Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Abstract”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,333 records · Page 74

Preparation of polymer/LDH nanocomposite by UV-initiated photopolymerization of acrylate through photoinitiator-modified LDH precursor

Graphical abstract: This is the HR-TEM micrograph of UV cured nanocomposite at 5 wt% LDH-2959 loading for a-5 sample. The dark lines are the intersections of LDH platelets. It can be seen that samples a-5 dispersed in the polymer matrix and lost the ordered stacking-structure and show the completely exfoliation after UV curing. This can be explained by the fact that the sample a-5 only containing LDH-2959 exhibited a relative lower photopolymerization rate, which was propitious to further expand the LDH intergallery to form the exfoliated structure. Research highlights: {yields} The UV cured polymer/LDH nanocomposites were prepared through the photopolymerization initiated by the photoinitiator-modified LDH precursor, LDH-2959. {yields} The exfoliated UV cured nanocomposites were achieved in the presence of LDH-2959 only. However, the UV cured nanocomposites prepared using both LDH-2959 and Irgacure 2959 showed the intercalated structure. {yields} Compared with the pure polymer, the exfoliated polymer/LDH nanocomposite showed remarkable enhanced thermal stability and mechanical properties because of their well dispersion in the polymer matrix. -- Abstract: The exfoliated polymer/layered double hydroxide (LDH) nanocomposite by UV-initiated photopolymerization of acrylate systems through an Irgacure 2959-modified LDH precursor (LDH-2959) as a photoinitiator complex was prepared. The LDH-2959 was obtained by the esterification of 2-hydroxy-4'-(2-hydroxyethoxy)-2-methylpropiophenone (Irgacure 2959) with thioglycolic acid, following by the addition reaction with 3-(2,3-epoxypropoxy)propyltrimethoxysilane (KH-560), finally intercalation into the sodium dodecyl sulfate-modified LDH. For comparison, the intercalated polymer/LDH nanocomposite was obtained with additive Irgacure 2959 addition. From the X-ray diffraction (XRD) measurements and HR-TEM observations, the LDH lost the ordered stacking-structure and well dispersed in the polymer matrix at 5 wt% LDH-2959 loading. The glass transition temperature of UV-cured exfoliated nanocomposites increased to 64 {sup o}C from 55 {sup o}C of pure polymer without LDH addition. The tensile strength was improved from 10.1 MPa to 25.2 MPa, as well the Persoz hardness enhanced greatly, while the elongation at break remained an acceptable level.

36 MATERIALS SCIENCE↗

Rapid synthesis of single-crystalline TbF{sub 3} with novel nanostructure via ultrasound irradiation

Graphical abstract: Terbium fluoride (TbF{sub 3}) nanopeanut has been successfully synthesized via a mild sonochemical route from an aqueous solution of terbium nitrate and fluoroborate without any template or organic additive. Research highlights: {yields} Research highlights {yields} TbF3 nanopeanut was prepared via sonochemical method. {yields} The morphologies of TbF3 can be tuned by ultrasound irradiation and fluoride source. {yields} The TbF3 nanopeanut shows high photoluminescence intensity. -- Abstract: Terbium fluoride (TbF{sub 3}) nanopeanut has been successfully synthesized via a mild sonochemical route from an aqueous solution of terbium nitrate and fluoroborate without any template or organic additive. X-ray diffraction, scanning electron microscopy, transmission electron microscopy, and photoluminescence (PL) spectra were utilized to characterize the synthesized samples. The morphologies and optical properties of the obtained TbF{sub 3} nanopeanut can be tuned by ultrasound irradiation as well as the fluoride source. The prepared TbF{sub 3} nanopeanut shows extraordinarily high room temperature photoluminescence intensity comparing to the products prepared by stirring. The possible formation mechanism is proposed in this paper.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Hydrothermal synthesis and luminescence properties of octahedral LiYbF{sub 4}: Er{sup 3+} microcrystals

