Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Control flows”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,333 records · Page 74
All sourcesNASA NTRSDOE OSTI
NASA NTRS1980

Comparison of methods for prediction of transition by stability analysis

The paper compares several methods of transition prediction of linear stability analysis. The spectral stability analysis code SALLY is used to analyze flows over laminar flow control wings. It is shown that transition prediction by the envelope method and a new modified wave packet method are comparable in reliability, but that the envelope method is more efficient computationally. This is based on the results which show that the wave packet method provides N factors which are at best as consistent as those of the envelope method; since the wave packet method is at least 3 times as expensive as the envelope method, the latter is recommended for engineering design calculations.

Malik, M. R.↗
NASA NTRS1980

On the stability of three-dimensional compressible nonparallel boundary layers

A compressible linear stability theory is presented for three-dimensional nonuniform boundary layers. The amplitude, phase, and wavenumber equations which govern the motion of the disturbance are obtained by using the method of multiple scales. Group velocity trajectories are used to identify the disturbance growth direction. The spatial stability theory is applied to the flow on a laminar flow control supercritical sweptback wing of infinite span. Three different methods are used to calculate the absolute maximum logarithmic amplitude ratio N. In the front crossflow instability region, the method of maximum spatial growth rate predicts large difference in N compared with the method of fixed wavelength and the method of fixed spanwise component of wavelength. This difference decreases in the middle streamwise instability region, and almost vanishes in the rear crossflow instability region. Compressibility of the medium reduces N by about 15% in both the front and rear regions, and by about 40% in the middle region of the wing. Nonuniformity of the medium has large effects specially in the rear region.

El-Hady, N. M.↗
NASA NTRS1982

Hot Film Static-Pressure Probe for Flow-Field Surveys

New hot film static pressure probe significantly reduces response time in flow-field surveys during wind-tunnel tests. Probe incorporates two hot film sensors, unheated film for temperature compensation and heated film for pressure measurement, and sonic orifice for flow control. Hot film prove measures static pressure while compensating for gas temperature.

Weinstein, L. M.↗
NASA NTRS1980

Integrated computer-aided design using minicomputers

Computer-Aided Design/Computer-Aided Manufacturing (CAD/CAM), a highly interactive software, has been implemented on minicomputers at the NASA Langley Research Center. CAD/CAM software integrates many formerly fragmented programs and procedures into one cohesive system; it also includes finite element modeling and analysis, and has been interfaced via a computer network to a relational data base management system and offline plotting devices on mainframe computers. The CAD/CAM software system requires interactive graphics terminals operating at a minimum of 4800 bits/sec transfer rate to a computer. The system is portable and introduces 'interactive graphics', which permits the creation and modification of models interactively. The CAD/CAM system has already produced designs for a large area space platform, a national transonic facility fan blade, and a laminar flow control wind tunnel model. Besides the design/drafting element analysis capability, CAD/CAM provides options to produce an automatic program tooling code to drive a numerically controlled (N/C) machine. Reductions in time for design, engineering, drawing, finite element modeling, and N/C machining will benefit productivity through reduced costs, fewer errors, and a wider range of configuration.

Storaasli, O. O.↗
NASA NTRS1981

Stability of flow over plates with porous suction strips

This paper addresses the stability of two-dimensional, incompressible boundary-layer flow over plates with suction through porous strips. The mean flow is calculated using linearized triple-deck, closed-form solutions. The stability results of the triple-deck theory are shown to be in good agreement with those of the interacting boundary layers. Then different configurations of number, spacing, and mass flow rate through such porous strips are analyzed and compared with nonsimilar uniform-suction stability results from the point of view of applicability to laminar flow control.

