Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Data mining”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,333 records · Page 74
All sourcesNASA NTRSDOE OSTI
DOE OSTI2025

Degradation and Accelerated Recovery of Surface Passivation in n+, p+, and Intrinsic Poly-Si/SiOx Passivating Contacts for Silicon Solar Cells

We report on the degradation and recovery of surface passivation of fired poly-Si/SiOx passivating contacts with hydrogen containing Al2O3 during annealing in the dark and under illumination. Upon firing to a peak temperature of 670 degrees C, the iVoc for symmetric test structures with n+, p+, and intrinsic poly-Si/SiOx contacts decreases due to a loss of surface passivation. Upon further annealing over the temperature range of 200-350 degrees C in the dark, depending on the type of doping, the surface passivation either shows further degradation followed by recovery, or direct recovery to the initial iVoc. Annealing at higher temperatures and/or higher illumination intensities accelerates the kinetics for both degradation and recovery processes. We show that the degradation and recovery processes are thermally activated and proceed identically in subsequent firing and annealing steps showing their cyclic nature. We present a series reaction model to explain the kinetics of degradation and recovery processes for n+ and intrinsic poly-Si/SiOx contacts. By fitting the model's rate expressions to the data, the determined effective activation energy barriers for degradation and recovery for n+ poly-Si/SiOx contacts in the dark are 1.24 and 1.51 eV, which are lowered under 7.5 Suns illumination to 0.76 and 1.15 eV, respectively.

14 SOLAR ENERGY↗
DOE OSTI2024

A shift between mineral and nonmineral sources of iron and sulfur causes proteome-wide changes in Methanosarcina barkeri

ABSTRACT Iron (Fe) and sulfur (S) are required elements for life, and changes in their availability can limit the ecological distribution and function of microorganisms. In anoxic environments, soluble Fe typically exists as ferrous iron [Fe(II)] and S as sulfide (HS − ). These species exhibit a strong affinity that ultimately drives the formation of sedimentary pyrite (FeS 2 ). Recently, paradigm-shifting studies indicate that Fe and S in FeS 2 can be made bioavailable by methanogens through a reductive dissolution process. However, the impact of the utilization of FeS 2 , as opposed to canonical Fe and S sources, on the phenotype of cells is not fully understood. Here, shotgun proteomics was utilized to measure changes in the phenotype of Methanosarcina barkeri MS grown with FeS 2 , Fe(II)/HS − , or Fe(II)/cysteine. Shotgun proteomics tracked 1,019 proteins overall, with 307 observed to change between growth conditions. Functional characterization and pathway analyses revealed these changes to be systemic and largely tangential to Fe/S metabolism. As a final step, the proteomics data were viewed with respect to previously collected transcriptomics data to deepen the analysis. Presented here is evidence that M. barkeri adopts distinct phenotypes to exploit specific sources of Fe and S in its environment. This is supported by observed protein abundance changes across broad categories of cellular biology. DNA adjacent metabolism, central carbon metabolism methanogenesis, metal trafficking, quorum sensing, and porphyrin biosynthesis pathways are all features in the phenotypic differentiation. Differences in trace metal availability attributed to complexation with HS − , either as a component of the growth medium [Fe(II)/HS − ] or generated through reduction of FeS 2 , were likely a major factor underpinning these phenotypic differences. IMPORTANCE The methanogenic archaeon Methanosarcina barkeri holds great potential for industrial bio-mining and energy generation technologies. Much of the biochemistry of this microbe is poorly understood, and its characterization will provide a glimpse into biological processes that evolved close to life’s origin. The discovery of its ability to extract iron and sulfur from bulk, solid-phase minerals shifted a longstanding paradigm that these elements were inaccessible to biological systems. The full elucidation of this process has the potential to help scientists and engineers extract valuable metals from low-grade ore and mine waste generating energy in the form of methane while doing so.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2023

Mining the Penicillium expansum Genome for Virulence Genes: A Functional-Based Approach to Discover Novel Loci Mediating Blue Mold Decay of Apple Fruit

