Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “FLAMES”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,333 records · Page 74
All sourcesNASA NTRSDOE OSTI
NASA NTRS1977

Formation of Na2SO4 and K2SO4 in flames doped with sulfur and alkali chlorides and carbonates

High pressure, free-jet expansion, mass spectrometric sampling was used to identify directly and to measure reaction products formed in doped methane-oxygen flames. Flames were doped with SO2 or CH3SH and sodium or potassium chlorides or carbonates. Gaseous NA2SO4 or K2S04 molecules were formed in residence times on the order of msec for each combination of dopants used. Composition profiles of combustion products were measured and compared with equilibrium thermodynamic calculations of product composition.

Fryburg, G. C.↗
NASA NTRS1978

Investigation of light scattering as a technique for detecting discrete soot particles in a luminous flame

The practicability of using a classical light-scattering technique, involving comparison of angular scattering intensity patterns with theoretically determined Mie and Rayleight patterns, to detect discrete soot particles (diameter less than 50 nm) in premixed propane/air and propane/oxygen-helium flames is considered. The experimental apparatus employed in this investigation included a laser light source, a flat-flame burner, specially coated optics, a cooled photomultiplier detector, and a lock-in voltmeter readout. Although large, agglomerated soot particles were detected and sized, it was not possible to detect small, discrete particles. The limiting factor appears to be background scattering by the system's optics.

Source record↗
NASA NTRS1977

Formation of Na2SO4 and K2SO4 in flames doped with sulfur and alkali chlorides and carbonates

High pressure, free-jet expansion, mass spectrometric sampling was used to identify directly and to measure reaction products formed in doped methane-oxygen flames. Flames were doped with SO2 or CH3SH and sodium or potassium chlorides or carbonates. Gaseous Na2SO4 or K2SO4 molecules were formed in residence times on the order of 1 msec for each combination of dopants used. Composition profiles of combustion products were measured and compared with equilibrium thermodynamic calculations of product composition.

Fryburg, G. C.↗
NASA NTRS1979

Flat-flame burner

Aqueous solutions of inorganic salts are aspirated and then nebulized into mixing chamber of flat-flame burner to study behavior of inorganic salts in flames.

Fryburg, G. C.↗
NASA NTRS1975

Approaches to flame resistant polymeric materials

Four research and development areas are considered for further exploration in the quest of more flame-resistant polymeric materials. It is suggested that improvements in phenolphthalein polycarbonate processability may be gained through linear free energy relationship correlations. Looped functionality in the backbone of a polymer leads to both improved thermal resistance and increased solubility. The guidelines used in the pyrolytic carbon production constitute a good starting point for the development of improved flame-resistant materials. Numerous organic reactions requiring high temperatures and the techniques of protected functionality and latent functionality constitute the third area for exploration. Finally, some well-known organic reactions are suggested for the formation of polymers that were not made before.

Liepins, R.↗
NASA NTRS1979

An experimental study of the flow field and pollutant formation in a two dimensional premixed, turbulent flame

Spark shadowgraphs, high-speed schlieren movies, and the tracing of individual eddies were used to study a turbulent reacting shear layer in a premixed propane/air flow. The flow took place in a two-dimensional combustor, and the flame was stabilized behind a rearward facing streamlined step. The data show that in the velocity range 7.5 to 22.5 m/sec the mixing layer is dominated by Brown-Roshko type large coherent structures in both reacting and nonreacting flows. Information on the eddies, the flame, and the distribution of gas concentrations is presented.

Ganji, A. R.↗
NASA NTRS1979

Coherent anti-Stokes Raman spectroscopy - Spectra of water vapor in flames

The results of experimental measurements of the coherent anti-Stokes Raman spectra of water vapor in flames are reported. A pulsed, frequency-doubled neodymium laser was used to supply the pump beam and to pump a dye laser to provide a broadband Stokes beam at 6600 A. Spectra were obtained in the postflame region of a premixed methane-air flame in the Raman frequency shift region of the symmetric stretch mode (3651.7 kaysers) at an approximate temperature of 1675 K. A theoretical calculation of the coherent anti-Stokes Raman spectrum of water vapor at this temperature was made, taking into account only isotropic Q-branch transitions, and using the energy level data of Floud et al. (1976). The theoretical prediction is shown essentially to reproduce all qualitative features of the experimental spectrum, and to exhibit a strong temperature dependence.

