SEARCH · Engineering Papers

Results for “Configuration interaction”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,333 records · Page 74

All sources NASA NTRS DOE OSTI

NASA NTRS1978

Acoustic tests of duct-burning turbofan jet noise simulation

The results of a static acoustic and aerodynamic performance, model-scale test program on coannular unsuppressed and multielement fan suppressed nozzle configurations are summarized. The results of the static acoustic tests show a very beneficial interaction effect. When the measured noise levels were compared with the predicted noise levels of two independent but equivalent conical nozzle flow streams, noise reductions for the unsuppressed coannular nozzles were of the order of 10 PNdB; high levels of suppression (8 PNdB) were still maintained even when only a small amount of core stream flow was used. The multielement fan suppressed coannular nozzle tests showed 15 PNdB noise reductions and up to 18 PNdB noise reductions when a treated ejector was added. The static aerodynamic performance tests showed that the unsuppressed coannular plug nozzles obtained gross thrust coefficients of 0.972, with 1.2 to 1.7 percent lower levels for the multielement fan-suppressed coannular flow nozzles. For the first time anywhere, laser velocimeter velocity profile measurements were made on these types of nozzle configurations and with supersonic heated flow conditions. Measurements showed that a very rapid decay in the mean velocity occurs for the nozzle tested.

Knott, P. R.↗

DOE OSTI2023

Manipulating Growth and Propagation of Correlations in Dipolar Multilayers: From Pair Production to Bosonic Kitaev Models

Here, we study the nonequilibrium dynamics of dipoles confined in multiple stacked two-dimensional layers realizing a long-range interacting quantum spin 1/2 XXX model. We demonstrate that strong in-plane interactions can protect a manifold of collective layer dynamics. This then allows us to map the many-body spin dynamics to bosonic models. In a bilayer configuration we show how to engineer the paradigmatic two-mode squeezing Hamiltonian known from quantum optics, resulting in exponential production of entangled pairs and generation of metrologically useful entanglement from initially prepared product states. In multilayer configurations we engineer a bosonic variant of the Kitaev model displaying chiral propagation along the layer direction. Our study illustrates how the control over interactions, lattice geometry, and state preparation in interacting dipolar systems uniquely afforded by AMO platforms such as Rydberg and magnetic atoms, polar molecules, or trapped ions allows for the control over the temporal and spatial propagation of correlations for applications in quantum sensing and quantum simulation.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

DOE OSTI2023

An Alternative to Solution Experiments for Nuclear Data Validation: Reflection and Interaction of Juxtaposed Uranium (RAIJU) Experiment Design

The need for solution experiments was thoroughly discussed at the recent NCERC (National Criticality Experiments Research Center) Futures Meeting in September 2022 for multiple applications including criticality safety, training, and nuclear data. However, this capability does not exist anywhere in the United States. NCERC, located at the Nevada National Security Site and operated by LANL (Los Alamos National Laboratory) is the only general-purpose critical experiments laboratory in the United States. However, solution experiments are not authorized at NCERC, and obtaining that authorization would be too time consuming and costly to happen in the foreseeable future. An alternative is needed – an experimental configuration with the homogeneity of liquid experiments, but without being a liquid. This project, Reflection and Interaction of Juxtaposed Uranium (RAIJU) will fill the gap in capability within LANL, the U.S. Department of Energy, and the international community and will support current and future nuclear material processing needs.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

NASA NTRS1993

Comprehensive investigation of HgCdTe metalorganic chemical vapor deposition

The principal objective of this experimental and theoretical research program was to explore the possibility of depositing high quality epitaxial CdTe and HgCdTe at very low pressures through metalorganic chemical vapor deposition (MOCVD). We explored two important aspects of this potential process: (1) the interaction of molecular flow transport and deposition in an MOCVD reactor with a commercial configuration, and (2) the kinetics of metal alkyl source gas adsorption, decomposition and desorption from the growing film surface using ultra high vacuum surface science reaction techniques. To explore the transport-reaction issue, we have developed a reaction engineering analysis of a multiple wafer-in-tube ultrahigh vacuum chemical vapor deposition (UHV/CVD) reactor which allows an estimate of wafer or substrate throughput for a reactor of fixed geometry and a given deposition chemistry with specified film thickness uniformity constraints. The model employs a description of ballistic transport and reaction based on the pseudo-steady approximation to the Boltzmann equation in the limit of pure molecular flow. The model representation takes the form of an integral equation for the flux of each reactant or intermediate species to the wafer surfaces. Expressions for the reactive sticking coefficients (RSC) for each species must be incorporated in the term which represents reemission from a wafer surface. The interactions of MOCVD precursors with Si and CdTe were investigated using temperature programmed desorption (TPD) in ultra high vacuum combined with Auger electron spectroscopy (AES). These studies revealed that diethyltellurium (DETe) and dimethylcadmium (DMCd) adsorb weakly on clean Si(100) and desorb upon heating without decomposing. These precursors adsorb both weakly and strongly on CdTe(111)A, with DMCd exhibiting the stronger interaction with the surface than DETe.

