Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Diffraction systems”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,333 records · Page 74
All sourcesNASA NTRSDOE OSTI
NASA NTRS2017

Optimal Transport Based Control of Granular Imaging System in Space

"Orbiting Rainbows” is a paradigm for creating a space-based observatory (telescope) from confined and aligned granular media. The overall objective is to construct a very large and lightweight aperture in space using a cloud of micron-sized particles held in position and aligned by the application of external electromagnetic fields, thus alleviating the extreme expense of deploying and stabilizing large monolithic telescopes by reducing the mass of the primary aperture. Adaptive optics techniques for wavefront stabilization and computational imaging techniques are then used to remove the optical noise from the scattering reflections of the granular medium, and finally producing clean images within the diffraction limit. In this paper, we address one of the key challenges of this new paradigm, namely controlling the position and orientation of the granules or particles so that the cloud of particles achieves the desired shape of an ultra-lightweight telescope and points into the right orientation. A further complication arises due to the fact that the particles do not have any onboard actuators. A number of external electric-field-based actuators are used to control all the particles simultaneously. Moreover, the number of actuators are orders-of-magnitude smaller than the number of particles, making this system largely under-actuated. Since the cloud of particles in any plausible configuration can be modeled as a probability distribution over the workspace, we formulate this control challenge as an optimal transport problem and then show that our optimal transport based control law drives the cloud of particles from any initial distribution to the desired position distribution (optical surface) and angular distribution (polarization state). Simulation results demonstrate the effectiveness of our approach.

Bandyopadhyay, Saptarshi↗
DOE OSTI2021

Thermodynamic properties of the Nd-Bi system via emf measurements, $\mathrm{DFT}$ calculations, machine learning, and $\mathrm{CALPHAD}$ modeling

Thermodynamic properties of the Nd-Bi system were investigated using a combination of experimental measurements, first-principles calculations based on density functional theory (DFT), data mining and machine learning (DM + ML) predictions, and calculation of phase diagrams (CALPHAD) modeling. The electromotive force (emf) of Nd-Bi alloys in molten LiCl-KCl-NdCl 3 at 773–973 K was measured via coulometric titration of Nd into Bi for the determination of thermochemical properties such as activity coefficients and solubilities of Nd in Bi. A new peritectic reaction of [liquid + NdBi 2 = Nd 3 Bi 7 ] at 774 K was confirmed using differential scanning calorimetry, structural (X-ray diffraction), and microstructural (scanning electron microscopy) analyses. The unknown crystal structure of NdBi2 was suggested to be a mixture of the anti-La 2 Sb configuration and the La 2 Te-type configuration based on ML predictions for over 26,000 data-mined AB 2 -type configurations together with DFT-based verifications. Using the newly acquired experimental data and DFT-based calculations, the thermodynamic description of the Nd-Bi system was remodeled, and a more complete Nd-Bi phase diagram was calculated, including the Nd 3 Bi 7 compound, invariant transition reactions, and liquidus temperatures.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Chemical Bonding Governs Complex Magnetism in MnPt 5 P

Subtle changes in chemical bonds may result in dramatic revolutions in magnetic properties in solid-state materials. MnPt 5 P, a derivative of the rare-earth-free ferromagnetic MnPt 5 As, was discovered and is presented in this work. Specifically, MnPt 5 P was synthesized, and its crystal structure and chemical composition were characterized by X-ray diffraction as well as energy-dispersive X-ray spectroscopy. Accordingly, MnPt 5 P crystallizes in the layered tetragonal structure with the space group P4/mmm (No. 123), in which the face-shared Mn@Pt 12 polyhedral layers are separated by P layers. In contrast to the ferromagnetism observed in MnPt 5 As, the magnetic properties measurements on MnPt 5 P show antiferromagnetic ordering occurs at ~188 K with a strong magnetic anisotropy in and out of the ab-plane. Moreover, a spin-flop transition appears when a high magnetic field is applied. An A-type antiferromagnetic structure was obtained from the analysis of powder neutron diffraction (PND) patterns collected at 150 and 9 K. Calculated electronic structures imply that hybridization of Mn-3d and Pt-5d orbitals is critical for both the structural stability and observed magnetic properties. Semiempirical molecular orbitals calculations on both MnPt 5 P and MnPt 5 As indicate that the lack of 4p character on the P atoms at the highest occupied molecular orbital (HOMO) in MnPt 5 P may cause the different magnetic behavior in MnPt 5 P compared to MnPt 5 As. The discovery of MnPt 5 P, along with our previously reported MnPt5As, parametrizes the end points of a tunable system to study the chemical bonding which tunes the magnetic ordering from ferromagnetism to antiferromagnetism with the strong spin–orbit coupling (SOC) effect.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Pressure-induced phase transition in barium hydride studied with neutron scattering

