Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Boronization”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,333 records · Page 74

Criticality control of a high-performance soluble-boron-free small modular reactor core

The pursuit for a soluble-boron-free (SBF) PWR core has been on-going for more than three decades. It is known that feasibility of such a design is generally higher as the core power (hence core size) is reduced. It is upon this observation that a new approach for an SBF small modular reactor (SMR) core was recently proposed. This paper aims to present criticality control management of the said investigation. All calculations in this study were completed using the 2-step Serpent /Coredax reactor analysis with ENDF/B-7.1 nuclear data library. (authors)

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

Effects of Boron and Graphite Uncertainty in Fuel for TREAT Simulations

As a result of the accident at Fukushima, the United States has made a concerted effort to develop fuel with enhanced accident tolerance for the current fleet of reactors. In 2012 Congress laid out a schedule for the development of accident tolerant fuel (ATF), the goal of which is to test in a commercial reactor by 2022. Idaho National Lab's (INL) Transient Reactor Test Facility (TREAT) is one of the locations that will be performing ATF testing and is scheduled for restart in 2018. TREAT was built to subject fuel to conditions ranging from mild transients to severe reactor accidents. However, typically a number of pre-test calibrations are required before evaluation of fuel can begin, which is costly and time consuming. Advanced modeling techniques and current computational capacity make full core TREAT simulations possible, with the goal of such simulations to understand the pre-test core and minimize the number of required calibrations. But, in order to simulate TREAT with a high degree of precision the reactor materials and geometry must also be modeled with a high degree of precision. This paper examines how uncertainty in the reported values of boron and graphite have an effect on simulations of TREAT.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Non-Destructive Plutonium Assay in Pyroprocessing Bulk Materials with a 3D Boron-Coated-Straw Detector Array

Assessment of plutonium content through all the processing steps is needed and is a challenging task. While several destructive assay methods have been developed for nuclear material accountability, a nondestructive assay (NDA) system for the assessment of plutonium in bulk materials is still needed. This system should withstand pyroprocessing harsh environments and have consistent sensitivity and accuracy despite different fuel form factors. We aim to enable the accurate assessment of the plutonium content of nuclear material during pyroprocessing to improve the separation process and enhance its proliferation resistance. We plan to achieve this goal by developing and demonstrating a new 3D boron-coated-straw neutron detector array (3D-BCSDA) with high efficiency and spatial resolution.

11 - NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Growth and Isolation of Large Area Boron-Doped Nanocrystalline Diamond Sheets: A Route toward Diamond-on-Graphene Heterojunction

Many material device applications would benefit from thin diamond coatings, but current growth techniques, such as chemical vapor deposition (CVD) or atomic layer deposition require high substrate and gas-phase temperatures that would destroy the device being coated. The development of freestanding, thin boron-doped diamond nanosheets grown on tantalum foil substrates via microwave plasma-assisted CVD is reported. These diamond sheets (measuring up to 4 × 5 mm in planar area, and 300–600 nm in thickness) are removed from the substrate using mechanical exfoliation and then transferred to other substrates, including Si/SiO 2 and graphene. The electronic properties of the resulting diamond nanosheets and their dependence on the free-standing growth, the mechanical exfoliation and transfer processes, and ultimately on their composition are characterized. To support this, a prototypical diamond nanosheet–graphene field effect transistor-like (DNGfet) device is developed and its electronic transport properties are studied as a function of temperature. The resulting DNGfet device exhibits thermally activated transport (thermionic conductance) above 50 K. Below 50 K a transition to variable range hopping is observed. Finally, these findings demonstrate the first step towards a low-temperature diamond-based transistor.

36 MATERIALS SCIENCE↗

Ion-Conductive, Viscosity-Tunable Hexagonal Boron Nitride Nanosheet Inks

Liquid-phase exfoliation of layered solids holds promise for the scalable production of 2D nanosheets. When combined with suitable solvents and stabilizing polymers, the rheology of the resulting nanosheet dispersions can be tuned for a variety of additive manufacturing methods. While significant progress is made in the development of electrically conductive nanosheet inks, minimal effort is applied to ion-conductive nanosheet inks despite their central role in energy storage applications. In this work, the formulation of viscosity-tunable hexagonal boron nitride (hBN) inks compatible with a wide range of printing methods that span the spectrum from low-viscosity inkjet printing to high-viscosity blade coating is demonstrated. The inks are prepared by liquid-phase exfoliation with ethyl cellulose as the polymer dispersant and stabilizer. Thermal annealing of the printed structures volatilizes the polymer, resulting in a porous microstructure and the formation of a nanoscale carbonaceous coating on the hBN nanosheets, which promotes high wettability to battery electrolytes. The final result is a printed hBN nanosheet film that possesses high ionic conductivity, chemical and thermal stability, and electrically insulating character, which are ideal characteristics for printable battery components such as separators. Indeed, lithium-ion battery cells based on printed hBN separators reveal enhanced electrochemical performance that exceeds commercial polymer separators.

