Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “waveguide”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,315 records · Page 73

Pulse Shaping in 1D Elastic Waveguides for Shock Testing

Mechanical shock events experienced by electronics systems can be reproduced in the laboratory using Hopkinson bar tests. In these tests a projectile strikes an bar, creating a pulse which travels through the bar into the system. The quality of these tests depends on the closeness of the shape of the incident pulse to the shape specified for the test. This paper introduces a new way to control the shape of the incoming pulse, through the use of elastic metamaterial concepts. Two dispersion-modifying material concepts, phononic crystals, and local resonators, are examined for their wave shaping capabilities in 1D elastic waveguides. They are then evaluated using a transfer matrix method to determine the output wave shape in the time domain. The concepts are then optimized for various pulse shapes, showing that they are most effective when they are tuned to introduce dispersion near the fundamental frequency of the incident wave.

DeLima, Washington↗

Design and fabrication of the waveguide Iris couplers for the Spallation Neutron Source drift tube linac

The Spallation Neutron Source (SNS) employs six cavities in the Drift Tube Linac (DTL) section to accelerate the H- ion beam to 87MeV. Each cavity is energized by a 2.5MW peak power klystron at 402.5MHz using rapid tapered waveguide iris couplers. All six original iris couplers have been in operation without replacement for over two decades. The increased RF power demands of the Proton Power Upgrade (PPU) project and operational problems, including arcing, temperature excursions, and vacuum bursts, have prompted the development of new iris coupler spares. The original iris couplers were made of GlidCop material, which is known to be mechanically strong and thermally stable, but is porous, expensive, and difficult to use in fabrication. To overcome these problems, the new spare couplers use Oxygen-Free Copper (OFC) and stainless steel (SS). This paper will discuss the mechanical, thermal and RF design, as well as challenges in the final coupler fabrication.

Lee, Sung-Woo↗

Guiding and Ionization Blueshift in Ablative Capillary Waveguide Accelerators

Laser wakefield acceleration (LWFA) in plasmas has been demonstrated with gradients which are orders of magnitude greater than the limit on conventional Radio Frequency accelerators. However, the acceleration length is limited by two factors, the dephasing length and the Rayleigh range of the laser pulse. Dephasing length is the distance in which electrons overtake the laser pulse and can be increased by decreasing plasma density. Alternatively the interaction length can be extended by orders of magnitude by using ablative wall discharge capillary targets, in which a plasma is preformed with a transverse density profile capable of guiding the focused laser. We have demonstrated guiding of high intensity laser pulses from the HERCULES laser over 3 cm for powers up to 35 TW. The quality of the laser spot can be retained and the intensity remains high even at the exit of the capillary. The transmitted laser spectrum shows blueshifting due to field ionization by the laser pulse. This ionization might enhance electron injection at low electron density for LWFA GeV accelerators. The field ionization affects carbon atoms and ions from the ablated capillary, which are not present in hydrogen-filled capillaries. This creates an additional challenge to guiding compared to hydrogen-filled capillaries. However, the setup and materials are easier to come by. The use of these capillary targets may also be of interest to other high intensity laser-plasma interactions requiring long interaction lengths such as high harmonic generation from gases and plasmas, or x-ray lasing in underdense plasmas.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Comment on 'The single-wall carbon nanotube waveguides and excitation of their {sigma}+{pi} plasmons by an electron beam' [Phys. Plasmas 16, 022108 (2009)]

In a recent article [M. Nejati, C. Javaherian, B. Shokri, and B. Jazi, Phys. Plasmas 16, 022108 (2009)], Nejati et al. studied the propagation of plasma wave in the single-wall carbon nanotubes in the presence of the electron beam and showed that the frequency of the {sigma}+{pi} plasma wave strongly depends on the nanotube radius in the short-wavelength region. Here we derive the correct form of the dispersion relation for the transverse magnetic wave in the system and show that the frequency of the plasma wave is quite sensitive to the radius of the tube in the long-wavelength limit.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Study of geometrical effects on the characteristics of metallic double-walled carbon nanotube waveguides through quantum hydrodynamics

By assuming the metallic double-walled carbon nanotubes as two coaxial free electron gas layers with linearized hydrodynamic model, it is shown that surface plasmons coupled with electromagnetic fields can be excited on a metallic double-walled carbon nanotube and propagate along its axis. Dispersion relations of surface plasmons for E-type and B-type waves in various inner-outer radii and various interlayer distances for long metallic double-walled carbon nanotubes are obtained.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Raman Amplification and Tunable Pulse Delays in Silicon Waveguides

The nonlinear process of stimulated Raman scattering is important for silicon photonics as it enables optical amplification and lasing. However, generally employed numerical approaches provide very little insight into the contribution of different silicon Raman amplifier (SRA) parameters. In this paper, we solve the coupled pump-signal equations analytically and derive an exact formula for the envelope of a signal pulse when picosecond optical pulses are amplified inside a SRA pumped by a continuous-wave laser beam. Our solution is valid for an arbitrary pulse shape and fully accounts for the Raman gain-dispersion effects, including temporal broadening and group-velocity reduction. Our results are useful for optimizing the performance of SRAs and for engineering controllable signal delays.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Laser wakefield acceleration of electron beams beyond 1 GeV from an ablative capillary discharge waveguide

