Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Fragmentation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,333 records · Page 74
All sourcesNASA NTRSDOE OSTI
NASA NTRS2017

Quantitative EPMA Compositional Mapping of NWA 2995: Characterization, and Petrologic Interpretation of Mafic Clasts

We present the first fully quantitative compositional maps of lunar meteorite NWA 2995 using electron microprobe stage mapping, and compare selected clast mineralogy and chemistry. NWA 2995 is a feldspathic fragmental breccia containing numerous highland fine grained lithologies, including anorthosite, norite, olivine basalt, subophitic basalt, gabbro, KREEP-like basalt, granulitic and glassy impact melts, coarse-grained mineral fragments, Fe-Ni metal, and glassy matrix [1]. Chips of NWA 2995, representing these diverse materials, were analyzed by INAA and fused-bead electron-probe microanalysis (EPMA); comparison of analytical data suggests grouping of lunar meteorites NWA 2995, 2996, 3190, 4503, 5151, and 5152. The mean composition of NWA 2995 corresponds to a 2:1 mixture of feldspathic and mare material, with approximately 5% KREEP component [2]. Clast mineral chemistry and petrologic interpretation of paired stone NWA 2996 has been reported by Mercer et al. [3], and Gross et al. [4]. This study combines advances in quantitative EPMA compositional mapping and data analysis, as applied to selected mafic clasts in a polished section of NWA 2995, to investigate the origin of mafic lithic components and to demonstrate a procedural framework for petrologic analysis.

Carpenter, P. K.↗
NASA NTRS2017

Characterization of Orbital Debris via Hyper-Velocity Laboratory-Based Tests

Existing DOD and NASA satellite breakup models are based on a key laboratory test, Satellite Orbital debris Characterization Impact Test (SOCIT), which has supported many applications and matched on-orbit events involving older satellite designs reasonably well over the years. In order to update and improve these models, the NASA Orbital Debris Program Office, in collaboration with the Air Force Space and Missile Systems Center, The Aerospace Corporation, and the University of Florida, replicated a hypervelocity impact using a mock-up satellite, DebriSat, in controlled laboratory conditions. DebriSat is representative of present-day LEO satellites, built with modern spacecraft materials and construction techniques. Fragments down to 2 mm in size will be characterized by their physical and derived properties. A subset of fragments will be further analyzed in laboratory radar and optical facilities to update the existing radar-based NASA Size Estimation Model (SEM) and develop a comparable optical-based SEM. A historical overview of the project, status of the characterization process, and plans for integrating the data into various models will be discussed herein.

Cowardin, Heather↗
NASA NTRS2017

NASA's Ground-Based Observing Campaigns of Rocket Bodies with the UKIRT and NASA ES-MCAT Telescopes

Rocket bodies comprise a class of human-made space debris that are at the same time essential for launching every spacecraft from the Earth, but are also a significant source of debris both as intact objects, as well as fragmented debris. Unspent fuel has been long theorized as a potential cause of catastrophic rocket body break-ups. Given typical orbital speeds range from approximately 2-3 kilometers per second at Geosynchronous Orbit (GEO) and up to 15 kilometers per second in low Earth orbit (LEO), collisions with uncatalogued and undetected debris can also cause catastrophic breakups. Understanding break-ups is a necessary step in preventing them, and one key step in that process is to correlate and characterize daughter fragments with their parent bodies. Two very different methods include (1) conducting photometric surveys to correlate an object's motion and orbital elements to the parent body, and (2) characterizing what materials comprise the target to determine whether those materials are consistent with the parent body or like objects. With this in mind, photometric data were taken shortly after the breakup of one rocket body for short-term orbital studies, and a suite of spectral data were taken of rocket bodies that are fully intact to compare with debris, for characterization studies. Targets included Titan Transtage, Briz-M, and Ariane rocket bodies and debris. Spectra of each sub-class of rocket body were very similar within their rocket body type, but differed distinctly from one type to the next, supporting the effectiveness of this approach.