Barium hydride can undergo a structural phase transition from an orthorhombic phase to a hexagonal phase induced by high temperature or high pressure. This transition causes an immediate increase in the hydrogen diffusion rates by over an order of magnitude, and therefore, understanding the origin and details of such transition is of great interest not only for fundamental reasons but also for improving materials for future applications. In this work, the pressure evolution of the crystal structure was characterized using neutron powder diffraction up to a maximum pressure of 11.3 GPa. The pressure dependence of the unit cell volumes, lattice parameters, atomic sites, and compressibilities were determined for both phases. A structural phase transition occurred over a wide pressure range of P = 1.3 GPa–4.9 GPa. The transition to the higher density hexagonal phase reduced the volume per formula unit of BaD 2 by 13.6%, hence increasing the volumetric storage density. In addition, we investigated the hydrogen diffusion process using high pressure quasi-elastic neutron scattering up to 7.1 GPa. Our results show that the hydrogen mobility increases with pressure in the hexagonal phase. This work sheds light on the structural and dynamical aspects of barium hydride caused by the application of high pressure. Finally, the results may aid in the development of advanced metal hydride systems with increased hydrogen dynamics.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Magnetic order and physical properties of the kagome metal UNb 6 ⁢Sn 6

The 𝑅⁢𝑀 6 ⁢𝑋 6 family of materials (𝑅 = rare-earth, 𝑀 = transition metal, 𝑋 = Ga, Si, Ge, Sn) produces an array of emergent phenomena, such as charge density waves, intrinsic Hall effects, and complex magnetic order, due to its kagome net of transition metal atoms, its local-moment magnetic anisotropies, and its extensive chemical tunability. Here, in this study, we report UNb 6⁢ Sn 6 , a new “166” material containing both an actinide and a 4⁢𝑑 transition metal, along with its nonmagnetic analog ThNb6⁢Sn6, to investigate the properties of a 5⁢𝑓−4⁢𝑑 electron 166 system. UNb 6 ⁢Sn 6 crystallizes in the hexagonal 𝑃⁢6/𝑚⁢𝑚⁢𝑚 space group with a small degree of disorder due to shifts in the size of the CoSn-like cages along the 𝑐 axis. Upon cooling at zero magnetic field, the material undergoes two magnetic phase transitions at 𝑇 2 = 46K and 𝑇 N = 43K. The low-temperature, zero-field phase is an antiferromagnet with ordered uranium moments and a k = (0,0,1/2) propagation vector determined by neutron diffraction. Remarkably, with a magnetic field applied along the 𝑐 axis, five additional magnetic transitions occur, evidenced by magnetization and resistivity data, before the moment saturates at 2.62 𝜇 B /U at 2 K and ≥ 13.6T. In two magnetic phase regions, the Hall resistivity of UNb 6⁢ Sn 6 significantly deviates from the magnetization, suggesting that the phases have a large Berry curvature or a change in the Fermi surface. The unknown magnetic ordering of the field-dependent phases of UNb 6⁢ Sn 6 demonstrates the complexity of the 5⁢𝑓−4⁢𝑑 166 system and encourages further study of its properties.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Thermodynamic re-modelling of the Cu–Nb–Sn system: Integrating the nausite phase

Currently available Cu–Nb–Sn phase diagrams lack the recently discovered nausite phase (Cu,Nb)Sn 2 , which is an important intermediate in the course of thermal processing of superconducting Nb 3 Sn wires. Processing decisively determines the resulting microstructure of Nb 3 Sn and, thus, its superconducting properties. Lack of suitable and complete phase diagrams, however, obstructs rational design of such thermal processing procedures. To close this gap and to obtain valid knowledge of homogeneity and stability range of nausite, various Cu–Nb–Sn samples, which are heat-treated between 300 °C and 500 °C, are investigated. By means of energy-dispersive X-ray spectroscopy (EDX), a temperature-dependent homogeneity range of nausite is observed, which covers average mole fractions of Cu between 0.09 and 0.15. This is correlated with a change in the mean atomic volume and can be seen in the lattice parameters determined by X-ray diffraction (XRD). Additionally performed first-principles calculations on different CuSn 2 and NbSn 2 model structures confirm this trend. Furthermore, the peritectic decomposition of nausite to NbSn 2 and liquid at 586 °C is determined by means of in situ XRD and differential scanning calorimetry (DSC). By using the CALPHAD (CALculation of PHase Diagrams) approach, all these findings are used to extend a previous thermodynamic description of the Cu–Nb–Sn system by including the nausite as an additional phase. Finally, with this noteworthy integration, the updated modelling of the Cu–Nb–Sn system can be used for optimizing the multistage heat-treatment steps during processing superconducting Nb 3 Sn wires.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Time-Resolved Structural Measurement of Thermal Resistance across a Buried Semiconductor Heterostructure Interface

