Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “CALCINATION”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,333 records · Page 74

Synthesis of Yttrium Oxide Particles for Interfacial Water Radiolysis Studies

Radiolysis of water produces hydrogen gas (H2), posing safety issues for nuclear reactors. Metal oxides can impact H2 formation when water is present on metal oxide surfaces. This presentation focuses on the development of a controllable synthesis of spherical yttrium oxide (Y2O3), that later will be tested for H2 production in water radiolysis. Y2O3 was synthesized via hydrothermal hydrolysis precipitation to form yttrium hydroxide (Y(OH)3), followed by high temperature decomposition to form Y2O3. Various synthesis conditions were tested to determine their impact on particle morphology including reaction time, cooling rate, reactant concentration, and inert atmospheres. Through short reaction times and rapid cooling rate, spherical, relatively uniform particles of 350 nm were obtained. Despite inert atmospheres, carbonate formation occurred in all particles. A calcination temperature of 800°C is necessary to remove impurities. Future work will aim to reduce carbonate formation and improve particle uniformity. The synthetic procedure will be translated to other metal ions to study their impact on interfacial radiolysis.

08 - HYDROGEN↗

Controlled Assembly of Hetero-Binuclear Sites on Mesoporous Silica: Visible Light Charge-Transfer Units With Selectable Redox Properties

Mild synthetic methods are demonstrated for the selective assembly of oxo-bridged heterobinuclear units of the type TiOCr{sup III}, TiOCO{sup II}, and TiOCe{sup III} on mesoporous silica support MCM-41. One method takes advantage of the higher acidity and, hence, higher reactivity of titanol compared to silanol OH groups toward Ce{sup III} or CO{sup II} precursors. The procedure avoids the customary use of a strong base. The controlled assembly of the TiOCr system exploits the selective redox reactivity of one metal toward another (Ti{sup III} precursor reacting with anchored Cr{sup VI} centers). The observed selectivity for linking a metal precursor to an already anchored partner versus formation of isolated centers ranges from a factor of 6 (TiOCe) to complete (TiOCr, TiOCo). Evidence for oxo bridges and determination of the coordination environment of each metal center is based on K-edge extended X-ray absorption fine structure spectroscopy (TiOCr), L-edge absorption spectroscopy (Ce), and X-ray absorption near edge structure measurements (Co, Cr). Electron paramagnetic resonance, optical, Fourier transform Raman, and Fourier transform infrared spectroscopy furnish additional details on oxidation state and coordination environment of donor and acceptor metal centers. In the case of TiOCr, the integrity of the anchored group upon calcination (350 C) and cycling of the Cr oxidation state is demonstrated. The binuclear units possess metal-to-metal charge-transfer transitions that absorb deep in the visible region. The flexible synthetic method for assembling the units opens up the use of visible light charge-transfer pumps featuring donor or acceptor metals with selectable redox potential.

36 MATERIALS SCIENCE↗

DEVELOPMENT OF GLASS COMPOSITIONS TO IMMOBILIZE ALKALI, ALKALINE EARTH, LANTHANIDE AND TRANSITION METAL FISSION PRODUCTS FROM NUCLEAR FUEL REPROCESSING

The Advanced Fuel Cycle Initiative (AFCI) waste management strategy revolves around specific treatment of individual or groups of separated waste streams. A goal for the separations processes is to efficiently manage the waste to be dispositioned as high level radioactive waste. The Advanced Fuel Cycle Initiative (AFCI) baseline technology for immobilization of the lanthanide (Ln) and transition metal fission product (TM) wastes is vitrification into a borosilicate glass. A current interest is to evaluate the feasibility of vitrifying combined waste streams to most cost effectively immobilize the wastes resulting from aqueous fuel reprocessing. Studies showed that high waste loadings are achievable for the Ln only (Option 1) stream. Waste loadings in excess of 60 wt % (on a calcined oxide basis) were demonstrated via a lanthanide borosilicate (LaBS) glass. The resulting glasses had excellent relative durability as determined by the Product Consistency Test (PCT). For a combined Ln and TM waste stream glass (Option 2), noble metal solubility was found to limit waste loading. However, the measured PCT normalized elemental releases for this glass were at least an order of magnitude below that of Environmental Assessment (EA) glass. Current efforts to evaluate the feasibility of vitrifying combined Ln, TM, alkali (Cs is the primary radionuclide of concern) and alkaline earth (Sr is the primary radionuclide of concern) wastes (Option 3) have shown that these approaches are feasible. However, waste loading limitations with respect to heat load (Cs/Sr loading), molybdenum solubility and/or noble metal solubility will likely be realized and must be considered in determining the cost effectiveness of these approaches.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Evolution of Gold Structure During Thermal Treatment of Au/FeOx Catalysts Revealed by Aberration-Corrected Electron Microscopy

