Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Control Theory”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,333 records · Page 74

Research on inverse, hybrid and optimization problems in engineering sciences with emphasis on turbomachine aerodynamics: Review of Chinese advances

Advances in inverse design and optimization theory in engineering fields in China are presented. Two original approaches, the image-space approach and the variational approach, are discussed in terms of turbomachine aerodynamic inverse design. Other areas of research in turbomachine aerodynamic inverse design include the improved mean-streamline (stream surface) method and optimization theory based on optimal control. Among the additional engineering fields discussed are the following: the inverse problem of heat conduction, free-surface flow, variational cogeneration of optimal grid and flow field, and optimal meshing theory of gears.

Liu, Gao-Lian↗

The dynamics and control of large flexible space structures, part 11

A mathematical model is developed to predict the dynamics of the proposed Spacecraft Control Laboratory Experiment during the stationkeeping phase. The Shuttle and reflector are assumed to be rigid, while the mass connecting the Shuttle to the reflector is assumed to be flexible with elastic deformations small as compared with its length. It is seen that in the presence of gravity-gradient torques, the system assumes a new equilibrium position primarily due to the offset in the mass attachment point to the reflector from the reflector's mass center. Control is assumed to be provided through the Shuttle's three torquers and throught six actuators located by painrs at two points on the mass and at the reflector mass center. Numerical results confirm the robustness of an LQR derived control strategy during stationkeeping with maximum control efforts significantly below saturation levels. The linear regulator theory is also used to derive control laws for the linearized model of the rigidized SCOLE configuration where the mast flexibility is not included. It is seen that this same type of control strategy can be applied for the rapid single axis slewing of the SCOLE through amplitudes as large as 20 degrees. These results provide a definite trade-off between the slightly larger slewing times with the considerable reduction in over-all control effort as compared with the results of the two point boundary value problem application of Pontryagin's Maximum Principle.

Bainum, Peter M.↗

Enabling "Fuel" Switching through On-Demand Wind Control

This work demonstrates that classical shear-flow stability theory can be successfully applied to modify wind turbine wakes and also explains the success of several emerging, empirically-arrived control methods (i.e., dynamic induction and helix control). Linear stability theory predictions are extended to include the effects of non-axisymmetric inflow profiles, such as wind shear, which is shown to not strongly affect the primary forcing frequency. The predictions, as well as idealized large-eddy simulations using actuator-line representation of the turbine blades, agree that the n = 0 and ±1 modes have faster initial growth rates than higher-order modes, suggesting the lower-order modes are more appropriate for wake control. Exciting the lower-order modes with periodic pitching of the blades produces higher entrainment into the wake and consequently faster wake recovery.

17 WIND ENERGY↗

Identification of flexible aircraft from flight data

This paper describes a frequency-domain method for the estimation of the aeroelastic equations of motion of an aircraft using discrete sinusoidal inputs to the control surface actuators. The theory of estimation of the signal inputs and outputs is described as well as the method of obtaining accurate transfer functions from the resulting Bode plots. Methods of quantifying the accuracy of the results from more than one control input are discussed along with ways to obtain state-space and reduced-order models from the transfer function estimates. Presented is a summary of the results obtained in using the technique to develop a model of the USAF Total In-Flight Simulator (TIFS) aircraft which includes five symmetrical elastic modes of motion of the aircraft.

Eulrich, B. J.↗

Collapsing universe before time

Abstract In this note, we prove analytic bounds on the equation of state of a cosmological fluid composed of an arbitrary number of canonical scalars evolving in a negative multi-exponential potential. Because of the negative energy, the universe is contracting and eventually undergoes a big crunch. A contracting universe is a fundamental feature of models of ekpyrosis and cyclic universes, which are a proposed alternative to cosmic inflation to solve the flatness and horizon problems. Our analytic bounds set quantitative constraints on general effective theories of ekpyrosis. When applied to specific top-down constructions, our bounds can be used to determine whether ekpyrosis could in principle be realized. We point out some possible sources of tension in realizing the ekpyrotic universe in controlled constructions of string theory.

Astronomy & Astrophysics↗

Complete synchronization of uncertain chaotic systems via a single proportional adaptive controller: A comparative study

This paper addresses a comparative computational study on the synchronization quality, cost and converging speed for two pairs of identical chaotic and hyperchaotic systems with unknown time-varying parameters. It is assumed that the unknown time-varying parameters are bounded. Based on the Lyapunov stability theory and using the adaptive control method, a single proportional controller is proposed to achieve the goal of complete synchronizations. Accordingly, appropriate adaptive laws are designed to identify the unknown time-varying parameters. The designed control strategy is easy to implement in practice. Numerical simulations results are provided to verify the effectiveness of the proposed synchronization scheme.

42 ENGINEERING↗

State-of-the-art Theory Application

Nonlinear failure detection and isolation (FDI), robust FDI, coordinate controller, detector, estimator, and isolator, AI/modern systems theory, sensor fusion, and man-machine interaction are addressed.

Gully, S.↗

Circulating Current Resonant Oscillation in Modular Multilevel Converters for Variable Frequency Operation and Its Suppression Method

This paper studies the phenomenon of resonant oscillation in Modular Multilevel Converters (MMCs) for variable frequency operation. Without proper control, it may easily induce huge MMC inner circulating currents and damage major power devices. A Laplace model is established to clarify the mechanism of resonant oscillation in MMCs, and Bode diagrams are used to study the frequency response over a wide frequency range. Meanwhile, a straightforward resonant suppression method based on circulating current control is used to damp out the resonant condition, and a cross comparison is conducted in terms of system losses, capacitor voltage ripples, and load voltage harmonics with and without the resonant oscillation. Both simulation and experimental results are provided to validate the MMC resonant oscillation theory and its suppression control method.