Lederer, Susan M.↗
NASA NTRS2017

Meteorite Material Model for Structural Properties

To assess the threat posed by an asteroid entering Earth's atmosphere, one must predict if, when, and how it fragments during entry. A comprehensive understanding of the asteroid material properties is needed to achieve this objective. At present, the meteorite material found on earth are the only objects from an entering asteroid that can be used as representative material and be tested inside a laboratory setting. Due to complex petrology, it is technically challenging and expensive to obtain reliable material properties by means of laboratory test for a family of meteorites. In order to circumvent this challenge, meteorite unit models are developed to determine the effective material properties including Youngs modulus, compressive and tensile strengths and Poissons ratio, that in turn would help deduce the properties of asteroids. The meteorite unit is a representative volume that accounts for diverse minerals, porosity, cracks and matrix composition. The Youngs Modulus and Poissons Ratio in the meteorite units are calculated by performing several hundreds of Monte-Carlo simulations by randomly distributing the various phases inside these units. Once these values are obtained, cracks are introduced in these meteorite units. The size, orientation and distribution of cracks are derived by extensive CT-scans and visual scans of various meteorites from the same family. Subsequently, simulations are performed to attain stress-strain relations, strength and effective modulus values in the presence of these cracks. The meteorite unit models are presented for H, L and LL ordinary chondrites, as well as for terrestrial basalt. In the case of the latter, data from the simulations is compared with experimental data to validate the methodology. These material models will be subsequently used in fragmentation modeling of full scale asteroids.

Meteorite↗
NASA NTRS2018

Almahata Sitta MS-MU-011 and MS-MU-012: Formation Conditions of Two Unusual Rocks From the Ureilite Parent Body

Almahata Sitta meteorites are unique polymict breccia, comprising of many different meteorite groups as individual fragments dominated by ureilite lithologies and are considered to be recovered fragments of the asteroid 2008TC3. Recently, two unusual Almahata Sitta samples (MS-MU-011 and MS-MU-012) have been reported that show close petrogenetic relationships to ureilites. MS-MU-011 is a trachyandesite mainly composed of feldspar (plagioclase and anorthoclase) and pyroxene (pigeonite and augite) having ureilitic oxygen isotopic ratios. MS-MU-012 is the first ureilite example (unbrecciated) containing primary plagioclase crystals. The findings of these two rock types are important to better understand formation conditions of ureilites and the evolution of their parent body(s). In this abstract we discuss formation conditions of these ureilite-related rocks using redox state estimate by Fe valence states of plagioclase and olivine cooling rate calculations.

Mikouchi, T.↗
NASA NTRS2016

The Frequency of Giant Impacts on Earth-Like Worlds

The late stages of terrestrial planet formation are dominated by giant impacts that collectively influence the growth, composition, and habitability of any planets that form. Hitherto, numerical models designed to explore these late stage collisions have been limited by assuming that all collisions lead to perfect accretion, and many of these studies lack the large number of realizations needed to account for the chaotic nature of N-body systems. We improve on these limitations by performing 280 simulations of planet formation around a Sun-like star, half of which used an N-body algorithm that has recently been modified to include fragmentation and hit-and-run (bouncing) collisions. We find that when fragmentation is included, the final planets formed are comparable in terms of mass and number; however, their collision histories differ significantly and the accretion time approximately doubles. We explored impacts onto Earth-like planets, which we parameterized in terms of their specific impact energies. Only 15 of our 164 Earth-analogs experienced an impact that was energetic enough to strip an entire atmosphere. To strip about half of an atmosphere requires energies comparable to recent models of the Moon-forming giant impact. Almost all Earth-analogs received at least one impact that met this criteria during the 2 Gyr simulations and the median was three giant impacts. The median time of the final giant impact was 43 Myr after the start of the simulations, leading us to conclude that the time-frame of the Moon-forming impact is typical among planetary systems around Sun-like stars.

