Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Exchange interaction”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,333 records · Page 74

Determination of the anisotropies and reversal process in exchange-bias bilayers using a rotational magnetization curve approach

Rotational magnetization curves of the exchange-bias bilayers were investigated based on the Stoner-Wohlfarth model, which can be grouped into three cases according to the magnetization reversal process. The unidirectional anisotropic field H{sub E} = 41.4 Oe, the uniaxial anisotropic field H{sub k} = 4.2 Oe and the accurate direction of the easy axis of our FeNi/FeMn exchange-bias bilayers were obtained by fitting their experimental rotational magnetization curves. During the rotational process the magnetization reversal of the bilayers is a coherent rotation with a critical magnetization reversal field H{sub 1} = 41.372 Oe.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Anisotropy induced large exchange bias behavior in ball milled Ni-Co-Mn-Sb alloys

We report the effect of decrease in the grain size on the structural, magnetic and exchange bias (EB) behavior in ball milled Ni{sub 50-x}Co{sub x}Mn{sub 38}Sb{sub 12} (x=0 and 5) Heusler alloys. The existence of a wide range of grain sizes in the ball milled samples results in dramatic changes in the structural and magnetic properties. For x=0, a large EB field of 3.2 kOe is observed in the ball milled sample, compared to a value of 245 Oe of the bulk sample. This increase is attributed to the enhanced exchange coupling between the soft and hard magnetic particles.

36 MATERIALS SCIENCE↗

Configuration and temperature dependence of magnetic damping in spin valves

Using vector-analyzer ferromagnetic resonance, we have studied the microwave susceptibility of a Py/Co/Cu/Co/MnIr spin valve over a large temperature range (5-450 K) and as a function of the magnetic configuration. An effective magnetization and Gilbert damping constant of 1.1 T and 0.021, respectively, are found for the permalloy free layer, with no discernible variation in temperature observed for either quantities. In contrast, the pinned layer magnetization is reduced by heating, and the exchange bias collapses near a temperature of 450 K. The ferromagnetic resonance linewidth of the free layer increases by 500 MHz when the layer magnetizations are aligned in antiparallel, which is attributed to a configuration-dependent contribution to the damping from spin pumping effects.

36 MATERIALS SCIENCE↗

Aligned and exchange-coupled FePt-based films

Two-phase nanostructures of hard L1{sub 0}-ordered FePt and soft iron-rich fcc Fe-Pt are investigated experimentally and by model calculations. The Fe-Pt thin films were produced by epitaxial co-sputtering onto MgO and have a thickness of about 10 nm. They form two-phase dots that cover a large fraction of the surface but are separated from each other. X-ray diffraction and TEM show that the c-axis of the phase FePt is aligned in the direction normal to the film plane. The experimental and theoretical hysteresis loops indicate archetypical exchange coupling, and excellent magnetic properties are obtained. The largest values of coercivity, saturation magnetization, and nominal energy product obtained in the samples studied are 51 kOe, 1287 emu/cc, and 54 MGOe, respectively.

36 MATERIALS SCIENCE↗

Bi-quadratic interlayer exchange coupling in Co{sub 2}MnSi/Ag/Co{sub 2}MnSi pseudo spin-valve

Bi-quadratic interlayer exchange coupling is found below 100 K in a Co{sub 2}MnSi/Ag/Co{sub 2}MnSi current-perpendicular-to-plane pseudo spin valves. The bi-quadratic coupling constant J{sub 2} was estimated to be {approx}-0.30 erg/cm{sup 2} at 5 K and the strong temperature dependence of the coupling strength points its likely origin to the ''loose spin'' model. Application of current of {approx}2 x 10{sup 7} A/cm{sup 2} below 100 K leads to an increase in the magnetoresistance (MR), indicating current induced antiparallel alignment of the two magnetic layers. These results strongly suggest that the presence of the bi-quadratic interlayer exchange coupling causes the reduction of the magnetoresistance at low temperature and illustrates the importance of understanding the influence of interlayer exchange coupling on magnetization configuration in magnetic nanostructures.

