Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Embedded Systems”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,333 records · Page 74

Solving larger maximum clique problems using parallel quantum annealing

Quantum annealing has the potential to find low energy solutions of NP-hard problems that can be expressed as quadratic unconstrained binary optimization problems. However, the hardware of the quantum annealer manufactured by D-Wave Systems, which we consider in this work, is sparsely connected and moderately sized (on the order of thousands of qubits), thus necessitating a minor-embedding of a logical problem onto the physical qubit hardware. The combination of relatively small hardware sizes and the necessity of a minor-embedding can mean that solving large optimization problems is not possible on current quantum annealers. In this research, we show that a hybrid approach combining parallel quantum annealing with graph decomposition allows one to solve larger optimization problem accurately. We apply the approach to the Maximum Clique problem on graphs with up to 120 nodes and 6395 edges.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

An Evaluation of Molecular Dynamics Performance on the Hybrid Cray XK6 Supercomputer

For many years, the drive towards computational physics studies that match the size and time-scales of experiment has been fueled by increases in processor and interconnect performance that could be exploited with relatively little modification to existing codes. Engineering and electrical power constraints have disrupted this trend, requiring more drastic changes to both hardware and software solutions. Here, we present details of the Cray XK6 architecture that achieves increased performance with the use of GPU accelerators. We review software development efforts in the LAMMPS molecular dynamics package that have been implemented in order to utilize hybrid high performance computers. We present benchmark results for solid-state, biological, and mesoscopic systems and discuss some challenges for utilizing hybrid systems. We present some early work in improving application performance on the XK6 and performance results for the simulation of liquid copper nanostructures with the embedded atom method.

42 ENGINEERING↗

Cavitation-Induced Stiffness Reductions in Quantum Dot–Polymer Nanocomposites

The elastic stiffness of two polymer nanocomposite systems is investigated. The nanoscale fillers comprise cadmium selenide (CdSe, ~4 nm) and cadmium selenide/cadmium sulfide (CdSe/CdS, ~13 nm) quantum dots (QDs). The QDs are embedded within an electrospun structural block copolymer, poly(styrene-ethylene-butylene-styrene) (SEBS). Tensile testing shows a monotonic decrease in the tensile Young's modulus with increasing partially phase-separated QD concentration; this is to be compared to corresponding nanocomposites reinforced with nanorod (NR) and tetrapod (TP)-SEBS nanocomposites which show a monotonic increase with particle loading. While most studies to date emphasize the increase in Young's modulus in polymer nanocomposites at higher reinforcement loadings, few focus on the tunability of the modulus from reductions in stiffness. The present work reveals up to an ~80% reduction in tensile Young's modulus with the addition of 5 vol % of QDs to electrospun SEBS. In this study, we sought mechanistic insight into this reduction in composite stiffness using a 2D lattice spring model. Simulation results reveal that the stiffness decrease with the addition of QD reinforcements is likely due to cavitation in the polymer in the vicinity of the QD aggregates arising from polymer debonding under tension. We anticipate that this study, performed with a commonly used structural rubber, may find use in designing polymer-matrix nanocomposite fibers with specific Young's moduli for applications requiring a tunable lower stiffness material.

36 MATERIALS SCIENCE↗

Quasiparticle electronic structure of phthalocyanine:TMD interfaces from first-principles GW

Interfaces formed between monolayer transition metal dichalcogenides and (metallo)phthalocyanine molecules are promising in energy applications and provide a platform for studying mixed-dimensional molecule-semiconductor heterostructures in general. An accurate characterization of the frontier energy level alignment at these interfaces is key in the fundamental understanding of the charge transfer dynamics between the two photon absorbers. Here, we employ the first-principles substrate screening GW approach to quantitatively characterize the quasiparticle electronic structure of a series of interfaces: metal-free phthalocyanine (H 2 Pc) adsorbed on monolayer MX 2 (M = Mo, W; X = S, Se) and zinc phthalocyanine (ZnPc) adsorbed on MoX 2 (X = S, Se). Furthermore, we reveal the dielectric screening effect of the commonly used α-quartz (SiO 2 ) substrate on the H 2 Pc:MoS 2 interface using the dielectric embedding GW approach. Our calculations furnish a systematic set of GW results for these interfaces, providing the structure–property relationship across a series of similar systems and benchmarks for future experimental and theoretical studies.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

