SEARCH · Engineering Papers

Results for “Alerting”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,333 records · Page 74

All sources NASA NTRS DOE OSTI

NASA NTRSDate not supplied

Searching for GRB Counterparts to GW Events from the Third Gravitational Wave Observing Run with Fermi-GBM and Swift-BAT

We present Fermi Gamma-ray Burst Monitor (Fermi-GBM) and Swift Burst Alert Telescope (Swift-BAT) observations of gravitational-wave (GW) events detected during the third LIGO/Virgo/KAGRA Collaboration observing run (O3). Using Fermi-GBM on-board triggers as well as sub-threshold searches in both Fermi-GBM and Swift-BAT ground data, we search for coincident gamma-ray transients associated with the GW events. No new joint events were found. We therefore calculate flux upper limits for the associated gamma-ray luminosity of each GW event. Using the lack of electromagnetic (EM) emission from binary black hole (BBH) mergers, we begin to constrain theoretical models of any such emission.

GRB↗

NASA NTRS2023

Southeast U.S. Agriculture: Evaluating the Spatial and Temporal Distribution of Flash Droughts within Agricultural Areas and Regional Crop Calendars in the Southeast using Earth Observations

A flash drought refers to the rapid onset or intensification of drought-like conditions. Within the Southeastern United States, flash droughts are made worse by the presence of consumptive vegetation and poor water-holding soils. According to the United States Drought Monitor, a 2016 flash drought occurred with roughly 92% of Georgia, Alabama, Mississippi, and Tennessee experiencing “severe drought” or worse in the fall of that year. The event resulted in widespread wildfires, reservoir shortages that led to interstate disputes over water rights, significant deterioration of pasture and rangeland, and crop sale losses. The occurrence of a flash drought similar to that listed above can cost the Southeast hundreds of millions of dollars, with effects lasting for several years. For this reason, the development of flash drought monitoring, forecasting, and communication tools is needed to alert both states and their practitioners of possible flash drought events, offsetting the potential loss caused by a flash drought event. This research employed NASA's Short-Term Prediction and Transition Center-Land Information System, Landsat 7 Enhanced Thematic Mapper Plus, and Landsat 8 Operational Land Imager and other datasets to determine climatological trends during peak growing season from 2000-2022. These products can help partners at the Alabama Office of the State Climatologist, National Integrated Drought Information System, and National Coordinated Soil Moisture Monitoring Network better manage agricultural lands inside drought-prone zones and monitor crop sensitivity during different growing seasons.

Kindrea Gibbons↗

NASA NTRS2022

Interstellar Object Encounter Trade Space Exploration

2017 and 2019 saw the discovery of the first twointerstellar objects (ISO) in the solar system, 1I ‘Oumuamuaand 2I Borisov, but left scientists with more questions thananswers as to the objects’ origins. To fully resolve these openquestions, scientists need a closer look at an interstellar objectvia a dedicated spacecraft and close approach. However, ISOspose unique engineering challenges for close encounters becauseof their extremely high relative velocity, unfavorable approachgeometry, and limited alert time; ISOs often are only discovereda few months before a spacecraft would need to launch toencounter it.Typical encounters with small bodies have occurred at relativevelocities on the order of 10 km/s with approach phase below90 deg (at least half-lit). Except for the Halley Armada in the80s, the most extreme flybys have been of comet Borrelly ata relative velocity of 16.6 km/s (but only a phase angle of 65deg) and Annefrank at a phase angle of 150 deg (but a relativevelocity of only 7.2 km/s). Furthermore, planetary missionsgenerally target bodies whose ephemerides are well constrainedbecause of many years of Earth based observations. On theother hand, ISOs typically have relative velocities of 30-90 km/s,phase angles biased towards over 90 deg, and larger positionuncertainties because of shorter ground-based observationalarcs, and thus represent much more difficult targets.Our team has been developing the flight system architecturesand technologies necessary to enable future reconnaissance ofan interstellar object by flyby, potentially including an impactor.This endeavor seeks to catalyze planetary exploration and itsintersection with exo-planet science. We establish encounterguidance, navigation, and control requirements within the tradespace of trajectories to a synthetic ISO population. Flightsystem constraints, Earth departure capabilities, and ability fora mission team to quickly respond to an inbound target limitthe accessible space for a future mission. This trade spaceanalysis reveals enabling mission architectures, and providesrecommendations for supporting investment to enable an ISOmission in the next decade.