terrestrial planet formation↗
NASA NTRS2018

Lunar Meteorite NWA 11421: X-Ray Tomogrpahy & Preliminary Petrology

Lunar meteorite NWA 11421 is provisionally placed with the "NWA 8046 clan" of similar stones (the "Algerian Megafind") of which at least 33 kg has been recovered. NWA 11421 and pairs are feldspathic regolith breccias, with angular fragments of plagioclase-rich clasts in a dark glassy matrix. Most members of this clan contain < 5.5% FeO and < 0.3 ppm Th. To date, there have been no petrographic studies reported of these lunar meteorites. An 11.7 gm sample of NWA 11421 was purchased from Marcin Cimala, holder of the main mass - this sample is consistent in all respects with the formal meteorite description. This particular sample was selected because it appeared to contain a fragment of dunite.

Treiman, A. H.↗
NASA NTRS2019

Kinetic Damage from Meteorites

Ballistic (kinetic energy) damage from falling meteorites has been recorded in two cases: the 1954 Sylacuga, Alabama meteorite of 4 kilogram mass which indirectly hit Ann Hodges and the 1992 Mbale meteorite fall where a 4 gram-sized meteorite struck a young boy. Neither event was fatal. Structures damaged by meteorites are much more common and include mail boxes (Figure 1) and cars (Figure2). Figure 3 shows that meteorite fragments of order 0.1 kilograms may cause serious human injury/fatality. Halliday et al (1985) estimated a human is struck once per decade by a meteorite (most likely gram-sized) while more than a dozen structures should be impacted annually by meteorite fragments.

Cooke, W.↗
NASA NTRS2018

Implications of the Interstellar Object 1I/'Oumuamua for Planetary Dynamics and Planetesimal Formation

'Oumuamua, the first bona fide interstellar planetesimal, was discovered passing through our Solar system on a hyperbolic orbit. This object was likely dynamically ejected from an extrasolar planetary system after a series of close encounters with gas giant planets. To account for 'Oumuamua's detection, simple arguments suggest that ∼1M⊕ of planetesimals are ejected per solar mass of Galactic stars. However, that value assumes mono-sized planetesimals. If the planetesimal mass distribution is instead top-heavy, the inferred mass in interstellar planetesimals increases to an implausibly high value. The tension between theoretical expectations for the planetesimal mass function and the observation of 'Oumuamua can be relieved if a small fraction (∼0.1−1 per cent) of planetesimals are tidally disrupted on the pathway to ejection into 'Oumuamua-sized fragments. Using a large suite of simulations of giant planet dynamics including planetesimals, we confirm that 0.1–1 per cent of planetesimals pass within the tidal disruption radius of a gas giant on their pathway to ejection. 'Oumuamua may thus represent a surviving fragment of a disrupted planetesimal. Finally, we argue that an asteroidal composition is dynamically disfavoured for 'Oumuamua, as asteroidal planetesimals are both less abundant and ejected at a lower efficiency than cometary planetesimals.

planetesimals↗
NASA NTRS2019

Recently Formed Crater Clusters on Mars

This study maps and measures assorted properties of new dated crater clusters that formed recently when impactors fragmented in the atmosphere of Mars. We report these statistics for 77 clusters: number of craters, size of cluster, dispersion of cluster, direction (azimuth) from which the impactor approached, and an estimate of the angle from vertical of the impact. Clusters range from a few to hundreds of craters, with most containing tens of craters. They are most commonly dispersed over hundreds of meters, with extents ranging from a few meters to a few kilometers. We find that dispersion generally does not correlate with topographic elevation. However, when the highest elevations are disregarded, clusters are more dispersed at lower elevations, as expected. Impact azimuths are randomly distributed and do not express a clear directionality of incoming meteoroids. Results suggest impacts occur closer to horizontal than expected, which could be due to observational effects. The characteristics we report here provide important constraints for future work in understanding atmospheric fragmentation processes; properties of the impactors themselves, such as density and orbital parameters; and the seismic detectability of impacts. These are critical aspects to understand, as approximately half of current impacts are observed to be clusters.

