Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “ARCS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,333 records · Page 74
All sourcesNASA NTRSDOE OSTI
NASA NTRS1987

The linear filaments of the radio arc near the Galactic center

High-resolution radio continuum VLA images of a segment of the Galactic center arc centered at G0.16-0.15 at wavelengths of both 6 and 20 cm are presented. In this segment, the highest multiplicity of filaments, the largest degree of linear polarization, and a maximum rotation measure of -5500 rad/sq m between wavelengths 6.166 and 6.363 cm are found. The large 'helical segments' which surround the filamentary system are also shown and discussed. Based on a number of intriguing characteristics of the filamentary system, including the helical component and possible twisting of some of the filaments, a picture is considered in which the geometry of the magnetic structure is that of a cylindrically symmetric, force-free field anchored to the halo of the Galaxy. An analogy with solar flare filaments is used to discuss some aspects of the Galactic center filaments.

Yusef-Zadeh, Farhad↗
NASA NTRS1987

Design and performance of controlled-diffusion stator compared with original double-circular-arc stator

The capabilities of two stators, one with controlled-diffusion (CD) blade sections and one with double-circular-arc (DCA) blade sections, were compared. A CD stator was designed and tested that had the same chord length but half the blades of the DCA stator. The same fan rotor (tip speed, 429 m/sec; pressure ratio, 1.65) was used with each stator row. The design and analysis system is briefly described. The overall stage and rotor performances with each stator are compared, as are selected blade element data. The minimum overall efficiency decrement across the stator was approximately 1 percentage point greater with the CD blade sections than with the DCA blade sections.

Gelder, Thomas F.↗
NASA NTRS1988

Composite monolayer fabrication by an arc-spray process

A single layer (monotape) technique for fabricating complex high-temperature tungsten-fiber-reinforced superalloy composites is proposed. The fabrication of sheets of arc-sprayed monotape 38 cm wide and 122 cm long has been demonstrated. Composites fabricated using the method are shown to have equal tensile strength and a cleaner matrix than composites fabricated from powder metal cloth monotapes, and the present technique is less expensive than the powder metal fabrication techniques.

Westfall, Leonard J.↗
NASA NTRS1989

Arc-Light Reflector For Television Weld Monitoring

Conical, stainless-steel mirror attached to end of welding torch improves distribution of light on work-piece as welding monitored through torch by television. Television monitoring protects operators from intense arc light and facilitates automated welding. Simple, small, and easy to install and remove, mirror relatively nonintrusive.

Gordon, Stephen S.↗
NASA NTRS1989

Multihole Arc-Welding Orifice

Modified orifice for variable-polarity plasma-arc welding directs welding plume so it creates clean, even welds on both Inconel(R) and aluminum alloys. Includes eight holes to relieve back pressure in plasma. Quality of welds on ferrous and nonferrous alloys improved as result.

Swaim, Benji D.↗
NASA NTRS1988

Exact solutions and low-frequency instability of the adiabatic auroral arc model

The adiabatic auroral arc model couples a kinetic theory parallel current driven by mirror forces to horizontal ionospheric currents; the resulting equations are nonlinear. Some exact stationary solutions to these equations, some of them based on the Liouville equation, are developed, with both latitudinal and longitudinal spatial variations. These Liouville equation exact solutions are related to stability boundaries of low-frequency instabilities such as Kelvin-Helmholtz, as shown by a study of a simplified model.

Cornwall, John M.↗
NASA NTRS1989

Luminous arcs in clusters of galaxies

Observations are reported of what appears to be a new class of spatially coherent extragalactic features having, in the two most compelling known examples, the following joint properties: location in clusters of galaxies, narrow arclike shape, enormous apparent length, and situation of center of curvature toward both a cD galaxy and the apparent center of gravity of the cluster. The principal available facts concerning the arcs are presented and a variety of interpretations are briefly discussed. The weight of evidence seems to favor the interpretation that these features are images of more distant objects produced by the gravitational field of the intervening clusters.

Lynds, Roger↗
NASA NTRS1989

ARCS 3 ionospheric artificial argon ion beam injections - Waves near the heavy ion gyrofrequencies

Low-frequency electric field data below the proton gyrofrequency are presented for the duration of the argon ion beam experiment conducted as part of the Argon Release for Controlled Studies (ARCS) program. An argon ion beam was injected from the subpayload antiparallel or perpendicular to the magnetic field at altitudes from 250 to 405 km. During the injections, the wave spectra were broadband near the subpayload and narrow-band near heavy ion gyrofrequencies at perpendicular separation distances between 42 and 254 m. It is suggested that the narrow-band waves are associated with both the perpendicular argon ion beam and an unexpected flux of low-energy ions which peaked in energy near 15 eV and pitch angle near 90 deg with respect to the magnetic field.

Erlandson, R. E.↗
NASA NTRS1990

Physics Of Variable-Polarity Plasma Arc Welding

Report describes experimental study of some of the physical and chemical effects that occur during variable-polarity plasma arc (VPPA) keyhole welding of 2219 aluminum alloy. Comprised three major programs: (1) determination of effects of chemical additions (i.e., impurities) on structure and shape of bead and keyhole; (2) determination of flow in regions surrounding keyhole; (3) development of analog used easily to study flow in keyhole region.

