Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “IMPLANTS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,333 records · Page 74

Beam Angular Divergence Effects in Ion Implantation

An important difference between monomer ion beams and heavy molecular beams is a significant reduction in beam angular divergence and increased on-wafer angular accuracy for molecular beams. This advantage in beam quality stems from a reduction in space-charge effects within the beam. Such improved angular accuracy has been shown to have a significant impact on the quality and yield of transistor devices [1,12]. In this study, B{sub 18}H{sub x}{sup +} beam current and angular divergence data collected on a hybrid scanned beam line that magnetically scans the beam across the wafer is presented. Angular divergence is kept below 0.5 deg from an effective boron energy of 200 eV to 3000 eV. Under these conditions, the beam current is shown analytically to be limited by space charge below about 1 keV, but by the matching of the beam emittance to the acceptance of the beam line above 1 keV. In addition, results of a beam transport model which includes variable space charge compensation are presented, in which a drift mode B{sub 18}H{sub x}{sup +} beam is compared to an otherwise identical boron beam after deceleration. Deceleration is shown to introduce significant space-charge blow up resulting in a large on-wafer angular divergence. The divergence effects introduced by wafer charging are also discussed.

36 MATERIALS SCIENCE↗

Surface Protection and Improved Performance of Satellite Components as well as Mitigation of Space Environmental Pollution by Plasma Ion Implantation

Three plasma processing systems based on PII technique have been used in the improvement of surface properties of different materials important for aerospace and space applications. Metal plasma PII of Al and Mg was used for surface protection of polymers used in space such as Kapton, Mylar and polyethylene. Al alloys were treated with nitrogen PII for improved resistance to corrosion aiming at aerospace applications. A rigid polymer UHMWPE was also treated in a nitrogen PII to produce a protective layer with DLC. Although not very light, SS304 stainless steel components are being used in a imaging camera in space, and some components made of this material showed endurance to vibration tests after nitrogen PII, therefore being qualified for on-board application.

36 MATERIALS SCIENCE↗

Crystallization of sputtered-deposited and ion implanted amorphous Ge{sub 2}Sb{sub 2}Te{sub 5} thin films

X-ray diffraction and transmission electron microscopy have been utilized to measure the ion irradiation-induced modification in amorphous Ge{sub 2}Sb{sub 2}Te{sub 5} thin films. The isothermal crystallization of sputtered-deposited and Sb{sup +} ion irradiated amorphous samples has been studied, focusing on the evolution of the microstructure during the initial stage of the transformation. In both samples, the amorphous to crystal transition occurs through the nucleation of face centered cubic (fcc) crystal domains at the film surface. A fast bidimensional growth of the crystalline nuclei in the sputtered-deposited films occurs by the generation of transrotational grains. The lattice parameter decreases as the crystalline fraction increases above 80%, and it approaches the fcc bulk value at the end of the transformation. Ion irradiation produces a densification of the deposited amorphous film (approx4% vertical shrinkage measured by atomic force microscopy) and an enhancement of the crystallization rate. Even in the irradiated amorphous, the nucleation occurs at the film surface and proceeds by the growth of the grains through the thickness of the layer although the density of the transrotational grains is strongly reduced with respect to the unirradiated amorphous. A link between the ion beam induced densification and the reduction of transrotational grains is proposed.

36 MATERIALS SCIENCE↗

Formation and incorporation of SiF{sub 4} molecules in F-implanted preamorphized Si

The local structure of fluorine incorporated in crystalline silicon following solid phase epitaxial regrowth was investigated by means of x-ray absorption spectroscopy at the F K-edge. We clearly demonstrate that most F is found in SiF{sub 4} molecules in the crystalline matrix. A kinetic pathway, which explains our observation and which is also able to rationalize previous results in a common and coherent framework, is proposed.

36 MATERIALS SCIENCE↗

ELECTROCHEMICAL IMPEDANCE ANALYSIS OF beta-TITANIUM ALLOYS AS IMPLANTS IN RINGERS LACTATE SOLUTION

Commercially pure titanium and two beta-titanium alloys, TNZT and TMZF, have been characterized using various electrochemical techniques for their corrosion behavior in Ringers lactate solution. The variation of corrosion potential and solution pH with time has been discussed. Electrochemical Impedance Spectroscopy has been used to fit the results into a circuit model. The stability of the oxides formed on the surface of these alloys has been correlated with impedance phase angles. Cyclic Potentiodynamic Polarization has been used to compute the corrosion parameters for the alloys. TMZF is found to be a better beta-alloy as compared to TNZT.