Blue mold, a postharvest disease of pome fruits, is caused by the filamentous fungus Penicillium expansum. In addition to the economic losses caused by P. expansum, food safety can be compromised, as this pathogen is mycotoxigenic. In this study, forward and reverse genetic approaches were used to identify genes involved in blue mold infection in apple fruits. For this, we generated a random T-DNA insertional mutant library. A total of 448 transformants were generated and screened for the reduced decay phenotype on apples. Of these mutants, six (T-193, T-275, T-434, T-588, T-625, and T-711) were selected for continued studies and five unique genes were identified of interest. In addition, two deletion mutants (Δt-625 and Δt-588) and a knockdown strain (t-434 KD ) were generated for three loci. Data show that the Δt-588 mutant phenocopied the T-DNA insertion mutant and had virulence penalties during apple fruit decay. We hypothesize that this locus encodes a glyoxalase due to bioinformatic predictions, thus contributing to reduced colony diameter when grown in methylglyoxal (MG). This work presents novel members of signaling networks and additional genetic factors that regulate fungal virulence in the blue mold fungus during apple fruit decay.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2024

Heart Shape to Fracture Distance: Characterizing Hydraulic Fracture Propagation before Hits

Estimating the distance from the hydraulic fracture tip to the monitor well can be useful for fracture characterization, well spacing optimization, and preventing parent-child well interference. A heart-shaped signal is referred to as the extensional precursor of a fracture hit recorded by crosswell strain measurements and can serve as a vital tool for such estimation. This study incorporates the 3D displacement discontinuity method (DDM) to understand the impact of fracture geometry and monitor well offset on the heart-shaped signal’s characteristics. Results from numerical simulation and analytical solutions reveal a strong linear correlation between the spatial extent of the heart-shaped signal and the fracture tip distance. This relationship was further developed to predict tip distance using field data from the Hydraulic Fracture Test Site 2 (HFTS2). A reasonable approximation result from field data further validates the methodology. In addition, it is worth noting that the estimation accuracy depends on the ratio between fracture dimension and tip distance. The findings of this study offer a novel approach for real-time monitoring and characterizing hydraulic fracture propagation, which can be further used for well spacing optimization in unconventional and enhanced geothermal system reservoir development, as well as caprock integrity monitoring for carbon sequestration projects.

58 GEOSCIENCES↗
DOE OSTI2025

Evaluation of Cease Fire CFP 640 for Use in Gloveboxes (Final Report)

A Los Alamos National Laboratory (LANL) task group was established to discuss and evaluate a candidate fire suppression system (FSS) for gloveboxes (GB) and dropboxes (DB, for brevity, this report will simply refer to gloveboxes). Suitability criteria include compliance, compatibility, and capability. LANL contracted with New Mexico Tech (NMT) to quantitatively evaluate the perfor mance of one of those systems including its ability to extinguish GB fires, limit over-pressurization of the GB, etc. Additionally, the results of these experiments provide data points that could be used when fire hazard evaluations (FHEs) are conducted for determining when to require a fire suppres sion system installation within a GB (as required by NFPA 801, Standard for Facilities Handling Radioactive Materials, DOE Standard 1066-2012 Fire Protection, and AGS-G010-2011 Standard of Practice for Glovebox Fire Protection).

42 ENGINEERING↗
DOE OSTI2025

The role of the droplet interface in controlling the multiphase oxidation of thiosulfate by ozone

