Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Comparison”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,333 records · Page 74

Computed and observed ocean topography - A comparison

The Goddard Space Flight Center's latest Gravity Earth Model, GEM-8, was used to construct a static sea surface. Such a surface corresponds to the surface of an ocean without the time-varying effects of atmospheric pressure, surface wind friction, tides, and currents. It conforms to a surface dictated by the earth's gravitational and rotational forces. The sea surface model is the result of analyzing more than 500,000 satellite observations together with about 1600 5 deg x 5 deg and about 38,000 1 deg x 1 deg surface gravity anomalies. Preliminary comparisons between the computed and measured sea surface topography indicate that they agree quite well and differ by less than 1 m in many places including the Atlantic test area. Sea-surface features such as undulations caused by trenches and ridges are clearly and accurately detectable. The use of altimeter data for orbit computation reduces the uncertainty of the spacecraft height and thus the errors of the sea-surface topography.

Vonbun, F. O.↗

Nightglow emissions of OH/X 2 pi/ - Comparison of theory and measurements in the /9-3/ band

The visible airglow experiments on the Atmosphere Explorer C and E satellites have viewed the (9-3) band nightglow emission of the excited hydroxyl radical in the lower thermosphere at tropical latitudes. The surface brightnesses observed at similar local times vary by approximately a factor of 2. Comparison of the measurements with time-dependent photochemical calculations shows reasonable agreement and indicates that temporal changes in atmospheric transport processes are the most likely explanation of the nightglow variations.

Frederick, J. E.↗

A comparison of constant-load and constant-deflection stress-corrosion tests on precracked DCB specimens

A comparison is made between measurements of stress-corrosion crack propagation made by a constant-load procedure and by a constant-deflection procedure. Precracked double cantilever beam specimens from 7075 aluminum alloy plate were used. The specimens were oriented in such a way that cracking would begin in the short-transverse plane and would propagate in the rolling direction. The specimens were subjected to a buffered salt-chromate solution and a 3.6% synthetic sea salt solution. The measurements were made optically with a binocular microscope. Stress intensities and crack lengths were calculated and crack velocities were obtained. Velocity was plotted against the average calculated stress intensity. Good agreement between the two methods was found for the salt-chromate solution, although some descrepancies were noted for the artificial sea salt solution.

Dorward, R. C.↗

Comparison of nozzle and afterbody surface pressures from wind tunnel and flight test of the YF-17 aircraft

Results are reported from the initial phase of an effort to provide an adequate technical capability to accurately predict the full scale, flight vehicle, nozzle-afterbody performance of future aircraft based on partial scale, wind tunnel testing. The primary emphasis of this initial effort is to assess the current capability and identify the cause of limitations on this capability. A direct comparison of surface pressure data is made between the results from an 0.1-scale model wind tunnel investigation and a full-scale flight test program to evaluate the current subscale testing techniques. These data were acquired at Mach numbers 0.6, 0.8, 0.9, 1.2, and 1.5 on four nozzle configurations at various vehicle pitch attitudes. Support system interference increments were also documented during the wind tunnel investigation. In general, the results presented indicate a good agreement in trend and level of the surface pressures when corrective increments are applied for known effects and surface differences between the two articles under investigation.

Lucas, E. J.↗

Comparisons of measured and calculated potential magnetic fields

Photospheric line-of-sight and transverse-magnetic-field data obtained, with a vector magnetograph system for an isolated sunspot are described. A study of the linear polarization patterns and of the calculated transverse field lines indicates that the magnetic field of the region is very nearly potential. The H-alpha fibril structures of this region as seen in high-resolution photographs corroborate this conclusion. Consequently, a potential-field calculation is described using the measured line-of-sight fields together with assumed Neumann boundary conditions; both are necessary and sufficient for a unique solution. The computed transverse fields are then compared with the measured transverse fields to verify the potential-field model and assumed boundary values. The implications of these comparisons for the validity of magnetic-field extrapolations using potential theory are discussed.

