that will be part of a first prototype.

Grazzi, Stefano↗

QFw: A Quantum Framework for Large-scale HPC Ecosystems

This work extends Quantum Framework (QFw) by integrating it with Northwest Quantum Simulator (NWQ-Sim) and by introducing a lightweight python library that allows multiple frontends (e.g., Qiskit) to interact with QFw. This extension enables QFw to flexibly decouple frontends from backends (e.g., NWQ-Sim). We demonstrate this capability by executing a Greenberger-Horne-Zeilinger (GHZ) circuit using Qiskit and Pennylane with NWQ-Sim and Tensor-Network Quantum Virtual-Machine (TN-QVM). QFw enables easy scaling to multiple nodes. We showcase this with scaling tests using GHZ with up to 32 qubits for different number of nodes on the Frontier supercomputer. And, to demonstrate the use of QFw for real world problems, we solve a metamaterial optimization problem, using a Quantum Approximate Optimization Algorithm (QAOA). We observe that QFw over NWQ-Sim marginally improves Qiskit-aer’s accuracy in reaching the lowest energy state. These additions to QFw prepare it to run hybrid applications in a hybrid resource environment since it treats actual quantum hardware and simulators alike.

Chundury, Srikar↗

DECADE+DES Y3 Weak Lensing Mass Map: A 13,000 deg$^2$ View of Cosmic Structure from 270 Million Galaxies

We present the largest galaxy weak lensing mass map of the late-time Universe, reconstructed from 270 million galaxies in the DECADE and DES Year 3 datasets, covering 13,000 square degrees. We validate the map through systematic tests against observational conditions (depth, seeing, etc.), finding the map is statistically consistent with no contamination. The large area covered by the mass map makes it a well-suited tool for cosmological analyses, cross-correlation studies and the identification of large-scale structure features. We demonstrate its potential by detecting cosmic filaments directly from the mass map for the first time and validating them through their association with galaxy clusters selected using the Sunyaev-Zeldovich effect from Planck and ACT DR6.

Gatti, M. [Chicago U., KICP] (ORCID:00000001613487↗

Initial Development of Fusion Magnet Simulation Capabilities for Performance and Safety Evaluation Using the MOOSE Framework

Fusion energy holds the promise of being a transformative technology as a carbon-neutral, sustainable source of energy. Whole device modeling and the development of fusion digital twins will be increasingly important for emerging fusion device concepts at both national laboratories and within the commercial fusion industry. However, meeting the challenge of whole device modeling of fusion energy devices requires robust, multiphysics, multiscale modeling and simulation technologies capable of running on large-scale supercomputers. Detailed analysis of individual systems at-scale is also required to ensure safe and efficient operation as well as provide the safety basis for future device designs and licensing activities. In a tokamak, toroidal and poloidal magnets confine and shape the fusion plasma to promote the fusion reaction. High plasma temperatures and high magnetic field requirements in modern design concepts (leading to high amounts of energy stored within each magnet) impose electrical, thermal, and mechanical loads on the magnet components, which in turn impacts the safety considerations of the magnet and their supporting systems. Idaho National Laboratory (INL) has a history of working in this space, including development and benchmarking of the Magnetic System Circuitry Analysis Program (MSCAP) and Magnet Arcing (MAGARC) codes to study magnet quench events; notably, MAGARC was used to study quenching during the ITER Engineering Design Activity. However, these legacy codes and capabilities are not parallel and scalable, and new tools are required for future advances in this area, which leads to the INL-developed Multiphysics Object-Oriented Simulation Environment (MOOSE) framework. Developed originally for fission reactor systems under United States Department of Energy, Office of Nuclear Energy modeling and simulation programs, the MOOSE framework has been well-suited to multiscale, multiphysics modeling and simulation needs for nuclear systems. The framework is open-source, well-tested, under continuous development and deployment, and developed to a Nuclear Quality Assurance, Level 1 software quality standard. MOOSE has also been used in the fusion space previously in several projects: INL’s Tritium Migration Analysis Program, Version 8 (TMAP8) for tritium migration, UK Atomic Energy Authority’s A Unified Resource for OpenMC (fusion) Reactor Applications (AURORA) code for fusion thermo-mechanical and neutronics analysis, and Argonne National Laboratory’s Cardinal for high-fidelity computational fluid dynamics and neutronics. However, to model superconducting magnets, several MOOSE enhancements are required: additions to the current MOOSE electromagnetic capabilities, new material libraries for superconductors of interest (such as YBCO), as well as fusion-specific models for thermo-mechanics. This talk will discuss initial development activities to build these capabilities in MOOSE, focusing on initial validation and benchmarking activities. Proposed coupling workflows and future work to support the simulation of fusion magnets and magnet structural assemblies for performance and safety evaluation in MOOSE will also be discussed.

70 - PLASMA PHYSICS AND FUSION TECHNOLOGY↗

FolpsD: combining EFT and phenomenological approaches for joint power spectrum and bispectrum analyses

We present a theoretical model for the power spectrum and bispectrum of galaxy clustering that exploits the complementarity between small-scale power spectrum information and large-scale bispectrum measurements. We extend the FOLPS code by combining its one-loop EFT galaxy power spectrum with a tree-level galaxy bispectrum projected onto the tripolar spherical harmonics (Sugiyama) basis. To access additional small-scale information, we also consider a line-of-sight damping factor in both statistics, mirroring approaches commonly used in studies of redshift-space distortions. We test the model using DESI DR2 galaxy mocks. Even without damping, the joint analysis of the EFT power spectrum and bispectrum significantly improves constraints and reduces parameter degeneracies relative to power spectrum analyses alone. For LRG-like samples, including the damping further extends the range beyond $k\sim 0.3 \,h \text{Mpc}^{-1}$ in the power spectrum and $k \sim 0.24 \,h \text{Mpc}^{-1}$ in the bispectrum without introducing statistically significant parameter biases. This leads to up to $\sim 30\%$ tighter constraints on $A_s$ and $ω_{cdm}$. For low signal-to-noise tracers such as QSOs, however, the damping parameters are weakly constrained and can absorb noise fluctuations, leading to shifts in inferred parameters. Similar limitations may arise in models where cosmological information is encoded in power-spectrum shape features degenerate with the damping, such as scenarios with massive neutrinos. In contrast, for $w_0w_a$CDM we obtain $15\%$ and $21\%$ tighter constraints on $w_0$ and $w_a$, respectively, yielding a deviation from constant dark energy at slightly more than the $1σ$ level using full-shape information alone. The code is publicly available at https://github.com/cosmodesi/FolpsD

Bansal, P. [Michigan U., MCTP; Michigan U.] (ORCID↗