Predicting reaction kinetics in aqueous microdroplets, including aerosols and cloud droplets, is challenging due to the probability that the underlying reaction mechanism can occur both at the surface and in the interior of the droplet. Additionally, few studies directly measure the surface activities of doubly charged anions, despite their prevalence in the atmosphere. Here, deep-UV second harmonic generation spectroscopy is used to probe surface affinities of the doubly charged anions thiosulfate, sulfate, and sulfite, key species in the thiosulfate ozonation reaction mechanism. Thiosulfate has an appreciable surface affinity with a measured Gibbs free energy of adsorption of -7.3 ± 2.5 kJ mol -1 in neutral solution, while sulfate and sulfite exhibit negligible surface propensity. The Gibbs free energy is combined with data from liquid flat jet ambient pressure X-ray photoelectron spectroscopy to constrain the concentration of thiosulfate at the surface in our model. Stochastic kinetic simulations leveraging these novel measurements show that the primary reaction between thiosulfate and ozone occurs at the interface and in the bulk, with the contribution of the interface decreasing from ~65% at pH 5 to ~45% at pH 13. Additionally, sulfate, the major product of thiosulfate ozonation and an important species in atmospheric processes, can be produced by two different pathways at pH 5, one with a contribution from the interface of >70% and the other occurring predominantly in the bulk (>98%). The observations in this work have implications for mining wastewater remediation, atmospheric chemistry, and understanding other complex reaction mechanisms in multiphase environments. Future interfacial or microdroplet/aerosol chemistry studies should carefully consider the role of both surface and bulk chemistry.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2026

Reservoir Characterization and Techno-Economic Analysis of Enhanced Geothermal and Closed-Loop Systems in the Wattenberg Field of the Denver-Julesburg Basin, Colorado

This report provides details of reservoir characterization and techno-economic analysis for enhanced geothermal systems and closed-loop geothermal systems in the Denver-Julesburg Basin Wattenberg area. The analysis contributes to the Geothermal Limitless Approach to Drilling Efficiencies (GLADE) project, a multi-institutional research initiative focused on advancing geothermal energy development by reducing drilling costs and improving the rate of penetration. The GLADE project brings together national laboratories, academic institutions, and industry partners, including the U.S. Department of Energy's Geothermal Technologies Office, Occidental Petroleum, the National Laboratory of the Rockies (NLR), Los Alamos National Laboratory, Colorado School of Mines, Louisiana State University, Texas A&M University, and several drilling technology companies. As part of this effort, NLR developed and applied slender-body theory modeling tools and the GEOPHIRES simulator to support techno-economic analysis. The slender-body theory wellbore simulator evaluated thermal performance in U-loop, Eavor-type multilateral, and enhanced geothermal system well configurations. Results indicated that an optimized single U-loop design delivers an outlet temperature of 168.8 degrees Celsius,stabilizing at a final outlet temperature of 135.3 degrees Celsius. Heat production also improved significantly, with an average thermal output of 16.9 MWth and a final thermal output of 11.0 MWth. These results provided critical baseline data for selecting optimized systems for techno-economic analysis. Building on these outputs, NLR applied the GEOPHIRES techno-economic simulator to estimate the levelized cost of electricity for both the Eavor multilateral and enhanced geothermal systems. The sensitivity analysis showed that drilling costs exert a particularly strong impact on the levelized cost of electricity of multilateral systems. Therefore, advances in drilling technology and improved drilling rates could yield significant gains in the economic performance of these systems. In this context, the GLADE project directly supports the U.S. Department of Energy's mission to reduce the cost of geothermal energy and accelerate the deployment of next-generation geothermal technologies.