Graphical abstract: LiYbF{sub 4}: Er{sup 3+} octahedral microcrystals have been successfully prepared through a facile hydrothermal method assisted with EDTA. SEM, HRTEM, RD, PL spectra are used to characterize the samples. It can be seen from SEM data that the complexing agent EDTA made to hydrothermal synthetic procedures result in formation of LiYbF{sub 4} octahedral microparticles with smooth surface. From the HRTEM images, the distances between the lattice fringes were measured to be 2.99 A and 2.57 A which correspond to the d-spacing for (1 1 2) and (2 0 0) planes, respectively. From the XRD patterns for the LiYb{sub 0.99}Er{sub 0.01}F{sub 4} in the absence of chelating agent EDTA and in the presence of EDTA, it is evident that the diffraction peaks of both patterns are highly crystalline and all of the peaks could be readily indexed to the LiYbF{sub 4} phase (JCPDS 71-1211). No other impurity peaks were detected. Under 976 nm excitation, the upconversion (UC) luminescence emission spectra of LiYbF{sub 4}: Er{sup 3+} microcrystals show the characteristic Er{sup 3+} emissions. The results show that the infrared light emissions at 792 nm of {sup 4}I{sub 9/2} {yields} {sup 4}I{sub 15/2} are dominantly strong unusually, while the green emissions at 526 and 545 nm assigned to {sup 2}H{sub 11/2} {yields} {sup 4}I{sub 15/2} and {sup 4}S{sub 3/2} {yields} {sup 4}I{sub 15/2}, respectively, and the red emission at 667 nm of {sup 4}F{sub 9/2} {yields} {sup 4}I{sub 15/2} are relatively weaker. Research highlights: {yields} Monodisperse and regular octahedral microcrystals LiYbF{sub 4}: Er{sup 3+} with smooth surface has been prepared. {yields} The characteristic emissions of Er{sup 3+} ions are observed in LiYbF{sub 4} microcrystals. {yields} The content of EDTA will influence the fluorescence intensity. {yields} Luminescence intensity increases gradually at the beginning and then decreases gradually with increasing temperature. -- Abstract: LiYbF{sub 4}: Er{sup 3+} octahedral microcrystals have been successfully prepared through a facile hydrothermal method assisted with EDTA (ethylenediaminetetraacetic acid). X-ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM), high-resolution transmission electron microscopy (HRTEM), Fourier transform infrared spectroscopy (FTIR), thermogravimetric and differential scanning calorimeters (TG-DSC), photoluminescence (PL) spectra are used to characterize the samples. Under 976 nm excitation, the upconversion (UC) luminescence emission spectra of LiYbF{sub 4}: Er{sup 3+} microcrystals show the characteristic Er{sup 3+} emissions. The results show that the infrared light emissions at 792 nm of {sup 4}I{sub 9/2} {yields} {sup 4}I{sub 15/2} are dominantly strong unusually, while the green emissions at 526 and 545 nm assigned to {sup 2}H{sub 11/2} {yields} {sup 4}I{sub 15/2} and {sup 4}S{sub 3/2} {yields} {sup 4}I{sub 15/2}, respectively, and the red emission at 667 nm of {sup 4}F{sub 9/2}{yields}{sup 4}I{sub 15/2} are relatively weaker. Most importantly, the samples show more efficient luminescence with further heat treatment.

36 MATERIALS SCIENCE↗

TiO{sub 2}-coated foams as a medium for solar catalysis

Graphical abstract: Photographs taken at the Scanning Electron Microscope of (a) a surface coating of TiO{sub 2}, (b) a mesh of a foam (mesh diameter of 2 mm) and (c) a foam. Research highlights: {yields} Assess the efficiency of the foams as a photocatalytic media. {yields} Foam to improve the apparent quantum yield. {yields} Foam makes good use of the UV rays to break down molecules. -- Abstract: Sunlight irradiating the surface of the Earth represents a maximum input available for a solar catalytic process of 50 W{sub UV} m{sup -2}. We propose using high-porosity, metallic, reticulated foams as the support medium for the photocatalyst in order to improve the apparent quantum yield. The layer of TiO{sub 2} was applied by dip-coating. The measurement of the degradation kinetics was carried out on a model target molecule, 2,4 dichlorophenol, at an initial concentration of 10 mg l{sup -1}. The aim was to assess the efficiency of the foams as a photocatalytic media compared to that of a suspension of catalytic powder (Degussa P25) and the flat 2D support (Ahlstrom cellulose media). The apparent quantum yield of the foam scaffold carrying the TiO{sub 2} was high, showing that, as with the powder suspension, foam makes good use of the UV rays to break down molecules. It is noteworthy that the apparent quantum yield of the foam tended towards that observed for suspensions which form the ideal support thanks to their optimal ability to harness the light.