Farnocchia, Davide↗

NASA NTRS2014

Controllable Multi-Functional Heat Exchanger for Space Applications

Team Spacering will design SpaceRing, a cooling and waste heat recycling system that addresses NASA’s interest for a cooling and power-generating unit in its prototype deep space habitat[1]. The merits of this system are as follows: - Controllable cooling is critical in maintaining a habitable environment and in the functionality of life support systems, powering electronics and other devices in a spacecraft. - Power is expensive to produce in a space environment. Converting wasted thermal energy into electricity will save energy and money for the space station. Space habitation is a highly complex endeavor. Consequently, the SpaceRing must adhere to additional constraints, which include: - Lack of natural fluid or gas convection due to micro-gravity environment - Limited range for heat source and cold sink temperature - Subject to high fluctuations of incoming thermal energy - Minimal weight due to the high cost of transporting items into space After consulting with NASA and experts in thermal studies, several design objectives were identified and are listed below in order of importance: - High cooling capacity - Reliable safety control and alert system - Maximization of energy generation from wasted heat - Optimization of cooling capability and power generation - Long operational life and minimization of maintenance In space, conventional cooling systems utilize passive heat pipe systems for small-scale heat rejection and pumped pipes with heat exchangers for large-scale heat rejection. Thermal power generation in space is mainly achieved by using thermoelectric material that produces electric energy from temperature differentials. We propose a design that combines cooling and thermoelectric power generation. Using a hot pipe connected to a heat source, a cold pipe connected to a radiator, a heat exchanger in contact with both pipes, and a pump in each pipe to move the fluid, we make an active cooling system. The thermoelectric material is inserted in the heat exchanger between the hot and cold pipes to extract energy from the maximum temperature difference coming from the two pipes. It also provides controllable cooling capacity through the use of the thermoelectric material as cooling modules. We have tested our system under target heat source and sink conditions and measured the temperatures and flow rates. Our preliminary results are promising, demonstrating the output of 25 Watts of power on average. We are in the process of running control tests to compare the heat transfer performance without the thermoelectric generators, which is vital in determining whether or not the generators introduce an unacceptable amount of thermal resistance. While some control tests have been run already, the results have been noisy. We have modified our testing environment and data acquisition methods to allow for simple comparison between the control test results and thermoelectric performance results. Lastly, we have modified the heat exchanger design slightly to include acrylic baffles. This will allow the heat to flow through the heat exchanger more efficiently. We have presented our preliminary results to NASA and will deliver the final product by the end of May 2014.

Lee Xiong↗

NASA NTRSDate not supplied

Limitations on the Use of Eye-Tracking Data to Understand Operator Awareness

In the last 20 years, a number of accidents and incidents in commercial aviation have pointed to poor flight crew awareness of basic flight path parameters (e.g., airspeed, bank, pitch). As a result, there is a desire to improve pilot situation awareness and how attention is allocated. Eye-tracking has been a commonly used measure of awareness; it can aid in understanding whether specific indications were fixated, and perhaps how a pilot gathered information (that is, which indications in which sequence). In this paper, we discuss limitations on what eye-tracking data can reveal about pilot awareness and understanding. First, previous studies (e.g., Sarter et al., 2007) have shown that fixation on an indication may not ensure awareness or understanding. Further, an operator may have awareness of information not fixated. Additional measures—such as self-report or control inputs—can help to better establish the extent of pilot awareness and understanding. Second, sequences of fixations (scan patterns) have also become a performance measure. While a small number of recognized scan patterns have been validated for a small set of parameters on the Primary Flight Display (PFD), scan patterns have not been identified to support the broader context of flight path management or flight operations. More important is to understand the full set of drivers underlying the larger pattern of eye fixations; this approach moves away from the idea of well-established scan patterns as a marker of skilled performance and gives a larger role to pilot cognition. Pilots have various reasons to direct attention to specific elements on the interface, such as: - feedback tied to control inputs - a check on compliance with flight path targets - a reaction to an alert or a call out - attempt to understand an unexpected indication - assess progress toward a flight path target The importance of cognition is further implicated in the finding that pilot interviews show that fixating typically is accompanied by expectation; generally, pilots have a strong expectation of what value or indication they will see, which allows more efficient integration of information and an ability to identify indications that suggest an alternative account of the current system state. We will describe a range of eye-tracking measures and how they should and should not be used.

