Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “INTERPRETATION”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,333 records · Page 74

Issues in the analysis and interpretation of cyclotron lines in gamma-ray bursts

With reference to recent gamma-ray burst observations by the detector on the Ginga satellite, the importance of the observation of multiple harmonics for extracting physical parameters from cyclotron lines is demonstrated. The cyclotron line signature of neutron star rotation is described, and possible observational evidence is discussed.

Lamb, D. Q.↗

Interpretation of lightcurves of atmosphereless bodies. I - General theory and new inversion schemes

Theoretical models of light-curve inversion that can be used in photomorphography, i.e., determination of the 3D shape and/or the light-scattering behavior of the surface of a body from disk-integrated photometry. These methods can be applied to atmosphereless bodies, mainly asteroids and planetary satellites, in the solar system. The inversion comprises three steps. First, a function containing data on the shape and the albedo variegation of an asteroid is determined. In the second step, separate expressions for the inverse of the Gaussian curvature and the albedo distribution are derived from the information obtained in the first step. In the third step, the nontrivial problem of determining the radius vector of the surface from the Gaussian curvature is solved by using iterative optimization procedures.

Kaasalainen, M.↗

Interpretation of waverider performance data using computational fluid dynamics

A computational study was conducted to better understand experimental results obtained from wind tunnel tests of a Mach 4 waverider model and a comparative reference configuration. The experimental results showed that the performance of the reference configuration was slightly better than that of the waverider model. These results contradict waverider design theory, which suggests that a waverider optimized for maximum lift-to-drag should provide better performance than any other non-waverider configuration at a given design point, especially at hypersonic speeds. The computational results showed that the predicted surface pressure values and the integrated lift and drag coefficients from the pressure distributions were much lower for the reference model than for the flat-top model, due to the reference model bottom surface having a slight expansion. The lift-to-drag ratios for the flat-top model were higher due to a relatively low drag for the same amount of lift. These results indicate that the performance advantage of the reference model was due to the shape of the bottom surface and not due to the flat top surface. The results also showed that the reference model exhibited the same shock attachment characteristics as the waverider because the planform shapes were identical. CFD predictions show that the planform shape gives the waverider an advantage in performance over conventional hypersonic vehicles and that altering the bottom surface of a waverider does not cause significant performance degradation.

Cockrell, Charles E., Jr.↗

Estimators of primary production for interpretation of remotely sensed data on ocean color

The theoretical basis is explained for some commonly used estimators of daily primary production in a vertically uniform water column. These models are recast into a canonical form, with dimensionless arguments, to facilitate comparison with each other and with an analytic solution. The limitations of each model are examined. The values of the photoadaptation parameter I(k) observed in the ocean are analyzed, and I(k) is used as a scale to normalize the surface irradiance. The range of this scaled irradiance is presented. An equation is given for estimation of I(k) from recent light history. It is shown how the models for water column production can be adapted for estimation of the production in finite layers. The distinctions between model formulation, model implementation and model evaluation are discussed. Recommendations are given on the choice of algorithm for computation of daily production according to the degree of approximation acceptable in the result.

Platt, Trevor↗

The New Interpretation of the Laws of Air Resistance

A closer examination of Newton's formula for air resistance shows that it is well to consider the air as an ordinary fluid, and, indeed for most of the velocities considered, as a non-compressible fluid, so long as the dimensions of the moving body are large in comparison with the mean free path of the particles of air.

RESISTANCE, AIR↗

Lineament analysis and tectonic interpretation for the Tharsis region

The Tharsis region of Mars is critical to any study of Martian tectonics. This region (65 N and 65 S latitude; 45 W to 157.5 W longitude) is characterized by an asymmetrical dome-shaped topographic high approximately 8000 km across. Affecting over 25 percent of the surface area, this region has been the center of most of the major tectonic and volcanic activity that has taken place on the Martian surface. Lineament studies are the primary tool available for studying tectonic processes on terrestrial planets such as Mars. At least three major lineament systems can be delineated in the Tharsis region; north-south and east-west trending lineament systems are superimposed on an older northwest trending lineament system. Four centers of uplift have been identified based on the occurrence of radial fracture patterns. Preliminary results indicate that the formation of the Tharsis Dome may not have resulted from a single uplift event, but may instead have resulted from as many as four uplift events. The northwest trending fracture may represent a pre-existing zone of weakness which contributed to the early formation of the Tharsis Dome. The 1:2,000,000 scale photo mosaic maps of Mars were examined and lineaments were identified. The end points of each lineament were measured and recorded in an X-Y reference coordinate frame.

Anderson, Robert↗

Interpretation of lunar and planetary electromagnetic scattering using the full wave solutions

Bistatic radar experiments carried out during the Apollo 14, 15, and 16 missions provide a very useful data set with which to compare theoretical models and experimental data. Vesecky, et al. report that their model for near grazing angles compares favorably with experimental data. However, for angles of incidence around 80 degrees, all the analytical models considered by Vesecky, et al. predict values for the quasi-specular cross sections that are about half the corresponding values taken from the Apollo 16 data. In this work, questions raised by this discrepancy between the reported analytical and experimental results are addressed. The unified full wave solutions are shown to be in good agreement with the bistatic radar taken during Apollo 14 and 16 missions. Using the full wave approach, the quasi-specular contributions to the scattered field from the large scale surface roughness as well as the diffuse Bragg-like scattering from the small scale surface roughness are accounted for in a unified self-consistent manner. Since the full wave computer codes for the scattering cross sections contain ground truth data only, it is shown how it can be reliably used to predict the rough surface parameters of planets based on the measured data.