36 MATERIALS SCIENCE↗

Synthesis and magnetic properties of layered MnPS{sub x}Se{sub 3-x} (0 < x < 3) and corresponding intercalation compounds of 2,2'-bipyridine

Graphical abstract: A series of new layered MnPS{sub x}Se{sub 3-x} (0 < x < 3) compounds and the corresponding intercalation compounds of 2,2'-bipyridine were designed and synthesized and the structure was determined by XRD, TF-IR and elemental analysis. It was found that MnPS{sub x}Se{sub 3-x} exhibited antiferromagnetism similar to MnPS{sub 3} or MnPSe{sub 3}, but the intercalation of 2,2'-bipyridine can dramatically change the properties of MnPS{sub x}Se{sub 3-x} slab. Research highlights: {yields} A series of new MnPS{sub x}Se{sub 3-x} are designed and synthesized for the first time and their layered structure has been determined. {yields} The intercalation chemistry has been initially studied via the intercalation of 2,2'-bipyridine with MnPS{sub x}Se{sub 3-x}. {yields} The magnetic properties of the series MnPS{sub x}Se{sub 3-x} and the corresponding intercalation compounds of 2,2'-bipydine have been studied. And the relationship between the structure and the magnetic propertied has been primarily explored. -- Abstract: In this work, we synthesize a series of new MnPS{sub x}Se{sub 3-x} (0 < x < 3) compounds by high temperature solid-state reaction and also obtain the corresponding intercalation compounds (Mn{sub 1-y}PS{sub x}Se{sub 3-x}(bipy){sub 4y}, x = 1.2, 1.8 and 2.4) via the intercalation of 2,2'-bipyridine with MnPS{sub x}Se{sub 3-x}. XRD results confirm that MnPS{sub x}Se{sub 3-x} compounds show the layered structure and can be regarded as the solid solution of MnPS{sub 3} and MnPSe{sub 3}. Magnetic measurements indicate that MnPS{sub x}Se{sub 3-x} compounds exhibit paramagnetism with negative Weiss constant in the paramagnetic temperature region, and an antiferromagnetic phase transition occurs at the Neel temperature. It is found that the magnetic properties of MnPS{sub x}Se{sub 3-x} slab are dramatically changed after the intercalation of 2,2'-bipyridine, which is close related to the relative ratio of S and Se atom as well as the intralayered Mn{sup 2+} vacancies of MnPS{sub x}Se{sub 3-x} slab.

36 MATERIALS SCIENCE↗

Annealing effects on the chemical deposited CdS films and the electrical properties of CdS/CdTe solar cells

Graphical abstract: From XPS core level spectras, compared with as-depositing CdS (sample A), the Fermi level is shifting closer to the conduction band after annealing treatment in the oxygen (sample B) while it is shifting closer to the valence band after annealing treatment in the argon-hydrogen (sample C). That might be the main reason of the different performance of the final devices. The open circuit voltage of the CdS/CdTe solar cell increases when the CBD CdS is annealed with oxygen, while the performance of the solar cell decreases when the CBD CdS is annealed with argon-hydrogen. Research highlights: {yields} Two different methods (oxidation and reduction) were used to anneal CdS films for CdTe solar cells. {yields} Electrical properties were analyzed by XPS (Fermi levels of CdS films). {yields} Annealing treatment in oxidation atmosphere could shift Fermi level of CdS film to higher position and consequently improve the CdS/CdTe junction and performance of solar cells. -- Abstract: CdS layers grown by chemical bath deposition (CBD) are annealed in the oxygen and argon-hydrogen atmosphere respectively. It has been found that the open circuit voltage of the CdS/CdTe solar cell increases when the CBD CdS is annealed with oxygen before the deposition of CdTe by close spaced sublimation (CSS), while the performance of the solar cell decreases when the CBD CdS is annealed with argon-hydrogen. Electronic properties of the CdS films are investigated using X-ray photo-electron spectroscopy (XPS), which indicates that the Fermi level is shifting closer to the conduction band after annealing in the oxygen and consequently a higher open circuit voltage of the solar cell can be obtained.

36 MATERIALS SCIENCE↗

The crystal and magnetic structure of Ti-substituted LaCrO{sub 3}

Graphical abstract: Rietveld refinement plot of La(Cr{sub 0.90}Ti{sub 0.10})O{sub 3}; the inset shows the antiferromagnetic G{sub x}-type structure occurring at the Cr sub-lattice. Research highlights: {yields} Magnetic structure of Ti-substituted LaCrO{sub 3}. {yields} Spins on the Cr-site order according to an antiferromagnetic G{sub x}-type ordering. {yields} Limited solid state solubility of Ti{sup 4+} in LaCrO{sub 3} and mixed valence at Cr site. -- Abstract: The crystal and magnetic structures of LaCrO{sub 3} and La(Cr{sub 0.90}Ti{sub 0.10})O{sub 3} have been investigated between 5 and 350 K by means of neutron powder diffraction and DC magnetic measurements. Both compounds are characterized by an antiferromagnetic G{sub x}-type ordering at low temperature. Structural features suggest the occurrence of Ti in the tetra-valent state. Despite the mixed valence induced by Ti-substitution leading to the occurrence of the Jahn-Teller species Cr{sup 2+}, no evidence for long range ferromagnetism can be detected. On account of a miscibility gap, a higher degree of Ti-substitution at the Cr site cannot be achieved; as a consequence the solid state solubility of Ti in LaCrO{sub 3} at 1573 K has been ascertained.