aviation↗

NASA NTRSDate not supplied

Extravehicular Mobility Unit System-Level Model (SINDA EMU) Usage for Operational Mitigations in Support of US EVA 80

During United States Extravehicular Activity 80 (US EVA 80), water was observed in the helmet of an Extravehicular Mobility Unit (EMU) during cabin repressurization. Through a comparative analysis and Test, Teardown, and Evaluation (TT&E) of this EMU, the most likely cause of the US EVA 80 water failure was determined to be sublimator carryover caused by a comparatively high latent load (water vapor production by the crewmember). High latent load can be reduced by the crewmember adjusting the thermal control valve (TCV) setting on the EMU to prevent the onset of significant sweating. To reduce the risk of high latent load leading to water in the helmet, a potential warning system was developed using the Systems Improved Numerical Differencing Analyzer EMU model (SINDA EMU). The goal of this warning system is to alert the crewmember when they are producing a high latent load and recommend adjustment of the TCV to increase cooling. This warning system was designed to ensure high risk conditions are avoided while simultaneously preventing a system that warns the crewmember too frequently. Theoretical tests of the warning system through modeling calculated that if the warning system were used during US EVA 80, the total latent load could have been reduced by up to 33% which would have significantly reduced the risk of water in the helmet. This analysis also investigated the effectiveness of the warning system on EVAs that occurred after US EVA 80.

Noah Andersen↗

NASA NTRS2023

BatAnalysis - A Comprehensive Python Pipeline for Swift BAT Survey Analysis

The Swift Burst Alert Telescope (BAT) is a coded aperture gamma-ray instrument with a large field of view that primarily operates in survey mode when it is not triggering on transient events. The survey data consists of eighty-channel detector plane histograms that accumulate photon counts over time periods of at least 5 minutes. These histograms are processed on the ground and are used to produce the survey dataset between 14 and 195 keV. Survey data comprises >90% of all BAT data by volume and allows for the tracking of long term light curves and spectral properties of cataloged and uncataloged hard X-ray sources. Until now, the survey dataset has not been used to its full potential due to the complexity associated with its analysis and the lack of easily usable pipelines. Here, we introduce the BatAnalysis python package , a wrapper for HEASoftpy, which provides a modern, open-source pipeline to process and analyze BAT survey data. BatAnalysis allows members of the community to use BAT survey data in more advanced analyses of astrophysical sources including pulsars, pulsar wind nebula, active galactic nuclei, and other known/unknown transient events that may be detected in the hard X-ray band. We outline the steps taken by the python code and exemplify its usefulness and accuracy by analyzing survey data from the Crab Pulsar, NGC 2992, and a previously uncataloged MAXI Transient. The BatAnalysis package allows for ∼ 18 years of BAT survey to be used in a systematic way to study a large variety of astrophysical sources.