Bahar, E.↗

Petrography and preliminary interpretations of the crystalline breccias from the Manson M-1 core

The M-1 core was drilled on the eastern edge of the central uplift within the Manson Impact Structure in Iowa. The lower 107.9 m of the core consists of crystalline breccias. Twelve intervals of thin sections from this core have been studied for preliminary discussion. The breccias are divided into three units by matrix size and abundance. Unit 1 is characterized by a high volume fraction of matrix, and a decreasing proportion of matrix with depth. This matrix is nearly isotropic and consists of grains less than 0.005 to less than 0.02 mm in length. The matrix between 112 and 146 meters depth consists of a crystalline intergrowth of felsic and opaque minerals with or without chlorite. This was the hottest section of the core after impact, and may have undergone high temperature metamorphic recrystallization. Unit 2 is transitional between units 1 and 3, and is delineated by a rapid increase in grain size to .01-.04 mm and a decrease in matrix abundance to 10 percent. Unit 3 has a coarse, often porous matrix, whose abundance changes from about 10 percent at the top to about 2 percent at the base. Grain sizes range from 0.01-0.1 mm over this interval and coarsen with depth. Changes in the character of the matrix as well as the changes in clast lithology and abundance outlined below suggest that unit 3 is in-situ brecciated basement with injected melt and shale fragments; unit 1 is a crater veneer deposit consisting of transported basement materials and unit 2 is a mixed zone between units 1 and 3.

Bell, M. S.↗

Analysis and interpretation of high energy cosmic rays measured on Spacelab-2

Under the contract with NASA's Marshall Space Flight Center (NAS8-32828) the University of Chicago designed, built and delivered the CRN instrument for flight in the Spacelab-2 configuration. The instrument was flown from July 29 to August 5, 1985 on the Space Shuttle Challenger. The performance of our experiment was entirely successful and we reached our scientific goals. The contract included funds for the first year of data analysis. Further data analysis was carried out under the grant NAGW-1311 which ran from January 1, 1988 through December 31, 1990, and on which we report. The final products of this grant are the published scientific papers with the results from the experiment. We attach copies of the papers that have been published to date, and which we consider the most important part of this report. However, in order to put them into context we give a brief account of the project as a whole for which the grant covered the final phase.

Mueller, Dietrich↗

Identification and interpretation of patterns in rocket engine data

A prototype software system was constructed to detect anomalous Space Shuttle Main Engine (SSME) behavior in the early stages of fault development significantly earlier than the indication provided by either redline detection mechanism or human expert analysis. The major task of the research project is to analyze ground test data, to identify patterns associated with the anomalous engine behavior, and to develop a pattern identification and detection system on the basis of this analysis. A prototype expert system which was developed on both PC and Symbolics 3670 lisp machine for detecting anomalies in turbopump vibration data was checked with data from ground tests 902-473, 902-501, 902-519, and 904-097 of the Space Shuttle Main Engine. The neural networks method was also applied to supplement the statistical method utilized in the prototype system to investigate the feasibility in detecting anomalies in turbopump vibration of SSME. In most cases the anomalies detected by the expert system agree with those reported by NASA. On the neural networks approach, the results are given the successful detection rate higher than 95 percent to identify either normal or abnormal running condition based on the experimental data as well as numerical simulation.

Lo, C. F.↗

Physical interpretation and development of ultrasonic nondestructive evaluation techniques applied to the quantitative characterization of textile composite materials

In this Progress Report, we describe our current research activities concerning the development and implementation of advanced ultrasonic nondestructive evaluation methods applied to the characterization of stitched composite materials and bonded aluminum plate specimens. One purpose of this investigation is to identify and characterize specific features of polar backscatter interrogation which enhance the ability of ultrasound to detect flaws in a stitched composite laminate. Another focus is to explore the feasibility of implementing medical linear array imaging technology as a viable ultrasonic-based nondestructive evaluation method to inspect and characterize bonded aluminum lap joints. As an approach to implementing quantitative ultrasonic inspection methods to both of these materials, we focus on the physics that underlies the detection of flaws in such materials.

Miller, James G.↗

Lava flow-field morphological classification and interpretation: Examples from Venus

Recent analyses suggest that thermal constraints will act to limit the maximum length of an advancing lava flow being fed at a given volume or mass effusion rate from a vent. These constraints can be characterized through the Gratz number, which has a large value at the vent and decreases down flow; under a wide range of conditions, motion apparently ceases when the Gratz number has decreased to a value close to 300. In cooling-limited flows, effusion from the vent should be steady; the flow front thickens, eventually stops due to this cooling, and the central channel does not drain. If the vent remains active, a break-out flow will form from some point on the margin of the initial flow unit. If flows on planetary surfaces can be shown to be cooling limited, eruption rates can be estimated. In this analysis, we illustrate the morphological characteristics of various flow configurations, and we describe the application of these concepts to a flow length histogram for a hypothetical flow field and then apply this to an example on Venus.

Head, J. W.↗