36 MATERIALS SCIENCE↗

Thermal stability and transport studies of (100 - 2x)TeO{sub 2}-xAg{sub 2}O-xWO{sub 3} (7.5 {<=} x {<=} 30) glass system

Graphical abstract: Typical modulated DSC (NRHF and C{sub p}) results during a heating scan in the 85TeO{sub 2}-7.5Ag{sub 2}O-7.5WO{sub 3} glass sample. Research highlights: {yields} The addition of equal mol% of WO{sub 3} and Ag{sub 2}O to TeO{sub 2} increases the thermal stability. {yields} The 55TeO{sub 2}-22.5WO{sub 3}-22.5Ag{sub 2}O shows the highest thermal stability ({Delta}T = 237 {sup o}C). {yields} These glasses are more useful for drawing of optical fibers. {yields} The present glass system shows higher conductivity. -- Abstract: Differential scanning calorimetry (DSC), infrared (IR) and direct current (DC) conductivity studies have been carried out on (100 - 2x)TeO{sub 2}-xAg{sub 2}O-xWO{sub 3} (7.5 {<=} x {<=} 30) glass system. The IR studies show that the structure of glass network consists of [TeO{sub 4}], [TeO{sub 3}]/[TeO{sub 3+1}], [WO{sub 4}] units. Thermal properties such as the glass transition (T{sub g}), onset crystallization (T{sub o}), thermal stability ({Delta}T), glass transition width ({Delta}T{sub g}), heat capacities in the glassy and liquid state (C{sub pg} and C{sub pl}), heat capacity change ({Delta}C{sub p}) and ratios C{sub pl}/C{sub pg} of the glass systems were calculated. The highest thermal stability (237 {sup o}C) obtained in 55TeO{sub 2}-22.5Ag{sub 2}O-22.5WO{sub 3} glass suggests that this new glass may be a potentially useful candidate material host for rare earth doped optical fibers. The DC conductivity of glasses was measured in temperature region 27-260 {sup o}C, the activation energy (E{sub act}) values varied from 1.393 to 0.272 eV and for the temperature interval 170-260 {sup o}C, the values of conductivity ({sigma}) of glasses varied from 8.79 x 10{sup -9} to 1.47 x 10{sup -6} S cm{sup -1}.

36 MATERIALS SCIENCE↗

Synthesis, structure, growth and physical properties of a novel organic NLO crystal: 1,3-Dimethylurea dimethylammonium picrate

Graphical abstract: 1,3-Dimethylurea dimethylammonium picrate is identified as potential candidate for efficient frequency conversion. Research highlights: {yields} A new organic crystal, 1,3-dimethylurea dimethylammonium picrate, crystal has been grown for the first time and reported. {yields} The structure is reported for the first time in the literature. {yields} The high resolution X-ray diffraction curve (DC) measurements substantiate the good quality of the crystals. {yields} Powder test with Nd:YAG laser radiation shows a high second harmonic generation. {yields} Single shot and multiple shot (50 pulses) surface laser damage thresholds are determined to be 0.42 GW/cm{sup 2} and 0.31 GW/cm{sup 2} at 532 nm laser radiation, respectively. -- Abstract: A novel noncentrosymmetric crystal was prepared from 1,3-dimethylurea dimethylammonium picrate, C{sub 11}H{sub 18}N{sub 6}O{sub 8} (DMUP), which was designed for second harmonic generation. DMUP crystals exist in noncentro symmetric space group Cmc2{sub 1} with unit cell dimensions a = 14.288(4) A, b = 17.023(5) A, c = 6.8268(13) A, {alpha} = {beta} = {gamma} = 90{sup o} and volume = 1660.5(8) A{sup 3}. The crystal structure of DMUP has been determined using single crystal X-ray diffraction studies. The single crystals of DMUP were successfully grown by the slow evaporation method with dimensions 10 mm x 4 mm x 3 mm using dimethylformamide as solvent. The structural perfection of the grown crystals has been analysed by High-resolution X-ray diffraction (HRXRD) rocking curve measurements. Powder test with Neodymium-doped Yttrium aluminum garnet (Nd:YAG) laser radiation shows a high second harmonic generation (SHG). The laser induced surface damage threshold for the grown crystal was measured using Nd:YAG laser.