High-resolution aberration-corrected electron microscopy was performed on a series of catalysts derived from a parent material, 2 at.% Au/Fe{sub 2}O{sub 3} (WGC ref. no. 60C), prepared by co-precipitation and calcined in air at 400 C, and a catalyst prepared by leaching surface gold from the parent catalyst and exposed to various treatments, including use in the water-gas shift reaction at 250 C. Aberration-corrected JEOL 2200FS (JEOL USA, Peabody, MA) and Vacuum Generators HB-603U STEM instruments were used to image fresh, reduced, leached, used and re-oxidized catalyst samples. A new in situ heating technology (Protochips Inc., Raleigh, NC, USA), which permits full sub-Angstrom imaging resolution in the JEOL 2200FS was used to study the effects of temperature on the behavior of gold species. A remarkable stability of gold to redox treatments up to 400 C, with atomic gold decorating step surfaces of iron oxide was identified. On heating the samples in vacuum to 700 C, it was found that monodispersed gold began to sinter to form nanoparticles above 500 C. Gold species internal to the iron oxide support material was shown to diffuse to the surface at elevated temperature, coalescing into discrete nanocrystals. The results demonstrate the value of in situ heating for understanding morphological changes in the catalyst with elevated temperature treatments.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Template Synthesis of Nanostructured Metals using Cellulose Nanocrystal

In this chapter, cellulose nanocrystal (CNXL) has been used as a template and reducing agent for synthesizing nanoscale inorganic solids such as metal oxide, metal carbide, and nanocrystalline metals. CNXL selectively nucleates metal or metal oxide phases in ordered arrangements commensurate with the attendant structure and chemistry of the fiber. The reaction has an analogy to the well-known Tollen’s reagent where addition of an aldehyde or glucose analyte to a glass vessel containing a soluble ammoniacal silver complex causes reduction of the silver to form a mirror on the vessel surface. For the synthesis of TiO2, CNXL produced mesoporous anatase with 5-10 nm particle sizes and 170-200 m2/g surface area after air-calcination. Silica-infiltrated CNXL produced very homogeneous SiC nanowires with 70 nm in diameter at 1400 oC in Ar. For the syntheses of metal nanoparticles, upon addition of aqueous metal ion containing solutions (Cu(II), Ni(II), Ag(I), Au(III), Pd(II), Pt(IV), or even selenite, Se(IV)) into the CNXL suspension, reduction to the metal occurs under hydrothermal conditions to form ordered metal nanostructures. Ni (II) and Cu(II) ions required high temperature (300-400 oC) to be reduced due to their low reduction potentials. However, metal ions including Ag(I), Au(III), Pt(IV), Pd(II), Se(IV) needed lower temperatures (160-200 oC) to be reduced. Enhanced catalytic activity on these templated surfaces has been demonstrated for a methylene-blue dye photo-induced decomposition (Se nanocrystals resident on crystalline cellulose).

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Formation and Detriments of Residual Alkaline Compounds on High-Nickel Layered Oxide Cathodes

High-nickel layered oxides LiNi x M 1-x O 2 (x ≥ 0.9) have emerged as promising cathode materials for automotive batteries due to their high energy density and lower cost. However, the formation and accumulation of surface alkaline compounds during storage hinder their mass production and commercialization. Here, in this study, a validated chemical method is employed to deconvolute and quantify the evolution of each residual lithium compound in four representative cathodes during ambient-air storage, viz., LiNiO 2 (LNO), LiNi 0.95 Co 0.05 O 2 (NC), LiNi 0.95 Mn 0.05 O 2 (NM), and LiNi 0.95 Al 0.05 O 2 (NA). Furthermore, the activation energy of the reaction between water and the cathode is determined by measuring the leached LiOH concentration at various temperatures. While residual lithium and time-of-flight secondary-ion mass spectrometry measurements collectively reveal that the air stability overall follows the trend of NM > NA ≈ NC > LNO, the aged NM exhibits the highest charge-transfer resistance and the worst electrochemical performance among the cathodes. In situ, X-ray diffraction and scanning transmission electron microscopy unveil that the aged NM is plagued by a large area of resistive spinel-like M 3–x Li x O 4 phases, leading to aggravated particle reaction heterogeneity. Finally, a one-step recalcination method is demonstrated effective in fully restoring the degraded cathodes. This work provides insights into overcoming air sensitivity issues of high-Ni cathodes.

