Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Hadrons”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,333 records · Page 74
All sourcesNASA NTRSDOE OSTI
DOE OSTI2022

Thermal analysis of RHIC arc dipole magnet cold mass with EIC beam screen

The existing RHIC storage rings – including their superconducting magnet arcs – will be used for the hadron storage ring of the Electron-Ion Collider (EIC). The vacuum chamber of these magnets was not designed for the EIC hadron beams, with shorter bunches and of higher average current than the RHIC beams. With the current stainless steel beam pipe, the resistive-wall (RW) heating will exceed the dynamic heat load budget. Limiting the RW heating is important to prevent the superconducting magnets from quenching and to maintain a low screen temperature necessary to impede the rise of RW heating (higher resistance at higher temperature) as well as to achieve desired ultra-high vacuum. In addition, simulations predict the formation of electron cloud which would further contribute to the dynamic heat load and could compromise the quality and stability of the beam. To reduce the resistive-wall heating and suppress electron cloud, a beam screen will be installed in the vacuum chamber of the RHIC SC magnets. The screen will have a high RRR copper layer at its inner face – useful to reduce the resistive-wall impedance thanks to its high conductivity especially at cryogenic temperatures – and will be coated with a thin layer of amorphous carbon, a material with low secondary electron yield to suppress the formation of electron clouds. The baseline solution envisages a screen that will be cooled by thermal contact to the 4.55 K beam pipe. Detailed thermal analysis have been conducted in ANSYS 2020 for an arc dipole cold mass equipped with a beam screen in order to study the feasibility of a passively-cooled screen and guide its design. Temperature-dependent thermal conductivity properties of all materials in the operating (cryogenic) temperature range are considered. Suitable assumptions and simplifications are made to model the magnet coil and calculate its homogenized thermal conductivity. Sensitivity studies with respect to layer thicknesses and area of contact are carried out and results are presented.

43 PARTICLE ACCELERATORS↗
DOE OSTI2022

Synchronizing ESR and HSR for collisions at IP6 and IP8

Bunch circulation times in the ESR and HSR must be identical, whatever the electron and hadron energies. A particular bunch in either ring can only have collisions at either IP6 or IP8, but not at both. Synchronization is achieved by co-ordinating the design trajectory circumferences of the two rings, and by controlling the HSR and ESR path lengths from IP6 to IP8. Radial shift control of the HSR circumference is summarized. The conditions for synchronization are presented. The impact of operating HSR at low proton energy with 4 inner and 2 outer arcs is assessed. Changes of the ESR circumference due to the use of super-bends at the lowest electron energies are evaluated. The effect of J x -tuning on the ESR circumference and its compensation by an HSR radial shift are discussed. Finally, the potential effects of using a Ring Cooler for hadron cooling are considered.

43 PARTICLE ACCELERATORS↗
DOE OSTI2023

The Present and Future of QCD: QCD Town Meeting White Paper – An Input to the 2023 NSAC Long Range Plan