Modular multilevel converter, resonant oscillation↗

Optimal Control of a Parabolic Equation with Dynamic Boundary Condition

We investigate a control problem for the heat equation. The goal is to find an optimal heat transfer coefficient in the dynamic boundary condition such that a desired temperature distribution at the boundary is adhered. To this end we consider a function space setting in which the heat flux across the boundary is forced to be an L{sup p} function with respect to the surface measure, which in turn implies higher regularity for the time derivative of temperature. We show that the corresponding elliptic operator generates a strongly continuous semigroup of contractions and apply the concept of maximal parabolic regularity. This allows to show the existence of an optimal control and the derivation of necessary and sufficient optimality conditions.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Nonlinear flight test trajectory controllers for aircraft

Flight test trajectory control systems are designed to enable the pilot to follow complex trajectories for evaluating an aircraft within its known flight envelope and to explore the boundaries of its capabilities. Previous design approaches were baed on linearized aircraft models necessitating a large amount of data storage along with gain schedules. In this paper, the synthesis of nonlinear flight test trajectory controllers for a fixed-wing aircraft is described. This approach uses singular perturbation theory and the recently developed theory of prelinearizing transformations. These controllers do not require gain scheduling for satisfactory operation, can be used in arbitrarily nonlinear maneuvers, and are mechanized with a direct, noniterative analytic solution.

Menon, P. K. A.↗

Study of Globus-M Tokamak Poloidal System and Plasma Position Control

In order to provide efficient performance of tokamaks with vertically elongated plasma position, control systems for limited and diverted plasma configuration are required. The accuracy, stability, speed of response, and reliability of plasma position control as well as plasma shape and current control depend on the performance of the control system. Therefore, the problem of the development of such systems is an important and actual task in modern tokamaks. In this study, the measured signals from the magnetic loops and Rogowski coils are used to reconstruct the plasma equilibrium, for which linear models in small deviations are constructed. We apply methods of the H∞-optimization theory to the synthesize control system for vertical and horizontal position of plasma capable to working with structural uncertainty of the models of the plant. These systems are applied to the plasma-physical DINA code which is configured for the tokamak Globus-M plasma. The testing of the developed systems applied to the DINA code with Heaviside step functions have revealed the complex dynamics of plasma magnetic configurations. Being close to the bifurcation point in the parameter space of unstable plasma has made it possible to detect an abrupt change in the X-point position from the top to the bottom and vice versa. Development of the methods for reconstruction of plasma magnetic configurations and experience in designing plasma control systems with feedback for tokamaks provided an opportunity to synthesize new digital controllers for plasma vertical and horizontal position stabilization. It also allowed us to test the synthesized digital controllers in the closed loop of the control system with the DINA code as a nonlinear model of plasma.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

The hitchhiker's guide to 4d $\mathcal{N}=2$ superconformal field theories

Superconformal field theory with \mathcal{N}=2 𝒩 = 2 supersymmetry in four dimensional spacetime provides a prime playground to study strongly coupled phenomena in quantum field theory. Its rigid structure ensures valuable analytic control over non-perturbative effects, yet the theory is still flexible enough to incorporate a large landscape of quantum systems. Here we aim to offer a guidebook to fundamental features of the 4d \mathcal{N}=2 𝒩 = 2 superconformal field theories and basic tools to construct them in string/M-/F-theory. The content is based on a series of lectures at the Quantum Field Theories and Geometry School in July 2020.

Akhond, Mohammad↗

Control Laws for a Dual-Spin Stabilized Platform

This paper describes two attitude control laws suitable for atmospheric flight vehicles with a steady angular momentum bias in the vehicle yaw axis. This bias is assumed to be provided by an internal flywheel, and is introduced to enhance roll and pitch stiffness. The first control law is based on Lyapunov stability theory, and stability proofs are given. The second control law, which assumes that the angular momentum bias is large, is based on a classical PID control. It is shown that the large yaw-axis bias requires that the PI feedback component on the roll and pitch angle errors be cross-fed. Both control laws are applied to a vehicle simulation in the presence of disturbances for several values of yaw-axis angular momentum bias. It is seen that both control laws provide a significant improvement in attitude performance when the bias is sufficiently large, but the nonlinear control law is also able to provide improved performance for a small value of bias. This is important because the smaller bias corresponds to a smaller requirement for mass to be dedicated to the flywheel.

Lim, K. B.↗

Flow Control and Measurement in Electric Propulsion Systems: Towards an AIAA Reference Standard

Accurate control and measurement of propellant flow to a thruster is one of the most basic and fundamental requirements for operation of electric propulsion systems, whether they be in the laboratory or on flight spacecraft. Hence, it is important for the electric propulsion community to have a common understanding of typical methods for flow control and measurement. This paper addresses the topic of propellant flow primarily for the gaseous propellant systems which have dominated laboratory research and flight application over the last few decades, although other types of systems are also briefly discussed. While most flight systems have employed a type of pressure-fed flow restrictor for flow control, both thermal-based and pressure-based mass flow controllers are routinely used in laboratories. Fundamentals and theory of operation of these types of controllers are presented, along with sources of uncertainty associated with their use. Methods of calibration and recommendations for calibration processes are presented. Finally, details of uncertainty calculations are presented for some common calibration methods and for the linear fits to calibration data that are commonly used.

thrust measurement↗