Hall, R. J.↗
NASA NTRS1980

Detonation-flame arrester devices for gasoline cargo vapor recovery systems

Empirical data on the deflagration-to-detonation run-up distance for flowing mixtures of gasoline and air in 15.2-cm- (6.0-in.-) diameter piping simulating a vapor recovery system are presented. The quenching capability of eight selected flame control devices subjected to repeated stable detonations was evaluated. The successful detonation-flame arresters were: (1) spiral-wound, crimped aluminum ribbon, (2) foamed nickel-chrome metal, (3) vertically packed bed of aluminum Ballast rings, and (4) water-trap or hydraulic back-pressure valve. Installation configurations for two of the more applicable arresters, the spiral-wound, crimped stainless-steel ribbon and the vertically packed bed of aluminum Ballast rings, were further optimized by a series of parametric tests. The final configuration of these two arresters was demonstrated with repeated detonation tests at conditions that simulated vapor recovery system operation. On these tests, the combustible mixture of gasoline and air continued to flow through the piping for periods up to 120 seconds after the initial detonation had been arrested. There was no indication of continuous burning or reignition occurring on either side of the test arresters.

Bjorklund, R. A.↗
NASA NTRS1980

Buoyancy effects on flames spreading down thermally thin fuels

Experiments show that buoyancy influences the downward spread rate of flames consuming thermally thin fuel beds. For index cards (0.0098 cm half-thickness) and adding-machine tape (0.0043 cm half-thickness), an increase in the buoyancy level causes the spread rate to drop until no flame propagation is possible. A dimensionless spread rate is found to correlate with a Damkoehler number. As the Damkoehler number increases with decreasing buoyancy level brought about by an increase in pressure or a decrease in gravity, the dimensionless spread rate approaches unity. It is also found that a small change in orientation with respect to the vertical is equivalent to a change in the magnitude of gravity in the direction of spread, and power-law relations between the dimensional spread rate and pressure are only valid over a small pressure range.

Altenkirch, R. A.↗
NASA NTRS1980

Raman spectroscopy of premixed CH4/N20 flames

Spontaneous Raman spectroscopy was used to make temperature and number density profile measurements in CH4/N20 flames. Preliminary measurements above the primary reaction zone agree with thermochemical equilibrium calculations. A temperature profile was measured through the primary reaction zone of this flame. This profile clearly demonstrates the capability of this diagnostic tool to make accurate temperature measurements with good spatial resolution.

Beyer, R. A.↗
NASA NTRS1981

Spectral flame radiance from a tubular-can combustor

An experimental investigation was conducted to determine the effects of fuel type, fuel-air ratio, and inlet-air pressure on the spectral flame radiance emanating from a JT8D can combustor. Spectral radiance measurements from 1.55 to 5.5 micrometers of wavelength were recorded and analyzed to determine soot concentration and flame temperature at various axial locations in the combustor. Two fuels differing in volatility, viscosity, and chemical composition were used in this investigation.

Claus, R. W.↗
NASA NTRS1981

Heat sealable, flame and abrasion resistant coated fabric

Flame retardant, abrasion resistant elastomeric compositions are comprised of thermoplastic polyurethane polymer and flame retarding amounts of a filler selected from decabromodiphenyloxide and antimony oxide in a 3:1 weight ratio, and decabromodiphenyloxide, antimony oxide, and ammonium polyphosphate in a 3:1:3 weight ratio respectively. Coated fabrics employing such elastomeric compositions as coating film are flexible, lightweight, and air impermeable and can be made using heat or dielectric sealing procedures.