(S)TEM↗

Nanofabrication with Metallopolymers: Recent Developments and Future Perspectives

We found that synthetic polymers containing metals and metal centers have experienced rapid growth in the last two decades. Metal-containing polymers and these have an unprecedented role to play in modern high-tech applications including nanomanufacturing, sensing, separation and catalysis. Advancement in synthetic strategies for macromolecules has enabled the synthesis of novel, exotic and use-inspired metallopolymers. Using state-of-the-art design strategies, it is now possible to perform targeted synthesis of macromolecules with varied complexity that contain a range of metal centers either in the backbone or in the side chains of the organic moiety. Moreover, the presence of an inorganic element (metals and metal centers) in organic moieties has led to a number of new physicochemical properties while implementing novel functionality to the polymer matrix. This review covers nanotechnology influenced by distinctive features of metal-containing macromolecular systems, particularly in developing flexible, functional materials.

36 MATERIALS SCIENCE↗

Probing the thermal decomposition of plutonium (III) oxalate with IR and Raman spectroscopy, X-ray diffraction, and electron microscopy

The thermal decomposition of Pu(III) oxalate was analyzed by Raman microspectroscopy, infrared spectroscopy, scanning electron microscopy, and powder X-ray diffraction. These data show that crystalline Pu 2 (C 2 O 4 ) 3 •9H 2 O progressively loses water and oxalate ligands as it is heated, which leads to a decrease in long-range lattice ordering, though minimal changes are observed in gross crystalline morphology. The onset of PuO 2 formation was observed between 200 - 250 °C. Thermal decomposition of oxalate ligands leads to the formation of CO 2 and plutonium oxalate-carbonate moieties, which had not been observed in previously published thermogravimetric measurements of Pu(III) oxalate. Formation of plutonium oxalate-carbonate moieties is believed to be associated with a change in the plutonium oxidation state from 3+ to 4+, which occurs prior to PuO 2 formation. The data provided herein demonstrate the rich spectroscopic nature of a rather underexplored, and technologically relevant, plutonium system. Ideally these results will further future investigations into the Pu(III) oxalate system both experimentally and computationally.

36 MATERIALS SCIENCE↗

Comparative study of the synthesis of layered transition metal molybdates

Mixed metal oxides (MMOs) prepared by the mild thermal decomposition of layered double hydroxides (LDHs) differ in their reactivity on exposure to aqueous molybdate containing solutions. In this study, we investigate the reactivity of some T-Al containing MMOs (T=Co, Ni, Cu or Zn) towards the formation of layered transition metal molybdates (LTMs) possessing the general formula AT{sub 2}(OH)(MoO{sub 4}){sub 2}.H{sub 2}O, where A=NH{sub 4}{sup +}, Na{sup +} or K{sup +}. The phase selectivity of the reaction was studied with respect to the source of molybdate, the ratio of T to Mo and the reaction pH. LTMs were obtained on reaction of Cu-Al and Zn-Al containing MMOs with aqueous solutions of ammonium heptamolybdate. Rehydration of these oxides in the presence of sodium or potassium molybdate yielded a rehydrated LDH phase as the only crystalline product. The LTM products obtained by the rehydration of MMO precursors were compared with LTMs prepared by direct precipitation from the metal salts in order to study the influence of preparative route on their chemical and physical properties. Differences were noted in the composition, morphology and thermal properties of the resulting products. - Graphical abstract: Mixed metal oxides (MMOs) derived from layered double hydroxide precursors differ in their reactivity on exposure to aqueous molybdate containing solutions. We investigate the influence of the molybdate source, the rehydration pH and the ratio of T/Mo on the reactivity of some T-Al containing MMOs (T=Co, Ni, Cu or Zn) towards the formation of layered transition metal molybdates of general formula AT{sub 2}(OH)(MoO{sub 4}){sub 2}.H{sub 2}O (where A{sup +}=NH{sub 4}{sup +}, K{sup +} or Na{sup +}).