Walsh, Daniel W.↗
NASA NTRS1990

Internal Filler-Wire Feed For Arc Welding

Tungsten electrode for gas/tungsten arc welding contains lengthwise channel for feeding filler wire to weld joint. Channel makes it unnecessary to feed wire through guides outside electrode, conserving valuable space near weld and protects wire from deformation by contact with other parts in vicinity of weld. Helpful in robotic or automatic welding.

Morgan, Gene E.↗
NASA NTRS1990

Etching Electrode Prevents Arcs

Wooden part replaces stainless-steel part. Disposable electrode for etching Inco(R) 625 (or equivalent) alloy works better than previous, more expensive version. Size and shape of electrode makes it easier than before to etch in narrow grooves and other confined spaces. Designed to prevent arcing, which damages metal workpiece.

Trost, Michael J.↗
NASA NTRS1990

Analysis Of Used Arc-Jet Electrodes

Report discusses conditions of electrodes used in arc-jet engine. Electrodes examined in effort to determine causes of erosion and to develop recommendations for improved electrode designs yielding longer operating lives.

Pivirotto, Thomas J.↗
NASA NTRS1989

Demonstration of the feasibility of laser induced fluorescence for arc jet flow diagnostics

Laser Induced Fluorescence (LIF) studies are carried out on nitric oxide and oxygen molecules in the arc jet flows at the NASA Johnson Space Center Reentry Testing Facility. Measurements are taken in the free stream and from a blunt body shock layer. Tests are performed under different flow conditions to determine the feasibility and sensitivity of the LIF technique for various species. This is developed as a part of high enthalpy flow diagnostics and will be useful to elucidate the rotational and vibrational temperatures. Adequate sensitivity for the detection of O(2) and NO is demonstrated. Proposed improvements of the existing system are presented.

Arepalli, Sivaram↗
NASA NTRS1989

The effect of impurity gasses on variable polarity plasma arc welded 2219 aluminum

Variable polarity plasma arc (VPPA) welding has been used with considerable success by NASA for the welds on the Space Shuttle External Tank as well as by others concerned with high quality welded structures. The effects of gaseous contaminants on the appearance of VPPA welds on 2219 aluminum are examined so that a welder can recognize that such contamination is present and take corrective measures. There are many possible sources of such contamination including, contaminated gas bottles, leaks in the gas plumbing, inadequate shield gas flow, condensed moisture in the gas lines or torch body, or excessive contaminants on the workpiece. The gasses chosen for study in the program were nitrogen, oxygen, methane, and hydrogen. Welds were made in a carefully controlled environment and comparisons were made between welds with various levels of these contaminants and welds made with research purity (99.9999 percent) gasses. Photographs of the weld front and backside as well as polished and etched cross sections are presented.

Mcclure, John C.↗
NASA NTRS1990

A numerical parametric study of a scramjet inlet in a Mach 6 arc heated test facility

A numerical study of the NASA Langley Arc Heated Scramjet Test Facility (AHSTF) is reported. The facility test flow through the Mach 6 quasi-two-dimensional nozzle was computed, and the flow through the Langley parametric inlet was calculated using different regions of the computed facility nozzle exit flow as inflow, exploring in more detail the effect of boundary layer ingestion on inlet performance. The potential advantage of using a quasi-two-dimensional nozzle in the Langley AHSTF versus the square cross-sectioned nozzle currently used for Scramujet engine tests is explored in terms of resulting inlet performance.

Sekar, B.↗
NASA NTRS1990

Application of Laser Induced Fluorescence for flow diagnostics in arc jets

Laser Induced Fluorescence (LIF) studies are carried out on copper atoms, nitric oxide and oxygen molecules in the arc jet flows at the NASA Johnson Space Center Reentry Simulation Testing Facility. Measurements are taken in the free stream and from a blunt body shock layer. Tests are performed under different flow conditions to determine the feasibility and sensitivity of the LIF technique for various species. The LIF technique is developed as a part of high enthalpy flow diagnostics and will be useful to elucidate the rotational and vibrational temperatures. Adequate sensitivity for the detection of O2 and NO is demonstrated. Preliminary experiments for temperature and velocity measurements using copper as a tracer material are shown to be a useful new application of the laser resonant Doppler scattering technique.

Arepalli, Sivaram↗
NASA NTRS1990

Survey of measurements of flow properties in arc jets

This paper reviews techniques for determining flow properties in low density arc jets used for materials and structures testing. Properties measured include flow total enthalpy, pressures, heat fluxes, static temperatures, electron density, species concentrations, and flow velocity. The probe techniques covered are pressure, heat flux, electrostatic, and mass sampling. Nonintrusive techniques include emission spectroscopy, laser-induced fluorescence, laser Thomson scattering, and Raman scattering. It is concluded that several techniques must be used in a single facility to obtain all of the flow field properties necessary to predict heat fluxes in a nonequilibrium expansion.

Scott, Carl D.↗