Hagyard, M. J.↗

Comparison of 74-MHz interplanetary scintillation and IMP 7 observations of the solar wind during 1973

Solar wind velocities measured by earth-orbiting spacecraft are compared with velocities determined from interplanetary scintillation (IPS) observations for 1973, a period when high-velocity streams were prevalent. The spacecraft and IPS velocities agree well in the mean and are highly correlated. No simple model for the distribution of enhanced turbulence within streams is sufficient to explain the velocity comparison results for the entire year. Although a simple proportionality between density fluctuation level and bulk density is consistent with IPS velocities for some periods, some streams appear to have enhanced turbulence in the high-velocity region, where the density is low.

Coles, W. A.↗

Gas densities near 230 km from orbital drag and mass spectrometer measurements - A comparison

Perigee density data near 230 km for the Aeros satellite are analyzed for more than 1000 orbits. A comparison method for such data was developed which is based on the observed rate of change of orbital period as compared with the orbital decay computed from mass-spectrometer data obtained at discrete positions along the orbit. In general, the method confirms the good agreement of the average ratio of in-situ and orbit-drag-inferred perigee densities. In the case of Aeros, absolute densities measured by the NATE mass spectrometer are confirmed.

Roemar, M.↗

Comparison of calculated and altitude-facility-measured thrust and airflow of two prototype F100 turbofan engines

A comparison is made of the facility performance data for the two engines with an engine performance model, and it provides corrections that can be applied to the model so that it represents the test engines accurately over the flight envelope. Test conditions ranged from Mach numbers of 0.80 to 2.00 and altitudes from 4020 meters to 15,240 meters. Two distortion screens were used to determine the effect of distortion on airflow. Reynolds number effects were also determined. Engine hysteresis is documented, as is an attempt to determine engine degradation. The calibrated engine model had a twice standard deviation accuracy of approximately 1.24 percent for corrected airflow and 2.38 percent for gross thrust.

Kurtenbach, F. J.↗

An analytical technique for predicting the characteristics of a flexible wing equipped with an active flutter-suppression system and comparison with wind-tunnel data

An analytical technique for predicting the performance of an active flutter-suppression system is presented. This technique is based on the use of an interpolating function to approximate the unsteady aerodynamics. The resulting equations are formulated in terms of linear, ordinary differential equations with constant coefficients. This technique is then applied to an aeroelastic model wing equipped with an active flutter-suppression system. Comparisons between wind-tunnel data and analysis are presented for the wing both with and without active flutter suppression. Results indicate that the wing flutter characteristics without flutter suppression can be predicted very well but that a more adequate model of wind-tunnel turbulence is required when the active flutter-suppression system is used.

Abel, I.↗

A maximum likelihood convolutional decoder model vs experimental data comparison

This article describes the comparison of a maximum likelihood convolutional decoder (MCD) prediction model and the actual performance of the MCD at the Madrid Deep Space Station. The MCD prediction model is used to develop a subroutine that has been utilized by the Telemetry Analysis Program (TAP) to compute the MCD bit error rate for a given signal-to-noise ratio. The results indicate that that the TAP can predict quite well compared to the experimental measurements. An optimal modulation index also can be found through TAP.

Chen, R. Y.↗

Comparison of surface and satellite gravity data

Satellite derived potential coefficients (GEM 9) are compared to terrestrial gravity data by degree in terms of coefficient differences and in terms of mean anomaly differences. The root mean square undulation difference (to degree 20) was 9 + or - m and the anomaly difference was + or - 7 mgals with GEM 9 commission errors of + or - 1.7 m and + or - 3.8 mgals. The standard deviations of the GEM 9 implied undulations increased from + or - 4 cm at degree 2 to + or - 53 cm at degree 20. The corresponding values implied by a recent (June 1978) terrestrial 5 deg field were + or - 2.53 m and + or - 0.38 m (at degree 20). Comparisons between Geos-3 altimeter derived anomalies and 1 deg X 1 Deg terrestrial data showed that + or - 6-8 mgals is a reasonable accuracy estimate for the altimeter derived anomalies. Anomalies derived from satellite to satellite tracking data indicate an accuracy of about + or - 6 mgals for the recovery of 5 deg equal area blocks.