Clusters↗
NASA NTRS2019

The NASA Orbital Debris Engineering Model 3.1: Development, Verification, and Validation

The NASA Orbital Debris Program Office has developed the Orbital Debris Engineering Model (ORDEM) primarily as a tool for spacecraft designers and other users to understand the long-term risk of collisions with orbital debris. The newest version, ORDEM 3.1, incorporates the latest and highest fidelity datasets available to build and validate representative orbital debris populations encompassing low Earth orbit (LEO) to geosynchronous orbit (GEO) altitudes for the years 2016-2050. ORDEM 3.1 models fluxes for object sizes > 10 μm within or transiting LEO and > 10 cm in GEO. The deterministic portion of the populations in ORDEM 3.1 is based on the U.S. Space Surveillance Network (SSN) catalog, which provides coverage down to approximately 10 cm in LEO and 1 m in GEO. Observational datasets from radar, in situ, and optical sources provide a foundation from which the model populations are statistically extrapolated to smaller sizes and orbit regions that are not well-covered by the SSN catalog, yet may pose the greatest threat to operational spacecraft. Objects in LEO ranging from approximately 5 mm to 10 cm are modeled using observational data from ground-based radar, namely the Haystack Ultrawideband Satellite Imaging Radar (HUSIR – formerly known as Haystack). The LEO population smaller than approximately 3 mm in size is characterized based on a reanalysis of in situ data from impacts to the windows and radiators of the U.S. Space Transportation System orbiter vehicle, i.e., the Space Shuttle. Data from impacts on the Hubble Space Telescope are also used to validate the sub-millimeter model populations in LEO. Debris in GEO with sizes ranging from 10 cm to 1 m is modeled using optical measurement data from the Michigan Orbital DEbris Survey Telescope (MODEST). Specific, major debris-producing events, including the Fengyun-1C, Iridium 33, and Cosmos 2251 debris clouds, and unique populations, such as sodium-potassium droplets, have been re-examined and are modeled and added to the ORDEM environment separately. The debris environment greater than 1 mm is forecast using NASA’s LEO-to- GEO ENvironment Debris model (LEGEND). Future explosions of intact objects and collisions involving objects greater than 10 cm are assessed statistically, and the NASA Standard Satellite Breakup Model is used to generate fragments from these events. Fragments smaller than 10 cm are further differentiated based on material density categories, i.e., high-, medium-, and low-density, to better characterize the potential debris risk posed to spacecraft. The future projection of the sub-millimeter environment is computed using a special small-particle degradation model where small particles are created from intact spacecraft and rocket bodies. This work discusses the development, features, and capabilities of the ORDEM 3.1 model; the ne new data analyses used to build the model populations; and sample verification and validation results.

Matney, M.↗
NASA NTRS2019

Using Deep Learning to Automate Inference of Meteoroid Pre-Entry Properties

Properly assessing the asteroid threat depends on the knowledge of asteroid pre-entry parameters, such as size, velocity, mass, density, and strength. Although a vast number of possible bodies to study exist, such characterization of asteroid populations is currently limited by substantial costs associated with space rendezvous missions and rare meteorite findings. As asteroids fragment, ablate, and decelerate in the atmosphere, they emit light detectable by ground-based and space-borne instruments. Earth’s atmosphere, thus, becomes an accessible laboratory that enables impactor risk assessments by facilitating inference of the pre-entry parameters. These asteroid pre-entry conditions are typically deduced by modeling the entry and breakup physics that best reproduce the observed light or energy deposition curve. However, this process requires extensive manual trial-and-error of uncertain modeling parameters. Automating meteor modeling and inference would improve property distributions used in risk assessments and enable population characterization as more light curves become more readily available through the presence of space assets and ground-based camera networks. We previously developed a genetic algorithm to automate meteor modeling by using the fragment-cloud model (FCM) to search for the values of the FCM input parameters (e.g., diameter) that generate energy deposition profiles that match the observed one. Now, we apply deep learning to infer asteroid diameter, velocity, and density from observed energy deposition curves. We trained and tested our neural network models with synthetic energy deposition curves modeled using the FCM rubble pile implementation. We present an application of a 1D convolutional neural network and compare its performance to other attempted regressors and machine learning techniques, such as a fully connected neural network and Random Forest regression, to demonstrate its capabilities. We validate our model weights and approach using the Chelyabinsk, Tagish Lake, Benešov, Košice, and Lost City meteors.