36 MATERIALS SCIENCE↗

Modulating Electronic Structure of Atomically Dispersed Nickel Sites through Boron and Nitrogen Dual Coordination Boosts Oxygen Reduction

Abstract Atomically dispersed 3D transitional metal active sites with nitrogen coordination anchored on carbon support have emerged as a kind of promising electrocatalyst toward oxygen reduction reaction (ORR) in the field of fuel cells and metal–air cells. However, it is still a challenge to accurately modulate the coordination structure of single‐atom metal sites, especially first‐shell coordination, as well as identify the relationship between the geometric/electronic structure and ORR performance. Herein, a carbon‐supported single‐atom nickel catalyst is fabricated with boron and nitrogen dual coordination (denoted as Ni‐B/N‐C). The hard X‐ray absorption spectrum result reveals that atomically dispersed Ni active sites are coordinated with one B atom and three N atoms in the first shell (denoted as Ni‐B 1 N 3 ). The Ni‐B/N‐C catalyst exhibits a half‐wave potential ( E 1/2 ) of 0.87 V versus RHE, along with a distinguished long‐term durability in alkaline media, which is superior to commercial Pt/C. Density functional theory calculations indicate that the Ni‐B 1 N 3 active sites are more favorable for the adsorption of ORR intermediates relative to Ni‐N 4 , leading to the reduction of thermodynamic barrier and the acceleration of reaction kinetics, which accounts for the increased intrinsic activity.

Chemistry↗

Boron‐Doped Nano‐Crystalline Coated Carbon Fibers for Phasic Dopamine Sensing

Real time, chronic electrochemical detection of neurotransmitters will provide a positive step in the treatment and understanding of neurological disease. However, current electrodes using carbon fibers (CF) fail to perform chronically. While diamond-based coatings show promise in improving their longevity, achieving a uniform layer of such coatings on CFs is challenging, and the electrodes often lose sensitivity after coating. In this work, a complete and uniform boron-doped nanocrystalline material grown in a diamond reactor (B-NCD) was developed to coat CF microelectrodes for neurochemical sensing. The coating was characterized electrically, optically, mechanically, and chemically. The B-NCD coated CF electrodes were able to detect phasic dopamine at a sensitivity comparable to the most widely used alternatives (uncoated and PEDOT:Nafion coated CFs). During biofouling testing, the B-NCD coated CF electrodes demonstrated better stability than uncoated CFs and comparable performance to PEDOT:Nafion coated CFs. Moreover, B-NCD exhibited no signs of degradation during consecutive FSCV applications, while uncoated and PEDOT:Nafion coated CF electrodes degraded significantly over time. Furthermore, the B-NCD coating supported the survival and development of neurons and astrocytes in vitro, exhibited excellent adhesion and durability during mechanical bending testing, and enabled successful in vivo recording of phasic dopamine release in the rat brain. Overall, B-NCD coated CFs present as an ideal candidate for chronic, flexible neural implantable electrodes for long-term neurochemical monitoring.

carbon fiber↗

Aligned van der Waals Coupled Growth of Carbon Nanotubes to Hexagonal Boron Nitride

Abstract 1D carbon nanotubes (CNTs) are grown on hexagonal boron nitride (hBN) surfaces. The nanotubes show clear preference to align to specific crystal directions of the hBN substrate. Raman spectra confirm that the nanotubes consist of sp 2 carbon, while nanomanipulation shows that they are van der Waals coupled to the underlying hBN substrate. Scanning conductance and electric force microscopy show that the CNTs have significantly greater electrical conductance compared to the hBN. This integrated aligned growth of materials with similar lattices, yet having dissimilar dimensionality and electrical conducting properties, provides a promising route to achieving intricate nanoscale electrical circuits on high‐quality insulating substrates.