36 MATERIALS SCIENCE↗

Structure and exchange bias of Ni{sub 50}Mn{sub 37}Sn{sub 13} ribbons

Ni{sub 50}Mn{sub 37}Sn{sub 13} ribbons were produced by the melt-spinning method. Structure and magnetic measurements on the Ni{sub 50}Mn{sub 37}Sn{sub 13} ribbons indicated that it is ferromagnetic below 340 K and undergoes an austenitic-to-martensitic phase transition just below room temperature. The austenitic phase has the cubic L2{sub 1} structure, with the excess manganese atoms occupying the 4(b) sites. The martensitic phase has an orthorhombic structure. With increasing applied magnetic field, the martensite start temperature M{sub s} and martensite finish temperature M{sub f} shift to lower temperatures because of the field-induced phase transition. The exchange-bias effect is observed and strongly varied with different cooling fields at low temperature. At 5 K, the exchange-bias field reaches a maximum of 290 Oe when the cooling field increases to 200 Oe, and then reduces sluggishly with further increase of the cooling field because of weakening of exchange coupling between antiferromagnetic and ferromagnetic interfaces.

36 MATERIALS SCIENCE↗

The magnetic Curie temperature and exchange coupling between cations in tetragonal spinel oxide Mn{sub 2.5}M{sub 0.5}O{sub 4} (M = Co, Ni, Mn, Cr, and Mg) films

Mn{sub 3}O{sub 4} is a Jahn-Taller tetragonal ferrite that has a relatively low Curie temperature (T{sub c}) of {approx}43 K due to weak coupling between the canting spins. In this study, we fabricated a series of 100-nm-thick Mn{sub 2.5}M{sub 0.5}O{sub 4} (M = Co, Ni, Mn, Cr, and Mg) films via oxygen-plasma-assisted molecular beam epitaxy and measured the structural and magnetic properties of these films. These films show single phase quality, and the c-axis lattice parameter of pure Mn{sub 3}O{sub 4} is 0.944 nm, with a c/a ratio {approx}1.16, consistent with the bulk values. The replacement of Mn by M (M = Co, Ni, Cr, and Mg) changes the lattice parameters, and the c/a ratio varies between 1.16 and 1.06 depending upon the cation distribution of the films. The magnetic Curie temperatures of these films also vary in the range of 25-66 K in that Ni and Co enhance the T{sub c} whereas Mg reduces the T{sub c} (Cr shows no effect on the T{sub c}). These changes to the T{sub c} are related to both the element electronic state and the cation distributions in these compounds. As a non-collinear spin configuration can induce electrical polarization, the present study provides a systematic way to enhance the magnetic transition temperature in tetragonal spinel ferrites.

36 MATERIALS SCIENCE↗

Investigation on the antiferromagnetic component in the intrinsic exchange bias in structurally single phase Cr{sub 2}Te{sub 3} thin film

We report the intrinsic exchange bias in structurally single phase Cr{sub 2}Te{sub 3} thin film grown by low temperature molecular beam epitaxy. The hysteresis loop shift is confirmed due to the ferromagnet/antiferromagnet coupling rather than surface spin disorder effect or minor loop effect. The AFM component attributing to the exchange bias stems from the vacancy Cr layer in Cr{sub 2}Te{sub 3} and is of two dimensions. The magnetic properties of the AFM component are investigated by studying the temperature dependence and the measure field dependence of coercivity and hysteresis loop shift. The blocking temperature is determined to be about 110 K. It is found that the two dimensional AFM component would lose its irreversibility for larger applied measure field.

36 MATERIALS SCIENCE↗

Aligned and exchange-coupled L1{sub 0} (Fe,Co)Pt-based magnetic films

Films of aligned L1{sub 0}-structure (Fe,Co)Pt with fcc Fe(Co,Pt) are synthesized by co-sputtering Fe, Co, and Pt on an (001) MgO substrate with in situ heating at 830 deg. C. The nanostructures and magnetic properties of the films are characterized by X-ray diffraction (XRD), transmission electron microscopy (TEM), and superconducting quantum interference device (SQUID). The compositions of the samples (Fe,Co){sub x}Pt{sub 1-x} are designed to maintain an atomic Fe: Co ratio of 65: 35 while increasing the Fe,Co content in each successive sample. In samples with low Fe and Co concentration, the XRD patterns exhibit three strong peaks, namely L1{sub 0} (Fe,Co)Pt (001), L1{sub 0} (Fe,Co)Pt (002), and MgO (002). A fourth peak is observed in samples with high Fe and Co concentration and identified as fcc (002). The XRD patterns confirm the formation of L1{sub 0}-ordered (Fe,Co)Pt and its epitaxial growth on MgO. TEM shows that the (Fe,Co)Pt films form isolated magnetic grains of about 100 nm in diameter. Hysteresis-loop measurements show that the increase of the Fe,Co concentration from 57.3 to 68.3 at % enhances the saturation magnetization M{sub s} from 1245 emu/cm{sup 3} to 1416 emu/cm{sup 3}, and the coercivity decreases from 32 kOe to 8.9 kOe. The nominal maximum energy product per grain is 64 MGOe.