36 MATERIALS SCIENCE↗

Synthesis and electrical properties of scheelite Ca{sub 1-x}Sm{sub x}MoO{sub 4+{delta}} solid electrolyte ceramics

Graphical abstract: Scheelite-type Ca{sub 1-x}Sm{sub x}MoO{sub 4+{delta}} electrolyte ceramics can be considered as one of the best candidates to replace the YSZ electrolyte materials for SOFCs because of their high oxide ion conduction. Research highlights: {yields} Sm{sub x}Ca{sub 1-x}MoO{sub 4+{delta}} solid electrolyte with a tetragonal scheelite structure. {yields} Sm{sub x}Ca{sub 1-x}MoO{sub 4+{delta}} electrolyte is one of the best candidates to replace the YSZ electrolyte for SOFCs because of their high oxide ion conduction. {yields} The sintering temperature is greatly lower than traditional YSZ electrolyte. -- Abstract: Scheelite-type Ca{sub 1-x}Sm{sub x}MoO{sub 4+{delta}} electrolyte powders were prepared by the sol-gel auto-combustion process. The crystal structure of the samples was determined by employing the techniques of X-ray diffraction (XRD). According to the XRD analysis, the formed continuous series of Ca{sub 1-x}Sm{sub x}MoO{sub 4+{delta}} (0 {<=} x {<=} 0.3) solid solutions had the structure of tetragonal scheelite, and the lattice parameters increased with increasing x in the Sm-substituted system. Results of sinterability and electrochemical testing revealed that the performances of Sm-doped calcium molybdate were superior to that of pure CaMoO{sub 4}. Ca{sub 1-x}Sm{sub x}MoO{sub 4+{delta}} ceramics show higher sinterability, and the Ca{sub 0.8}Sm{sub 0.2}MoO{sub 4+{delta}} sample with 98.7% of the theoretical density were obtained after being sintered at 1250 {sup o}C for 4 h. The conductivity increased with increasing samarium content, and a total conductivity 9.54 x 10{sup -3} S cm{sup -1} at 800 {sup o}C could be obtained in Ca{sub 0.8}Sm{sub 0.2}MoO{sub 4+{delta}} sintered at 1250 {sup o}C for 4 h.

36 MATERIALS SCIENCE↗

Synthesis, dielectric behavior and impedance measurement studies of Cr-substituted Zn-Mn ferrites

Graphical abstract: Variation of dielectric constant with frequency. Research highlights: {yields} Sol-gel route synthesized spherical crystalline nanoparticles of ZnMn{sub 1-x}Cr{sub x}FeO{sub 4}. {yields} XRD, DTA, FTIR, SEM, dielectric and impedance study. {yields} The ferrites show concentration dependence of ac electrical conductivity. {yields} Impedance response is dominated by grain boundary behavior. -- Abstract: Nanocrystalline ZnMn{sub 1-x}Cr{sub x}FeO{sub 4} (1.0 {>=} x {>=} 0) ferrites were synthesized by sol-gel technique. X-ray diffraction (XRD) confirmed the formation of single phasic cubic spinel lattice for all the compositions studied. Lattice parameter shows a decreasing trend with an increase in Cr content in the compositions. Formation of spherical nanoparticles was revealed by scanning electron microscopy (SEM) analysis. Infrared spectroscopic studies revealed two main absorption bands in the range 400-800 cm{sup -1} arising due to tetrahedral (A) and octahedral (B) site vibrations. Dielectric constant, dielectric loss tangent, ac conductivity and complex impedance were measured as a function of frequency in the range 20 Hz to 1 MHz. Frequency dependence of dielectric constant shows dielectric dispersion due to the Maxwell-Wagner type of interfacial polarization. The role of chromium in modifying structural and dielectric properties of these ferrites has been explained.

36 MATERIALS SCIENCE↗

Preparation of grape-like Bi{sub 2}O{sub 3}/Ti photoanode and its visible light activity