It is currently understood that there are four fundamental forces in nature: gravitational, electromagnetic, weak and strong forces. The strong force governs the interactions between quarks and gluons, elementary particles whose interactions give rise to the vast majority of visible mass in the universe. The mathematical description of the strong force is provided by the non-Abelian gauge theory Quantum Chromodynamics (QCD). While QCD is an exquisite theory, constructing the nucleons and nuclei from quarks, and furthermore explaining the behavior of quarks and gluons at all energies, remain to be complex and challenging problems. Such challenges, along with the desire to understand all visible matter at the most fundamental level, position the study of QCD as a central thrust of research in nuclear science. Experimental insight into the strong force can be gained using large particle accelerator facilities, which are necessary to probe the very short distance scales over which quarks and gluons interact. The Long Range Plans (LRPs) exercise of 1989 and 1996 led directly to the construction of two world-class facilities: the Continuous Electron Beam Accelerator Facility (CEBAF) at Jefferson Lab (JLab) that is focused on studying how the structure of hadrons emerges from QCD (cold QCD research), and the Relativistic Heavy Ion Collider (RHIC) at Brookhaven National Lab (BNL) that aims at the discovery and study of a new state of matter, the quark-gluon plasma (QGP), at extremely high temperatures (hot QCD research). These past investments have produced major advances. Nucleons and nuclei are being studied with increasing precision with a unified description of the partonic structure utilizing multi-dimensional imaging. Significant progress has been made, paving the way towards a complete picture of how quarks and gluons give rise to the mass, spin, and momentum of the nucleon. In hot QCD, the QGP is created in the collisions of nuclei at RHIC and the Large Hadron Collider (LHC) and is observed to behave like a fluid with very low specific shear viscosity; the current goals are to understand how the fluid behavior emerges from QCD and to characterize the temperature (and chemical potential) dependence of the properties of the QGP. As this White Paper is written, current experimental programs at CEBAF, RHIC and the LHC continue to provide exciting near term opportunities to capitalize on the investments in experimental equipment and accelerator operations. Most importantly, the QCD community looks forward to the construction of the Electron Ion Collider (EIC) as a major new facility to push forward QCD research in the next decades, with significant focus on exploring the properties of gluons, the mediators of the strong force.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2023

Thermal simulation of the HSR arc BPM Module for EIC

The Electron Ion Collider (EIC) Hadron Storage Ring (HSR) will reuse most of the existing superconducting magnets from the RHIC storage ring. However, the existing stripline beam position monitors (BPM) used for RHIC will not be compatible with the planned EIC hadron beam parameters that include higher intensity, shorter bunches, and some operational scenarios with large radial offsets of the beam in the vacuum chamber. To address these challenges, the existing RHIC stripline BPMs will be shielded, and a new BPM design using button pick-ups and integrated in a new vacuum interconnect/bellows assembly that will be installed adjacent to the existing BPMs. A thermal analysis of the new arc BPM housing and button pick-up design has been conducted to assess the effects caused by beam induced resistive wall heating and signal propagation through the button pick-up cables for several operational scenarios. This report will describe the analysis results to quantify the heat transfer and temperature distribution that can be expected on the new HSR cryogenic arc BPM housings, button pick-ups, and cryo-signal cables.

43 PARTICLE ACCELERATORS↗
DOE OSTI2021

Inclusive jets and dynamical mass effects

In this talk we will outline the connections among the inclusive jet correlator, the single-hadron fragmentation correlator, and the quark propagator, which open the way to studies of fundamental mechanisms in QCD -such as the dynamical generation of mass- by looking at the fully inclusive hadronization of a quark. In particular, we will focus on observables in semi-inclusive DIS and e+e? annihilation at the twist three level.

Accardi, Alberto↗
DOE OSTI2023

MTA Secondary Beamline Production and Optics Optimization

A new secondary beamline was recently installed in the MeV Test Area (MTA) with the objective of enhancing mu+/mu- production by factors of 3/8 by using a tungsten target versus the conventional graphite production target using the 400 MeV Fermilab proton Linac beam. Ultra-low energy muon beams can support world-class physics experiments for fundamental muon measurements, sensitive searches for symmetry violation, and precision tests of theory. Extensive production studies have confirmed higher muon yield from heavy targets (tungsten vs carbon), but also, surprisingly, showed significant differences in production fluence and energy spectrum between modern hadronic models (GENIEhad) and between GEANT and MCNP. Studies are also underway towards a high-efficiency source of muonium by stopping the mu+ beam in superfluid helium. Muon fluxes can be measured at MTA including using higher-Z and novel target geometries to test hadronic and production models which are critical to understanding ongoing experiments (Mu2e) and will significantly impact the planning of future HEP experiments and planning PIP II facilities. The MTA beamline will additionally support a broad user muon test beam for future experiments and R&D.

