Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “DRAG”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,333 records · Page 74

Asymptotic analytical methods in fluid mechanics related to drag prediction

Some recent theoretical work of a purely analytical nature is described which promises to provide engineering predictions for the important drag-related phenomena of flow in the stall regime. This analytical work deals with rigorous asymptotic studies of the complete Navier-Stokes equations that govern the viscous flow around any aerodynamic body under conditions where boundary layer separation takes place from the body surface.

Inger, G. R.↗

Wing Tip Vortex Drag

Optimization of L/D through minimizing induced drag through a detailed flow study together with force, pressure and vorticity measurements is considered. Flow visualization with neutral helium bubbles provides an excellent means of observing the effects of configuration changes.

Muirhead, V. U.↗

Installation drag considerations as related to turboprop and turbofan engines

Some of the specific areas associated with straight jet and turboprop engine installations are outlined where drag reduction and, thus, improved aircraft system performance is obtained. Specific areas constitute air intake sizing for general aviation aircraft, exhaust duct geometries and cooling system arrangements for propeller powered aircraft.

Burnett, G. A.↗

Minimum Vertical Tail Drag

Tail size requirement calculations are presented for a vertical tail performing a coordinated turn reversal at corresponding load requirements with minimum tail drag.

Larrabee, E. E.↗

Theoretical face pressure and drag characteristics of forward-facing steps in supersonic turbulent boundary layers

A theoretical investigation of the pressure distributions and drag characteristics was made for forward facing steps in turbulent flow at supersonic speeds. An approximate solution technique proposed by Uebelhack has been modified and extended to obtain a more consistent numerical procedure. A comparison of theoretical calculations with experimental data generally indicated good agreement over the experimentally available range of ratios of step height to boundary layer thickness from 7 to 0.05.

Patel, D. K.↗

Evaluation of viscous drag reduction schemes for subsonic transports

The results are described of a theoretical study of viscous drag reduction schemes for potential application to the fuselage of a long-haul subsonic transport aircraft. The schemes which were examined included tangential slot injection on the fuselage and various synergetic combinations of tangential slot injection and distributed suction applied to wing and fuselage surfaces. Both passive and mechanical (utilizing turbo-machinery) systems were examined. Overall performance of the selected systems was determined at a fixed subsonic cruise condition corresponding to a flight Mach number of free stream M = 0.8 and an altitude of 11,000 m. The nominal aircraft to which most of the performance data was referenced was a wide-body transport of the Boeing 747 category. Some of the performance results obtained with wing suction are referenced to a Lockheed C-141 Star Lifter wing section. Alternate designs investigated involved combinations of boundary layer suction on the wing surfaces and injection on the fuselage, and suction and injection combinations applied to the fuselage only.

Marino, A.↗

Influence of particle drag coefficient on particle motion in high-speed flow with typical laser velocimeter applications

The effect of using different particle drag coefficient C sub D equations for computing the velocity of seeded particles in high-speed gas flows was investigated. The C sub D equations investigated included the Stokes equation, a second incompressible equation valid for higher relative Reynolds numbers, and six equations that account for the effects of compressibility together with the effects of relative Reynolds numbers greater than one. The flows investigated were center-line nozzle flows, normal shocks, and oblique shocks for free-stream Mach numbers of 1.6 to 6 and stagnation pressures of 1 and 3.4 atmospheres. The net result was empirical C sub D equation based on the latest sphere C sub D data for the low relative Mach number and Reynolds number conditions that are encountered in supersonic flows.

Walsh, M. J.↗

A catalog of atmospheric densities from the drag on five balloon satellites

A catalog of atmospheric densities derived for the drag on five balloon satellites is presented. Much of the catalog was based on precisely reduced Baker-Nunn observations and, for that reason, provides much improved time resolution. The effect of direct solar radiation pressure was precisely evaluated, and that of terrestrial radiation pressure was included in every case. The interval covered for each satellite varies between 3.1 and 7.6 years, with the data extending from early 1961 to early 1973.

Jacchia, L. G.↗

The compressibility rule for drag of airfoil noses

It is shown that the drag of any semi-infinite airfoil section in purely subsonic inviscid flow follows precisely the Prandtl-Glauert compressibility rule. The result for the parabola has application to leading edge corrections in thin airfoil theory.

Jones, R. T.↗

Three-dimensional wings of minimum pressure drag

In linearized flow theory, certain very interesting extremal properties of wings can be derived under rather broad conditions without the use of a complicated mathematical apparatus. The present chapter reviews certain results of this theory and indicates some rather obvious extensions to incorporate various auxiliary conditions. Several examples illustrating the relation between the geometrical features of the wing and the lift distribution for minimum drag are given.

Jones, R. T.↗

Reduction of wave drag by antisymmetric arrangement of wings and bodies

In theory, antisymmetric arrangements of wings and bodies can have smaller wave drag than corresponding mirror-symmetric arrangements. Thus, a long narrow oblique wing which presents the same aspect for two opposite directions of flight is potentially more efficient than corresponding (i.e., structurally equivalent) swept wing. The single continuous wing panel also adapts itself more readily to varying angles of obliquity, and hence, to varying flight speeds. Previous work on the aerodynamics and flight stability of oblique wing combinations is reviewed and a possible mode of application to transport aircraft operating at moderate supersonic speeds is suggested.

Jones, R. T.↗

An experimental and analytical investigation of effect on isolated boattail drag of varying Reynolds numbers up to 130,000,000

An investigation was conducted to determine whether large Reynolds number effects occur on isolated boattails, including an analytical study and tests in a 1/3-meter transonic cryogenic tunnel. This investigation was conducted at an angle of attack of 0 deg at Mach numbers from 0.6 to 0.9 for Reynolds numbers up to 130 million. Results indicate that as the Reynolds number was increased, the static pressure coefficients in the expansion region of the boattail became more negative whereas those in the recompression region became more positive. These two trends were compensating and, as a result, there was only a small effect (if any) of Reynolds numbers on boattail pressure drag.

Reubush, D. E.↗

Caging Mechanism for a drag-free satellite position sensor

A disturbance compensation system for satellites based on the drag-free concept was mechanized and flown, using a spherical proof mass and a cam-guided caging mechanism. The caging mechanism controls the location of the proof mass for testing and constrains it during launch. Design requirements, design details, and hardware are described.

Hacker, R.↗

Boundary layer thickness effect on boattail drag

A combined experimental and analytical program was conducted to investigate the effects of boundary layer changes on the flow over high angle boattail nozzles. The tests were run on an isolated axisymmetric sting mounted model. Various boattail geometries were investigated at high subsonic speeds over a range of boundary layer thicknesses. In general, boundary layer effects were small at speeds up to Mach 0.8. However, at higher speeds significant regions of separated flow were present on the boattail. When separation was present large reductions in boattail drag resulted with increasing boundary layer thickness. The analysis predicts both of these trends.

Blaha, B. J.↗

Attitude translation coupling in a rotating drag-free satellite

The translational and attitude control of a drag-free, rotating satellite are usually designed to be independent of each other. However, coupling may exist which can produce instability. The different types of coupling and the stability conditions are studied, using root locus type techniques. The resulting root loci have unusual shapes due to the nonlinearity of the characteristic polynomial in terms of the coupling parameters. It is possible, however, to use standard root loci techniques by appropriate factoring and subsequent superposition of loci. The effect of the main parameters upon the overall stability of the system is studied. Both, attitude and translation instabilities eventually arise - the former being more critical for typical satellite designs. An analytical expression for the stability boundary is developed.

Sanz Fernandez De Cordova, S.↗