Raupp, Gregory B.↗

DOE OSTI2023

Attosecond light-field control of high-density plasmas (Final Scientific/Technical Report)

Sub-optical-cycle dynamics of dense electron bunches in relativistic-intensity laser—solid interactions (relativistic plasma mirrors) lead to the emission of high-order harmonics and attosecond light pulses. The aim of this project was to advance our understanding of the fundamental principles underlying high-energy-density physics behind this phenomenon. We achieved this goal by conducting experiments and a comprehensive theoretical analysis of harmonics driven by specially tailored light waveforms providing precise control over the sub-laser-cycle trajectories of the emitting electron bunches. The multi-color laser waveforms, generated in our experiments in a cascaded plasma mirror configuration, allowed us to manipulate (enhance and suppress) harmonic generation in relativistic laser-solid interactions by adjusting the relative phase between the colors.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

DOE OSTI2026

Interplay of ferromagnetic and antiferromagnetic interactions in epitaxial Co 3 ZnN

Antiperovskite nitrides with the general formula M 3 AN have attracted significant attention due to their tunable electronic and magnetic properties. Among them are many cobalt-based compounds predicted to exhibit high thermodynamic stability and intriguing magnetic behavior. Here, we report the synthesis and magnetic characterization of epitaxial Co3ZnN thin films grown by radio frequency sputtering on SrTiO 3 (STO) and MgO substrates. X-ray diffraction confirms phase-pure (00l)-oriented films with cube-on-cube epitaxy on STO, with a c-lattice parameter of 3.752 Å. Magnetic measurements reveal clear hysteresis at 2 K with a coercive field of ∼0.11 T and a small net moment of 0.108 μ B /f.u., suggesting either a canted antiferromagnetic (AFM) or ferrimagnetic (FiM) configuration. Temperature-dependent magnetization measurements show a transition near 25 K, with strong AFM interactions with Curie–Weiss temperature (Θ) = −80.13 K. Complementary density functional theory and Monte Carlo simulations indicate a ferromagnetic (FM) ground state, with the FM–AFM energy difference decreasing systematically with increasing supercell size, consistent with competition between FM and AFM/FiM interactions. These results highlight Co3ZnN as a magnetically complex antiperovskite nitride with competing exchange interactions.

36 MATERIALS SCIENCE↗

NASA NTRS1980

Strake/delta wing interactions at high angles of attack

The method of vortex discretization is used to analyze the interaction of the vorticity generated by a strake, with the flow over a delta wing. The validity of the approach is first established by making comparisons with established methods for dealing with delta wings, after which compound delta planforms are discussed. An understanding of the favorable interference effects normally associated with this type of configuration is obtained and results are presented to quantify the expected lift increments resulting from the strake interaction.

Bloor, M. I. G.↗

NASA NTRS1990

The acoustic results of a United Technologies scale model helicopter rotor tested at DNW

In a major cooperative program between U.S. Government agencies (represented by the U.S. Army Aeroflightdynamics Directorate and NASA Ames and Langley Research Centers) and United Technologies Corp., a 1/6 geometrically and aeroelastically scaled UTC model helicopter rotor was tested in the open-jet anechoic test section of the Duits-Nederlandse Windtunnel in the Netherlands. As the fourth entry under the Aerodynamic and Acoustic Testing of Model Rotors Program, several comprehensive acoustic and aerodynamic databases were obtained relating the important aerodynamic phenomena to both the near- and far-field acoustic radiation. In particular, high speed impulsive noise and blade-vortex interaction are of primary interest. This paper provides an initial summary of the acoustic measurements acquired for some of the different configurations tested. A review of the baseline swept tip rotor acoustic characteristics in the regimes of high speed forward flight, where high speed impulsive noise dominates, and low speed descent, where severe blade vortex interaction noise occurs, is presented. The trends of these primary noise sources are studied as the first step in validating the data for release and application.