Ahmed, Shiza↗
DOE OSTI2023

Nucleon-Pion Spectroscopy from Sparsened Correlators

Neutrino oscillation experiments require accurate reconstructions of neutrino energies, which depend in part on a theoretical understanding of the axial $N\rightarrow\Delta$ transition form factors. A lattice QCD study of this transition will require construction of all hadronic states with energies up to $m_\Delta$, which at the physical point includes $N\pi$ and $N\pi\pi$. Building interpolating operators from sparse grids at the source and sink is a versatile method that allows construction of a wide range of diagram topologies and has successfully been used in other multi-hadron calculations. We will discuss application of this method to nucleon-pion systems and present preliminary results.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2023

Current Status of the High Field Cable Test Facility at Fermilab

Fermi National Accelerator Laboratory (FNAL) and Lawrence Berkeley National Laboratory (LBNL) are collaborating to construct a new High Field Vertical Magnet Test Facility (HFVMTF) designed for testing superconducting cables in high magnetic fields. This state-of-the-art facility will be situated at Fermilab and will provide capabilities comparable to EDIPO at PSI and FRESCA2 at CERN. The HFVMTF’s background magnetic field, reaching 15 T, will be generated by a magnet supplied by LBNL. The HFVMTF is a collaborative effort supported by the US DOE Offices of Science, High Energy Physics, and Fusion Energy Sciences. It will serve as a vital testbed for superconducting HTS cables, subjecting them to high magnetic fields and a wide range of temperatures, benefiting both scientific communities. Additionally, this facility will play a key role in testing high-field superconducting magnet models and demonstrators, including hybrid magnets, developed by the US Magnet Development Pro gram (MDP). These hybrid magnets, utilizing both LTS and HTS superconductors, are significant advancements toward achieving 18+ T dipoles for future hadron-hadron colliders. The presentation outlines the current status of the facility, covering aspects such as construction progress, cryostat designs, top and lambda plates, and systems for powering, quench protection, and monitoring.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2023

Future Studies of Dihadron Production in SIDIS

Spin asymmetry and cross section measurements in semi-inclusive hadroproduction grant access to a variety of parton distribution and fragmentation functions. Such measurements of dihadron production additionally constrain Dihadron Fragmentation Functions (DiFFs), and the extra degree of freedom from the second hadron facilitates access to some of the parton distribution functions. At CLAS kinematics, subleading-twist parton distributions are accessible in dihadron beam-spin and target-spin asymmetries, and a comparison of semi-inclusive scattering off a proton and a deuteron probes their flavor dependence. The future Electron-Ion Collider (EIC) with a transversely polarized proton will access several transverse-momentum dependent distributions such as Sivers and transversity. On the fragmentation side, numerous DiFFs are accessible, and their partial wave expansion probes correlations between the angular momentum of the fragmenting parton with that of the observed dihadron. Furthermore, different hadron channels probe flavor dependence in fragmentation. Together with CLAS, the EIC as well as CLAS with the proposed 22 GeV accelerator upgrade will cover a broad range of $Q^2$ and $x$, allowing for the study of evolution effects of all of these functions. This presentation will summarize the possibilities of these measurements at CLAS and at future experimental facilities.

Dilks, Christopher↗
DOE OSTI2023

Generalized wakefield of a microbunched electron cooler

In a previous note [1] we developed theoretical and computational tools for the study of microbunched electron cooling (MBEC [2]) in the three-dimensional regime. In this context, we were able to treat the key space charge effect in a rigorous fashion by taking explicitly into account the point-charge nature of the particles involved (electrons and hadrons). In this report, we build upon our earlier analysis by taking into consideration previously neglected effects that can cause Landau damping in the amplifier section (such as focusing, betatron oscillations and the angular spread of the electron beam). Beginning with the theoretical aspect of this work, we use our modified and expanded tools in order to calculate and study the generalized, point-hadron wakefield of the system, an important quantity that affects the cooling performance.