Tarano, Ana Maria↗
NASA NTRSDate not supplied

Making Thin Sections from National Treasures: A Little Moon Rock Goes a Long Way

NASA’s Johnson Space Center curates the Apollo sample collection through their facilities in Houston, TX. It is a dual-purpose facility, intended both to store and preserve the precious samples, as well as to make them available for ongoing scientific study and public examination. The facilities consist of multiple vaults and lab spaces, including the Apollo Thin Section Lab. Although it is a part of the Curation facilities, this lab is intended to process specific lunar rock and dust samples into what are called “thin sections”. A thin section is a microscope slide with a very thin, highly polished slice of rock material mounted on it. These are used not only for microscope viewing, but also for a range of other sophisticated scientific instruments to map and measure fine details of the rock’s physical and chemical composition and structure. The process of making a thin section requires great care and patience and is an art in itself; each one is unique, and each sample can behave very differently while going through the same basic procedures. In general, it begins by taking a small chip of rock from a much larger sample. The rock fragment is placed within a small mold and liquid epoxy is poured over it and allowed to harden, producing what is called a “potted butt” (Figure 1). This is to stabilize the rock so that it won’t fragment or crumble during polishing, and to fill any cracks or voids within the rock. Once hardened, the epoxy on the bottom is carefully ground away to expose the rock surface within, which is then polished to a 1-micron finish. A thin new layer of fresh epoxy is then applied to the polished surface and used to mount it to a silica slide. Once the mounting epoxy has hardened, the potted butt is cut off less than one millimeter above the slide using a low-speed circular saw. This thin layer of sample material attached to the slide undergoes further grinding and polishing, typically bringing the sample thickness down to about 35 microns – roughly one third of the thickness of a human hair. The remaining potted butt is saved for future scientific investigations and can be re-polished and used again until all the rock material within it is used up. A single thin section can be reused countless times by numerous different researchers. In addition, thin sections are often exquisitely beautiful (Figure 2) and in some cases, lunar thin sections are used as public display samples, such as at the Smithsonian Air and Space Museum in Washington, DC. The production of thin sections allows an immense variety of research to be conducted on a tiny amount of rock or mineral material, allowing the bulk of the Apollo collection to stay pristine and unaltered, and thus, remain available for next generation of lunar scientists to further our insight into the Moon’s geological diversity, and to bring valuable new insights to our understanding of the origin of the Earth-Moon system.

J J Kent↗
NASA NTRS2019

Recently Formed Crater Clusters on Mars

This study maps and measures assorted properties of new dated crater clusters that formed recently when impactors fragmented in the atmosphere of Mars. We report these statistics for 77 clusters:number of craters, size of cluster, dispersion of cluster, direction (azimuth) from which the impactor approached, and an estimate of the angle from vertical of the impact. Clusters range from a few to hundreds of craters, with most containing tens of craters. They are most commonly dispersed over hundreds of meters,with extents ranging from a few meters to a few kilometers. We find that dispersion generally does not correlate with topographic elevation. However, when the highest elevations are disregarded, clusters are more dispersed at lower elevations, as expected. Impact azimuths are randomly distributed and do not express a clear directionality of incoming meteoroids. Results suggest impacts occur closer to horizontal than expected, which could be due to observational effects. The characteristics we report here provide important constraints for future work in understanding atmospheric fragmentation processes; properties of the impactors themselves, such as density and orbital parameters; and the seismic detectability of impacts. These are critical aspects to understand, as approximately half of current impacts are observed to be clusters.