36 MATERIALS SCIENCE↗

Upgraded vacuum arc ion source for metal ion implantation

Vacuum arc ion sources have been made and used by a large number of research groups around the world over the past twenty years. The first generation of vacuum arc ion sources (dubbed ''Mevva,'' for metal vapor vacuum arc) was developed at Lawrence Berkeley National Laboratory in the 1980s. This paper considers the design, performance parameters, and some applications of a new modified version of this kind of source which we have called Mevva-V.Ru. The source produces broad beams of metal ions at an extraction voltage of up to 60 kV and a time-averaged ion beam current in the milliampere range. Here, we describe the Mevva-V.Ru vacuum arc ion source that we have developed at Tomsk and summarize its beam characteristics along with some of the applications to which we have put it. We also describe the source performance using compound cathodes.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

High-energy metal ion implantation for reduction of surface resistivity of alumina ceramic

In this work, the possibility to increase the surface conductivity of ceramic insulators through their treatment with accelerated metal ion beams produced by a MevvaV.Ru vacuum arc source is demonstrated. The increase in surface conductivity is made possible due to experimental conditions in which an insulated collector is charged by beam ions to a potential many times lower than the accelerating voltage, and hence, than the average beam ion energy. The observed effect of charge neutralization of the accelerated ion beam is presumably associated with electrons knocked out of the electrodes of the accelerating system of the source and of the walls of the vacuum chamber by the accelerated ions.

36 MATERIALS SCIENCE↗

Optical doping of Al{sub x}Ga{sub 1-x}N compounds by ion implantation of Tm ions

Al{sub x}Ga{sub 1-x}N (0 axis for samples with AlN contents of 0.15 and 0.77 suggest a relation between the AlN content and Tm specific sites in the lattice. Rapid thermal annealing treatments under N{sub 2} ambient were performed to remove damage and promote optical activation of rare earth intra-4f{sup n} transitions. After annealing the observed intraionic emissions of Tm{sup 3+} ions were characterized by photoluminescence.

36 MATERIALS SCIENCE↗

Direct observation of enhanced emission sites in nitrogen implanted hybrid structured ultrananocrystalline diamond films

A hybrid-structured ultrananocrystalline diamond (h-UNCD) film, synthesized on Si-substrates by a two-step microwave plasma enhanced chemical vapour deposition (MPECVD) process, contains duplex structure with large diamond aggregates evenly dispersed in a matrix of ultra-small grains ({approx}5 nm). The two-step plasma synthesized h-UNCD films exhibit superior electron field emission (EFE) properties than the one-step MPECVD deposited UNCD films. Nitrogen-ion implantation/post-annealing processes further improve the EFE properties of these films. Current imaging tunnelling spectroscopy in scanning tunnelling spectroscopy mode directly shows increased density of emission sites in N implanted/post-annealed h-UNCD films than as-prepared one. X-ray photoelectron spectroscopy measurements show increased sp{sup 2} phase content and C-N bonding fraction in N ion implanted/post-annealed films. Transmission electron microscopic analysis reveals that the N implantation/post-annealing processes induce the formation of defects in the diamond grains, which decreases the band gap and increases the density of states within the band gap of diamond. Moreover, the formation of nanographitic phase surrounding the small diamond grains enhanced the conductivity at the diamond grain boundaries. Both of the phenomena enhance the EFE properties.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Synthesis of endohedral iron-fullerenes by ion implantation

In this paper, we discuss the results of our study of the synthesis of endohedral iron-fullerenes. A low energy Fe{sup +} ion beam was irradiated to C{sub 60} thin film by using a deceleration system. Fe{sup +}-irradiated C{sub 60} thin film was analyzed by high performance liquid chromatography and laser desorption/ ionization time-of-flight mass spectrometry. We investigated the performance of the deceleration system for using a Fe{sup +} beam with low energy. In addition, we attempted to isolate the synthesized material from a Fe{sup +}-irradiated C{sub 60} thin film by high performance liquid chromatography.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Strong vortex core pinning and Barkhausen-free magnetization response in thin Permalloy disks induced by implantation of 1 × 10{sup 4} Ga{sup +} ions

Artificial vortex core pinning sites are induced in thin Permalloy disks by point exposure to as few as 10 000 ions from a focused Ga{sup +} beam. These pinning sites yield a first-order change in the magnetization response of the disk. A single site can keep the vortex core pinned over an applied field range comparable to the vortex annihilation field of the unaltered disk. Several widely separated sites can work together to keep the core pinned in one place, while the Barkhausen effect is eliminated from the magnetization curve over a range approaching the saturation moment of the disk.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Short-range ordering of ion-implanted nitrogen atoms in SiC-graphene