Liu, Sandy R.↗

NASA NTRS1976

General aviation design synthesis utilizing interactive computer graphics

Interactive computer graphics is a fast growing area of computer application, due to such factors as substantial cost reductions in hardware, general availability of software, and expanded data communication networks. In addition to allowing faster and more meaningful input/output, computer graphics permits the use of data in graphic form to carry out parametric studies for configuration selection and for assessing the impact of advanced technologies on general aviation designs. The incorporation of interactive computer graphics into a NASA developed general aviation synthesis program is described, and the potential uses of the synthesis program in preliminary design are demonstrated.

Galloway, T. L.↗

NASA NTRS2014

Exploration of the Theoretical Physical Capacity of the John F. Kennedy International Airport Runway System

A design study was completed to explore the theoretical physical capacity (TPC) of the John F. Kennedy International Airport (KJFK) runway system for a northflow configuration assuming impedance-free (to throughput) air traffic control functionality. Individual runways were modeled using an agent-based, airspace simulation tool, the Airspace Concept Evaluation System (ACES), with all runways conducting both departures and arrivals on a first-come first-served (FCFS) scheduling basis. A realistic future flight schedule was expanded to 3.5 times the traffic level of a selected baseline day, September 26, 2006, to provide a steady overdemand state for KJFK runways. Rules constraining departure and arrival operations were defined to reflect physical limits beyond which safe operations could no longer be assumed. Safety buffers to account for all sources of operational variability were not included in the TPC estimate. Visual approaches were assumed for all arrivals to minimize inter-arrival spacing. Parallel runway operations were assumed to be independent based on lateral spacing distances. Resulting time intervals between successive airport operations were primarily constrained by same-runway and then by intersecting-runway spacing requirements. The resulting physical runway capacity approximates a theoretical limit that cannot be exceeded without modifying runway interaction assumptions. Comparison with current KJFK operational limits for a north-flow runway configuration indicates a substantial throughput gap of approximately 48%. This gap may be further analyzed to determine which part may be feasibly bridged through the deployment of advanced systems and procedures, and which part cannot, because it is either impossible or not cost-effective to control. Advanced systems for bridging the throughput gap may be conceptualized and simulated using this same experimental setup to estimate the level of gap closure achieved.

Neitzke, Kurt W.↗

DOE OSTI2021

Predictability of Localized Plasmonic Responses in Nanoparticle Assemblies

Design of nanoscale structures with desired optical properties is a key task for nanophotonics. In this work, the correlative relationship between local nanoparticle geometries and their plasmonic responses is established using encoder-decoder neural networks. In the im2spec network, the relationship between local particle geometries and local spectra is established via encoding the observed geometries to a small number of latent variables and subsequently decoding into plasmonic spectra; in the spec2im network, the relationship is reversed. Surprisingly, these reduced descriptions allow high-veracity predictions of local responses based on geometries for fixed compositions and surface chemical states. Analysis of the latent space distributions and the corresponding decoded and closest (in latent space) encoded images yields insight into the generative mechanisms of plasmonic interactions in the nanoparticle arrays. Ultimately, this approach creates a path toward determining configurations that yield the spectrum closest to the desired one, paving the way for stochastic design of nanoplasmonic structures.

nanoparticle arrays↗

DOE OSTI2022

Enhanced mobility of cations and anions in the redox state: The polaronium mechanism