I. J. Daubar↗
NASA NTRS2020

Exogenic Basalt on Asteroid (101955) Bennu

When rubble-pile asteroid 2008 TC3 impacted Earth on October 7, 2008, the recovered rock fragments indicated that such asteroids can contain exogenic material. However, spacecraft missions to date have only observed exogenous contamination on large, monolithic asteroids that are impervious to collisional disruption. Here we report the presence of meter-scale exogenic boulders on the surface of near-Earth asteroid (101955) Bennu - the 0.5-km, rubble-pile target of the OSIRIS-REx mission which has been spectroscopically linked to the CM carbonaceous chondrite meteorites. Hyperspectral data indicate that the exogenic boulders have the same distinctive pyroxene composition as the howardite-eucrite-diogenite (HED) meteorites that come from (4) Vesta, a 525-km diameter asteroid that has undergone differentiation and extensive igneous processing. Delivery scenarios include the infall of Vesta fragments directly onto Bennu or indirectly onto Bennu’s parent body, where the latter’s disruption created Bennu from a mixture of endogenous and exogenic debris. Our findings demonstrate that rubble-pile asteroids can preserve evidence of inter-asteroid mixing that took place at macroscopic scales well after planetesimal formation ended. Accordingly, the presence of HED-like material on the surface of Bennu provides previously unrecognized constraints on the collisional and dynamical evolution of the inner main belt.

Asteroids↗
NASA NTRSDate not supplied

The Aguas Zarcas Breccia - Similarities to Surface Features of Asteroids Ryugu and Bennu

At 21:07 local time on 23rd April 2019, a meteorite fall occurred in Aguas Zarcas, San Carlos County, Alajuela province, Costa Rica. The rapid recovery of this brecciated carbonaceous chondrite after its fall provides an opportunity to investigate a freshly-fallen, relatively uncontaminated and highly-brecciated meteorite for comparison to the samples returned from C-group asteroids by the Hayabusa2 and OSIRIS-REx spacecraft. The study includes several pre-rain fragments. Our X-ray Computed Tomography(XCT) results show many different lithologies. In this study we describe the petrography and mineralogy of five different lithologies of the Aguas Zarcas meteorite. We also present bulk oxygen isotope data of some lithologies and results concerning the organic matter. We describe all the fragments in detail and attempt a classification of each lithology in order to understand the origin and the history of formation of the Aguas Zarcas' parent body. Our results show some lithologies of Aguas Zarcas similar to those in CM chondrites, but others are unique. The different lithologies [1] represent different levels of hydration and heating as well, which are good analogues for the types of materials returned from asteroids Bennu and Ryugu. Spectroscopic observations of the Ryugu and Bennu asteroids compared to laboratory measurements of meteorites suggest that the asteroids show some similarities to heated CM, heated CI or, CI chondrites [2-5]. Both asteroids are regarded to consist of materials altered by aqueous alteration (e.g., [5]) and formed by re-accretion after impact destruction and brecciation (e.g., [6-7]). Considering the various different lithologies in Aguas Zarcas [2] and other CM chondrites [8-9] these types of carbonaceous chondrites may be regarded as good analogues for samples from the Ryugu and Bennu asteroids. The presence of unique and rare lithologies in the Aguas Zarcas, that are distinct from typical CM chondrite lithologies, indicates a complex mixing of various materials in a highly dynamic environment.