Reed, H. L.↗
NASA NTRS1981

Amplified crossflow disturbances in the laminar boundary layer on swept wings with suction

Solution charts of the Orr-Sommerfeld equation for stationary crossflow disturbances are presented for 10 typical velocity profiles on a swept laminar flow control wing. The critical crossflow Reynolds number is shown to be a function of a boundary layer shape factor. Amplification rates for crossflow disturbances are shown to be proportional to the maximum crossflow velocity. A computer stability program called MARIA, employing the amplification rate data for the 10 crossflow velocity profiles, is constructed. This code is shown to adequately approximate more involved computer stability codes using less than two percent as much computer time while retaining the essential physical disturbance growth model.

Dagenhart, J. R.↗
NASA NTRS1982

Probability of laminar flow loss because of ice crystal encounters

A method for combining the cloud detector observation results from the Global Atmospheric Sampling Program (GASP) with Knollenberg probe observations of cloud particle concentration from other programs to derive estimates of the ambient concentration of particles larger than a given size was developed. The method was applied to estimate the probability of encountering particle concentrations which would degrade the performance of laminar flow control (LFC) aircraft. It is concluded that LF loss should occur only about one percent of the time in clear air and that flight within clouds should always result in a significant loss of LF, with 90 percent LF loss occurring about one percent of the time. Preliminary estimates of cloud encounter probability are presented for four airline routes, and conclusions are presented as to the best altitudes for cloud avoidance in extratropical and tropical latitudes.

Davis, R. E.↗
NASA NTRS1982

Feasibility of SPF/DB titanium sandwich for LFC wings

The feasibility of fabricating SPF/DB titanium structures of sufficient smoothness to be used for laminar flow wing surfaces was demonstrated. Two methods of fabricating panels which meet the surface smoothness criteria were demonstrated. The first consists of superplasticity forming/diffusion bonding a panel using steel dies, then machining the surface to the required flatness and finish after forming. This approach, however, was estimated to be more costly than the second approach, in which the panel is formed against ceramic platens which produce the desired surface smoothness without subsequent finishing. Four panels were fabricated, and their surface quality was evaluated. The specified criteria for waviness compared with actual measured values on the panels is shown. The acceptable surface quality as well as feasibility of the laminar flow control surface design, in which separate strips incorporating the boundary layer bleed provisions are bonded into slots on the surface, was also demonstrated.

Mcquilkin, F. T.↗
NASA NTRS1982

Characteristics of future aircraft impacting aircraft and airport compatibility

Results are reported of an opinion survey of selected individuals at the decision-making level within the five major manufacturers of transport aircraft in the United States and Europe. Opinions were obtained concerning both possible and probable existence of over 50 compatibility-related characteristics of transport aircraft in use in the years 1990, 2000, and 2010. The maximum size of aircraft is expected to increase, at a roughly uniform rate, to the year 2010 by 85 percent in passengers, 55 percent in airfreighter payload, and 35 percent in gross weight weight. Companion to the expected growth in payloads and gross weight was the identification of probable increases in aircraft geometrical dimensions and component capability, and use of fully double-decked passenger compartments. Wing span will increase considerably more than normally expected to provide wings of higher aspect ratio. New aircraft features coming into probable use include large turboprops, synthetic jet-A fuel, winglets, wake-vortex-reducing devices and laminar flow control. New operational concepts considered probable include steep approaches, high-speed turnoffs, and taxiway towing for the aircraft, plus passenger bypass of the terminal building, expedited handling of belly cargo and an intermodal cargo container for the payloads.

Conner, D. W.↗
NASA NTRS1982

Finite-difference solution of the compressible stability eigenvalue problem

A compressible stability analysis computer code is developed. The code uses a matrix finite difference method for local eigenvalue solution when a good guess for the eigenvalue is available and is significantly more computationally efficient than the commonly used initial value approach. The local eigenvalue search procedure also results in eigenfunctions and, at little extra work, group velocities. A globally convergent eigenvalue procedure is also developed which may be used when no guess for the eigenvalue is available. The global problem is formulated in such a way that no unstable spurious modes appear so that the method is suitable for use in a black box stability code. Sample stability calculations are presented for the boundary layer profiles of a Laminar Flow Control (LFC) swept wing.

