Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “ARSENIDES”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,333 records · Page 74

Microstructure and luminescence of Yb{sup 3+}-doped fluorosilicate glass ceramics

Highlights: Black-Right-Pointing-Pointer Fine nano-SrF{sub 2} lattices were observed in the fluorosilicate glass ceramics. Black-Right-Pointing-Pointer EDXS analysis showed Yb{sup 3+} was enriched into the SrF{sub 2} nanocrystals. Black-Right-Pointing-Pointer That deduced intense cooperative luminescence of the glass ceramics. Black-Right-Pointing-Pointer NIR emissions appeared large bandwidths and long lifetimes simultaneously. Black-Right-Pointing-Pointer Yb{sup 3+} can be an efficient upconversion sensitizer or NIR activator in this host. -- Abstract: Yb{sup 3+}-doped transparent glass ceramics containing cubic SrF{sub 2} nanocrystals were prepared by heat treating the precursor fluorosilicate glass. The precipitated crystals increase in size and the crystallinity decreases with increasing Yb{sup 3+} doping level. With high-resolution transmission electron microscopy and electron diffraction, the nano-sized nature of SrF{sub 2} was clearly observed. Owing to a significant change in the crystal-field effects with Yb{sup 3+} enriching in the SrF{sub 2} phase, the glass ceramics present near infrared emission with large bandwidths and long lifetimes, simultaneously. This indicates the glass ceramics have potential application in the efficient IR lasers pumping by InGaAs diodes. The glass ceramics can also emit blue upconversion luminescence, deriving from Yb{sup 3+} pairs' cooperative luminescence. It suggested that Yb{sup 3+} can be an efficient upconversion sensitizer for other rare earth ions.

36 MATERIALS SCIENCE↗

Temperature dependent photoluminescence investigation of the effect of growth pause induced ripening in InAs/GaAs quantum dot heterostructures

Highlights: Black-Right-Pointing-Pointer Self-assembled InAs/GaAs quantum dots were subjected to growth ripening pause. Black-Right-Pointing-Pointer Samples are structurally and optically characterized. Black-Right-Pointing-Pointer Factors affecting the carrier activation energy have been investigated. -- Abstract: Self-assembled InAs/GaAs quantum dot (QD) heterostructures grown by solid state molecular beam epitaxy (MBE) were subjected to growth ripening pause of comparatively shorter durations (0-50 s) at the growth temperature (520 Degree-Sign C). The islands are found to increase in size with the growth pause and correspondingly their density decreases. Though the photoluminescence spectra of the islands subjected to growth pause is found to follow conventional QD systems, a contradiction is noticed in the calculated values of the activation energy of the dots. We ascribed this contradiction due to the poor crystalline quality of the ripened QDs as a result of desorption and sublimation of indium during the pause at high growth temperature.

36 MATERIALS SCIENCE↗

The impact of monolayer coverage, barrier thickness and growth rate on the thermal stability of photoluminescence of coupled InAs/GaAs quantum dot hetero-structure with quaternary capping of InAlGaAs

Highlight: Black-Right-Pointing-Pointer Coupled InAs/GaAs MQDs with (In{sub 0.21}Al{sub 0.21}Ga{sub 0.58}As + GaAs) caps are considered. Black-Right-Pointing-Pointer Monolayer coverage, barrier thickness and growth rate of the dots are the factors. Black-Right-Pointing-Pointer PL peaks for the samples are within 1.1-1.3 {mu}m; significant for IBSCs and lasers. Black-Right-Pointing-Pointer NPTP (non-resonant multi-phonon assisted tunneling process) effect on FWHM of PL. -- Abstract: The self-assembled InAs/GaAs MQDs are widely investigated for their potential application in optoelectronic devices like lasers and photovoltaics. We have explored the effect of QD growth rate and structural parameters like capping layer thickness on the morphology and optical properties of the MQD heterostructures overgrown with a combination capping of InAlGaAs and GaAs. The growth rate of the seed layers in the MQD samples is also varied to investigate its effect in the vertical stacking of the islands. The change in the morphology and the optical properties of the samples due to variation in growth and structural parameters are explained by the presence of strain in the QD structures, which arises due to lattice mismatch.