We perform a structural analysis of nitrogen-doped graphene on SiC(0001) prepared by ultra low-energy ion bombardment. Using scanning tunneling microscopy, we show that nitrogen atoms are incorporated almost exclusively as graphitic substitution in the graphene honeycomb lattice. With an irradiation energy of 25 eV and a fluence of approximately 5 × 10{sup 14 }cm{sup −2}, we achieve a nitrogen content of around 1%. By quantitatively comparing the position of the N-atoms in the topography measurements with simulated random distributions, we find statistically significant short-range correlations. Consequently, we are able to show that the dopants arrange preferably at lattice sites given by the 6 × 6-reconstruction of the underlying substrate. This selective incorporation is most likely triggered by adsorbate layers present during the ion bombardment. This study identifies low-energy ion irradiation as a promising method for controlled doping in epitaxial graphene.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Porosity and biocompatibility study of ceramic implants based on ZrO{sub 2} and Al{sub 2}O{sub 3}

The work studies ZrO{sub 2}(Me{sub x}O{sub y})-based porous ceramics produced from the powders consisting of hollow spherical particles. It was shown that the structure is represented by a cellular framework with bimodal porosity consisting of sphere-like large pores and pores that were not filled with the powder particles during the compaction. For such ceramics, the increase of pore volume is accompanied by the increased strain in an elastic area. It was also shown that the porous ZrO{sub 2} ceramics had no acute or chronic cytotoxicity. At the same time, ceramics possess the following osteoconductive properties: adhesion support, spreading, proliferation and osteogenic differentiation of MSCs.

36 MATERIALS SCIENCE↗

Enhancement of critical current density in YBa{sub 2}Cu{sub 3}O{sub 7} films using a semiconductor ion implanter

An up-to-11-fold enhancement was observed in the in-magnetic-field critical current density (J{sub c}) in epitaxial YBa{sub 2}Cu{sub 3}O{sub 7} films on CeO{sub 2}-buffered SrTiO{sub 3} substrates by irradiation with 200- to 750-keV Si and 200-keV B ions. This enhancement indicates that ion beams in the range of 100 to 1000 keV, which are widely used for modifying the conductive properties of semiconducting materials, can significantly improve the vortex-pinning properties in second-generation superconducting wires. Also observed was a scaling relation between J{sub c} and the density of the vacancies (i.e., of Frenkel pairs) produced by the nuclear collisions between incident ions and target atoms, suggesting that this density is a key parameter in determining the magnitude of the J{sub c} enhancement. Also observed was an additional J{sub c} enhancement by a modification of the depth distribution of the vacancies, thus demonstrating the flexibility in controlling artificial pinning center (APC) properties in physical APC introduction.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Ion temperature and gas pressure effects on the magnetized sheath dynamics during plasma immersion ion implantation

Here, a collisional magnetized plasma with finite ion temperature is considered to examine the effects of the ion temperature and gas pressure on the plasma-sheath dynamics. We use the two-fluid model of plasma-sheath where the nonlinear equations of a dynamic sheath are solved using a full implicit scheme of finite difference method along with some convenient initial and boundary conditions at the plasma center and target. It is found that the ion temperature only has a significant effect on the characteristics of low voltage sheath, while the gas pressure (collision rate) seriously affects the dynamic characteristics of the low and high voltage plasma-sheath. One can see, increasing the ion temperature in low voltage plasma-sheath causes to increase the temporal curve of the ion dose and the ion impact energy on the target, reduces the temporal curve of the sheath width, and has no any effect on the temporal curve of the ion incident angle on the target. However, rising the gas pressure in low and high voltage plasma-sheath reduces all of these temporal curves.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Suppressed gross erosion of high-temperature lithium via rapid deuterium implantation

Lithium-coated high-Z substrates are planned for use in the NSTX-U divertor and are a candidate plasma facing component (PFC) for reactors, but it remains necessary to characterize the gross Li erosion rate under high plasma fluxes (>10 23 m -2 s -1 ), typical for the divertor region. In this work, a realistic model for the compositional evolution of a Li/D layer is developed that incorporates first principles molecular dynamics (MD) simulations of D diffusion in liquid Li. Predictions of Li erosion from a mixed Li/D material are also developed that include formation of lithium deuteride (LiD). The erosion rate of Li from LiD is predicted to be significantly lower than from pure Li. This prediction is tested in the Magnum-PSI linear plasma device at ion fluxes of 10 23 -10 24 m -2 s -1 and Li surface temperatures. ≤800 °C. Li/LiD coatings ranging in thickness from 0.2 to 500 μm are studied. The dynamic D/Li concentrations are inferred via diffusion simulations. The pure Li erosion rate remains greater than Langmuir Law evaporation, as expected. For mixed-material Li/LiD surfaces, the erosion rates are reduced, in good agreement with modelling in almost all cases. Lastly, these results imply that the temperature limit for a Li-coated PFC may be significantly higher than previously imagined.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