Malik, M. R.↗
NASA NTRS1982

SEPAC flight software detailed design specifications, volume 1

The detailed design specifications (as built) for the SEPAC Flight Software are defined. The design includes a description of the total software system and of each individual module within the system. The design specifications describe the decomposition of the software system into its major components. The system structure is expressed in the following forms: the control-flow hierarchy of the system, the data-flow structure of the system, the task hierarchy, the memory structure, and the software to hardware configuration mapping. The component design description includes details on the following elements: register conventions, module (subroutines) invocaton, module functions, interrupt servicing, data definitions, and database structure.

Source record↗
NASA NTRS1983

Expander for Thin-Wall Tubing

Tool locally expands small-diameter tubes. Tube expander locally expands and deforms tube: Compressive lateral stress induced in elastomeric sleeve by squeezing axially between two metal tool parts. Adaptable to situations in which tube must have small bulge for mechanical support or flow control.

Pessin, R.↗
NASA NTRS1982

A full potential inverse method based on a density linearization scheme for wing design

A mixed analysis inverse procedure based on the full potential equation in conservation form was developed to recontour a given base wing to produce density linearization scheme in applying the pressure boundary condition in terms of the velocity potential. The FL030 finite volume analysis code was modified to include the inverse option. The new surface shape information, associated with the modified pressure boundary condition, is calculated at a constant span station based on a mass flux integration. The inverse method is shown to recover the original shape when the analysis pressure is not altered. Inverse calculations for weakening of a strong shock system and for a laminar flow control (LFC) pressure distribution are presented. Two methods for a trailing edge closure model are proposed for further study.

Shankar, V.↗
NASA NTRS1983

Turbulent drag reduction for external flows

Paper presents a review and summary of turbulent drag reduction approaches applicable to external flows. Because relatively recent and exhaustive reviews exist for laminar flow control and polymer (hydrodynamic) drag reduction, the paper focuses upon the emerging areas of nonplanar geometry and large eddy alteration. Turbulent control techniques for air generally result in modest (but technologically significant) drag reductions (order of 20 percent or less) whereas hydrodynamic approaches can yield drag reductions the order of 70 percent. Paper also includes suggestions for alternative concepts and optimization of existing approaches.

Bushnell, D. M.↗
NASA NTRS1983

Cloud encounter statistics in the 28.5-43.5 KFT altitude region from four years of GASP observations

The results of an analysis of cloud encounter measurements taken at aircraft flight altitudes as part of the Global Atmospheric Sampling Program are summarized. The results can be used in estimating the probability of cloud encounter and in assessing the economic feasibility of laminar flow control aircraft along particular routes. The data presented clearly show the tropical circulation and its seasonal migration; characteristics of the mid-latitude regime, such as the large-scale traveling cyclones in the winter and increased convective activity in the summer, can be isolated in the data. The cloud encounter statistics are shown to be consistent with the mid-latitude cyclone model. A model for TIC (time-in-clouds), a cloud encounter statistic, is presented for several common airline routes.

Jasperson, W. H.↗
NASA NTRS1983

Research and technology, 1983

Highlights of major accomplishments and applications made during the past year illustrate the broad range of research and technology activities at the Langley Research Center. Advances are reported in the following areas: systems engineering and operation; aeronautics; electronics; space applications; aircraft and spacecraft structures; composite structures; laminar flow control; subsonic transport aircraft; and supersonic fighter concepts. Technology utilization efforts described cover a hyperthermia monitor, a lightweight composite wheelchair; and a vehicle ride quality meter.

Source record↗
NASA NTRS1983

Flywheel Electronics

Requirements of the flywheel electronic system are to accelerate the momentum wheel to a fixed maximum speed when solar energy is available and to maintain a constant voltage on the spacecraft bus under varying loads when solar energy is not available. Requirements, energy flow control, types of motors considered, type of electronic control, and efficiency considerations, are outlined.

Nola, F. J.↗