Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “GET”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,333 records · Page 74
All sourcesNASA NTRSDOE OSTI
NASA NTRS1975

Simplified simulation models for control studies of turbojet engines

The essential dynamical characteristics of a simple single spool turbojet engine were determined through simulation of low order system models on an analog computer. An accurate model was studied and system complexity was reduced through various linearizations and approximations. A derivation of a seventh order simplified simulation model is presented with a derivation of an even simpler third order model, and simulation results from each. The control problem studied is one of getting from zero fuel flow equilibrium to a high thrust equilibrium while taking into account surge margin and turbine inlet temperature constraints.

Brennan, T. C.↗
NASA NTRS1976

Experimental and analytical study of thermal acoustic oscillations

The thermal acoustic oscillations (TAO) data base was expanded by running a large number of tubes over a wide range of parameters known to affect the TAO phenomenon. These parameters include tube length, wall thickness, diameter, material, insertion length and length-to-diameter ratio. Emphasis was placed on getting good boiloff data. A large quantity of data was obtained, reduced, correlated and analyzed and is presented. Also presented are comparisons with previous types of correlations. These comparisons show that the boiloff data did not correlate with intensity. The data did correlate in the form used by Rott, that is boiloff versus TAO pressure squared times frequency to the one-half power. However, this latter correlation required a different set of correlation constants, slope and intercept, for each tube tested.

Spradley, L. W.↗
NASA NTRS1977

Preserving sparseness in multivariate polynominal factorization

Attempts were made to factor these ten polynomials on MACSYMA. However it did not get very far with any of the larger polynomials. At that time, MACSYMA used an algorithm created by Wang and Rothschild. This factoring algorithm was also implemented for the symbolic manipulation system, SCRATCHPAD of IBM. A closer look at this old factoring algorithm revealed three problem areas, each of which contribute to losing sparseness and intermediate expression growth. This study led to effective ways of avoiding these problems and actually to a new factoring algorithm. The three problems are known as the extraneous factor problem, the leading coefficient problem, and the bad zero problem. These problems are examined separately. Their causes and effects are set forth in detail; the ways to avoid or lessen these problems are described.

Wang, P. S.↗
NASA NTRS1977

A mathematical force and moment model of a UH-1H helicopter for flight dynamics simulations

A model of a UH-1H helicopter was developed to support flight simulations and for developmental work on an avionics system known as V/STOLAND system. Equations and numerical values of constants used to represent the helicopter are presented. Responses to stop inputs of the cyclic and collective controls are shown and compared with flight test data for a UH-1H. The model coefficients were adjusted in an attempt to get a consistant match with the flight time histories at hover and 60 knots. Response matching was obtained at 60 knots, but the matching at hover was not as successful. Pilot evaluations of the model, both fixed and moving base, were made.

Talbot, P. D.↗
NASA NTRS1976

Precision processing of earth image data

Precise corrections of Landsat data are useful for generating land-use maps, detecting various crops and determining their acreage, and detecting changes. The paper discusses computer processing and visualization techniques for Landsat data so that users can get more information from the imagery. The elementary unit of data in each band of each scene is the integrated value of intensity of reflected light detected in the field of view by each sensor. To develop the basic mathematical approach for precision correction of the data, differences between positions of ground control points on the reference map and the observed control points in the scene are used to evaluate the coefficients of cubic time functions of roll, pitch, and yaw, and a linear time function of altitude deviation from normal height above local earth's surface. The resultant equation, termed a mapping function, corrects the warped data image into one that approximates the reference map. Applications are discussed relative to shade prints, extraction of road features, and atlas of cities.

Bernstein, R.↗
NASA NTRS1976

Space solar power - An available energy source

The development of satellite solar power stations is described with attention given to station design and assembly in space. Problems associated with conversion of solar energy into microwaves and with getting the station into orbit are considered. The use of a solar propulsion system for pushing the station to high orbit is discussed along with questions of station lifetime (estimated to be about thirty years). The paper is copiously illustrated with drawings projecting various aspects of station design and utilization.

Ferdman, S.↗
NASA NTRS1977

Electron-impact excitation of carbon and silicon in the distorted-wave approximation

The 3P to 1D electron-impact excitation cross section within the ground configuration of both neutral carbon and silicon is calculated in the distorted-wave approximation of the two-state Hartree-Fock coupled equations. An essential element of the present treatment is that orthogonality to core orbitals is not assumed in deriving equations for the scattering orbitals. A local adiabatic polarization potential is also added to the distorted-wave equations. Both elements are necessary in getting good agreement with close-coupling results for carbon to low impacting energies. The agreement is sufficiently good that predictions for silicon should be accurate to within a factor of 2.

Pindzola, M. S.↗
NASA NTRS1978

Infrared-enhanced TV for fire detection

Closed-circuit television is superior to conventional smoke or heat sensors for detecting fires in large open spaces. Single TV camera scans entire area, whereas many conventional sensors and maze of interconnecting wiring might be required to get same coverage. Camera is monitored by person who would trip alarm if fire were detected, or electronic circuitry could process camera signal for fully-automatic alarm system.

Hall, J. R.↗
NASA NTRS1978

A study of low-cost reliable actuators for light aircraft. Part A: Chapters 1-8

An analysis involving electro-mechanical, electro-pneumatic, and electro-hydraulic actuators was performed to study which are compatible for use in the primary and secondary flight controls of a single engine light aircraft. Actuator characteristics under investigation include cost, reliability, weight, force, volumetric requirements, power requirements, response characteristics and heat accumulation characteristics. The basic types of actuators were compared for performance characteristics in positioning a control surface model and then were mathematically evaluated in an aircraft to get the closed loop dynamic response characteristics. Conclusions were made as to the suitability of each actuator type for use in an aircraft.