Laser wakefield acceleration of electrons well beyond 1 GeV and optical guiding of ultraintense laser pulses of peak powers up to 160 TW over a 4-cm long ablative capillary discharge plasma channel were experimentally demonstrated. Electron beams, with energies up to 1.8 GeV, were generated by using the 130 TW, 55 fs driving laser pulses. A comparison of oxygen-containing acrylic resin (C:O:H = 4:2:7) capillary and no oxygen-containing polyethylene (C:O:H = 1:0:2) capillary measurements suggests that the injection of electron into the laser wakefield is assisted by the ionization of oxygen K-shell electrons.

43 PARTICLE ACCELERATORS↗

Analysis of saturation phenomena in Cerenkov free-electron lasers with a planar waveguide

In this paper, the operation of the stimulated emission in Cerenkov free-electron laser (CFEL) is studied on the basis of the modulations of electron velocity and density by the electromagnetic (EM) field. The influence of the electron relaxation, due to mutual electrons collisions, on the electron dynamics is taken into account. We investigate the growth characteristics of Cerenkov laser operating in the small-signal and saturation regimes. In the saturation regime, the effect of velocity reduction of the electron beam on the gain dynamics is demonstrated. We also show that our results match with those of other well-known treatments in the small-signal gain limit.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Transport properties of MOPhC/metal one-way waveguide

We have demonstrated numerically that the interface between metal and uniformly magnetized 2D photonic crystal(PC) fabricated from a transparent dielectric magneto-optic(MO) material possesses a one-way frequency range where only a forward propagating surface plasmon polariton mode is allowed to propagate. By using a simple theoretical model we have shown that nonreciprocity is introduced by the MO properties of the PC. Transport properties of the structures within this frequency range have been investigated by FDTD method which enables to calculating propagation of EM waves through media with full tensorial MO permittivity. We found that in the presence of a time-dependent external magnetic field interesting features associated with the redistribution of the EM field appear.

36 MATERIALS SCIENCE↗

On the small-signal theory of stimulated Cherenkov emission in dielectric-lined waveguides

The growth characteristics of a two-dimensional Cherenkov free-electron laser (CFEL) in the small-signal low gain regime are studied for both single-electron and collective models. In the single-electron regime, for a thick enough beam, we prove that the gain of the CFEL can be increased by a factor of 2 than that obtained for an infinitely thin electron beam. Thus, the Cherenkov laser should be considered as a hybrid longitudinal/transverse free-electron laser device in general. In the collective-regime, we demonstrate the damping effects of Coulomb collisions among electrons on the amplification characteristics of a Cherenkov laser.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Waveguide slot-excited long racetrack electron cyclotron resonance plasma source for roll-to-roll (scanning) processing

We present a SLot-excited ANtenna (SLAN) long racetrack ECR plasma source that is utilized for roll-to-roll plasma processing such as thin film encapsulation of large-area OLED (organic light emitting diode) panel or modification of fabric surfaces. This source is designed to be long, and to operate under high density uniform plasma with sub-milli-torr pressures. The above features are accomplished by a slot-excited long racetrack resonator with a toroidal geometry of magnetic field ECR configuration, and reinforced microwave electric distributions along the central region of plasma chamber. Also, a new feature has been added to the source. This is to employ a tail plunger, which allows the microwave electric field and the uniformity of the plasma profile to be easily adjustable. We have successfully generated Ar plasmas operating with the microwave power of 0.5–3 kW in the pressure range of 0.2–10 mTorr. The plasma is uniform (<10%) in the direction of the straight track and has a Gaussian profile in the roll-to-roll (scanning) direction. In addition, it is shown that the tail plunger could adjust the plasma profile in order to obtain plasma uniformity. Furthermore, based on the results, we suggest a newly designed up-scaled racetrack-SLAN source.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Photonic crystal light emitting diode based on Er and Si nanoclusters co-doped slot waveguide

We report on the design, fabrication, and electro-optical characterization of a light emitting device operating at 1.54 μm, whose active layer consists of silicon oxide containing Er-doped Si nanoclusters. A photonic crystal (PhC) is fabricated on the top-electrode to enhance the light extraction in the vertical direction, and thus the external efficiency of the device. This occurs if a photonic mode of the PhC slab is resonant with the Er emission energy, as confirmed by theoretical calculations and experimental analyses. We measure an increase of the extraction efficiency by a factor of 3 with a high directionality of light emission in a narrow vertical cone. External quantum efficiency and power efficiency are among the highest reported for this kind of material. These results are important for the realization of CMOS-compatible efficient light emitters at telecom wavelengths.

36 MATERIALS SCIENCE↗