Graphical abstract: Compact and grape-like bismuth oxide (Bi{sub 2}O{sub 3}) coated titania (Ti) anode was prepared by oxalic acid (H{sub 2}C{sub 2}O{sub 4}) etching, electrodeposition and calcination in order to explore its photoelectrocatalytic activities. The Bi{sub 2}O{sub 3} coating was demonstrated to be full of pores, and a good combination between Bi{sub 2}O{sub 3} layer and honeycomb-like Ti substrate was observed by scanning electron microscopy. A synergy was found between electrolysis and photocatalysis using the prepared Bi{sub 2}O{sub 3}/Ti anode for photoelectrocatalytic oxidation of azo dye Acid Orange 7 under visible light irradiation (420 nm). Research highlights: {yields} Bi{sub 2}O{sub 3}/Ti anode was prepared by H{sub 2}C{sub 2}O{sub 4} etching, electrodeposition and calcination. {yields} A compact and grape-like Bi{sub 2}O{sub 3} coated Ti anode was obtained. {yields} Bi{sub 2}O{sub 3} coating was full of pores, and have a good combination with Ti substrate. {yields} A synergy was observed in photoelectrocatalytic oxidation under visible light. -- Abstract: Compact and grape-like bismuth oxide (Bi{sub 2}O{sub 3}) coated titania (Ti) anode was prepared by oxalic acid (H{sub 2}C{sub 2}O{sub 4}) etching, electrodeposition and calcination in order to explore its photoelectrocatalytic activities. The Bi{sub 2}O{sub 3} coating was demonstrated to be full of pores, and a good combination between Bi{sub 2}O{sub 3} layer and honeycomb-like Ti substrate was observed by scanning electron microscopy. The characteristic morphology of Bi{sub 2}O{sub 3} coating indicated that the electrode is stable during degradation. The Bi{sub 2}O{sub 3}/Ti electrode was used in oxidative degradation of Acid Orange 7 by electrolysis, photocatalytic oxidation and photoelectrocatalytic oxidation processes. The pseudo-first order kinetics parameter (K{sub app}) of photoelectrocatalytic process was 1.15 times of the sum of electrolysis and photocatalytic oxidation under visible light irradiation at 420 nm. The results indicated that the synergy of electrolysis and photocatalysis lead to an excellent photoelectrocatalytic property of the Bi{sub 2}O{sub 3}/Ti electrode.

36 MATERIALS SCIENCE↗

Electrochemical performance of CuO nanocrystal film fabricated by room temperature sputtering

Graphical abstract: High capacity of CuO thin film electrode for all-solid-state thin film batteries. Research highlights: {yields} Nanostructured CuO thin film is prepared by in situ sputtering. {yields} Excellent electrochemical performance with a very high capacity is achieved. {yields} Due to nanostructured grains, the in situ formed CuO possesses good cyclability. -- Abstract: To develop high performance anode materials for thin film batteries, copper oxide (CuO) film is fabricated at room temperature by reactive radio frequency magnetron sputtering. Morphological characterization shows that the CuO film consists of compacted CuO columnar grains of 20 nm in diameter and 200 nm in thickness. The measurement of lithium storage capacity and cyclability of the CuO film show that the first charge capacity of the film is 585 mAh g{sup -1} with an efficiency of 68.3% at a current density of 200 mA g{sup -1}. After the 50th cycle, the capacity retention remains as high as 97.4%. The nanostructured CuO film also shows a good rate capability even being cycled at 3000 mA g{sup -1} (5 C), demonstrating that the CuO film can be a promising material as an anode for high performance thin film batteries, especially for thin film battery with amorphous electrolyte.

36 MATERIALS SCIENCE↗

Structural, magnetic and dielectric properties of Bi{sub 1-y}Sr{sub y}Fe{sub (1-y)(1-x)}Sc{sub (1-y)x}Ti{sub y}O{sub 3} (x = 0-0.2, y = 0.1-0.3) ceramics

Graphical abstract: Bi{sub 1-y}Sr{sub y}Fe{sub (1-y)(1-x)}Sc{sub (1-y)x}Ti{sub y}O{sub 3} (x = 0-0.2, y = 0.1-0.3) ceramics were obtained by solid-state reaction method. Addition of scandium could simultaneously reduce magnetic coercive field and enhance dielectric properties of prepared samples. Research highlights: {yields} The electrical resistivity of BiFeO{sub 3} is enhanced by forming solid solution with SrTiO{sub 3}. {yields} We further replace Fe{sup 3+} by Sc{sup 3+} in solid solution to reduce H{sub c} and achieve a soft magnet. {yields} Structure-magnetic property relationship has been established by Rietveld refinement. {yields} Sc{sup 3+} substitution can inhibit the dielectric loss effectively. -- Abstract: In this study, bulk ceramics with general formula Bi{sub 1-y}Sr{sub y}Fe{sub (1-y)(1-x)}Sc{sub (1-y)x}Ti{sub y}O{sub 3} (x = 0-0.2, y = 0.1-0.3 mol%) were prepared by traditional solid-state reaction method. As a comparison, bulk BiFeO{sub 3} (BF) was also sintered by rapid sintering method. Their structural, magnetic, dielectric properties were investigated. X-ray diffraction analysis indicated that apart from a small amount of secondary phase detected in BF, all other samples crystallized in pure perovskite structure and maintained original R3c space group. The room temperature M-H curves were obtained. While BF had a coercive magnetic field (H{sub c}) of 150 Oe, Bi{sub 1-y}Sr{sub y}Fe{sub 1-y}Ti{sub y}O{sub 3} solid solutions had a much larger value (for y = 0.1, 0.2, 0.3, H{sub c} were 4537, 5230 and 3578 Oe, respectively). Sc{sup 3+} substitution decreased the H{sub c} values of these solid solutions remarkably, and resulted in soft magnetic properties, as well as a decrease of the dielectric loss. At 1 MHz, the tan {delta} of Bi{sub 0.7}Sr{sub 0.3}Fe{sub 0.7(1-x)}Sc{sub 0.7x}Ti{sub 0.3}O{sub 3} with x = 0.05, 0.1, 0.15, 0.2 were 0.1545, 0.1078, 0.1046 and 0.1701, respectively.