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Strong blue and white photoluminescence emission of BaZrO{sub 3} undoped and lanthanide doped phosphor for light emitting diodes application

In this paper, we report the obtained strong broadband blue photoluminescence (PL) emission centered at 427 nm for undoped BaZrO{sub 3} observed after 266 nm excitation of submicron crystals prepared by hydrothermal/calcinations method. This emission is enhanced with the introduction of Tm{sup 3+} ions and is stronger than the characteristic PL blue emission of such lanthanide. The proposed mechanism of relaxation for host lattice emission is based on the presence of oxygen vacancies produced during the synthesis process and the charge compensation due to the difference in the electron valence between dopant and substituted ion in the host. Brilliant white light emission with a color coordinate of (x=0.29, y=0.32) was observed by combining the blue PL emission from the host with the green and red PL emission from Tb{sup 3+} and Eu{sup 3+} ions, respectively. The color coordinate can be tuned by changing the ratio between blue, green and red band by changing the concentration of lanthanides. - Graphical abstract: Strong blue emission from undoped BaZrO{sub 3} phosphor and white light emission by doping with Tb{sup 3+} (green) and Eu{sup 3+} (red) after 266 nm excitation. Highlights: Black-Right-Pointing-Pointer Blue emission from BaZrO{sub 3} phosphor. Black-Right-Pointing-Pointer Blue emission enhanced with Tm{sup 3+}. Black-Right-Pointing-Pointer White light from BaZrO{sup 3+} phosphor.

36 MATERIALS SCIENCE↗

The study of aluminum loss and consequent phase transformation in heat-treated acid-leached kaolin

This study investigates the effect of Al leaching during Fe removal from kaolin to mullite. Heat-treated kaolin was obtained by heating natural kaolin at 400, 500, 600, 700, 800 and 900 deg. C. The heat-treated kaolin was then leached at 100 deg. C with 4 M, 3 M, 2 M, 1 M, 0.2 M solution of H{sub 2}SO{sub 4} and 0.2 M solution of oxalic acid. The dried samples were sintered to 1300 deg. C for 4 h at a heating rate of 10 deg. C min{sup -1}. X-ray diffractometry and differential thermal analysis were used to study the phase transformation of kaolin to mullite. It was found that 700 deg. C is the optimum preheat-treatment temperature to leach out Fe and also Al for both types of the acids used. The majority of the 4 M sulfuric acid-treated kaolins formed the cristobalite phase when sintered. On the other hand, 1 M, 0.2 M sulfuric acid and 0.2 M oxalic acid leached heat-treated kaolin formed mullite and quartz phase after sintering. - Research Highlights: {yields} Preheat-treatment of kaolin improves the leachability of unwanted iron. {yields} The optimum preheat-treatment temperature is 700 deg. C. {yields} Sintered 4 M sulfuric acid-treated kaolin majorly formed the cristobalite phase. {yields} Sintered 0.2 M oxalic acid-treated kaolin formed lesser amorphous silicate phase.

36 MATERIALS SCIENCE↗

Magnetic force microscopy study of domain walls in Co{sub 2}Z ferrite

Graphical abstract: - Highlights: • Hexaferrite Co{sub 2}Z is synthesized through the modified Pechini method. • Magnetic domains are observed in anisotropic Co{sub 2}Z single grain using MFM. • Observed single grain domain thickness is in good agreement with Dotsh model. - Abstract: Hexaferrite Co{sub 2}Z was synthesized through the modified Pechini method. Partially oriented samples were obtained after consolidation with uniaxial pressing and calcination/sintering at 1300 °C/1330 °C. The sample composition and morphology was identified with X-ray diffractometry (XRD) and scanning electron microscopy (SEM) with energy-dispersive X-ray spectrometry (EDS). MFM studies of the single grains revealed a domain structure with 0.7 μm wide. The Co{sub 2}Z static magnetization was measured with a vibrating sample magnetometer (VSM), and was used to calculate a single grain domain with a thickness of 4.8 μm. This result is in good agreement with SEM observations of the single grain thickness.

