Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “LEVITATION”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,333 records · Page 74

Next-Generation Flywheel Energy Storage: Development of a 100 kWh/100 kW Flywheel Energy Storage Module

GRIDS Project: Beacon Power is developing a flywheel energy storage system that costs substantially less than existing flywheel technologies. Flywheels store the energy created by turning an internal rotor at high speeds—slowing the rotor releases the energy back to the grid when needed. Beacon Power is redesigning the heart of the flywheel, eliminating the cumbersome hub and shaft typically found at its center. The improved design resembles a flying ring that relies on new magnetic bearings to levitate, freeing it to rotate faster and deliver 400% as much energy as today’s flywheels. Beacon Power’s flywheels can be linked together to provide storage capacity for balancing the approximately 10% of U.S. electricity that comes from renewable sources each year.

ARPA-E↗

Study on Alternative Cargo Launch Options from the Lunar Surface

In the future, there will be a need for constant cargo launches from Earth to Mars in order to build, and then sustain, a Martian base. Currently, chemical rockets are used for space launches. These are expensive and heavy due to the amount of necessary propellant. Nuclear thermal rockets (NTRs) are the next step in rocket design. Another alternative is to create a launcher on the lunar surface that uses magnetic levitation to launch cargo to Mars in order to minimize the amount of necessary propellant per mission. This paper investigates using nuclear power for six different cargo launching alternatives, as well as the orbital mechanics involved in launching cargo to a Martian base from the moon. Each alternative is compared to the other alternative launchers, as well as compared to using an NTR instead. This comparison is done on the basis of mass that must be shipped from Earth, the amount of necessary propellant, and the number of equivalent NTR launches. Of the options, a lunar coil launcher had a ship mass that is 12.7% less than the next best option and 17 NTR equivalent launches, making it the best of the presented six options.

33 ADVANCED PROPULSION SYSTEMS↗

Magnetic bearing element with adjustable stiffness

A compact magnetic bearing element is provided which is made of permanent magnet discs configured to be capable of the adjustment of the bearing stiffness and levitation force over a wide range.

42 ENGINEERING↗

Passive magnetic bearing system

An axial stabilizer for the rotor of a magnetic bearing provides external control of stiffness through switching in external inductances. External control also allows the stabilizer to become a part of a passive/active magnetic bearing system that requires no external source of power and no position sensor. Stabilizers for displacements transverse to the axis of rotation are provided that require only a single cylindrical Halbach array in its operation, and thus are especially suited for use in high rotation speed applications, such as flywheel energy storage systems. The elimination of the need of an inner cylindrical array solves the difficult mechanical problem of supplying support against centrifugal forces for the magnets of that array. Compensation is provided for the temperature variation of the strength of the magnetic fields of the permanent magnets in the levitating magnet arrays.

42 ENGINEERING↗

Electrostatic stabilizer for a passive magnetic bearing system

Electrostatic stabilizers are provided for passive bearing systems composed of annular magnets having a net positive stiffness against radial displacements and that have a negative stiffness for vertical displacements, resulting in a vertical instability. Further embodiments are shown of a radial electrostatic stabilizer geometry (using circuitry similar to that employed in the vertical stabilizer). This version is suitable for stabilizing radial (lateral) displacements of a rotor that is levitated by annular permanent magnets that are stable against vertical displacements but are unstable against radial displacements.

30 DIRECT ENERGY CONVERSION↗

Electrostatic stabilizer for a passive magnetic bearing system

Electrostatic stabilizers are provided for passive bearing systems composed of annular magnets having a net positive stiffness against radial displacements and that have a negative stiffness for vertical displacements, resulting in a vertical instability. Further embodiments are shown of a radial electrostatic stabilizer geometry (using circuitry similar to that employed in the vertical stabilizer). This version is suitable for stabilizing radial (lateral) displacements of a rotor that is levitated by annular permanent magnets that are stable against vertical displacements but are unstable against radial displacements.

42 ENGINEERING↗

Halbach-array radial stabilizer for a passive magnetic bearing

A radial stabilizer is provided for stabilizing levitation passive bearing elements against lateral displacements. The stabilizer provides a means to introduce anisotropy in the radial stiffness of the stabilizer. The presence of anisotropic stiffness has a strongly stabilizing effect on whirl-type rotor-dynamic instabilities. The stabilizer design also provides a means for continuously monitoring the state of health of the rotor by signaling the onset of changes of balance that would be expected to precede any major failure.

42 ENGINEERING↗

Search for charged-lepton flavor violation in Υ(2S) → ℓ∓τ± (ℓ = e, μ) decays at Belle

Abstract We report a search for the charged-lepton flavor violation in Υ(2S) →ℓ ∓ τ ± (ℓ=e, μ) decays using a 25 fb −1 Υ(2S) sample collected by the Belle detector at the KEKBe + e − asymmetric-energy collider. We find no evidence for a signal and set upper limits on the branching fractions ($$ \mathcal{B} $$ B ) at 90% confidence level. We obtain the most stringent upper limits:$$ \mathcal{B} $$ B (Υ(2S)→ μ ∓ τ ± )<0.23×10 −6 and$$ \mathcal{B} $$ B (Υ(2S)→ e ∓ τ ± )<1.12×10 −6 .