Hugely enhanced slow-ion diffusivity has been widely observed under extreme redox conditions and for unclear reasons. Aided by first-principles calculations on model systems of ZrO 2 , CeO 2 , BaTiO 3 and Li 4/3 Mn 2/3 O 2 , here we successfully explained the intriguing phenomenon by a polaronium mechanism. We found a polaronium, defined as a transitory complex of a polaronic electron or hole and a migrating counterion, becomes highly mobile when the counterion comes from a d 0 or f 0 cation (e.g., Zr 4+ , Ti 4+ and Ce 4 ) or a p 6 anion (e.g., O 2- ) in the host compound. Upon a redox reaction, the complex attains a d 1 /f 1 or p 5 configuration, which spontaneously forms because it is favored by an electron-phonon interaction (manifest as the Jahn-Teller effect in high symmetry systems) that enables local relaxation and lowers the system energy. Here our calculations found such interaction reaching its peak at the saddle point where the local environment is softest, so soft that it allows a reorientation of the anisotropic d/f/p orbital to minimize the electron repulsion locally. Since the complex may dissolve after a successful ion-migration event, the redox electron/hole can be recycled to form another free-radical-like polaronium elsewhere, thereby enhancing ion migration repeatedly. The proposed polaronium mechanism, which also operates in ceramics doped with mixed-valence cations, is most relevant under dynamic and extreme thermal/field/irradiation conditions where extra electrons/holes are abundantly generated by non-equilibrium redox reactions. For such operations, some with emerging applications, our diffusion-enhancing mechanism may provide new theoretical insight to help understand their material/microstructure stability and performance.

36 MATERIALS SCIENCE↗

DOE OSTI2025

Monochromatization interaction region optics design for direct s-channel Higgs production at FCC-ee

The FCC-ee offers the potential to measure the electron Yukawa coupling via direct s-channel Higgs production, e + e − → H , at a centre-of-mass (CM) energy of ∼125 GeV. This measurement is significantly facilitated if the CM energy spread of e + e − collisions can be reduced to a level comparable to the natural width of the Higgs boson, Γ H = 4.1 MeV, without substantial loss in luminosity. Achieving this reduction in collision-energy spread is possible through the “monochromatization” concept. The basic idea is to create opposite correlations between spatial position and energy deviation within the colliding beams, which can be accomplished in beam optics by introducing a nonzero dispersion function with opposite signs for the two beams at the interaction point. Since the first proposal in 2016, the implementation of monochromatization at the FCC-ee has been continuously improved, starting from preliminary parametric studies. In this paper, we present a detailed study of the interaction region optics design for this newly proposed collision mode, exploring different potential configurations and their implementation in the FCC-ee global lattice, along with beam dynamics simulations and performance evaluations including the impact of “beamstrahlung.”

43 PARTICLE ACCELERATORS↗

DOE OSTI2021

How Do Ionic Liquids “Fold” Ionenes? Computational and Experimental Analysis of Imidazolium Polymers Based on Ether and Alkyl Chain Variations Dissolved in an Ionic Liquid

Molecular dynamics (MD) simulations and complementary experiments are used here to understand the inter- and intramolecular structure and conformational properties of ionenes (i.e., cationic polymers formed from condensation reactions) dissolved in an ionic liquid (IL), 1-ethyl-3-methylimidazolium bistriflimide [C 2 mim + ][Tf 2 N - ]. The simulated structural properties are benchmarked against experimental analyses of these same polymers, mainly using dynamic light scattering (DLS) experiments. Four different imidazolium ionenes are considered, corresponding to variations in the chemistry and structure of the repeat units including: (1) poly (decylimidazolium) (PD 10 ); (2) poly (tetraethyleneglycolimidazolium) (PE 10 ); (3) alternating copolymer (P(ED) 5 ); and (4) a block copolymer (PE 5 D 5 ). Detailed computational analyses of the polymer structure and conformational properties were performed, including the radius of gyration, end-to-end distance, torsional distributions, and site-site and spatial distribution functions. Overall, there is a competition between intramolecular associations between the imidazolium groups and the ether sites in the polymers versus the intermolecular interactions of the polymer imidazolium groups with the surrounding anion molecules. The polymer with only ether linkages (PE 10 ) results in the most intramolecular interactions, leading to significant coiling behavior and chain contraction. These strong interactions reduce chain flexibility, but they also result in much more linear chain configurations and alignment of the imidazolium groups. The polymer structure is strongly affected as the concentration of alkyl groups is increased, and we find that the polymer architecture (alternating versus block copolymer) also has an important influence. Furthermore, these detailed observations are important for understanding the connection between the molecular design of imidazolium polymers and their emergent structural properties, which could lead to unique opportunities for creating polymer composites.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2022