36 MATERIALS SCIENCE↗

A detailed investigation on the impact of post-growth annealing on the materials and device characteristics of 35-layer In{sub 0.50}Ga{sub 0.50}As/GaAs quantum dot infrared photodetector with quaternary In{sub 0.21}Al{sub 0.21}Ga{sub 0.58}As capping

Highlights: ► We investigated the effect of ex situ annealing on InGaAs/GaAs QDIP with InAlGaAs layer. ► As-grown defect was removed by using post-growth annealing treatment. ► Increase in the compressive strain due to annealing is calculated from XRD curve. ► Three-fold enhancement in responsivity is observed in the QDIPs annealed at 650 °C. ► Two-fold enhancement in D* is observed sample annealed at 650 °C compared to as grown. -- Abstract: The effect of post-growth rapid thermal annealing on 35-layer In{sub 0.50}Ga{sub 0.50}As/GaAs quantum dot infrared photodetector (QDIP) with quaternary In{sub 0.21}Al{sub 0.21}Ga{sub 0.58}As capping has been investigated. Transmission electron microscopy showed some as-grown defects were removed by post growth annealing treatment. An increase in the compressive strain in the heterostructure due to annealing was identified from X-ray diffraction curve. A two-color photoresponse in the long-wave region (8.5 and 10.2 μm) was observed in both as-grown device and those annealed at 650 °C temperature. A three-fold enhancement in peak responsivity was observed in the QDIPs annealed at 650 °C (1.19 A/W) compared to that in the as-grown (0.34 A/W). Detectivity also increased by two fold from as-grown to 650 °C annealed device. The changes are attributed to the removal of as-grown defects and dislocations during epitaxial growth. These removals changed the confinement potential profile, which resulted in an improvement in the detectivity and responsivity of the annealed sample.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Proposed mechanism to represent the suppression of dark current density by four orders with low energy light ion (H{sup −}) implantation in quaternary alloy-capped InAs/GaAs quantum dot infrared photodetectors

Graphical abstract: - Abstract: Here we propose a carrier transport mechanism for low energy H{sup −} ions implanted InAs/GaAs quantum dot infrared photodetectors supportive of the experimental results obtained. Dark current density suppression of up to four orders was observed in the implanted quantum dot infrared photodetectors, which further demonstrates that they are effectively operational. We concentrated on determining how defect-related material and structural changes attributed to implantation helped in dark current density reduction for InAs/GaAs quantum dot infrared photodetectors. This is the first study to report the electrical carrier transport mechanism of H{sup −} ion-implanted InAs/GaAs quantum dot infrared photodetectors.

36 MATERIALS SCIENCE↗

Ground-state energy trends in single and multilayered coupled InAs/GaAs quantum dots capped with InGaAs layers: Effects of InGaAs layer thickness and annealing temperature

Graphical abstract: - Highlights: • Investigation of ground state energy in single and multi-layered InAs/GaAs QD. • Strain reducing layer (InGaAs) prevents the formation of non-radiative. • Strain reducing layer (InGaAs) is responsible for high activation energy. • Significant deviation from the Varshni model, E(T) = E − αT{sup 2}/T + β. - Abstract: Vertically coupled, multilayered InAs/GaAs quantum dots (QDs) covered with thin InGaAs strain-reducing layers (SRLs) are in demand for various technological applications. We investigated low temperature photoluminescence of single and multilayered structures in which the SRL thickness was varied. The SRL layer was responsible for high activation energies. Deviation of experimental data from the Varshni (1967) model, E(T) = E − ∞ T{sup 2}/T + β, suggests that the InAs-layered QDs have properties different from those in bulk material. Anomalous ground-state peak linewidths (FWHM), especially for annealed multilayer structures, were observed. A ground-state peak blue-shift with a broadened linewidth was also observed. Loss of intensity was detected in samples annealed at 800 °C. Presence of SRLs prevents formation of non-radiative centers under high temperature annealing. The results indicate the potential importance of such structures in optoelectronic applications.

36 MATERIALS SCIENCE↗

Photothermal deflection technique investigation of thermal annealing effects of AlGaAsSb/GaSb laser structure: Non-radiative recombination parameters enhancement

Highlights: • Photothermal deflection technique is performed to mesuaure the nonradiative recombination parameters of AlGaAsSb/GaSb. • After annealing time process, nonradiative recombination parameters of AlGaAs / GaSb have been enhanced. • The largest nonradiative recombination values have been found for AlGaAsSb/GaSb annealed for 60 min - Abstract: Photothermal deflection technique (PTD) is used to investigate the effects of thermal annealing time on nonradiative recombination parameters i.e. nonradiative lifetime of minority carriers, electronic diffusion coefficient, and surface and interface recombination velocity of AlGaAsSb/GaSb laser structure. The extraction of the electronic parameters are performed by PTD technique through extensive modeling by fitting the experimental photothermal signal to the corresponding theoretical ones. We have found that nonradiative recombination parameters have been enhanced by annealing time. These results are very promising for improvement of active layer used for vertical-cavity surface-emitting lasers (VCSELs).