Physics↗

Measurement of the e + e - → $ {B}_s^0{\overline{B}}_s^0X $ cross section in the energy range from 10.63 to 11.02 GeV using inclusive $ {D}_s^{+} $ and D 0 production

We report the first measurement of the inclusive e + e - → $b\bar{b}$ → D$^±_s$ X and e + e - → $b\bar{b}$ → D 0 / $\overline{D}^0$ X cross sections in the energy range from 10.63 to 11.02 GeV. Based on these results, we determine σ(e + e - → ${B}_s^0{\overline{B}}_s^0$ X) and σ(e + e - → $B\overline{B}$ X) in the same energy range. We measure the fraction of ${B}_s^0$ events at Υ(10860) to be f s = (${22.0}_{-2.1}^{+2.0}$)%. We determine also the ratio of the ${B}_s^0$ inclusive branching fractions $\mathcal{B}$(${B}_s^0$ → D 0 / $\overline{D}^0$X)/$\mathcal{B}$(${B}_s^0$ → ${D}_s^{\pm }$X) = 0.416 ± 0.018 ± 0.092. The results are obtained using the data collected with the Belle detector at the KEKB asymmetric-energy e + e - collider.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Stereoinversion in the diastereoselective acylation of benzoxazine derivatives with 2-aryloxypropionyl chlorides

A comparative study of the kinetic resolution of racemic derivatives of 3,4-dihydro-3-methyl-2H-[1,4]benzoxazine using racemic 2-aryloxypropionyl chlorides was performed. It was found that the acylation of racemic amines with racemic 2-(1-naphthyloxy)propionyl chloride leads to amides enriched with (3R*,2′R*)-diastereomers, while the acylation with 2-phenoxypropionyl chloride gives predominantly (3R*,2′S*)-amides. Quantum chemical modeling of the process of kinetic resolution at the COSMO-CH{sub 2}Cl{sub 2}-B3LYP-D3-gCP/def2-TZVP//B3LYP-D3-gCP/def2-SVP level of theory was performed. The computational results are in a good agreement with the experimental data.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Interactions of a potent cyclic peptide inhibitor with the light chain of botulinum neurotoxin A: insights from x-ray crystallography

The seven antigenically distinct serotypes (A to G) of botulinum neurotoxin (BoNT) are responsible for the deadly disease botulism. BoNT serotype A (BoNT/A) exerts its lethal action by cleaving the SNARE protein SNAP-25, leading to inhibition of neurotransmitter release, flaccid paralysis and autonomic dysfunction. BoNTs are dichain proteins: the heavy chain is responsible for neurospecific binding, internalization and translocation, and the light chain is responsible for substrate cleavage. Because of their extreme toxicity and prior history of weaponization, the BoNTs are considered to be potential bioterrorism agents. No post-symptomatic therapeutic interventions are available for BoNT intoxication other than critical care; therefore it is imperative to develop specific antidotes against this neurotoxin. To this end, a cyclic peptide inhibitor (CPI-1) was synthesized and found to inhibit BoNT/A light chain (Balc) with high affinity. When tested in a cell-free Förster resonance excitation transfer (FRET) assay, CPI-1 was found to have a K i of 13.9 nM using full-length Balc448 and 42.1 nM using a truncated crystallizable form of light chain (Balc424). Co-crystallization of CPI-1 with Balc424 revealed that in the Balc-CPI-1 complex, the inhibitor adopts a helical conformation, occupies a high percentage of the active site cavity and interacts in an amphipathic manner with critical active site residues. The data suggest that CPI-1 prevents SNAP-25 from accessing the Balc active site by blocking both the substrate binding path at the surface and the Zn 2+ binding region involved in catalysis. This is in contrast to linear peptide inhibitors described to date which block only the latter

59 BASIC BIOLOGICAL SCIENCES↗

Towards new zero-thermal-expansion materials: Li-free quartz solid solutions stuffed with transition metal cations

Stuffed aluminosilicate quartz solid solutions (Qss) represent the main functional component of state-of-the-art zero-thermal-expansion glass-ceramics. For the first time, we present the synthesis of Li-, Mg- and Zn-free Qss solely stuffed with transition metal cations (Fe 2+ , Ni 2+ , Co 2+ ); partial Li + co-doping enables also significant Mn 2+ incorporation. Further, they were obtained by glass powder crystallization; Qss crystals exhibit compositionally tunable coefficients of thermal expansion (CTEs), from - 2 × 10 -6 K -1 to ~10 × 10 -6 K -1 in the range 30–300 °C. Co 2+ -bearing crystals exhibit the closest-to-zero CTE value (0.2 ×10 -6 K -1 ) and the most isotropic behavior in the whole Qss family, opening up new perspectives for the development of Li-free low-expansion materials. From a structural point of view, we identified the unit cell volume (and not the pseudo-hexagonality of the aluminosilicate framework) as the key structural parameter leading to low or negative CTEs in Qss, with a linear correlation extending to non-stuffed non-silicate quartz-like phases.

36 MATERIALS SCIENCE↗