PROTOPLANETARY DISK EVOLUTION AROUND THE TRIGGERED STAR-FORMING REGION CEPHEUS B

The Cepheus B (Cep B) molecular cloud and a portion of the nearby Cep OB3b OB association, one of the most active regions of star formation within 1 kpc, have been observed with the Infrared Array Camera detector on board the Spitzer Space Telescope. The goals are to study protoplanetary disk evolution and processes of sequential triggered star formation in the region. Out of {approx}400 pre-main-sequence (PMS) stars selected with an earlier Chandra X-ray Observatory observation, {approx}95% are identified with mid-infrared sources and most of these are classified as diskless or disk-bearing stars. The discovery of the additional >200 IR-excess low-mass members gives a combined Chandra+Spitzer PMS sample that is almost complete down to 0.5 M{sub sun} outside of the cloud, and somewhat above 1 M{sub sun} in the cloud. Analyses of the nearly disk-unbiased combined Chandra and Spitzer-selected stellar sample give several results. Our major finding is a spatio-temporal gradient of young stars from the hot molecular core toward the primary ionizing O star HD 217086. This strongly supports the radiation-driven implosion (RDI) model of triggered star formation in the region. The empirical estimate for the shock velocity of {approx}1 km s{sup -1} is very similar to theoretical models of RDI in shocked molecular clouds. The initial mass function (IMF) of the lightly obscured triggered population exhibits a standard Galactic field IMF shape. The unusually high apparent value of {approx}>70% star formation efficiency inferred from the ratio of star mass to current molecular gas mass indicates that most of the Cep B molecular cloud has been already ablated or transformed to stars. Contrary to the current RDI simulations, our findings indicate that star formation triggering by H II region shocks is not restricted to a single episode but can continue for millions of years. Other results include: (1) agreement of the disk fractions, their mass dependency, and fractions of transition disks with other clusters; (2) confirmation of the youthfulness of the embedded Cep B cluster; (3) confirmation of the effect of suppression of time-integrated X-ray emission in disk-bearing versus diskless systems.

79 ASTRONOMY AND ASTROPHYSICS↗

FIRST RESULTS FROM Z -FOURGE : DISCOVERY OF A CANDIDATE CLUSTER AT z = 2.2 IN COSMOS

We report the first results from the Z -FOURGE survey: the discovery of a candidate galaxy cluster at z = 2.2 consisting of two compact overdensities with red galaxies detected at {approx}> 20{sigma} above the mean surface density. The discovery was made possible by a new deep (K{sub s} {approx}< 24.8 AB 5{sigma}) Magellan/FOURSTAR near-IR imaging survey with five custom medium-bandwidth filters. The filters pinpoint the location of the Balmer/4000 A break in evolved stellar populations at 1.5 < z < 3.5, yielding significantly more accurate photometric redshifts than possible with broadband imaging alone. The overdensities are within 1' of each other in the COSMOS field and appear to be embedded in a larger structure that contains at least one additional overdensity ({approx}10{sigma}). Considering the global properties of the overdensities, the z = 2.2 system appears to be the most distant example of a galaxy cluster with a population of red galaxies. A comparison to a large {Lambda}CDM simulation suggests that the system may consist of merging subclusters, with properties in between those of z > 2 protoclusters with more diffuse distributions of blue galaxies and the lower-redshift galaxy clusters with prominent red sequences. The structure is completely absent in public optical catalogs in COSMOS and only weakly visible in a shallower near-IR survey. The discovery showcases the potential of deep near-IR surveys with medium-band filters to advance the understanding of environment and galaxy evolution at z > 1.5.

79 ASTRONOMY AND ASTROPHYSICS↗

ON THE SUPPORT OF NEUTRALS AGAINST GRAVITY IN SOLAR PROMINENCES

Cool and dense prominences found in the solar atmosphere are known to be partially ionized because of their relatively low temperature. In this Letter, we address the long-standing problem of how the neutral component of the plasma in prominences is supported against gravity. Using the multiple-fluid approach, we solve the time-dependent equations in two dimensions considering the frictional coupling between the neutral and ionized components of the magnetized plasma representative of a solar prominence embedded in a hot coronal environment. We demonstrate that given an initial density enhancement in the two fluids, representing the body of the prominence, the system is able to relax in the vicinity of magnetic dips to a stationary state in which both neutrals and ionized species are dynamically suspended above the photosphere. Two different coupling processes are considered in this study: collisions between ions and neutrals and charge exchange interactions. We find that for realistic conditions, ions are essentially static, while neutrals have a very small downflow velocity. The coupling between ions and neutrals is so strong at the prominence body that the behavior is similar to that of a single fluid with an effective density equal to the sum of the ion and neutral species. We also find that the charge exchange mechanism is about three times more efficient at sustaining neutrals than elastic scattering of ions with neutrals.