Imene Kerraouch↗
NASA NTRSDate not supplied

Impact histories inferred from exogenic boulders on asteroids Ryugu and Bennu

Rubble-pile asteroids, such as (162173) Ryugu and (101955) Bennu, are formed as a result of catastrophic disruption of a parent body and re-accumulation of the fragments by self-gravity. Therefore, reaccumulated rubble piles could include mixtures of materials from both the parent body and its catastrophic impactor, as they did in the case of 2008 TC3 and the Almahata Sitta meteorites (Jenniskens et al. 2009). Indeed, six unusually bright, basaltic, meter-scale boulders were recently identified on Bennu’s dark surface (DellaGiustina et al. 2021), and their close spectral matches to the Howardite-Eucrite-Diogenite (HED) meteorites and Vesta family members indicate that they originated from asteroid (4) Vesta. In parallel, bright exogenic anhydrous-silicate–rich materials were found on Ryugu (Tatsumi et al. 2021). The bright boulders on Ryugu are consistent with ordinary chondrite meteorites, based on their albedo and weak or even absent absorption band at 2 µm. These exogenous materials on the surfaces of rubble-pile asteroids could be a key to constraining their specific impact conditions and collisional evolution. In this study, we report further study of the visible spectrophotometry and morphology of exogenic boulders on Ryugu and Bennu using two multi-band cameras: the telescopic Optical Navigation Camera (ONC-T) onboard the Hayabusa2 spacecraft, and MapCam onboard the Origins, Spectral Interpretation, Resource Identification, and Security–Regolith Explorer (OSIRIS-REx) spacecraft, respectively. For Ryugu, we first detected objects with peak reflectance brighter by a factor of >1.5 than the surrounding area. Tatsumi et al. (2021) found two spectral groups among the bright boulders: S-type with an absorption near 1 µm and C/X-type with a flat spectrum. That study found 6 S-types and 15 C/X-types, and in this work we additionally find one S-type and ~70 C/X-types. We found that S-type bright boulders follow two parallel trends consistent with space weathering of ordinary chondrites. Fragments from projectiles suggest that Ryugu may not have formed directly from the original parent body, i.e., it is from a second or higher generation of collisional descendants (Sugimoto et al. in revision). For Bennu, we directly surveyed absorption near 1 µm, which is indicative of anhydrous silicates. We propose 77 objects of exogenic origin including 6 boulders previously reported by DellaGiustina et al. (2021). We find that proposed exogenic objects follow two mixing trends with respect to the average spectrum of Bennu (Tatsumi and Popescu et al. submitted). One trend can be explained by mixing with HED as discussed in DellaGiustina et al. (2021), and the other trend can be explained by mixing with another, olivine-rich composition. Near-infrared spectra also support the possibility of multiple compositions among exogenic objects on Bennu. Thus, similar to Ryugu, Bennu could represent a second or higher generation. Using high-resolution images, we found that more than half of the exogenic objects that we identified on Bennu have breccia-like or inclusion-like morphologies. We do not observe a correlation between morphology and spectral shape. Direct comparison of reflectance spectra of exogenic object spectra between Ryugu and Bennu suggests a compositional difference. Furthermore, the number density of exogenic objects > 0.5 m on Bennu is ~40 times that on Ryugu (Tatsumi and Popescu et al. submitted). Bennu exhibits much more contamination from exogenic materials than Ryugu, which likely reflects differences in impact conditions, such as impact velocity and impactor size.

E. Tatsumi↗
NASA NTRSDate not supplied

Exploring A Lunar Landslide Deposit In The Taurus-Littrow Valley (TLV). Variations In Mineralogy And Mineral Volatile Traps.

The double drive tube core sample (73001/73002), collected at Station 3 during the Apollo 17 mission, penetrated a lunar landslide deposit that was transported from the slope of the South Massif into the TLV (Figure 1). Orbital data suggest that this deposit represents multiple events that were triggered by movement along the Lee-Lincoln scarp [e.g., 1] or impact events [e.g., 2,3]. Although numerous core and trench samples were collected during the Apollo pro-gram and numerous landslide deposits have been identified on the lunar surface by orbital missions [e.g., 3], the Station 3 double drive tube is the only core that penetrated a landslide deposit. The intentions of our study are: to establish the stratigraphy of the deposit; to better understand the processes at work during the event(s), including the role of volatiles in the event(e.g., fluidization-enabled flow, escape of fluidizing volatiles) [1] and the capability of deposits for trapping indigenous volatiles; the number of landslide events; and the trigger(s) of such events. Here, we report some initial petrologic observations of the < 1mm fraction of the regolith. A companion abstract [4] emphasizes <1 mm lithic fragments, compares them to surface lithologies, and to > 4 mm lithic fragments.

M J Cato↗