Tschirch, R. P.↗
NASA NTRS1982

Plane flame furnace combustion tests on JPL desulfurized coal

The combustion characteristics of three raw bituminous (PSOC-282 and 276) and subbituminous (PSOC-230) coals, the raw coals partially desulfurized (ca -60%) by JPL chlorinolysis, and the chlorinated coals more completely desulfurized (ca -75%) by JPL hydrodesulfurization were determined. The extent to which the combustion characteristics of the untreated coals were altered upon JPL sulfur removal was examined. Combustion conditions typical of utility boilers were simulated in the plane flame furnace. Upon decreasing the parent coal voltaile matter generically by 80% and the sulfur by 75% via the JPL desulfurization process, ignition time was delayed 70 fold, burning velocity was retarded 1.5 fold, and burnout time was prolonged 1.4 fold. Total flame residence time increased 2.3 fold. The JPL desulfurization process appears to show significant promise for producing technologically combustible and clean burning (low SO3) fuels.

Reuther, J. J.↗
NASA NTRS1982

A coalescence/dispersion model for turbulent flame stability

A stochastic mixing model is employed that couples finite rate mixing with finite rate combustion chemistry to examine the effects of combustor inlet conditions on the ignition limits of lean premixed turbulent flames. The kinetics of the fuel-oxidation process is described by means of a two-step reaction mechanism. The model predictions of the lean ignition limits of premixed turbulent propane-air flames are verified through comparisons with data in the literature. The variations of the lean limits are found to compare favorably with experimental magnitudes and trends.

Radhakrishnan, K.↗
NASA NTRS1982

Buoyancy effects on the temperature field in downward spreading flames

It is shown that flames which spread vertically down thermally thin fuels at the same Damkoehler number, and therefore have the same dimensionless spread rate, also have the same dimensionless temperature fields irrespective of differences in physical size. The Frey and Tien (1976) effects of pressure on flame size are due to the effects of pressure on the character of the induced buoyant flow.

Altenkirch, R. A.↗
NASA NTRS1982

Molecular-beam sampling study of extinguishment of methane-air flames by dry chemicals

The use of Al2O3, NaHCO3, KHCO3, NH4H2PO4 and KCl powders for the inhibition of a methane/oxygen diffusion flame is studied through measurement of composition and temperature profiles, using a molecular beam mass spectrometer sampling system. In order to obtain significant inhibition without extinguishing the flame, a powder feeding rate of 2 mg/liter of gas was used for KCl and Al2O3, and of 3 mg/liter of gas for the remaining powders. CH4, O2, N2, H2O and CO2 concentrations were measured by the mass spectrometer, while temperature was measured by the time-of-flight technique. For the powder feeding rates used, Al2O3 was the least and KCl and NH2H4PO2 the most effective in reducing temperature; in reaction-inhibition effectiveness, Al2O3 was again lowest while KCl was superior to all others. Because the KCl concentration was only 2/3 that of NH4H2PO4, it is recommended as the most effective temperature reducer and reaction inhibitor.

Knuth, E. L.↗
NASA NTRS1984

Flame-Test Chamber

Experimental chamber provides controlled environment for observation and measurement of flames propagating in expanding plume of flammable air/fuel mixture under atmospheric conditions. Designed to evaluate quenching capability of screen-type flame arresters in atmospheric vents of fuel cargo tanks aboard marine cargo vessels.

Bjorklund, R. A.↗
NASA NTRS1983

Parametric study of flame radiation characteristics of a tubular-can combustor

A series of combustor tests were conducted with a tubular-can combustor to study flame radiation characteristics and effects with parametric variations in combustor operating conditions. Two alternate combustor assemblies using a different fuel nozzle were compared. Spectral and total radiation detectors were positioned at three stations along the length of the combustor can. Data were obtained for a range of pressures from 0.34 to 2.07 MPa (50 to 300 psia), inlet temperatures from 533 to 700K (500 to 800 F), for Jet A (13.9 deg hydrogen) and ERBS (12.9% hydrogen) fuels, and with fuel-air ratios nominally from 0.008 to 0.021. Spectral radiation data, total radiant heat flux data, and liner temperature data are presented to illustrate the flame radiation characteristics and effects in the primary, secondary, and tertiary combustion zones.

Humenik, F. M.↗