The precise control and understanding of heat flow in heterostructures is pivotal for advancements in thermoelectric energy conversion, thermal barrier coatings, and efficient heat management in electronic and optoelectronic devices. In this study, we employ high-angular-resolution time-resolved X-ray diffraction to structurally measure thermal resistance in a laser-excited AlGaAs/GaAs semiconductor heterostructure. Our methodology offers femtometer-scale spatial sensitivity and nanosecond time resolution, enabling us to directly observe heat transport across a buried interface. We corroborate established Thermal Boundary Resistance (TBR) values for AlGaAs/GaAs heterostructures and demonstrate that TBR arises from material property discrepancies on either side of a nearly flawless atomic interface. This work not only sheds light on the fundamental mechanisms governing heat flow across buried interfaces but also presents a robust experimental framework that can be extended to other heterostructure systems, paving the way for optimized thermal management in next-generation devices.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Fabrication of hybrid tin oxide‐cellulose nanocomposite as the flexible and thin supercapacitor

Abstract Microfibrillated cellulose (MFC) with reinforcing effects is a useful building block in the fabrication of flexible and thin supercapacitors. Herein, a hybrid tin oxide‐cellulose nanocomposite was hydrothermally produced and coated on MFC thin films to form a supercapacitor. The hybrid tin oxide‐cellulose thin films were structurally analyzed using scanning electrode microscopy, Fourier transform infrared spectroscopy and x‐ray diffraction. The cellulose thin film with the highest loading of hybrid tin oxide‐cellulose nanocomposite exhibited a specific capacitance of 225.88 F g −1 at 100 mV s −1 and 486.38 F g −1 at 20 mV s −1 in the three‐electrode electrochemical system. In addition, it revealed good cyclic stability up to 40 cycles run continuously with 95% cyclic retention. The high specific capacitance and superior cyclic stability could be related to the enhanced charge mobility and ion diffusion between the solid and electrolyte interface. The cellulose thin film coated with flower‐like hybrid nanocomposite showed great potential in energy storage.

Letchumanan, Iswary↗
DOE OSTI2020

Modification of magnetic ground state in Tb 2 Ni 0.90 Si 2.94 by thermal annealing

In this work, we have investigated the thermal annealing effect on the physical properties of an AlB 2 -type ternary intermetallic compound, Tb 2 Ni 0.90 Si 2.94 , that undergoes spin freezing behaviour coexisting with spatially limited antiferromagnetic phase below 9.9 K in as-cast form. Thermal annealing effect is found to result in considerable changes in the magnetic ground state properties of the system. Though only one magnetic transition around 9.9 K is observed for as-cast compound, the annealed sample exhibits two distinct magnetic transitions; one around T N ~ 13.5 K and another around T f ~ 4 K. The magnetization measurements and zero field neutron diffraction study reveal that the high temperature transition is antiferromagnetic type, though of limited correlation length, while the low temperature transition corresponds to spin freezing behaviour. The ac susceptibility and heat capacity studies also confirm the existence of frustrated cluster glass state at lower temperature than the antiferromagnetic ordering temperature. Additionally, ac susceptibility data exhibits signature of an additional peak in the even lower temperature region (at 2.2 K for zero frequency) that tends to shift in opposite direction with frequency in contrast to that observed for conventional glassy transitions. The change in intrinsic local structural disorder of Ni and Si ions associated with annealing has been argued to be responsible for the different magnetic behaviour in as-cast and annealed samples.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Resolving atomistic structure and oxygen evolution activity in nickel antimonates