43 PARTICLE ACCELERATORS↗
DOE OSTI2023

Insight into Strong QCD and the Emergence of Mass from N* Experiments

Studies of nucleon resonance (N*) electroexcitation amplitudes (?vpN* electrocouplings) within a broad range of virtual photon four-momentum squared Q2 offer unique information on many facets of the strong interaction in the regime of large QCD running coupling (sQCD regime) seen in the generation of different resonances. The results on the ?vpN* electrocouplings from exclusive meson electroproduction data measured with the CLAS detector at JLab and their impact on understanding of sQCD dynamics will be presented in this talk. These CLAS data have provided the first and only available results on the evolution of the ?vpN* electrocouplings with Q2 to 5 GeV2 for most N* states in the mass range up to 1.8 GeV. A successful description of the CLAS results on the Q2-evolution of the ?(1232)3/2+, N(1440)1/2+, and ?(1600)3/2+ electrocouplings has been achieved within the continuum Schwinger method (CSM) by employing the same momentum dependence of the dressed quark mass inferred from the QCD Lagrangian, which also reproduces the experimental results on the pion elastic electromagnetic form factor and parton distribution function, and the nucleon elastic form factor. This success has demonstrated the capability for gaining insight into the emergence of hadron mass (EHM) from the exploration of the Q2-evolution of the ?vpN* electrocouplings. These studies also allow us to establish either universality or environmental sensitivity of the dressed quark mass function and to explore qq-correlation amplitudes of different spin-parities and the mixing between configurations of different orbital angular momentum. Exploration of the resonance electroexcitation with the CLAS12 detector and in the future with a possible 22 GeV machine at JLab offer the only foreseen opportunity to extend information on the ?vpN* electrocouplings for Q2 from 5-30 GeV2. Analyses of these results will cover the full range of distances where the dominant part of hadron mass and N* structure emerge from QCD.

Mokeev, Victor↗
DOE OSTI2024

Towards Lattice QCD Calculations of Pion Production

Neutrino oscillation experiments require accurate reconstructions of neutrino energies, which depend in part on a theoretical understanding of the axial N→Δ transition form factors. A lattice QCD study of this transition will require construction of all hadronic states with energies up to mΔ, which at the physical point includes Nπ and Nππ. Building interpolating operators from sparse grids at the source and sink is a versatile method that allows construction of a wide range of diagram topologies and has successfully been used in other multi-hadron calculations. We will discuss application of this method to nucleon-pion systems and present preliminary results.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2024

Dynamical Aspects of the Quark Gluon Plasma

Shortly after the Big Bang the entire universe was filled with a nearly perfect fluid known as the Quark Gluon Plasma. Relativistic heavy ion collisions can now reproduce this fluid in the laboratory where the Quark Gluon Plasma exhibits a rapid but smooth cross-over phase transition into hadrons at vanishing net-baryon densities. Recent experiments plan to explore finite baryon densities where a critical point is expected. If found, this would mark the first discovery of a critical point in a relativistic system described by a fundamental theory of nature, which would have far-reaching consequences for high-energy nuclear physics and nuclear astrophysics (such as in neutron star mergers). Characteristic temperatures of equilibrium (e.g. the inflection point of the entropy density) and transport coefficients (e.g. minimum of the shear viscosity over entropy density) vary widely at a cross-over phase transition but converge at a critical point, and extracting the behavior of these characteristic temperatures is a major focal point of this research. Specifically, the interplay between strange and light hadrons is exploited to study the flavor hierarchy in the cross-over region. To investigate this, a viscous relativistic hydrodynamics framework with two conserved charges is being developed into a new open-source code along with initial conditions that contain baryon number and strangeness. Flow observables sensitive to the equation of state and transport coefficients are calculated across beam energies. New techniques are being developed to study this flavor hierarchy from first principles and to extract the characteristic temperatures from experimental data. Through this new dynamical framework, this project provides essential guidance to the Beam Energy Scan II runs at Relativistic Heavy-Ion Collider and the future Facility for Antiproton and Ion Research facility in the search for the Quantum Chromodynamic critical point and subsequent investigation of the baryon-rich Quark Gluon Plasma.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2023