Rapp, R. H.↗

The NASA-Ames Research Center stratospheric aerosol model. 2. Sensitivity studies and comparison with observatories

Sensitivity tests were performed on a one-dimensional, physical-chemical model of the unperturbed stratospheric aerosols, and model calculations were compared with observations. The tests and comparisons suggest that coagulation controls the particle number mixing ratio, although the number of condensation nuclei at the tropopause and the diffusion coefficient at high altitudes are also important. The sulfur gas source strength and the aerosol residence time are much more important than the supply of condensation nuclei in establishing mass and large particle concentrations. The particle size is also controlled mainly by gas supply and residence time. In situ observations of the aerosols and laboratory measurements of aerosols, parameters that can provide further information about the physics and chemistry of the stratosphere and the aerosols found there are provided.

Toon, O. B.↗

A comparison of measured and calculated upwelling radiance over water as a function of sensor altitude

A comparison is made between remote sensing data measured over water at altitudes ranging from 30 m to 15.2 km and data calculated for corresponding altitudes using surface measurements and an atmospheric radiative transfer model. Data were acquired on June 22, 1978 in Lake Erie, a cloudless, calm, near haze free day. Suspended solids and chlorophyll concentrations were 0.59 + or - 0.02 mg/1 and 2.42 + or - 0.03 micrograms/1 respectively throughout the duration of the experiment. Remote sensor data were acquired by two multispectral scanners each having 10 bands between 410 nm and 1040 nm. Calculated and measured nadir radiances for altitudes of 152 m and 12.5 km agree to within 16% and 14% respectively. The variation in measured radiance with look angle was poorly simulated by the model. It was concluded that an accurate assessment of the source of error will require the inclusion in the analysis of the contributions made by the sea state and specular sky reflectance.

Coney, T. A.↗

Preliminary comparison of theory and experiment for a conical, pressurized-fluidized-bed coal combustor

A published model was used for a comparison of theory with an actual combustor burning caking bituminous coal and using limestone to reduce sulfur dioxide emission. Theoretical bed pressure drop was in good agreement with experiment. The burnable carbon elutriated was not in agreement with experiment, at least partly because the exhaust port was apparently below the transport disengaging height. The observed nitrogen oxides emission rate was about half the theoretical value. There was order-or-magnitude agreement of sulfur dioxide emission rates.

Patch, R. W.↗

A comparison of simulated and experimental wave spectra in the nearshore region

The results of comparing the experimental spectra measured over the shelf with spectra measured in deepwater conditions indicated that statistically significant changes occurred over the shelf region that could be attributed to shoaling and refraction effects. The comparison of the simulated spectra with the experimental agreed well at the 80% confidence level for all but the most inshore data segment. The total energy also showed similar agreement. However, the theoretical frequency at which peak spectral density occurred did not follow the decreasing trend seen in the experimental data. Guidelines are proposed for determining the type wavefield to which the modeling technique can best be applied, and caution is given on the selection of the digitization rate necessary to ensure sufficient detail for analysis of wave data.

Morris, W. D.↗

A comparison of predictions obtained from wind tunnel tests and the results from cruising flight: Airbus and Concorde

Following a summary of the methods used to establish aerodynamic data and propulsion data, a comparison was made in the form of the drag (or thrust) difference between flight results and predictions made on the basis of these data. Certain hypothesis and improvements on aerodynamic data were presented in order to explain the slight deficit found on Airbus and Concorde.

Berger, J.↗

A comparison of photointerpretive and digital production methods for four key remote sensing-based information products

This paper evaluates the costs of producing four remote sensing-based information products: timber volume estimate tables, Level II land use/land cover maps, soil maps, and vegetative cover maps. Two production methods for each product are evaluated, one is based on digital processing of satellite data, and the other on conventional photointerpretation of aircraft data. For each product, a comparison is conducted of the two strategies' production costs (including data acquisition, 'ground truthing', interpretation, compilation, and printing charges) and their performance (as measured by accuracy and timeliness). Each of the production methods reviewed has been demonstrated - either operationally or experimentally - and the costs, timeliness and other performance estimates presented are based on observations made in practice. The results show that for these products, satellite-based production results in significant cost and timeliness improvements at the cost of a loss in accuracy.

Eastwood, L. F., Jr.↗