15 GEOTHERMAL ENERGY↗
DOE OSTI2020

High Temperature Erosion Modeling in Particle Based CSP Systems

1. Introduction. Wear and erosion damage of materials from solid particle and surface interactions is a major issue in various industries. Although more common in mining and oil and gas production, erosion is becoming a critical issue in renewable technologies as well such as particle based concentrated solar thermal power (CSP) systems. In particle based CSP systems, solid particles are used to absorb solar energy and as thermal storage. However, these particles may cause significant amount of wear to system components while through the system at high temperatures. This damage can be costly, and therefore, requires a greater understanding of solid particle erosion in CSP systems. Throughout the years, models and tools have been developed to predict and control erosion in industries such as oil and gas production. However, these erosion models and erosion prediction tools have been mainly developed based on erosion data for much higher velocities and lower temperatures, i.e. the operating conditions for which the existing models have been built are not pertinent to those expected in CSP system. It is known that erosion depends on many factors such as material properties, erodent particle properties, and particle impact speed and angle. However, the effect of temperature on erosion is not vastly investigated. In this work, a temperature-based correlation is introduced that will be used to modify the existing erosion models to predict erosion rates at velocities and temperatures relevant to Gen3 CSP systems. The existing models are first validated against erosion experiments run at low temperatures and low velocities. Subsequently, a temperature correction term is developed that can extend the existing models to high temperatures, based on the available experimental data showing the effect of temperature on impact erosion. 2. Erosion Models. Continuing sequence of impacts from solid particles on surfaces would result in loss of material due to mechanical interaction between solid surface and particles. Erosion equations have been developed to predict erosion under different conditions and erosion mechanism, including cutting and deformation erosion. These models are mainly either mechanistic, empirical, and semi-mechanistic models, when the latter combine the theory of the erosion mechanism and particle motion with the available experimental data. One of the first empirical correlation was introduced by American Petroleum Institute (API) Recommended Practice (RP) 14E [1]. This correlation was very conservative, and several improved empirical and semi-mechanistic equations were developed in the years following. More recently, the models introduced by Erosion/Corrosion Research Center (E/CRC) at the University of Tulsa and Arabnejad. et al. [2] are frequently used in the literature and industry, as they account for many parameters affecting erosion including particle impact speed and angle, material density and hardness, and particle size and shape. However, both these models were developed based on data at relatively high velocities and also do not take into account any mechanical changes in material associated with thermal cycling at high temperatures. 3. Erosion Prediction at High Temperatures. In this work, the accuracy of Arabnejad et al. model and E/CRC model is investigated to predict impact erosion at conditions relevant to Gen3 CSP systems. Two significant deviations expected in Gen3 systems compared to operating conditions used to build these models are particle impact velocities and system temperature. As a first step, the performance of these models was validated at low velocities and temperatures. Impact erosion experiments were conducted on SS316 coupons using HSP 40/70 ceramic particles. Assuming particle rate of 1 kg/s/m, 0.0254 m of particle curtain thickness, and particle velocity of 1.5 m/s in the system, an overall erosion of 0.59 mm/year was calculated. The experimental results were subsequently compared to those from computational simulations and erosion of 0.47 mm/year was obtained using the Arabnejad et al. model. The results indicated that the models work well at low velocities and low temperature conditions. To account for temperature effect, a mathematical correlation was developed using data published by DUCOM [3] for Inconel 600 eroded by alumina particles at high velocities. The correlation was applied to both Arabnejad et. al model and the E/CRC model. The prediction results from these modified models were within 20% of this experimental data. Predictions of of erosion by the modified E/CRC model at three different temperatures are made. Similar to the calculation at low temperature, a typical CSP system with 1 kg/s/m of particle flow rate per unit length of the particle curtain and a curtain thickness of 0.0254 m is assumed. The annual thickness loss calculations were run for different particle impact velocities, assuming a uniform particle impact area equal to the cross-sectional area of the curtain (particle-particle interactions and dispersion of particles are not considered in obtaining the results). It is observed that erosion increases exponentially as temperature increases. Furthermore, it is also noted that, erosion changes non-linearly with impact velocity. Currently, experiments are also being conducted to measure erosion of SS316 at 800 ºC with HSP 40/70 particles at low impact velocities. We expect to use the results from high temperature testing to further improve the temperature correlation function. Similar models are also being developed for abrasion erosion resulting from particle sliding along the surfaces as well as attrition from particle to particle and particle to surface interactions. References. [1] Institute, A. P. (1991). API Recommended Practice for Design and Installation of Offshore Production Platform Piping System, API RP 14E. [2] Arabnejad, H., Mansouri, A., Shirazi, S. A., and McLaury, B. S. (2015a). Development of mechanistic erosion equation for solid particles. Wear, 332–333, 1044–1050. http://doi.org/10.1016/j.wear.2015.01.031. [3] https://ducom.com/high-temperature-erosion-evaluating-sample-wear/

14 SOLAR ENERGY↗
DOE OSTI2023

Round-Robin Interlaboratory Study on Rare-Earth Elements in U.S.-Based Geologic Materials