36 MATERIALS SCIENCE↗

Interface roughness induced asymmetric magnetic property in sputter-deposited Co/CoO/Co exchange coupled trilayers

The effect of interface roughness on magnetic properties of exchange coupled polycrystalline Co/CoO(t{sub AF})/Co trilayers has been investigated by varying antiferromagnetic layer (CoO) thickness. It has been found that the upper CoO/Co interface becomes rougher with increasing CoO layer thickness, resulting in stronger exchange bias of the upper interface than the lower one. The interfacial exchange coupling is strengthened by the increase of defect-generated uncompensated antiferromagnetic spins; such spins form coupling with spins in the Co layer at the interface. As a result, the CoO layer thickness dependence of exchange bias is much enhanced for the upper Co layer. The transition from anisotropic magnetoresistance to isotropic magnetoresistance for the top Co layer has also been found. This could be attributed to the defects, probably partial thin oxide layers, between Co grains in the top Co layer that leads a switch from spin-orbit scattering related magnetoresistance to spin-dependent electron scattering dominated magnetoresistance.

36 MATERIALS SCIENCE↗

Tailoring interfacial exchange coupling with low-energy ion beam bombardment: Tuning the interface roughness

By ascertaining NiO surface roughness in a Ni{sub 80}Fe{sub 20}/NiO film system, we were able to correlate the effects of altered interface roughness from low-energy ion-beam bombardment of the NiO layer and the different thermal instabilities in the NiO nanocrystallites. From experiment and by modelling the temperature dependence of the exchange bias field and coercivity, we have found that reducing the interface roughness and changing the interface texture from an irregular to striped conformation enhanced the exchange coupling strength. Our results were in good agreement with recent simulations using the domain state model that incorporated interface mixing.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Influence of boron doping on magnetic properties and microwave characteristics of MnIr/FeCoB multilayers

A detailed investigation of the influence of B doping on the magnetic properties and high frequency characteristics of FeCoB/MnIr multilayered thin films was carried out. Exchange bias was found to decrease monotonically with B doping possibly due to less favorable of AF phase of MnIr in the samples with rich B concentration. However, with small amount of doping up to 9% of B concentration, the MnIr fcc (111) peaks become more prominent and the real part of permeability enhanced. Our results suggest no correlation between the structural phase of MnIr and the exchange bias. Also, the influences of B doping on several static and dynamic parameters, such as rotational magnetic anisotropy field, coercivity, saturation magnetization, resonance frequency, and effective damping factor are presented and discussed. Our results support the claim that the coercivity enhancement and the arising of rotational anisotropy may have the same physical origin.

36 MATERIALS SCIENCE↗

Direct manipulation of the uncompensated antiferromagnetic spins in exchange coupled system by GeV ion irradiation

Incident ion energy to matrix electrons of a material is dissipated within a narrow cylinder surrounding the swift heavy ion path. The temperature of the lattice exceeds the melting point and upon quenching causes nanometric modifications. We present here a unique ex situ approach in manipulating the uncompensated spins in antiferromagnetic layers of ferro-/antiferromagnetic exchange coupled systems on a nanometric scale. We use the impact of relativistic heavy ion (1-2 GeV) irradiation on such systems. We find an increase in the bias field and a restoration of the reversal via domain nucleation in the trained state. These are identified as plausible results of ion-induced antiferromagnetic ordering with little or no effect on the layer structure. This study demonstrates, therefore, the possibility of nanoscale tailoring of exchange coupled systems that survive even in the trained state.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Influence of intergranular exchange coupling on the magnetization dynamics of CoCrPt:SiO{sub 2} granular media