Tyler Parsotan↗

NASA NTRSDate not supplied

Perturbations in Brain Functional Connectivity Patterns After Waking From Slow Wave Sleep Under Different Cognitive States

Sleep inertia refers to the state of transition between sleep and wake characterized by impaired alertness, confusion, and reduced cognitive and behavioral performance. While the behavioral symptoms of sleep inertia are well described, the neurological changes that lead to this state remain elusive. Here, to understand the state of sleep inertia and the reorganization that the brain undergoes, we took a graph theoretical approach and compared the EEG derived brain connectivity patterns before sleep and after waking up while participants (n = 10) performed multiple tasks that differed in cognitive complexities. We focused on how the degree and the clustering coefficient of brain regions (EEG sensors) change immediately after participants wake up from slow wave sleep. During a psychomotor vigilance task (PVT), designed to assess vigilant attention, we find that the brain regions with strong network connectivity (degree) before sleep show a reduction in connectivity after waking. In contrast, those with low connectivity before sleep have greater connectivity after waking. The regions that undergo these changes are specific to each participant and these findings are unique to the beta frequency range, which plays a key role in sensorimotor functioning and preserving the current state of the brain. Moreover, in tasks that required inhibitory control and arithmetic reasoning, we found that only regions with weak connectivity before sleep exhibited more connections after waking, but regions with high connectivity prior to sleeping remained unchanged, highlighting task specific effects. Furthermore, we find that during the PVT, the clustering coefficient within low frequency oscillations of the brain is reduced upon waking while it remains unchanged during other tasks. These results suggest that the connections between regions that are lost after abrupt awakening can be reallocated to other regions in order to renormalize the brain. However, this response may only be evident during specific cognitive states and may be more nuanced during complex task performance.

sleep inertia↗

NASA NTRSDate not supplied

Challenges in Observing, Modeling, and Forecasting the June 2023 Smoke Event Over the Northeast United States

In the first week of May 2023, boreal Canada began an early start to the biomass burning season when fires erupted across Alberta and western Saskatchewan. Smoke entered the troposphere and spread across the United States as biomass burning emissions in Canada quadrupled the prior maximum since the onset of the MODIS satellite record. Adding to the already existing smoke, wildfires ignited in Quebec on June 2, 2023, producing a heavy plume of aerosol over the northeastern part of the continent. Meteorological factors, including an area of low pressure situated, nearly stationary, over Maine, transported the smoke into a densely populated corridor containing the cities of Washington, DC, Baltimore, Philadelphia, and New York City. Air quality alerts became widespread as near-surface levels of fine particulate matter (PM2.5) exceeded harmful levels due the low altitude of the smoke plume. Forecasting the smoke transport and impacts of such events requires a complex combination of observed initial conditions for meteorology and aerosols, knowledge of the emissions from wildfires, and a state-of-the-art Earth System model that couples these components together. Using a case-study perspective with the Goddard Earth Observing System (GEOS), challenges associated with near real time forecasting of the smoke plume are presented. Analyzed and forecasted aerosol optical depth will be evaluated using available satellite and AERONET observations, while surface aerosol will be assessed relative to observations of PM2.5. Lacking real time estimates of biomass burning emissions for inputs to our forecast model, particular attention is given to the use of day-old biomass burning emissions throughout the forecast period covering the first ten days in June 2023, and the resulting reduction in forecast skill will be quantified.

Allison Collow↗

NASA NTRS2023

Improved Space Weather Observations and Modeling for Aviation Radiation

In recent years there has been a growing interest from the aviation community for space weather radiation forecasts tailored to the needs of the aviation industry. In 2019 several space weather centers began issuing advisories for the International Civil Aviation Organization alerting users to enhancements in the radiation environment at aviation flight levels. Due to a lack of routine observations, radiation modeling is required to specify the dose rates experienced by flight crew and passengers. While mature models exist, support for key observational inputs and further modeling advancements are needed. Observational inputs required from the ground-based neutron monitor network must be financially supported for research studies and operations to ensure real-time data is available for forecast operations and actionable end user decision making. An improved understanding of the geomagnetic field is required to reduce dose rate uncertainties in regions close to the open/closed geomagnetic field boundary, important for flights such as those between the continental US and Europe which operate in this region. Airborne radiation measurements, which are crucial for model validation and improvement, are lacking, particularly during solar energetic particle events. New measurement campaigns must be carried out to ensure progress and in situ atmospheric radiation measurements made available for real-time situational awareness. Furthermore, solar energetic particle forecasting must be improved to move aviation radiation nowcasts to forecasts in order to meet customer requirements for longer lead times for planning and mitigation.