Nasseri, Mohsen↗

Enantioselective Kinetic Resolution/Desymmetrization of Para</em-Quinols: A Case Study in Boronic-Acid-Directed Phosphoric Acid Catalysis

A chiral phosphoric acid-catalyzed kinetic resolution and desymmetrization of para-quinols operating via oxa-Michael addition was developed and subsequently subjected to mechanistic study. Good to excellent s-factors/enantioselectivities were obtained over a broad range of substrates. Kinetic studies were performed, and DFT studies favor a hydrogen bonding activation mode. The mechanistic studies provide insights to previously reported chiral anion phase transfer reactions involving chiral phosphate catalysts in combination with boronic acids.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Construction of a Nanoporous Highly Crystalline Hexagonal Boron Nitride from an Amorphous Precursor for Catalytic Dehydrogenation

Abstract Hexagonal boron nitride (h‐BN) is regarded as a graphene analogue and exhibits important characteristics and vast application potentials. However, discovering a facile method for the preparation of nanoporous crystalline h‐BN nanosheets (h‐BNNS) is still a challenge. Herein, a novel and simple route for the conversion of amorphous h‐BN precursors into highly crystalline h‐BNNS was achieved through a successive dissolution–precipitation/crystallization process in the presence of magnesium. The h‐BNNS has high crystallinity, high porosity with a surface area of 347 m 2 g −1 , high purity, and enhanced thermal stability. Improved catalytic performance of crystalline h‐BNNS was evidenced by its much higher catalytic efficiency in the dehydrogenation of dodecahydro‐N‐ethylcarbazole, compared with its amorphous h‐BN precursor, as well as other precious‐metal‐loaded heterogeneous catalysts.

Chen, Hao↗

Creating Frustrated Lewis Pairs in Defective Boron Carbon Nitride for Electrocatalytic Nitrogen Reduction to Ammonia

Abstract The electrocatalytic nitrogen reduction reaction (NRR) on metal‐free catalysts is an attractive alternative to the industrial Haber–Bosch process. However, the state‐of‐the‐art metal‐free electrocatalysts still suffer from low Faraday efficiencies and low ammonia yields. Herein, we present a molecular design strategy to develop a defective boron carbon nitride (BCN) catalyst with the abundant unsaturated B and N atoms as Lewis acid and base sites, which upgrades the catalyst from a single “Lewis acid catalysis” to “frustrated Lewis pairs (FLPs) catalysis.” 14 N 2 / 15 N 2 exchange experiments and density functional theory (DFT) calculations reveal that FLPs can adsorb an N 2 molecule to form a six‐membered ring intermediate, which enables the cleavage of N 2 via a pull–pull effect, thereby significantly reducing the energy barrier to −0.28 eV. Impressively, BCN achieves a high Faraday efficiency of 18.9 %, an ammonia yield of 20.9 μg h −1 mg −1 cat. , and long‐term durability.

Lin, Wenwen↗

Construction of a Nanoporous Highly Crystalline Hexagonal Boron Nitride from an Amorphous Precursor for Catalytic Dehydrogenation

Abstract Hexagonal boron nitride (h‐BN) is regarded as a graphene analogue and exhibits important characteristics and vast application potentials. However, discovering a facile method for the preparation of nanoporous crystalline h‐BN nanosheets (h‐BNNS) is still a challenge. Herein, a novel and simple route for the conversion of amorphous h‐BN precursors into highly crystalline h‐BNNS was achieved through a successive dissolution–precipitation/crystallization process in the presence of magnesium. The h‐BNNS has high crystallinity, high porosity with a surface area of 347 m 2 g −1 , high purity, and enhanced thermal stability. Improved catalytic performance of crystalline h‐BNNS was evidenced by its much higher catalytic efficiency in the dehydrogenation of dodecahydro‐N‐ethylcarbazole, compared with its amorphous h‐BN precursor, as well as other precious‐metal‐loaded heterogeneous catalysts.

Chen, Hao↗

Creating Frustrated Lewis Pairs in Defective Boron Carbon Nitride for Electrocatalytic Nitrogen Reduction to Ammonia

Abstract The electrocatalytic nitrogen reduction reaction (NRR) on metal‐free catalysts is an attractive alternative to the industrial Haber–Bosch process. However, the state‐of‐the‐art metal‐free electrocatalysts still suffer from low Faraday efficiencies and low ammonia yields. Herein, we present a molecular design strategy to develop a defective boron carbon nitride (BCN) catalyst with the abundant unsaturated B and N atoms as Lewis acid and base sites, which upgrades the catalyst from a single “Lewis acid catalysis” to “frustrated Lewis pairs (FLPs) catalysis.” 14 N 2 / 15 N 2 exchange experiments and density functional theory (DFT) calculations reveal that FLPs can adsorb an N 2 molecule to form a six‐membered ring intermediate, which enables the cleavage of N 2 via a pull–pull effect, thereby significantly reducing the energy barrier to −0.28 eV. Impressively, BCN achieves a high Faraday efficiency of 18.9 %, an ammonia yield of 20.9 μg h −1 mg −1 cat. , and long‐term durability.