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Selective substitution of Cr in CaFe{sub 4}As{sub 3} and its effect on the spin density wave.

Single crystals of CaCr{sub 0.84}Fe{sub 3.16}As{sub 3}, a Cr substituted analog of CaFe{sub 4}As{sub 3}, were grown from Sn flux and characterized with single crystal neutron diffraction. CaCr{sub 0.84}Fe{sub 3.16}As{sub 3} crystallizes in the orthorhombic space group Pnma with a three-dimensional framework, where Fe, Cr, and As form a covalent channel-like network with Ca{sup 2+} cations residing in the channels. CaCr{sub 0.84}Fe{sub 3.16}As{sub 3} has a unit cell of a = 12.057(4) {angstrom}, b = 3.7374(13) {angstrom}, and c = 11.694(3) {angstrom}, as determined by room temperature single crystal neutron diffraction (R{sub 1} = 0.0747, wR{sub 2} = 0.1825). Structural data was also collected at 10 K. The single crystal neutron data showed that Cr selectively occupies a particular metal site, Fe(4). The antiferromagnetic transition associated with spin density wave (SDW) in the parent compound is preserved and shifts from 96 to 103 K with the selective Cr doping. Moessbauer, magnetic, and electrical resistivity measurements are reported.

36 MATERIALS SCIENCE↗

Materials Chemistry of BaFe2As2: A Model Platform for Unconventional Superconductivity

BaFe{sub 2}As{sub 2} is the parent compound of a family of unconventional superconductors with critical temperatures approaching 40 K. BaFe{sub 2}As{sub 2} is structurally simple, available as high-quality large crystals, can be both hole and electron doped, and is amenable to first-principles electronic structure calculations. BaFe{sub 2}As{sub 2} has a rich and flexible materials chemistry that makes it an ideal model platform for the study of unconventional superconductivity. The key properties of this family of materials are briefly reviewed.

36 MATERIALS SCIENCE↗

Nanometer-scale sharpness in corner-overgrown heterostructures

A corner-overgrown GaAs/AlGaAs heterostructure is investigated with transmission and scanning transmission electron microscopy, demonstrating self-limiting growth of an extremely sharp corner profile 3.5 nm wide. In the AlGaAs layers, we observe self-ordered diagonal stripes, precipitating exactly at the corner, which show increased Al content measured with x-ray spectroscopy. A quantitative model for self-limited growth is adapted to the present case of faceted molecular beam epitaxial growth, and the corner sharpness is discussed in relation to quantum confined structures. We note that corner overgrowth maintains nanometer sharpness after microns of growth, allowing corner-shaped nanostructures.

36 MATERIALS SCIENCE↗

Deep traps in GaAs/InGaAs quantum wells and quantum dots, studied by noise spectroscopy

Remotely doped In{sub 0.35}Ga{sub 0.65}As layers of different coverages 6, 9, 11, and 13 ML were grown by molecular beam epitaxy on (100) GaAs. Quantum dot (QD) nucleation was observed in situ by reflection high-energy electron diffraction at 8 ML growth of In{sub 0.35}Ga{sub 0.65}As, while for 6 ML, only two-dimensional (2D) growth was observed. Atomic force microscopy, low temperature photoluminescence, and Hall effect measurements confirmed this transition from 2D to three-dimensional growth. Low-frequency noise studies have been performed to probe defects in such heterostructures throughout the transition from a highly strained quantum well to QDs. Results were compared to a bulk n-type GaAs reference sample. We revealed three main defects in GaAs with activation energies of 0.8, 0.54, and 0.35 eV. These defects with the same activation energies were found in all samples. However, structures containing In{sub 0.35}Ga{sub 0.65}As QDs show an additional peak at low temperatures due to the presence of defects which are not observed for reference GaAs and quantum well samples. Detailed analysis shows that for 9 and 11 ML In{sub 0.35}Ga{sub 0.65}As QD samples this peak corresponds to the well known M1 defect in GaAs with an activation energy of 0.18 eV, while for a coverage of 13 ML the defect was found to have an activation energy of 0.12 eV. All defects were characterized quantitatively in terms of their activation energy, capture cross section, and density. These studies indicate that noise spectroscopy is a very sensitive tool for electronic material characterization on the nanoscale.