79 ASTRONOMY AND ASTROPHYSICS↗

Spectroscopic factors in dripline nuclei

Single-nucleon knockout reaction studies of the proton-dripline nuclei 9 C and 13 O suggest an appreciable suppression of spectroscopic factors. In this work, we calculate the one-neutron and one-proton spectroscopic factors for the mirror pair 9 C – 9 Li and 13 O using two variants of the continuum shell model: the complex-energy Gamow shell model and the real-energy shell model embedded in the continuum. Furthermore, our results indicate that the continuum effects strongly suppress the spectroscopic factors of well-bound orbits in the dripline systems but have less impact on the spectroscopic factors of weakly bound states.

6 ≤ A ≤ 19↗

Power System Event Identification Based on Deep Neural Network With Information Loading

Online power system event identification and classification are crucial to enhancing the reliability of transmission systems. In this study, we develop a deep neural network (DNN) based approach to identify and classify power system events by leveraging real-world measurements from hundreds of phasor measurement units (PMUs) and labels from thousands of events. Two innovative designs are embedded into the baseline model built on convolutional neural networks (CNNs) to improve the event classification accuracy. First, we propose a graph signal processing based PMU sorting algorithm to improve the learning efficiency of CNNs. Second, we deploy information loading based regularization to strike the right balance between memorization and generalization for the DNN. Numerical results based on real-world dataset from the Eastern Interconnection of the U.S power transmission grid show that the combination of PMU based sorting and the information loading based regularization techniques help the proposed DNN approach achieve highly accurate event identification and classification results.

24 POWER TRANSMISSION AND DISTRIBUTION↗

SU-G-JeP4-05: Effects of Irregular Respiratory Motion On the Positioning Accuracy of Moving Target with Free Breathing Cone-Beam Computerized Tomography

Purpose: Average or maximum intensity projection (AIP or MIP) images derived from 4DCT images are often used as a reference image for target alignment when free breathing Cone-beam CT (FBCBCT) is used for positioning a moving target at treatment. This method can be highly accurate if the patient has stable respiratory motion. However, a patient’s breathing pattern often varies irregularly. The purpose of this study is to investigate the effect of irregular respiration on the positioning accuracy of a moving target with FBCBCT. Methods: Eight patients’ respiratory motion curves were selected to drive a Quasar phantom with embedded cubic and spherical targets. A 4DCT of the moving phantom was acquired on a CT scanner (Philips Brilliance 16) equipped with a Varian RPM system. The phase binned 4DCT images and the corresponding MIP and AIP images were transferred into Eclipse for analysis. CBCTs of the phantom driven by the same breathing curves were acquired on a Varian TrueBeam and fused such that the zero positions of moving targets are the same on both CBCT and AIP images. The sphere and cube volumes and centrioid differences (alignment error) determined by MIP, AIP and FBCBCT images were compared. Results: Compared to the volume determined by FBCBCT, the volumes of cube and sphere in MIP images were 22.4%±8.8% and 34.2%±6.2% larger while the volumes in AIP images were 7.1%±6.2% and 2.7%±15.3% larger, respectively. The alignment errors for the cube and sphere with center-center matches between MIP and FBCBCT were 3.5±3.1mm and 3.2±2.3mm, and the alignment errors between AIP and FBCBCT were 2.1±2.6mm and 2.1±1.7mm, respectively. Conclusion: AIP images appear to be superior reference images than MIP images. However, irregular respiratory motions could compromise the positioning accuracy of a moving target if the target center-center match is used to align FBCBCT and AIP images.

60 APPLIED LIFE SCIENCES↗

Influence of defects formed by fast reactor neutrons on exciton luminescence spectra of cadmium sulfide single crystals

The influence of clusters of defects formed by irradiation with neutrons in CdS single crystals on parameters of the spectra of exciton photoluminescence at T {approx} 4.2 K has been studied. It is experimentally established that irradiation of the samples with fast reactor neutrons with energies E {approx} 1 MeV and dose {Phi} = 3 x 10{sup 18} cm{sup -2} brings about a decrease (by approximately 50 times) in the intensity of lines of exciton photoluminescence I{sub 1} ({lambda}{sub m} = 488.7 nm), I{sub 2} ({lambda}{sub m} = 486.9 nm), and I{sub 3} ({lambda}{sub m} = 486.3 nm) with redistribution of intensities in favor of the lines I{sub 1} and I{sub 3} and an increase in their half-width from 2 to 5-6 the positions of their peaks in the emission spectrum. Observed experimental facts are explained on the basis of a model of a two-phase system composed of slightly damaged region in the CdS single crystal in which clusters of defects (formed as a result of irradiation with neutrons) are embedded; these clusters are nanosized grains with a highly disordered structure.