Eijsink, H.↗
NASA NTRS1978

Characterization of the physico-chemical properties of polymeric materials for aerospace flight

Materials intended for use in spacecraft are routinely tested at low pressures, and outgassed substances are condensed on cold surfaces at liquid nitrogen temperature, -196 C. These condensates are then analyzed by infrared spectroscopy, and gas chromotography-mass spectroscopy. The polymers were tested and allowed to outgas isothermally at 125 C and 0.000001 torr or less. Valuable information was obtained by extending the temperature range below and above 125 C. The performance of substances of interest to NASA were investigated by thermogravimetric analysis (TGA) from room temperature to 450 C or until the substance decomposed. Thermogravimetric analysis of a substance is a useful technique for studying its thermal nature in both static and dynamic thermal environments. It gives considerable insight into the stability and characterization of substances and the changes they undergo in varying thermal environments. The system is able to get pressures down to 1 micron or 0.001 torr.

Rock, M.↗
NASA NTRS1978

Quick look test report: MPT static firing no. 2 test MPT-S2

The three engine cluster was fired at 70 percent power level for a nominal 15 seconds to evaluate the integrated performance of the main propulsion system. Engine ignition occurred at approximately 1403 with the planned mainstage duration achieved for all three engines. Operation of all systems was as expected with the exception of the recirculation pumps. The pumps were started while the propellant loading was in fast fill, but they cavitated and lost head at the termination of fast fill. The pumps were subsequently restarted after pressurizing the tank and draining back propellant to get good quality. Post test inspection of the engines revealed some discoloration on the inside of the thrust chamber and distorted drain lines for engine #2.

Source record↗
NASA NTRS1977

Turbulence processes and simple closure schemes

The problem of closure in turbulence in the case of two-point correlations resides in the existence of two unknowns E and W, the energy spectrum function and the transfer function, respectively, in the spectrum equation. In the case of weak turbulence, W is negligible. In case of higher correlations, closure can be effective by neglecting the inertia term in the highest order term used. Specifying a certain number of spectra at an initial time is also a way of getting around the closure problem. A simple case of turbulent shear flow is then considered, where two-point correlation equations are used and the velocity is broken into mean and fluctuating components. This yields a differential equation for the energy spectrum, the three terms of which are the energy spectrum, production term and dissipation term. They are plotted for a particular time. Similar analyses and comparisons with experiment are made for pipe and boundary layer flows.

Deissler, R. G.↗
NASA NTRS1978

Legal issues inherent in Space Shuttle operations

The National Aeronautics and Space Act of 1958 (NASAct) is discussed with reference to its relevance to the operation of the Space Shuttle. The law is interpreted as giving NASA authority to regulate specific Shuttle missions, as well as authority to decide how much space aboard the Shuttle gets rented to whom. The Shuttle will not, however, be considered a 'common carrier' either in terms of NASAct or FAA regulations, because it will not be held available to the public-at-large, as are the flag carriers of various national airlines, e.g., Lufthansa, Air France, Aeroflot, etc. It is noted that the Launch Policy of 1972, which ensures satellite launch assistance to other countries or international organizations, shall not be interpreted as conferring common carrier status on the Space Shuttle.

Mossinghoff, G. J.↗
NASA NTRS1980

Viewing electron-beam welds in progress

With aid of optical filter, operator of electron-beam welding machine can view TV image of joint that is being welded and can make corrections as necessary. Operator can see when weld bead gets out of alinement, for example, and compensate for deflection of electron beam caused by changes in magnetic field.

Armenoff, C. T.↗
NASA NTRS1977

Battery life test using reconditioning

A discussion is presented on nickel cadmium battery life tests using reconditioning and some comparative tests not using reconditioning. The discussion is aimed at the program application part of the testing. The goals of the program were to get an increased utilization out of the battery system in geosynchronous orbit. An attempt was made to push the depth of discharge operation up around 80 to 85 percent and the intent with the reconditioning program was to extend this type of utilization out towards a 10-year life and attune the voltage regulation.

Sparks, R. H.↗
NASA NTRS1979

Surveys for sensitivity to fibers and potential impacts from fiber induced failures

The surveys for sensitivities to fibers and potential impacts from fiber induced failures begins with a review of the survey work completed to date and then describes an impact study involving four industrial installations located in Virginia. The observations and results from both the surveys and the study provide guidelines for future efforts. The survey work was done with three broad objectives: (1) identify the pieces of potentially vulnerable equipment as candidates for test; (2) support the transfer function work by gaining an understanding of how fibers could get into a building; and (3) support the economic analysis by understanding what would happen if fibers precipitated a failure in an item of equipment.

Butterfield, A. J.↗
NASA NTRS1979

Advanced composites in sailplane structures: Application and mechanical properties

Advanced Composites in sailplanes mean the use of carbon and aramid fibers in an epoxy matrix. Weight savings were in the range of 8 to 18% in comparison with glass fiber structures. The laminates will be produced by hand-layup techniques and all material tests were done with these materials. These values may be used for calculation of strength and stiffness, as well as for comparison of the materials to get a weight-optimum construction. Proposals for material-optimum construction are mentioned.

Muser, D.↗
NASA NTRS1979

Acoustic analysis of the propfan

A review of propeller noise prediction technology is presented. Two methods for the prediction of the noise from conventional and advanced propellers in forward flight are described. These methods are based on different time domain formulations. Brief descriptions of the computer algorithms based on these formulations are given. The output of the programs (the acoustic pressure signature) was Fourier analyzed to get the acoustic pressure spectrum. The main difference between the two programs is that one can handle propellers with supersonic tip speed while the other is for subsonic tip speed propellers. Comparisons of the calculated and measured acoustic data for a conventional and an advanced propeller show good agreement in general.

Farassat, F.↗