space weather↗

NASA NTRSDate not supplied

Integration of Automated Systems (IAS) Flight Test Overview

The Integration of Automated Systems (IAS) Project is conducting a series of 2023 flight tests supporting NASA's Advanced Air Mobility (AAM) and National Campaign efforts. These flights include crewed, test (i.e., ownship) and traffic (i.e., intruder) aircraft that will fly with unique technologies onboard. The presentation will include overviews of the Hazard Perception and Avoidance (HPA) and Flight Path Management (FPM) technical areas but will focus primarily on HPA. HPA will test the FAA's Airborne Collision Avoidance System X (ACAS X), a next-generation collision avoidance tool developed to support different aircraft types and operations. The rotorcraft variant, ACAS Xr, is designed to accommodate existing helicopter platforms and in-development, vertical takeoff and landing (VTOL) concepts, which are critical to the emerging AAM concept of operations. Two configurations of ACAS Xr will be examined: Collision Avoidance System (CAS, similar to the Traffic Collision Avoidance System [TCAS] II) and Detect and Avoid (DAA, previously developed to provide added situational awareness for uncrewed aircraft). Additionally, this system will be explored during cruise and low-speed flight as well as flights within en-route, structured (i.e., dense/urban), and terminal airspaces. Scripted flight conflicts will be conducted, and these conflicts will be mitigated through maneuvers that are manual (i.e., performed by the pilots) or automated (i.e., achieved by the cooperation of the program middleware and onboard ownship systems). Objective data will be collected involving system and pilot performance as well as pilot decisions; subjective data will include pilot opinions of ACAS Xr's alerting and guidance as well as the automated maneuvers.

detect and avoid↗

NASA NTRSDate not supplied

Challenges in Observing, Modeling, and Forecasting the June 2023 Smoke Event over the Northeast United States

In the first week of May 2023, boreal Canada began an early start to the biomass burning season when fires erupted across Alberta and western Saskatchewan. Smoke entered the troposphere and spread across the United States as biomass burning emissions in Canada quadrupled the prior maximum since the onset of the MODIS satellite record. Adding to the already existing smoke, wildfires ignited in Quebec on June 2, 2023, producing a heavy plume of aerosol over the northeastern part of the continent. Meteorological factors, including an area of low pressure situated, nearly stationary, over Maine, transported the smoke into a densely populated corridor containing the cities of Washington, DC, Baltimore, Philadelphia, and New York City. Air quality alerts became widespread as near-surface levels of fine particulate matter (PM2.5) exceeded harmful levels due the low altitude of the smoke plume. Forecasting the smoke transport and impacts of such events requires a complex combination of observed initial conditions for meteorology and aerosols, knowledge of the emissions from wildfires, and a state-of-the-art Earth System model that couples these components together. Using a case-study perspective with the Goddard Earth Observing System (GEOS ), challenges associated with near real time forecasting of the smoke plume are presented. Analyzed and forecasted aerosol optical depth will be evaluated using available satellite and AERONET observations, while surface aerosol will be assessed relative to observations of PM2.5. Lacking real time estimates of biomass burning emissions for inputs to our forecast model, particular attention is given to the use of day-old biomass burning emissions throughout the forecast period covering the first ten days in June 2023, and the resulting reduction in forecast skill will be quantified.