In a study funded by the U.S. Department of Energy (DOE) National Energy Technology Laboratory (NETL), the University of North Dakota (UND) Energy and Environmental Research Center (EERC) performed a first-of-its-kind round-robin interlaboratory study (RRIS) to determine lab-to-lab and method-to-method variability in analyzing the rare earth element (REE) content of domestic resources. Analyses of REEs on eleven different materials were accomplished by the laboratories using four different procedures: ASTM D6357 (Procedure A), ASTM D4503 (Procedure B), an alternate in-house procedure for digestion and REE analysis (Procedure C), and neutron activation analysis (NAA). The results of the RRIS suggest that NAA is the most accurate and reliable method for many of the REEs in these types of materials; however, the method is limited in that it is able to determining only ten of the sixteen REEs. Five of the seven labs reporting data for Procedure A and three of the five labs reporting for Procedure B showed excellent performance in terms of repeatability, reproducibility, agreement with NAA, and SRM recoveries based on AOAC International guidelines on method performance. This indicates that when strictly followed these methods are suitable for REE determination in most materials, although are subject to the overall capabilities and experience of individual laboratories.

58 GEOSCIENCES↗
DOE OSTI2022

WaterTAP3 Model Input Data for NAWI's Eight Source Water Baseline Analyses

This folder contains the input data for the WaterTAP3 model that was used for the eight NAWI (National Alliance for Water Innovation) source water baselines studies published in the Environmental Science and Technology special issue: Technology Baselines and Innovation Priorities for Water Treatment and Supply. There are also eight other separate DAMS submissions, one per source water, that include the model results for the published studies. In this data submission, all model inputs across the eight baselines are included. The data structure and content are described in a README.txt file. For more details on how to use the data in WaterTAP3 please refer to the model documentation and GitHub site found at "WaterTAP3 Github" linked in the submission resources.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗
DOE OSTI2024

Energy Transitions: Local Water Concerns and Climate Impacts

This report summarizes important nuances in local water concerns and potential climate impacts that could influence the roll-out of technologies associated with energy transitions. Current investments in clean energy technologies are very high, which is driving a lot of investments in related manufacturing (i.e., hydrogen, solar, wind, and batteries) and mining (e.g., lithium, copper, and graphite) around the world. To understand how water and climate dynamics could be influencing these activities, we conducted a phased literature review for three countries: China, Germany, and France. China was selected due to its global dominance in manufacturing of solar panels, batteries, and electrolyzers as well as production of rare earth elements while Germany and France were selected due to their emerging leadership in energy transitions-related manufacturing within the European Union. For each of these three nations, we identified areas where manufacturing is occurring within the country and then evaluated relevant water resources and climate impacts. Multiple sources were consulted for this review, including BloombergNEF, international reports, industry sources, peer-reviewed literature, climate data, and media coverage.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗
DOE OSTI2024

Measurement of the neutrino-oxygen neutral-current quasielastic cross section using atmospheric neutrinos in the SK-Gd experiment

We report the first measurement of the atmospheric neutrino-oxygen neutral-current quasielastic (NCQE) cross section in the gadolinium-loaded Super-Kamiokande (SK) water Cherenkov detector. In June 2020, SK began a new experimental phase, named SK-Gd, by loading 0.011% by mass of gadolinium into the ultrapure water of the SK detector. The introduction of gadolinium to ultrapure water has the effect of improving the neutron-tagging efficiency. Using a 552.2 day dataset from August 2020 to June 2022, we measure the NCQE cross section to be 0.74 ± 0.22 ( stat ) − 0.15 + 0.85 ( syst ) × 10 − 38 cm 2 / oxygen in the energy range from 160 MeV to 10 GeV, which is consistent with the atmospheric neutrino-flux-averaged theoretical NCQE cross section and the measurement in the SK pure-water phase within the uncertainties. Furthermore, we compare the models of the nucleon-nucleus interactions in water and find that the binary cascade model and the Liège intranuclear cascade model provide a somewhat better fit to the observed data than the Bertini cascade model. Since the atmospheric neutrino-oxygen NCQE reactions are one of the main backgrounds in the search for diffuse supernova neutrino background (DSNB), these new results will contribute to future studies—and the potential discovery—of the DSNB in SK. Published by the American Physical Society 2024