36 MATERIALS SCIENCE↗

Hybrid catalyst containing nano-sized LaMnO{sub 3} and carbon black for high yield and selective ketonization of n-butanol

Graphical abstract: The performed investigations demonstrated a very high catalytic activity of the synthesized hybrid (LaMnO{sub 3}/carbon black) catalyst towards ketonization of n-butanol. Both selectivity (ca. 60%) and yield (ca. 40%) towards heptanone-4 seem to be very promising especially for conversion run at temperatures close to 480 {sup o}C. These parameters were achieved for the hybrid catalyst containing only 10 weight percents of LaMnO{sub 3}. Research highlights: {yields} A novel biotechnological way of a hybrid carbon-based catalyst fabrication {yields} Effective (high yield and selectivity) n-butanol conversion to heptanone-4. {yields} Nano-sized LaMnO{sub 3} crystallites uniformly distributed in carbon matrix. {yields} Exploitation of Salix viminalis tolerance to heavy metal ions. -- Abstract: An attempt has been made to synthesize a two-component hybrid material for highly selective catalytic ketonization of n-butanol. The perovskite-type oxide nano-crystallites were synthesized in the presence of carbon black particles by thermal transformation of equimolar mixture of lanthanum and manganese hydroxides into the perovskite-type oxide. The two-component material was tested as a catalyst for unconventional conversion of n-butanol to heptanone-4. The catalyst exhibited very high selectivity and yield towards the products, despite low content of LaMnO{sub 3} in the two-component material (less than 10% by weight). The low oxide content led to the reduction of the cost of catalyst fabrication and is compensated by its high dispersion (grains ca. 20-30 nm in diameter) providing high conversion and yield comparable to pure-oxide catalysts. Catalyst fabrication is simple and environment friendly since it does not require organic solvents and excess amount of heavy metals (La and Mn).

36 MATERIALS SCIENCE↗

Properties of electrospun CdS and CdSe filled poly(methyl methacrylate) (PMMA) nanofibres

Graphical abstract: SEM images of CdS/PMMA showing coiling as loading of CdS nanoparticles is increased. Thermal stability is increased with increase in %loading of both CdS and CdSe nanoparticles. Research highlights: {yields} TOPO-capped CdS and HDA-capped CdSe nanoparticles were synthesized and fully characterized. {yields} The nanoparticles were mixed with the polymer, PMMA using electrospinning technique using 2, 5 and 10% weight loadings. {yields} The mixture was spun to produce fibres with optical and thermal properties showing significant change and also the increase in loading causing bending or spiraling. {yields} Both TEM images for nanoparticles and SEM for fibres shows the morphology and sizes of the particles. -- Abstract: Electrospinning technique was used to fabricate poly(methyl methacrylate) (PMMA) fibres incorporating CdS and CdSe quantum dots (nanoparticles). Different nanoparticle loadings (2, 5 and 10 wt% with respect to PMMA) were used and the effect of the quantum dots on the properties of the fibres was studied. The optical properties of the hybrid composite fibres were investigated by photoluminescence and UV-vis spectrophotometry. Scanning electron microscopy (SEM), X-ray diffraction and FTIR spectrophotometry were also used to investigate the morphology and structure of the fibres. The optical studies showed that the size-tunable optical properties can be achieved in the polymer fibres by addition of quantum dots. SEM images showed that the morphologies of the fibres were dependent on the added amounts of quantum dots. A spiral type of morphology was observed with an increase in the concentration of CdS and CdSe nanoparticles. Less beaded structures and bigger diameter fibres were obtained at higher quantum dot concentrations. X-ray diffractometry detected the amorphous peaks of the polymer and even after the quantum dots were added and the FTIR analysis shows that there was no considerable interaction between the quantum dots and the polymer fibres at low concentration of quantum dots however at higher concentrations some interactions were observed which shows that QDs were present on the surfaces of the fibres.