36 MATERIALS SCIENCE↗

Equatorial waves triggering extreme rainfall and floods in southwest Sulawesi, Indonesia

On the basis of detailed analysis of a case study and long-term climatology, it is shown that equatorial waves and their interactions serve as precursors for extreme rain and flood events in the central Maritime Continent region of southwest Sulawesi, Indonesia. Meteorological conditions on January 22, 2019, leading to heavy rainfall and devastating flooding in this area were studied. It is shown that a convectively coupled Kelvin wave (CCKW) and a convectively coupled Rossby wave (CCERW) embedded within the larger-scale envelope of the Madden-Julian Oscillation (MJO) enhanced convective phase, contributed to the onset of a mesoscale convective system which developed over the Java Sea. Low-Level convergence from the CCKW forced mesoscale convective organization and orographic ascent of moist air over the slopes of southwest Sulawesi. Climatological analysis shows that 92 % of December-January-February floods and 76% of extreme rain events in this region were immediately preceded by positive low-level westerly wind anomalies. It is estimated that both CCKWs and CCERWs propagating over Sulawesi double the chance of floods and extreme rain event development, which the probability of such hazardous events occurring during their combined activity is eight times greater than on a random day. While the MJO is a key component shaping tropical atmospheric variability, it is shown that its usefulness as a single factor for extreme weather-driven hazard prediction is limited.

Latos, Beata↗

Performance Evaluation of Gray-box and Machine Learning Models of a Thermal Energy Storage System with Active Insulation

An interior partition wall integrated with active thermal storage and a dynamic insulation system was built and then installed in an office building in Oak Ridge, Tennessee, TN. This smart wall, termed the Empower Wall, was equipped with embedded pipes in the building envelope core component and an additional pipe network enclosing rigid insulation to switch on and off the active insulation dynamically. The performance of the wall's contribution to cooling load reduction under different parameters has been investigated in previous publications. Aiming to be deployed into model predictive control and other optimization methods, simplified and reliable models for the developed wall and the room accommodating it are required. They are needed to characterize the properties and thermal response of both Empower Wall and building envelope, which form an essential component for accurate indoor temperature or cooling/heating demand prediction. In this study, simplified gray-box and regression models as well as machine learning model were developed and the performance of them were compared and analyzed.

Cui, Borui↗

Implementation and Verification of Isolated Defects for GTS Lifecycle Analyses

Often, the presence of cracks in manufactured components are detrimental to their overall performance. We develop a workflow and tools in this report using CUBIT and Sierra/SM for generating and modeling crack defects to better understand their impact on such components. To this end, we provide a CUBIT library of various prototypical crack defects embedded in pipes and plates that can be readily used in a wide range of simulations, with specific application to those used in Gas Transfer Systems (GTS). We verify the accuracy of the J-integral post-processing capability in Sierra against solutions available in existing literature for the cracks and geometries of interest within the context of linear elastic fracture mechanics, and describe ongoing efforts to quantify and assess numerical errors. Through this process, we outline overall suggestions and recommendations to the user based on the proposed workflow.

97 MATHEMATICS AND COMPUTING↗

ASU’s DAC polymer-enhanced cyanobacterial bioproductivity (AUDACity)