Allison Collow↗

NASA NTRS2023

CEPS – A Compact Electron-Proton Spectrometer

Small mass/low-power sensors are needed for autonomous Moon/Mars surface ops that provide alerts to impending adverse space weather conditions. In order to use current operational forecasting tools, a sensor capable of measuring both high-energy electrons and protons is needed. By combining high-TRL Timepix technology with a CdTe layer, this project leverages known technology to fill a critical gap for surface operations. Typical space weather sensors are at least an order of magnitude higher in mass than is expected from Timepix-based devices and are deployed on robotic assets away from human crews. High fidelity measurements at the crew location and subsequent ability are needed to provide warnings to crews to shelter with a device that can easily be carried on the Lunar and Martian surfaces. The aim of this project is the development of compact, low power space weather sensors for crew protection based on the combination of AES flight heritage Timepix hardware with novel CdTe (Cadmium Telluride) sensors. CdTe technology has only recently matured to a point where it can be reliably used with Timepix detectors. These detectors will be able to measure electron spectra in an energy range relevant to the RELEASE model, which is used operationally by NASA to provide crew early warning of Solar Energetic Particle Events as well as protons in the energy ranges relevant to human health allowing for event ‘nowcasting’ and total event crew dose prediction. Compared to existing solutions these detectors will be compact enough to travel with crew, providing a significant advantage to space environment situation awareness. Project results indicate that CdTe-based Timepix sensors respond well to energetic electrons, and particle tracks are sufficiently distinct to be able to measure in a mixed radiation field. Detector response functions were developed for both electrons and protons. Measurement results showed response to both electrons and protons in the energy range of interest for human space flight.

Radiation↗

NASA NTRSDate not supplied

NASA GEOS-CF: Overview, Applications, Future Direction

K. Emma Knowland↗

NASA NTRSDate not supplied

Global Rescue Response to a Multivehicle Deorbit from the International Space Station

The U.S. Department of Defense (DoD) has been tasked to support rescue efforts in the event of an off-nominal landing of a Commercial Crew Program vehicle transporting NASA crewmembers to or from the International Space Station. The DoD is further tasked to support returning U.S. and International Partner crewmembers on Russian Soyuz spacecraft missions, specifically to ensure aeromedical evacuation capability in the event of a crewmember injury at the time of launch or landing. This DoD mission is primarily considered during planned launch and landing operations, with forces placed in an alert posture to support if needed. However, overall mission concept of operations encompasses a no-notice rescue capability in the event of an on-orbit emergency. Such contingency scenarios are pre-coordinated and simulated to ensure a ready posture of associated DoD assets and to promote coordination of government, commercial, and military stakeholders. To date, planning and simulations have focused on execution of a single rescue mission; the possibility of a multi-vehicle evacuation and rescue scenario has not been adequately explored. This presentation will examine the process of responding to an emergency onboard the International Space Station that results in the early departure and deorbit of multiple docked vehicles to preserve the health and safety of the crew. We will highlight the complexity of this recovery scenario and discuss potential complications that could arise, as well as identify areas in which deliberate planning and simulation can better ensure successful preparation for such a multifaceted recovery operation.

Travis Levon Houser↗

NASA NTRSDate not supplied

On The Processing of Log Files for Monitoring Antenna Health

In order to improve the quality of geodetic results, we have developed an infrastructure for timely processing of telemetry from IVS observing stations. We check every hour for new log files with telemetry from both VLBI observing sessions, single dish experiments, and stow-in data collection and automatically process them. The telemetry data we use is the system temperature, phase calibration phases and amplitudes, system equivalent flux density, and the differences between formatter clock and GPS clock. For the system temperature and phase calibration, processing includes filtering out outliers and computing averages and rms of the scatter in each scan. Furthermore, for the phase calibration we also compute the group delay and detect spurious signals. Cleaned and post-processed telemetry is archived. Our process detects abnormalities, such as, anomalously high system temperature, unstable phase calibration phases, jumps in the GPS and formatter clock differences, and others. With our procedure, the latency of detection of station abnormalities is reduced to less than two hours. Early detection of abnormalities reduces the amount of affected data since station personnel get early alerts. We discuss our experience of running this system since 2022.