36 MATERIALS SCIENCE↗

Effect of phosphorus incorporation on morphology and optical properties of ZnO nanorods

Graphical abstract: XPS spectra of the P-doped ZnO nanorods: (a) Zn 2p, (b) O 1s, and (c) P 2p spectra. The red curve in c is the Gauss-fitting curve. (d) Raman spectra of P-doped (curve 1) and pure (curve 2) ZnO nanorods. Research highlights: {yields} P-doped ZnO nanorods have been prepared on Si substrates without any catalyst. {yields} The introduction of phosphorus leads to the growth of tapered tip in the nanorods. {yields} The formation of tapered tip is attributed to the relaxation of the lattice strain along the radial direction. {yields} The strong ultraviolet peak is connected with the phosphorus acceptor-related emissions. -- Abstract: Phosphorus-doped ZnO nanorods have been prepared on Si substrates by thermal evaporation process without any catalyst. X-ray photoelectron spectroscopy and Raman spectra indicate that phosphorus entering into ZnO nanorods mainly occupies Zn site rather than O one. The introduction of phosphorus leads to the morphological changes of nanorods from hexagonal tip to tapered one, which should be attributed to the relaxation of the lattice strain caused by phosphorus occupying Zn site along the radial direction. Transmission electron microscopy shows that phosphorus-doped ZnO nanorods still are single crystal and grow along [0 0 0 1] direction. The effect of phosphorous dopant on optical properties of ZnO nanorods also is studied by the temperature-dependent photoluminescence spectra, which indicates that the strong ultraviolet emission is connected with the phosphorus acceptor-related emissions.

36 MATERIALS SCIENCE↗

Luminescence properties of Ca{sub 0.65}La{sub 0.35}F{sub 2.35}:Yb{sup 3+}, Er{sup 3+} with enhanced red emission via upconversion

Graphical abstract: Under 980 nm excitation, Ca{sub 0.65}La{sub 0.35}F{sub 2.35}:20 mol.%Yb{sup 3+}, xEr{sup 3+} showed intense red upconversion luminescence, which was ascribed to {sup 4}F{sub 9/2} {yields} {sup 4}I{sub 15/2} transition of Er{sup 3+}. The ground-state absorption (GSA), excited-state absorption (ESA) and energy transfer (ET) processes between Er{sup 3+}/Yb{sup 3+} ions and Er{sup 3+}/Er{sup 3} ions were involved in the enhanced red emission mechanism. . Research highlights: {yields} Yb{sup 3+}/Er{sup 3+} codoped Ca{sub 0.65}La{sub 0.35}F{sub 2.35} materials with intense red emission via upconversion were prepared by a high temperature solid-state method. {yields} Ca{sub 0.65}La{sub 0.35}F{sub 2.35}:20 mol.%Yb{sup 3+}, xEr{sup 3+} showed intense red upconversion luminescence, which was ascribed to {sup 4}F{sub 9/2} {yields} {sup 4}I{sub 15/2} transition of Er{sup 3+}. {yields} The green and red emissions are two-photon processes, while both energy transfers between Yb{sup 3+}/Er{sup 3+} and Er{sup 3+}/Er{sup 3+} are involved in the red emission mechanism of the Ca{sub 0.65}La{sub 0.35}F{sub 2.35}:20 mol.%Yb{sup 3+}, xEr{sup 3+} materials. -- Abstract: Yb{sup 3+}/Er{sup 3+} codoped Ca{sub 0.65}La{sub 0.35}F{sub 2.35} materials with intense red emission via upconversion were prepared by a high temperature solid-state method. Based on the upconversion luminescence properties investigations, it was found that, under 980 nm excitation, Ca{sub 0.65}La{sub 0.35}F{sub 2.35}:20 mol.%Yb{sup 3+}, xEr{sup 3+} showed intense red upconversion luminescence, which was ascribed to {sup 4}F{sub 9/2} {yields} {sup 4}I{sub 15/2} transition of Er{sup 3+}, although both green and red emissions could be detected. It was also found that the green and red emissions originated the two photon processes, and the ground-state absorption (GSA), excited-state absorption (ESA) and energy transfer (ET) processes between Er{sup 3+}/Yb{sup 3+} ions and Er{sup 3+}/Er{sup 3} ions were involved in the enhanced red emission mechanism.

36 MATERIALS SCIENCE↗