Nonreciprocal directional dichroism at telecom wavelengths

Magnetoelectrics with ultra-low symmetry and spin-orbit coupling are well known to display a number of remarkable properties including nonreciprocal directional dichroism. As a polar and chiral magnet, Ni 3 TeO 6 is predicted to host this effect in three fundamentally different configurations, although only two have been experimentally verified. Inspired by the opportunity to unravel the structure-property relations of such a unique light-matter interaction, we combined magneto-optical spectroscopy and first-principles calculations to reveal nonreciprocity in the toroidal geometry and compared our findings with the chiral configurations. We find that formation of Ni toroidal moments is responsible for the largest effects near 1.1 eV—a tendency that is captured by our microscopic model and computational implementation. At the same time, we demonstrate deterministic control of nonreciprocal directional dichroism in Ni 3 TeO 6 across the entire telecom wavelength range. This discovery will accelerate the development of photonics applications that take advantage of unusual symmetry characteristics.

36 MATERIALS SCIENCE↗

DOE OSTI2024

Magnetic tunability in tetragonal Mn–Rh–Ir–Sn inverse Heusler compounds

Abstract Gaining control over magnetic structure has been an ongoing challenge in materials that form complex, nanoscale, and non-collinear magnetic configurations. Recently, it was predicted that tuning the ratio of the Dzyaloshinskii–Moriya interaction to the uniaxial magnetic anisotropy in tetragonal inverse Heuslers through changes in composition could allow a range of interesting magnetic states to be accessed, from simple ferrimagnetism, to helical and antiskyrmionic phases. Here, we show tunability of the magnetic phase behavior in the Mn–Rh–Sn system through Ir substitution on the Rh substructure. Iridium substitution correlates to an increase in the strength of ferromagnetic exchange couplings, at the expense of antiferromagnetic exchange couplings. However, we do not observe the complex non-collinear magnetic phases proposed previously, likely due to the extremely narrow composition window where these phases are predicted to form in a bulk sample. This work highlights the sensitivity of complex magnetic structures to stoichiometry, which makes them difficult to discover empirically.

Physics↗

DOE OSTI2025

Minimal cyclic behavior in sheared amorphous solids

Although jammed packings of soft spheres exist in potential energy landscapes with a vast number of minima, when subjected to cyclic shear they may revisit the same configurations repeatedly. Simple hysteretic spin models, in which particle rearrangements are represented by interacting spin flips called hysterons, capture many features of this periodic behavior. Yet it has been unclear to what extent individual rearrangements can be described by such binary objects and how such objects interact with one another. Using a particularly sensitive algorithm, we identify rearrangements in simulated jammed packings and select pairs of rearrangements that undo one another to create periodic cyclic behavior. We find that the rearrangement pairs surprisingly persist down to the smallest increments in strain, even in the smallest systems we can study. We explore the statistics of these rearrangement pairs and find that there is a relation between the amount of hysteresis and the energy drop and mean-square displacement of the particles; these results are inconsistent with the scaling found in models that treat rearrangements as localized buckling events. Finally, our analysis shows that there is no clean distinction between the particle motions that represent the identity of a single, individual rearrangement and the particle motions that lead to interactions between separated rearrangements or hysterons. These results offer insight into how complex systems such as amorphous solids can reach a limit cycle.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

DOE OSTI2024

hypredrive: high-level interface for solving linear systems with hypre

This software introduces a high-level interface designed to simplify solving linear systems using hypre, a renowned library for such computational challenges. It is crafted to be accessible and user-friendly, making the powerful capabilities of hypre available to a broader audience without requiring in-depth technical knowledge. The interface is characterized by its use of YAML for input, a format celebrated for its structured yet straightforward readability. This choice ensures that users can easily configure the software to meet their specific needs. Additionally, the software boasts an intuitive API that encapsulates hypre's functionalities, making it easier for users to interact with the process of solving linear systems. It is particularly beneficial for prototyping, offering a quick and efficient means to test various solver and preconditioner configurations. Furthermore, the software allows for the creation of an offline testing framework in which predefined linear systems are read from files and benchmarked with user-defined solution strategies. This makes it an invaluable tool for developers and researchers exploring and validating their computational models. Overall, the software serves as a bridge, bringing the advanced computational capabilities of hypre closer to users who may need more specialized technical expertise, thereby facilitating innovation and exploration in the field of numerical linear algebra.

Paludetto Magri, Victor↗