The oxygen evolution reaction (OER) requires electrodes that are not only catalytically active, but also stable under harsh electrochemical environments to enable efficient, durable technologies. Our recent report of a stable amorphous Ni 0.5 Sb 0.5 O z OER photoanode established Ni–Sb–O as an important system for computational understanding of both the structural and catalytic behavior of these complex oxides. In the present work we show that Ni x Sb 1-x O z with x > 0.33 crystallizes into a previously unknown phase. Guided by experimental X-ray diffraction, here, we use density functional theory calculations to perform a prototype phase search to identify a broad family of stable and metastable mixed rutile and hexagonal-like phases for x = 0.33, 0.50, and 0.66 compositions. For the identified phases, we predict favorable oxygen vacancy formation energies for Ni-rich compositions under the reducing synthesis conditions which match measured Ni K-edge X-ray absorption spectra. The calculated overpotential for the most active site decreases with increasing Ni content, from 0.91 V (x = 0.33) to 0.49 V (x = 0.66), which captures the experimentally observed trend. We find the active site changes from the Ni–O–Sb bridge to a Ni–O–Ni bridge at increasing Ni concentrations, rather than the commonly studied singly under-coordinated sites. Finally, detailed Pourbaix analysis of the identified phases show excellent electrochemical stability, consistent with experimentally measured low metal ion concentrations in the electrolyte of photoelectrochemical cells. Collectively, our consideration of an ensemble of structures enables identification of the most catalytically prolific structural motifs, aiding the understanding of crystalline and amorphous catalysts and elucidating the co-optimization of activity and durability in nickel antimonates.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Fluctuating Ru trimer precursor to a two-stage electronic transition in RuP

Superconductivity in binary ruthenium pnictides occurs proximal to and upon suppression of a non-magnetic ground state, preceded by a pseudogap phase associated with Fermi surface instability, and its critical temperature, T c , is maximized around the pseudogap quantum critical point. By analogy with isoelectronic iron based counterparts, antiferromagnetic fluctuations became ''usual suspects" as putative mediators of superconducting pairing. Here we report on a high temperature local symmetry breaking in RuP, nonsuperconducting parent of the maximum- T c branch of these novel superconductors, revealed by combined nanostructure-sensitive powder and single crystal X-ray total scattering analyses. Large local distortions of Ru chains associated with orbital-charge trimerization, further assembled into hexamers, exist above the two-stage electronic transition in RuP. In the pseudogap regime the precursors order with distortions retaining their strength, whereas they acquire spin-singlet characteristics which dramatically enhances the distortion as the nonmagnetic ground state establishes. The precursors enable the nonmagnetic ground state and presumed complex oligomerization, and the relevance of pseudogap fluctuations for superconductivity emerges as a distinct prospect. As a transition metal system in which partial d-manifold filling combined with high crystal symmetry promotes electronic instabilities, this represents a further example of local electronic precursors underpinning the macroscopic collective behavior of quantum materials.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2022

Exotic physical properties in metallic perovskite LaRuO 3 : Strong evidence for Hund metal

The Hund's coupling rule is of fundamental importance in atomic physics. It also plays a key role in the determination of physical properties in strongly correlated electron systems where the Fermi energy lies in multiple bands. Here we report a thorough investigation of a rarely studied 4d perovskite oxide LaRuO 3 by a suite of measurements including transport, magnetization, specific heat, thermoelectric power, thermal conductivity, and neutron and x-ray diffraction. Our results are consistent with theoretical predictions, which makes LaRuO 3 an exemplary Hund metal.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2025

Multiscale structural analysis of polymorphic phase boundaries in doped antiferroelectric sodium niobate

In the current work, we have performed multiscale structural analysis of a Pb-free sodium niobate-based smart system, i.e., 0.9⁢NaNbO 3 –0.1⁢Ba 0.9 ⁢Ca 0.1 ⁢TiO 3 (NN-10BCT) reported earlier for its high ferroelectric response. We have investigated the temperature-dependent evolution of crystal structure at long, medium, and short ranges using synchrotron x-ray diffraction (SXRD), Raman scattering, and pair distribution function(PDF) techniques in conjunction with dielectric studies. Temperature-dependent synchrotron x-ray diffraction data combined with dielectric analysis suggest two unique polymorphic phase boundaries (PPB) with two coexisting ferroelectric phases stable in the wide temperature ranges. These PPBs are stable in different regions viz. (i) cryogenic temperatures with coexisting R3c and Pmc⁢2 1 phases (ii) vicinity of room temperatures with coexisting Pmc⁢2 1 and Amm2 phases. In contrast to the conclusions drawn from SXRD, PDF reveals structures having lower symmetry (with coexisting Cc+ Pmc2 1 phases at 1.7 ≤r≤ 20 Å) at short ranges for these PPBs. In conclusion, the presence of different long- and short-range symmetries (accommodating tilt-oriented ferroelectric phases) in the unique polymorphic phase boundaries makes them thermally stable and advantageous for technological applications.