36 MATERIALS SCIENCE↗

Structural characterization of GaAs and InAs nanowires by means of Raman spectroscopy

We report Raman studies of GaAs and InAs nanowires (NWs) grown on SiO{sub 2} and GaAs surfaces by means of catalyst-assisted molecular beam epitaxy. We have investigated several tens of NWs grown using either Mn or Au as a catalyst. The LO and TO phonon lines of the NWs showed an energy downshift and a broadening as compared to the lines usually observed in the corresponding bulk materials. A doublet is sometimes observed in the LO region due to the observation of a signal attributed to the surface optical (SO) phonon. The energy position of the SO phonon agrees with the values expected considering the section diameter of the NWs. LO and TO downshifts are due to the presence of structural defects within the NWs. The larger the energy downshift, the smaller the dimension of the defect-free regions. The results demonstrate that different catalysts provide wires with comparable crystal quality. The measurements also point out that differences in defect density can be found in wires coming from the same batch indicating that a substantial effort will be needed to obtain high homogeneities of the NW quality.

36 MATERIALS SCIENCE↗

Impact of carrier localization on the photoluminescence characteristics of (Ga,In)(N,As) and (Ga,In)(N,As,Sb) quantum wells

Using photoluminescence (PL) spectroscopy, we carry out a comparative study of the optical properties of (Ga,In)(N,As) and (Ga,In)(N,As,Sb) quantum wells. The incorporation of Sb into (Ga,In)(N,As) results in a reduced quantum efficiency at low temperatures but an improved one at room temperature (RT). A PL line shape analysis as well as the temperature dependence of the PL peak energy reveals the existence of band-tail localized states in both material systems. The carrier localization energy is larger for (Ga,In)(N,As,Sb) than for (Ga,In)(N,As), leading to a longer radiative lifetime and thus a reduced quantum efficiency at low temperatures for the former material. The thermal quenching of the quantum efficiency is analyzed by a rate equation model, which shows that the density of nonradiative centers is reduced in (Ga,In)(N,As,Sb) resulting in an enhanced quantum efficiency at RT.

36 MATERIALS SCIENCE↗

Epitaxial growth of quantum rods with high aspect ratio and compositional contrast

The epitaxial growth of quantum rods (QRs) on GaAs was investigated. It was found that GaAs thickness in the GaAs/InAs superlattice used for QR formation plays a key role in improving the QR structural properties. Increasing the GaAs thickness results in both an increased In compositional contrast between the QRs and surrounding layer, and an increased QR length. QRs with an aspect ratio of up to 10 were obtained, representing quasiquantum wires in a GaAs matrix. Due to modified confinement and strain potential, such nanostructure is promising for controlling gain polarization.

36 MATERIALS SCIENCE↗

Single quantum dot emission by nanoscale selective growth of InAs on GaAs: A bottom-up approach

We report on single dot microphotoluminescence ({mu}PL) emission at low temperature and low power from InAs dots grown by molecular beam epitaxy in nanoscale holes of a SiO{sub 2} mask deposited on GaAs(001). By comparing atomic force microscopy measurements with {mu}PL data, we show that the dot sizes inside the nanoholes are smaller than those of the dots nucleated on the extended GaAs surface. PL of dots spans a wide energy range depending on their size and on the thickness and composition of the InGaAs capping layer. Time-resolved PL experiments demonstrate a negligible loss of radiative recombination efficiency, proving highly effective in the site-controlled dot nucleation.

36 MATERIALS SCIENCE↗

Uniform InGaAs quantum dot arrays fabricated using nanosphere lithography

We demonstrate the fabrication of optically active uniform InGaAs quantum dot arrays by combining nanosphere lithography and bromine ion-beam-assisted etching on a single InGaAs/GaAs quantum well. A wide range of lateral dot sizes was achieved from an oxygen plasma nanosphere resizing process. The increased lateral confinement of carriers in the dots results in low temperature photoluminescence blueshifts from 0.5 to 11 meV. Additional quantization was achieved using a selective wet-etch process. Our model suggests the presence of a 70 nm dead layer in the outer InGaAs radial edge, which we believe to be a result of defects and dislocations introduced during the dry-etch process.

36 MATERIALS SCIENCE↗

X-ray reflectivity and total reflection x-ray fluorescence study of surface oxide evolution in a GaAs/AlAs multilayer system

Modifications of GaAs/air interface under x-ray exposure have been investigated by means of x-ray reflectometry (XRR). For this purpose a GaAs/AlAs multilayer system was continuously monitored for 90 h while acquiring XRR profiles. Three different starting models for the oxide/contaminants layer were tested for the analysis of XRR data and discussed. The main effect of x-ray exposure, revealed by the three different approaches, is an increase in the thickness of the gallium and arsenic oxides until a saturation value (about 3.0 nm) is reached after about 50 h. Total reflection x-ray fluorescence analysis performed on a couple of twin samples, either irradiated and nonirradiated, confirms that the oxidation process is promoted by x-ray exposure and indicates the presence of a richer As oxide phase at the surface of the x-ray irradiated samples.

36 MATERIALS SCIENCE↗