36 MATERIALS SCIENCE↗

Long-term calcination/carbonation cycling and thermal pretreatment for CO{sub 2} capture by limestone and dolomite

Capturing carbon dioxide is vital for the future of climate-friendly combustion, gasification, and steam-re-forming processes. Dry processes utilizing simple sorbents have great potential in this regard. Long-term calcination/carbonation cycling was carried out in an atmospheric-pressure thermogravimetric reactor. Although dolomite gave better capture than limestone for a limited number of cycles, the advantage declined over many cycles. Under some circumstances, decreasing the carbonation temperature increased the rate of reaction because of the interaction between equilibrium and kinetic factors. Limestone and dolomite, after being pretreated thermally at high temperatures (1000 or 1100{sup o}C), showed a substantial increase in calcium utilization over many calcination/carbonation cycles. Lengthening the pretreatment interval resulted in greater improvement. However, attrition was significantly greater for the pretreated sorbents. Greatly extending the duration of carbonation during one cycle was found to be capable of restoring the CO{sub 2} capture ability of sorbents to their original behavior, offering a possible means of countering the long-term degradation of calcium sorbents for dry capture of carbon dioxide. 12 refs., 12 figs., 2 tabs.

01 COAL, LIGNITE, AND PEAT↗

Carbon dioxide sequestration in cement kiln dust through mineral carbonation

Carbon sequestration through the formation of carbonates is a potential means to reduce CO{sub 2} emissions. Alkaline industrial solid wastes typically have high mass fractions of reactive oxides that may not require preprocessing, making them an attractive source material for mineral carbonation. The degree of mineral carbonation achievable in cement kiln dust (CKD) under ambient temperatures and pressures was examined through a series of batch and column experiments. The overall extent and potential mechanisms and rate behavior of the carbonation process were assessed through a complementary set of analytical and empirical methods, including mass change, thermal analysis, and X-ray diffraction. The carbonation reactions were carried out primarily through the reaction of CO{sub 2} with Ca(OH){sub 2}, and CaCO{sub 3} was observed as the predominant carbonation product. A sequestration extent of over 60% was observed within 8 h of reaction without any modifications to the waste. Sequestration appears to follow unreacted core model theory where reaction kinetics are controlled by a first-order rate constant at early times; however, as carbonation progresses, the kinetics of the reaction are attenuated by the extent of the reaction due to diffusion control, with the extent of conversion never reaching completion. 35 refs., 3 figs., 1 tab.

01 COAL, LIGNITE, AND PEAT↗

Model for cradle-to-gate life cycle assessment of clinker production

A model for input- and technology-dependent cradle-to-gate life cycle assessments (LCA) was constructed to quantify emissions and resource consumption of various clinker production options. The model was compiled using data of more than 100 clinker production lines and complemented with literature data and best judgment from experts. It can be applied by the cement industry for the selection of alternative fuels and raw materials (AFR) and by authorities for decision-support regarding the permission of waste co-processing in cement kilns. In the field of sustainable construction, the model can be used to compare clinker production options. Two case studies are presented. First, co-processing of four different types of waste is analyzed at a modern precalciner kiln system. Second, clinker production is compared between five kiln systems. Results show that the use of waste (tires, prepared industrial waste, dried sewage sludge, blast furnace slag) led to reduced greenhouse gas emissions, decreased resource consumption, and mostly to reduced aggregated environmental impacts. Regarding the different kiln systems, the environmental impact generally increased with decreasing energy efficiency. 35 refs., 2 figs., 2 tabs.

01 COAL, LIGNITE, AND PEAT↗

Long-term behavior of CaO-based pellets supported by calcium aluminate cements in a long series of CO{sub 2} capture cycles

A series of carbonation/calcination tests consisting of 1000 cycles was performed with CaO-based pellets prepared using hydrated lime and calcium aluminate cement. The change in CO{sub 2} carrying capacity of the sorbent was investigated in a thermogravimetric analyzer (TGA) apparatus and the morphology of residues after those cycles in the TGA was examined by scanning electron microscopy (SEM). Larger quantities of sorbent pellets underwent 300 carbonation/calcination cycles in a tube furnace (TF), and their properties were examined by nitrogen physisorption tests (BET and BJH). The crushing strength of the pellets before and after the CO{sub 2} cycles was determined by means of a custom-made strength testing apparatus. The results showed high CO{sub 2} carrying capacity in long series of cycles with an extremely high residual activity of the order of 28%. This superior performance is a result of favorable morphology due to the existence of large numbers of nanosized pores suitable for carbonation. This morphology is relatively stable during cycles due to the presence of mayenite (Ca{sub 12}Al{sub 14}O{sub 33}) in the CaO structure. However, the crushing tests showed that pellets lost strength after 300 carbonation/calcination cycles, and this appears to be due to the cracks formed in the pellets. This effect was not observed in smaller particles suitable for use in fluidized bed (FBC) systems.

01 COAL, LIGNITE, AND PEAT↗