Study of Nucleon Resonance Electroexcitations at Jefferson Lab

Nucleons are the most fundamental three-body systems in Nature. During the last decade crucial progress has been achieved in the exploration of the spectrum and the structure of nucleon resonances. Studies of exclusive ?N, ?+??p, K?, and K? electroproduction off protons on the evolution of the electrocouplings with photon virtuality Q2 using the CLAS spectrometer has revealed a complex interplay between an inner core of three dressed quarks surrounded by an external meson-baryon cloud. CLAS12 is the only facility capable of extending these results on the electrocouplings into the unexplored Q2 range, spanning the domain of quark momenta where ? 50% of hadron mass is generated. The increase of the CEBAF energy and the upgrade of the CLAS12 spectrometer to measure exclusive electroproduction channels at higher luminosity and photon virtualities will offer a unique opportunity to explore how the dominant part of hadron mass and the bound three-quark structure of the resonant states emerge from QCD.

Achenbach, Patrick↗
DOE OSTI2024

Meas. K+ -Ar Total Inelastic Cross Section at ProtoDUNE-SP

ProtoDUNE-SP is a single-phase liquid argon time projection chamber that took hadron test beam data in 2018. The test beam included positively charged kaons with test beam momenta of 6 GeV/c and 7 GeV/c, providing a sample to study kaons to benefit future DUNE proton decay and neutrino interaction studies with kaons in the final state. The total inelastic cross section of a positively charged kaon was measured at these test beam settings using the LArIAT thin-slice method of dividing the wires of the time projection chamber into target slices for calculating the cross section, which leverages the monolithic quality of liquid argon detectors. A Bayesian-like unfolding method using RooUnfold was applied to both the incident and interacting slice distributions to measure the cross sections at both test beam momenta. The talk will discuss the method of unfolding, optimization studies for unfolding, and applying systematic uncertainties using a LArIAT-style hadronic cross section using unfolding to extract a kaon total inelastic cross section.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2024

Preliminary Transverse Shielding Analysis for the 1010-C RF Building

EIC is planning to construct a new building on the outer ring berm at 10 o’clock which will provide RF power to cryogenically-cooled beam line components in the electron and hadron storage rings. The distance of the building from the RHIC Tunnel and the amount of soil shielding required are the focus of this report. Siting the building closer to the RHIC Tunnel is desirable from an RF operations viewpoint since the waveguide runs and RF power losses will be minimized, but this may require the use of higher density shield materials, e.g., concrete, in addition to soil shielding. The radiological source terms are the prompt radiation hazards from the Hadron Storage Ring (HSR) and Electron Storage Ring (ESR) beam losses in the 10 o’clock sector and the lateral dose rates propagated through the shields. See Figure 1 below.

43 PARTICLE ACCELERATORS↗
DOE OSTI2024

Thermal simulation of the EIC HSR interconnect module - RF fingers

The Electron Ion Collider (EIC) Hadron Storage Ring (HSR) will reuse most of the existing superconducting magnets from the RHIC storage ring. However, the existing beam vacuum chamber and stripline BPMs will not be compatible with the planned EIC hadron bunches that will have a 3x higher intensity and be 10x shorter, and some operational scenarios with large radial offsets of the beam in the vacuum chamber. To address these challenges, a copper coated beam screen will be implemented, the existing RHIC stripline BPMs will be shielded and an interconnect module design, including new BPM will be installed adjacent to the existing BPMs. A thermal analysis of the new arc BPM interconnect housing has been conducted to assess the heating caused by beam induced resistive wall heating and electron cloud heating. An analysis of the BPM module has been made and reported separately. This report will focus on the other side of the interconnect module, containing the RF fingers.

43 PARTICLE ACCELERATORS↗