36 MATERIALS SCIENCE↗
NASA NTRS1977

Control of optical performance on the Space Telescope

A large astronomical telescope, termed the Space Telescope, is expected to be placed in orbit in the early 1980's. It will be operated as an international observatory that will enable astronomers to detect electromagnetic radiation over a much broader spectrum than is possible from ground observatories. The image quality (not degraded by atmospheric effects) will be limited only by the quality of the optics and by aperture diffraction. This opportunity to approach diffraction-limited imagery on an astronomical telescope of this size (2.4-m aperture) sets unusually stringent tolerances on the optical quality. The budgeting and control of these qualities throughout the design, fabrication, assembly, and operation of the Space Telescope is described. A feedback control system which will maintain the telescope at peak performance in the orbital environment is examined.

Jones, C. O.↗
NASA NTRS1983

Surface acoustic wave/silicon monolithic sensor/processor

A new technique for sputter deposition of piezoelectric zinc oxide (ZnO) is described. An argon-ion milling system was converted to sputter zinc oxide films in an oxygen atmosphere using a pure zinc oxide target. Piezoelectric films were grown on silicon dioxide and silicon dioxide overlayed with gold. The sputtered films were evaluated using surface acoustic wave measurements, X-ray diffraction, scanning electron microscopy, Auger electron spectroscopy, and resistivity measurements. The effect of the sputtering conditions on the film quality and the result of post-deposition annealing are discussed. The application of these films to the generation of surface acoustic waves is also discussed.

Kowel, S. T.↗
NASA NTRS1987

Stellar occultation probes of the Uranian rings at 0.1 and 2.2 microns - A comparison of Voyager UVS and earth-based results

A comparison between Voyager 2 UV spectrometer data for stellar occultations of the Uranian ring system obtained at 0.11 microns and 2.2-micron earth-based occultation data reveals the anticipated factor-of-two reduction in observed optical depths relative to those observed from earth. This is due to Voyager's proximity to the rings, which allows light diffracted out of the direct beam by ring particles to be replaced by light diffracted into the direct beam light from other particles, and further permits the placing of firm lower limits on typical particle sizes of 0.3 and 1 cm for the epsilon and delta rings, respectively. As a function of true anomaly, the epsilon ring profile is noted to remain very similar in shape and essentially constant in equivalent depth, even very near periapse.

Holberg, J. B.↗
NASA NTRS2016

Arcus: The X-Ray Grating Spectrometer Explorer

Arcus will be proposed to the NASA Explorer program as a free-flying satellite mission that will enable high-resolution soft X-ray spectroscopy (8-50 Angstroms) with unprecedented sensitivity-effective areas of greater than 500 sq cm and spectral resolution greater than 2500. The Arcus key science goals are (1) to determine how baryons cycle in and out of galaxies by measuring the effects of structure formation imprinted upon the hot gas that is predicted to lie in extended halos around galaxies, groups, and clusters, (2) to determine how black holes influence their surroundings by tracing the propagation of out-flowing mass, energy and momentum from the vicinity of the black hole out to large scales and (3) to understand how accretion forms and evolves stars and circumstellar disks by observing hot infalling and outflowing gas in these systems. Arcus relies upon grazing incidence silicon pore X-ray optics with the same 12m focal length (achieved using an extendable optical bench) that will be used for the ESA Athena mission. The focused X-rays from these optics will then be diffracted by high-efficiency off-plane reflection gratings that have already been demonstrated on sub-orbital rocked flights, imaging the results with flight-proven CCD detectors and electronics. The power and telemetry requirements on the spacecraft are modest. The majority of mission operations will not be complex, as most observations will be long (~100 ksec), uninterrupted, and pre-planned, although there will be limited capabilities to observe targets of opportunity, such as tidal disruption events or supernovae with a 3-5 day turnaround. After the end of prime science, we plan to allow guest observations to maximize the science return of Arcus to the community.

Instrumentation↗
NASA NTRSDate not supplied

Mineralogical, Elemental, and Tomographic Reconnaissance Investigation for CLPS (Metric)

Geological solids are characterized by their mineral structure, elemental composition, and morphology. The Mineralogical, Elemental, and Tomographic Reconnaissance Investigation for CLPS (METRIC) is an instrument payload that will quantify all three. METRIC comprises a suite of instruments in a lander to perform X-ray diffraction (XRD) for mineral structure, X-ray fluorescence (XRF) for elemental composition, and X-ray Micro Computed Tomography (XCT) for 3D internal micromorphology. The instruments are accompanied by an Infrared Spectrometer (IRS) provide geologic context. A Honeybee Robotics pneumatic sampling and transfer system [e.g., 1] will be positioned under the lander to deliver sieved regolith to the X-ray instruments for analysis. This payload is envisioned for deployment to the lunar surface on a Commercial Lunar Payload Services (CLPS) lander but could be carried on a lander or rover to any solid surface in the solar system.

E B Rampe↗