ASU’s DAC polymer-enhanced cyanobacterial bioproductivity (AUDACity) project aims to demonstrate a novel, scalable method for removing carbon dioxide (CO 2 ) directly from ambient air and delivering it to cyanobacterial cultures to produce commodity biofuel, mid-value protein for supplements, and high value phycocyanin (PC), a natural blue colorant (Figure A). This approach uses low-cost, reusable anion exchange polymers embedded in modular mesh packets, which capture CO 2 during drying cycles when exposed to ambient air, and release concentrated CO 2 into aqueous cultivation systems. The project addresses a critical challenge in energy research needed for developing sustainable, economically viable methods of Direct Air Capture (DAC) that can be integrated with bio-based systems for fuel and chemical production. AUDACity contributes to scientific understanding by integrating materials chemistry, cyanobacterial biology, and system engineering to create a distributed CO 2 delivery platform. Key insights have emerged around the design of biocompatible sorbents, optimization of CO 2 capture-release cycles, and durability of packet-based delivery systems under outdoor conditions. Notably, the team has synthesized and tested a range of polymer sorbents, identified mechanisms of material degradation and fouling, and advanced both lab- and pilot-scale cultivation systems to evaluate performance. From a technical and economic standpoint, AUDACity shows promise for achieving cost-effective CO 2 capture and delivery into aqueous media and biofuel production. Preliminary techno-economic analysis (TEA) indicates that the DAC system based on current performance can reach $\$$680/tonne CO 2 delivered into aqueous solution; with reasonable improvements to sorbent lifetime, sorbent capacity, reducing water uptake the approach could reach $\$$66/tonne by avoiding the need for energy-intensive sorbent regeneration and CO 2 compression, making it more feasible for decentralized deployment. With these costs for CO 2 and by extracting and selling high-value PC ($\$$50/kg) and mid-value protein supplement ($\$$6/kg), the remaining biomass can be hydrothermally treated into biofuel for $\$$2.50/gallon, and would support a small first-of-a-kind biorefinery capable of producing 500 barrels per day of biofuel. The project offers meaningful public benefits by advancing carbon removal technologies that are low-energy, modular, and adaptable to non-arable land and brackish water use. It aligns with national goals to develop advanced biotechnology and supports future pathways for bio-based fuels and products. By enabling direct coupling of CO 2 transfer into aqueous medium and biological carbon utilization, AUDACity lays the groundwork for effective algae cultivation without wasteful CO 2 delivery and is a promising and innovative solution for low-carbon fuel and bioproduct generation contributing to a vigorous bioeconomy.

09 BIOMASS FUELS↗

Network design for quantifying urban CO<sub>2</sub> emissions: assessing trade-offs between precision and network density

The majority of anthropogenic CO 2 emissions are attributable to urban areas. While the emissions from urban electricity generation often occur in locations remote from consumption, many of the other emissions occur within the city limits. Evaluating the effectiveness of strategies for controlling these emissions depends on our ability to observe urban CO 2 emissions and attribute them to specific activities. Cost-effective strategies for doing so have yet to be described. Here we characterize the ability of a prototype measurement network, modeled after the Berkeley Atmospheric CO 2 Observation Network (BEACO 2 N) in California's Bay Area, in combination with an inverse model based on the coupled Weather Research and Forecasting/Stochastic Time-Inverted Lagrangian Transport (WRF-STILT) to improve our understanding of urban emissions. The pseudo-measurement network includes 34 sites at roughly 2 km spacing covering an area of roughly 400 km 2 . The model uses an hourly 1 × 1 km 2 emission inventory and 1 × 1 km 2 meteorological calculations. We perform an ensemble of Bayesian atmospheric inversions to sample the combined effects of uncertainties of the pseudo-measurements and the model. We vary the estimates of the combined uncertainty of the pseudo-observations and model over a range of 20 to 0.005 ppm and vary the number of sites from 1 to 34. We use these inversions to develop statistical models that estimate the efficacy of the combined model–observing system in reducing uncertainty in CO 2 emissions. We examine uncertainty in estimated CO 2 fluxes on the urban scale, as well as for sources embedded within the city such as a line source (e.g., a highway) or a point source (e.g., emissions from the stacks of small industrial facilities). Using our inversion framework, we find that a dense network with moderate precision is the preferred setup for estimating area, line, and point sources from a combined uncertainty and cost perspective. The dense network considered here (modeled after the BEACO 2 N network with an assumed mismatch error of 1 ppm at an hourly temporal resolution) could estimate weekly CO 2 emissions from an urban region with less than 5 % error, given our characterization of the combined observation and model uncertainty.

54 ENVIRONMENTAL SCIENCES↗

The Embedded Self-Shielding Method

The embedded self-shielding method (ESSM) is described for computing resonance-shielded cross sections used in multigroup neutron transport calculations with the SCALE code system. The ESSM - embeds the self-shielding computation within the transport solution. The transport solution provides information for treating heterogeneous self-shielding effects, and the resulting shielded cross sections are fed back to the transport calculation. Iterations are done to obtain self-consistency. This allows self-shielded cross sections to be generated directly in the transport geometry without requiring external computation of Dancoff factors. The ESSM theory and example calculations are presented.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

Fuel cell system with interconnect

The present invention includes a fuel cell system having a plurality of adjacent electrochemical cells formed of an anode layer, a cathode layer spaced apart from the anode layer, and an electrolyte layer disposed between the anode layer and the cathode layer. The fuel cell system also includes at least one interconnect, the interconnect being structured to conduct free electrons between adjacent electrochemical cells. Each interconnect includes a primary conductor embedded within the electrolyte layer and structured to conduct the free electrons.

25 ENERGY STORAGE↗