Sakai, S. (ORCID:0000000221900062)↗
DOE OSTI2025

Spectrophotometric determination of the stability of La hydroxyl complexes at near neutral to alkaline pH from 25 to 75 °C

The hydrolysis of rare earth elements (REE) potentially controls their mobility during fluid-rock interaction in a broad range of pH and temperature conditions. However, there is still a lack of thermodynamic data for modeling accurately the stability of REE hydroxyl complexes in hydrothermal aqueous fluids. Here, in this study, UV–Vis spectrophotometric experiments were conducted from 25 to 75 °C in near-neutral to alkaline NaOH-bearing aqueous solutions with varying lanthanum (La) concentrations (0 to ∼0.23 mmol/kg). The color indicator m-cresol purple was used to determine in situ pH and derive the average OH− ligand number ($\overrightarrow{n}$) and formation constants for the La hydroxyl complexes (LaOH 2+ , La(OH) 2 + , and La(OH) 3 0 ). From 25 to 50 °C, $\overrightarrow{n}$ ranges between ∼1 and 2 at pH from 7.0 to 9.3. At 75 °C, $\overrightarrow{n}$ ranges between ∼1.5 and 3 at pH from 6.3 to 8.8. These results suggest the predominance of LaOH 2+ and La(OH) 2 + complexes from 25 to 50 °C, and an increased predominance of La(OH) 3 0 at 75 °C. The cumulative formation constants (β n °, n = 1 to 3) are derived for the reaction La 3+ + nOH − = La(OH) n 3-n , and fitted between 25 and 250 °C by combining the UV–Vis and literature solubility data. The resulting logβ n ° are expressed as function of temperature (T in Kelvin): logβ 1 ° = −1.786 + 0.0133 T + 1.049·10 3 /T; logβ 2 ° = −5.797 + 0.0267 T + 2.713·10 3 /T; logβ 3 ° = 6.435 + 0.0223 T + 512.7/T. A comparison between these new fits and existing extrapolations using the Helgeson-Kirkham-Flowers equation of state indicates significant differences in the predicted hydrolysis of La. The latter extrapolations should therefore be updated for the hydrolysis of REE.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Characterization of Intrinsic Fiber Optic Temperature Sensors by In-core and Furnace Testing

Increased research and development in nuclear technology has raised the demand for novel sensors and instrumentation to meet data objectives, and survive in different conditions and environments, beyond conventional light water reactor (LWR) environments. Expediting the deployment of advanced nuclear technologies by developing, demonstrating, and qualifying advanced reactor fuel forms necessitates a deeper understanding of how irradiation affects fuels and materials' performance. To achieve a more comprehensive understanding of fuels and materials performance, researchers require more specialized experiments and measurements. The demand for innovative sensors to support nuclear fuel development arises from the complexity of materials' behavior under irradiation and the challenges of deploying instrumentation in Material Test Reactors (MTRs) for irradiation tests. Additionally, measurements of material properties require integrated measurement systems to characterize thermal properties, mechanical properties, chemistry, and microstructure [1]. Among the potential measurement techniques, optical fiber-based sensors have been identified as potential sensors to measure different physical phenomena such as temperature, strain, pressure, and fluid level. Optical fiber sensors have the capability to provide multi-sensing and multiplexing instrumentation, allowing the measurement of different physical parameters within a single sensor configuration, and transmitting data collected at multiple locations through a single fiber. They offer immunity to electromagnetic interference, electrical passivity, compatibility with various sensing methodologies, and cost-effectiveness. Beyond their widespread use in telecommunications, silica fiber-based instruments are utilized in industrial applications, even at temperatures reaching 300?400°C, such as distributed temperature sensing in oil and gas recovery. The Department of Energy (DOE) is interested in using fiber optics to support fuel cycle development [2]. Fiber optics are an excellent candidate for harsh environment sensing, including sensing at very high temperatures (1900oC for sapphire optical fibers). Distributed fiber optic sensing has been deployed in other harsh environments like coal gasification plants [3]. Distributed strain sensing, which operates similarly to distributed temperature sensing, has been deployed to monitor underground mines and fibers have been imbedded in soil to monitor sink-hole development [4][5]. The application of fiber optic sensors to advanced reactor development is a promising area of research.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗
DOE OSTI2021