Phase Calibration↗

NASA NTRSDate not supplied

Global-to-local air quality forecasts using the NASA GEOS Composition Forecast System

Since 2019, the NASA Global Earth Observing System (GEOS) model has been used to generate global, near-real-time estimates and daily five-day forecasts of atmospheric composition at a horizontal resolution of 0.25 degrees (~25 km) from the surface up to the lower mesosphere. This composition forecast system (“GEOS-CF”) combines the GEOS weather forecasting model with the state-of-the-science GEOS-Chem chemistry module to deliver detailed analysis of a wide range of air pollutants, including the policy-relevant species such as ozone, carbon monoxide, nitrogen oxides, sulfur dioxide and fine particulate matter (PM2.5). Because GEOS-CF includes atmospheric levels up through the stratosphere, this system has been leveraged to support the Tropospheric Emissions: Monitoring of Pollution (TEMPO) satellite mission and provide stratospheric intrusion alerts to ground-based monitoring stations. We will present recent advances to GEOS-CF which target increased computational efficiency and accuracy. These include the incorporation of simplified chemistry mechanisms to accelerate model forecasts, use of model-observation data fusion techniques to provide highly localized forecasts, and assimilation of satellite observations to produce more accurate model analyses. We further discuss our attempts to make these tools publicly available on platforms outside the NASA domain, such as Google Earth Engine and Amazon Web Services with the goal to facilitate the integration of state-of-the-science air quality information onto platforms used by stakeholders, air quality managers, and the public.

Emma Knowland↗

NASA NTRSDate not supplied

Changes in Oculomotor Behavior and PVT Reaction Time During One Night of Sleep Deprivation

INTRODUCTION: The Psychomotor Vigilance Test (PVT) is a widely used objective measure of sustained attention, alertness, and fatigue. Previous studies consistently show that prolonged wakefulness and disrupted sleep patterns lead to increased lapses of attention and slower reaction times. These findings have critical implications for various professions, including healthcare, aviation, transportation safety, and spaceflight. In this study, we employed linear mixed models (LMM) to investigate hourly-measured 5-minute PVT reaction times during one night of total sleep deprivation. Our goal was to characterize the contribution of homeostatic sleep pressure (time awake) and circadian phase (salivary melatonin levels) on the dynamics of PVT reaction time. MATERIALS & METHODS: Data from twelve human participants were used in the analysis. Participants were healthy non-smokers, aged 18 and 40, with normal sleep habits defined as Pittsburg Sleep Quality Index scores < 5, and Morningness – Eveningness Questionnaire scores > 42 and < 58, respectively. Participants followed a constant-routine protocol and arrived at the NASA sleep laboratory approximately 1 to 2 hours after their habitual waking time. Tympanic temperature was measured every 30 min to provide a real-time estimate of circadian phase. Participants were required to stay awake throughout the laboratory experiment, which continued until their tympanic temperature had returned to baseline levels. This approach ensured that we could capture each participant's circadian trough and recovery, typically occurring between 24 and 26 hours after waking. The PVT and saliva melatonin were measured every hour, starting approximately from 3 hours after awakening. More information about the measurement protocol can be found in the publication by Stone et al. We used PVT reaction times between 100 and 10000 ms to calculate Reciprocal Reaction Times (RRTs). LMM models were employed to assess the contribution of time awake and saliva melatonin levels on changes in RRTs. Two models were created: the first model treated time awake as a fixed effect and the second model considered both the salivary melatonin level and time awake as fixed effects. Participants were included as a random effect in both models. We compared the models using an Analysis of Variance (ANOVA). The models were computed using the 'lmer' function from the 'lme4' package in R, and LMM p-values were determined using Satterthwaite's method. RESULTS: We found that time awake had a statistically significant effect on PVT RRTs during one night of sleep deprivation [χ2 = 2132.4, df = 1, p < 0.001]. In addition, the model including both saliva melatonin levels and time awake was statistically significantly better than one that uses just time awake [χ2 = 17.4, df = 1, p < 0.001]. DISCUSSION & CONCLUSION: As expected, these preliminary results suggest that the time awake and circadian phase each contribute to performance reductions as measured by the PVT. Future analyses will explore the contributions of other factors to the model.

sleep deprivation↗