We investigate the effect of Co{sup +} irradiation on the magnetization dynamics of CoCrPt:SiO{sub 2} granular media. Increasing irradiation levels reduce the saturation magnetization and effective anisotropy, which decrease the intrinsic magnetization precession frequency. Furthermore, increasing intergranular exchange coupling results in a qualitative change in the behavior of the magnetic material from a collection of individual grains to a homogeneous thin film, as evidenced in both the switching behavior and dynamics. The frequency change cannot be explained by single crystal macrospin modeling, and can only be reproduced by the inclusion of the dipolar effects and anisotropy distribution inherent in a granular medium.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Tuning the direction of exchange bias in ferromagnetic/antiferromagnetic bilayer by angular-dependent spin-polarized current

The angular dependence of an external magnetic field applied with an in-plane alternating pulse that induces a new direction of exchange bias (EB) is observed in an NiFe/IrMn bilayer. Depending strongly on the direction of the external field, EB field gradually orients along the external field with the increase in current pulse, and the new direction of EB is finally established. Furthermore, the new direction of EB can also be induced along the external field at once when the applied pulse is larger than the critical current. Because the strength and direction of the EB is highly correlated with the micromagnetic state distribution of the antiferromagnet, the observations are explained by the spin torque exerted on the antiferromagnetic moments and provide evidence for the prediction of spin transfer and current-induced switching in antiferromagnets.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Exchange bias properties of [Co/CoO]{sub n} multilayers

In this study, the exchange bias properties of four polycrystalline multilayer stack samples of antiferromagnetic (AF) CoO and ferromagnetic (FM) Co in the form of [CoO/Co]{sub n} with n = 1, 2, 3, and 5 are reported. The samples were grown on top of Si (001) substrates by using magnetron sputtering method. X-ray photoelectron spectroscopy (XPS) and transmission electron microscopy (TEM) were used to determine the structural properties of the samples. XPS measurements of cobalt oxide layer revealed the coexistence of different phases in cobalt oxide as CoO and Co{sub 3}O{sub 4}, the latter of which lowers the blocking temperature. The blocking temperature is also affected by the finite size scaling effects observed in AF layers. In-plane ferromagnetic resonance (FMR) measurements revealed uniaxial in-plane magnetic anisotropy for the samples. Low temperature vibrating sample magnetometer measurements provided exchange bias with a stepwise character. Observed steps are believed to be due to magnetization reversals of individual FM layers with varying thicknesses, each of which is pinned through two interfaces from above and below with two AFM layers, except the uppermost FM Co layer with a single AFM neighbor.

36 MATERIALS SCIENCE↗

Influence of growth and annealing conditions on low-frequency magnetic 1/f noise in MgO magnetic tunnel junctions

Magnetic 1/f noise is compared in magnetic tunnel junctions with electron-beam evaporated and sputtered MgO tunnel barriers in the annealing temperature range 350 - 425 Degree-Sign C. The variation of the magnetic noise parameter ({alpha}{sub mag}) of the reference layer with annealing temperature mainly reflects the variation of the pinning effect of the exchange-bias layer. A reduction in {alpha}{sub mag} with bias is associated with the bias dependence of the tunneling magnetoresistance. The related magnetic losses are parameterized by a phase lag {epsilon}, which is nearly independent of bias especially below 100 mV. The similar changes in magnetic noise with annealing temperature and barrier thickness for two types of MgO magnetic tunnel junctions indicate that the barrier layer quality does not affect the magnetic losses in the reference layer.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Spacer-less, decoupled granular L1{sub 0} FePt magnetic media using Ar-He sputtering gas

Spacer materials are often used to fabricate granular L1{sub 0} FePt media and reduce the grain size, however, at the expense of reduced out-of-plane coercivity. Here, we demonstrate a spacer-less method in which adding 1% helium to argon sputtering gas leads to a substantial improvement in the chemical ordering, as well as the magnetic and microstructural properties of FePt. This change is attributed to the modification in the ion current density of the plasma caused by the excited metastable helium species. Helium plays a pivotal role in providing the Fe and Pt atoms optimal adatom mobility, thereby, producing well-ordered L1{sub 0} FePt media. This leads to an enhancement of the out-of-plane coercivity from 15 to 22 kOe. Furthermore, exchange decoupled grains with a twofold reduction in their diameter to {approx}24 nm are also achieved. These properties are crucial for magnetic media of the future for data storage recording densities beyond 1 Tb/in{sup 2}.

36 MATERIALS SCIENCE↗