Lin, Wenwen↗

Single Atoms Anchored in Hexagonal Boron Nitride for Propane Dehydrogenation from First Principles

We report single-atom catalysts embedded in N-doped graphene have attracted great interest recently, but the hexagonal boron nitride (h-BN) is much less explored as a support. Using first principles density function theory and molecular dynamics, here we investigate the stability of Pt, Au, and Ru single atoms anchored at B and N vacancies on h-BN. We find that Pt and Ru single atoms are much more stable than Au on h-BN. We further examine propane dehydrogenation on these single-atom catalysts and find that Pt 1 at the B vacancy in h-BN and Ru 1 at the N vacancy in h-BN show excellent activity for propane dehydrogenation, as evidenced by low energy barriers for both dehydrogenation steps. Our work suggests that Pt and Ru single atoms anchored at vacancy sites in h-BN could be promising for propane dehydrogenation.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Interrogating the Surface Intermediates and Water Oxidation Products of Boron‐Doped Diamond Electrodes with Scanning Electrochemical Microscopy

Abstract Boron‐doped diamond (BDD) electrodes are widely used in electrochemical sensing and water purification owing to their chemical and structural stability under harsh reaction conditions. Water oxidation at BDD electrodes is known to produce reactive oxygen species, but the discharged and surface chemistries involved in these processes have not been studied in depth. Here, we present scanning electrochemical microscopy (SECM) studies of electrogenerated intermediates and products formed on sp 2 carbon‐containing BDD electrodes that display stark differences in their reactivity as a function of electrolyte type and pH during water oxidation. The most reactive and abundant species discharged from the electrode were observed at pH 11 in sulfate electrolyte. With the surface interrogation mode of SECM, two kinetically distinct surface intermediates were clearly distinguished, with one forming two orders of magnitude faster than the other but displaying a slower desorption rate. The surface coverage of these species was estimated in the range of 4–7×10 −5 mol/cm 2 for the first, and 3–4.4×10 −5 mol/cm 2 for the second one. SECM imaging suggested that regions of increased product evolution have decreased electron transfer kinetics and limited surface sites for intermediate binding. This work establishes methods for studying highly reactive intermediates found in BDD and paves the way for the inspection of other interfaces where solvolysis impacts their reactivity and evolution.

Counihan, Michael J.↗

Boron Difluoride Curcuminoid Fluorophores with Enhanced Two-Photon Excited Fluorescence Emission and Versatile Living-Cell Imaging Properties

The synthesis of boron difluoride complexes of a series of curcuminoid derivatives containing various donor end groups is described in this paper. Time-dependent (TD)-DFT calculations confirm the charge-transfer character of the second lowest-energy transition band and ascribe the lowest energy band to a “cyanine-like” transition. Photophysical studies reveal that tuning the donor strength of the end groups allows covering a broad spectral range, from the visible to the NIR region, of the UV–visible absorption and fluorescence spectra. Two-photon-excited fluorescence and Z-scan techniques prove that an increase in the donor strength or in the rigidity of the backbone results in a considerable increase in the two-photon cross section, reaching 5000 GM, with predominant two-photon absorption from the S 0 –S 2 charge-transfer transition. Direct comparisons with the hemicurcuminoid derivatives show that the two-photon active band for the curcuminoid derivatives has the same intramolecular charge-transfer character and therefore arises from a dipolar structure. Overall, this structure–relationship study allows the optimization of the two-photon brightness (i.e., 400–900 GM) with one dye that emits in the NIR region of the spectrum. Finally, in addition, these dyes demonstrate high intracellular uptake efficiency in Cos7 cells with emission in the visible region, which is further improved by using porous silica nanoparticles as dye vehicles for the imaging of two mammalian carcinoma cells type based on NIR fluorescence emission.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Reversible Modification of the Structural and Electronic Properties of a Boron Nitride Monolayer by CO Intercalation

Abstract We demonstrate the reversible intercalation of CO between a hexagonal boron nitride (h‐BN) monolayer and a Rh(111) substrate above a threshold CO pressure of 0.01 mbar at room temperature. The intercalation of CO results in the flattening of the originally corrugated h‐BN nanomesh and an electronic decoupling of the BN layer from the Rh substrate. The intercalated CO molecules assume a coverage and adsorption site distribution comparable to that on the free Rh(111) surface at similar conditions. The pristine h‐BN nanomesh is reinstated upon heating to above 625 K. These observations may open up opportunities for a reversible tuning of the electronic and structural properties of monolayer BN films.

Ng, May Ling↗