Biomining Critical Elements and Metals

The US government has identified 17 critical elements, including most rare earth elements (REEs), and metals, which are used extensively in consumer electronics as well as military and national security hardware. We are developing techniques for biomining these elements, the process of using microorganisms to extract critical elements from water, ores, and mine waste to fill these needs. Bioextraction is focusing on: 1) building on our first-year successes of identifying microbes that generate exudates that enhance the extraction of multivalent cations, 2) evaluating available phosphate solubilizing microbes to dissolve apatite and monazite, and 3) and biosurfactant producing microbes. Bioaccumulation efforts involves testing microbes that: 1) naturally release complex exudates that contain organic chelating agents, and 2) naturally accumulate or hyperaccumulate (wt-% levels) metals. Results from year one includes proof of concept that biosurfactant producing microorganisms can release REEs from select ores and that release of REEs is increased by the addition of glucose. Molecular results for microorganism profiling proved a population shift after addition of microorganisms. The study will culminate in a proof-of-concept demonstration, manuscripts, and the data needed for scaledup biomining of REEs.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Rapid and Temporary Deployment of Fiber-Optic Arrays to Measure Surface Chemical Explosion Series with Distributed Acoustic Sensing

Rapid and temporary distributed acoustic sensing (DAS) deployments are crucial for accurately capturing the seismic wavefield following major events, such as earthquakes, or in anticipation of known events of interest, such as chemical explosions. We provide an overview of two DAS campaigns conducted in May and October 2024 to record the seismoacoustic waves generated by two series of surface chemical explosions in New Mexico, United States, involving 1- and 10-ton trinitrotoluene-equivalent charges. In both campaigns, we deployed approximately 2 km of fiber-optic cables in a dry riverbed, about 12 km east of the explosion sites. For the October campaign, seven geophones and two anemometers were collocated with the fiber. We describe the field deployments and present preliminary results from the recorded signals. Specifically, we cross analyze the data recorded in May and October, validate the DAS data with geophone measurements, and highlight the benefits of burying fibers to reduce wind noise and improve signal-to-noise ratios. This study demonstrates the potential of DAS to record the seismoacoustic waves generated by surface chemical explosions of varying sizes at distances of approximately 10 km from the source.

58 GEOSCIENCES↗
DOE OSTI2020

The synergy between stakeholders for cellulosic biofuel development: Perspectives, opportunities, and barriers

While understanding individual stakeholders' perspectives on the adoption and conversion to a biofuel-based landscape has been a subject of many previous studies on biofuels, there has been relatively little attention given to understanding how the interaction between multiple stakeholders involved in biofuel development could influence the widespread adoption of biofuel production. Here, this paper analyzes the key stakeholder interactions utilizing various data sources including survey results, social media posts, and empirical and theoretical analyses. An intensive review is conducted for a number of surveys and research papers on different aspects of biofuel development such as land use choices, biorefinery and transportation, infrastructure development, consumer priorities, environmental impacts, etc. Following that, a stakeholder synergy approach is applied to synthesizing typical responses of stakeholders, such as producers, consumers, biorefineries, rural communities, and the government, and discussing how their responses influence each other's decisions and the overall system performance. Based on the findings of inadequate stakeholder synergy, it is recommended that new surveys and further research should be conducted to understand why synergy between stakeholders in biofuel development is absent. Additionally, this paper provides research perspectives, including (1) applying cutting-edge text-mining techniques to conduct sentiment analysis, and research and public attention analysis; (2) using an agent-based model to simulate stakeholder interactions and understand the factors that influence stakeholder synergy and the emergence of a bioeconomy.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