Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “solid solution”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,315 records · Page 73

Synthesis and characterization of Bi{sub 1−x}La{sub x}PO{sub 4} nano-rods

Monoclinic form of BiPO{sub 4} phase has been prepared based on the reaction of Bi{sup 3+} and PO{sub 4}{sup 3−} ions in ethylene glycol medium at 185°C. Monoclinic BiPO{sub 4} forms random solid solutions with lanthanide phosphates having monoclinic structure as confirmed by XRD and {sup 31}P solid state nuclear magnetic resonance studies.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Phase transformations in Cd–Ni nanostructured system at elevated temperatures

Using X-ray diffraction (both in vacuum and in air), derivatomass-spectrometry and thermo-programmed oxidation, phase transformations in nanostructured Cd–Ni system occurring while heating up 720 °C were described. These metal powders were obtained by joint reduction from aqueous solutions of salts with hydrazine. When study their composition, earlier unknown phases were detected (intermetallide CdNi{sub 3} and solid solution Cd{sub x}Ni{sub 1–x} with face centered cubic structure) and among the known intermetallides (Cd{sub 5}Ni and CdNi), only Cd{sub 5}Ni was found. As a consequence, phase transformations in the obtained nanostructured powders were remarkably different from those present on the Cd–Ni phase diagram. The intermediates and FCC phase decompose independently with formation of individual initial components (Cd and Ni) without intermediate product. At relatively high Cd concentration in the system, intermediate CdNi{sub 3} phase formation from Cd{sub 5}Ni and Cd{sub x}Ni{sub 1–x} phases, which are polar opposites in composition, is possible. The decomposition temperatures of Cd{sub 5}Ni and melting point of Cd in the nanostructured state were lower than those specified by the phase diagram by 170 and 70 °C, respectively, which well corresponded to the concept of effective (high) temperatures attributed to the nanostructured systems due to the energy saturation of the con stituent nanocrystallites.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Leaching behaviour of low Ca:Si ratio CaO–SiO{sub 2}–H{sub 2}O systems

A dynamic leaching study of the dissolution of low calcium to silicon ratio (C/S) calcium–silicate–hydrate (C–S–H) systems with initial C/S ranging from 0.2 to 0.6 has been undertaken. Dissolution was studied in demineralised water at 25 °C to a degree of leaching of 2.5 m{sup 3} kg{sup −1}. These C–S–H gels show remarkably similar behaviour during early leaching stages, giving an equilibrated pH of ~ 9.9 and a solution phase C/S of ~ 0.29. Over longer times, C–S–H gels with C/S > 0.29 evolve, on leaching, towards a congruent dissolution point with a solid C/S close to 0.84 (consistent with tobermorite) and pH ~ 10.8. C–S–H gels with C/S < 0.29 become increasingly silica-rich on leaching but maintain an alkaline pH > 9.5 down to at least C/S = 0.07 (the lowest ratio reached). For C/S < 0.7, chemical modelling and X-ray diffraction data support an explanation of the incongruent dissolution behaviour of the low C/S C–S–H gels based on the congruent dissolution of distinct amorphous silica and tobermorite-like C–S–H phases. Above C/S of 0.7, the dissolution data are well described by an ideal solid solution model for the C–S–H phases. These results are of relevance to the consideration of the disposal of silica-rich vitrified intermediate-level radioactive wastes in cement-based concepts for geological disposal, where maintenance of alkaline pH values forms a key component of the chemical barrier to radionuclide migration. The implications are that the long-term pH buffering capacity provided by cementitious backfill materials would not be significantly affected by interactions with silica-rich wasteforms, which may lower the net C/S ratio of C–S–H phases, due to the natural tendency of these systems to restore congruent dissolution at pH 10.8.

36 MATERIALS SCIENCE↗

Structure and Properties Investigation of Mixed Oxides YCr{sub 1-x}Fe{sub x}O{sub 3}(0<=x<=1)

YCr{sub 1-x}Fe{sub x}O{sub 3} materials with x = 0; 0.125; 0.25; 0.33; 0.5; 0.67; 0.75; 0.875 and 1 have been prepared by solution combustion method followed by thermal treatment at 800 deg. C in air. X-ray powder diffraction spectra of samples confirmed the formation of solid solutions within the whole concentration interval. All spectra were successfully indexed in orthorhombic Pnma space group. Neutron diffraction measurements at room temperature have confirmed that some of the samples studied are antiferromagnetically ordered. This is consistent with the asymptotic Curie temperatures determined from the dependence of the reverse magnetic susceptibility on temperature. The effective magnetic moments were determined from the Rietveld refinement of the neutron powder diffraction data.

36 MATERIALS SCIENCE↗

Superior High-Temperature Strength in a Supersaturated Refractory High-Entropy Alloy

Refractory high-entropy alloys (RHEA) show promising applications at high temperatures. However, achieving high strengths at elevated temperatures above 1,173K is still challenging due to heat softening. Using intrinsic material characteristics as the alloy-design principles, a single-phase body-centered-cubic (BCC) CrMoNbV RHEA with high-temperature strengths (beyond 1,000 MPa at 1,273 K) is designed, superior to other reported RHEAs as well as conventional superalloys. The origin of the high-temperature strength is revealed by in-situ neutron scattering, transmission-electron microscopy, and first-principles calculations. The CrMoNbV’s elevated-temperature strength retention up to 1,273 K arises from its large atomic-size and elastic-modulus mismatches, the insensitive temperature dependence of elastic constants, and the dominance of non-screw character dislocations caused by the strong solute pinning, which makes the solid-solution strengthening pronounced. The alloy-design principles and the insights in this study pave the way to design RHEAs with outstanding high-temperature strength.

36 MATERIALS SCIENCE↗

The impact of feedstock size and composition on the hydrothermal growth of (U,Th)O 2

Bulk crystal growth of refractory oxides requires unique approaches, and the U x Th 1-x O 2 solid solution is no exception. Hydrothermal transport reactions of U 0.1 Th 0.9 O 2 onto ThO 2 seeds with feedstocks comprised of U 0.1 Th 0.9 O 2 or mixtures of UO 2 and ThO 2 with a nominal composition of U 0.1 Th 0.9 O 2 are investigated with µ-Raman spectroscopy and X-ray fluorescence. In each case, the trends in stoichiometry as a function of distance from the seed are analyzed and the deviations from the nominal stoichiometry discussed. When the feedstock is composed of mixed oxides, the particle surface area’s influence on the feedstock dissolution rate is the dominant factor and can produce U-rich stoichiometries as high as U 0.75 Th 0.25 O 2 . When composed solely of U 0.1 Th 0.9 O 2 , the total growth amount depends on the particle size, but the obtained stoichiometry is the product of differing solubilities. Although the U0.1Th0.9O 2 feedstock produces the most homogeneous growth, the ending growth of the smallest particle UO 2 /ThO 2 mixture yields the stoichiometry closest to U 0.1 Th 0.9 O 2 . How to obtain desired stoichiometries from mixtures by matching the particle size and solubilities is briefly discussed.

36 MATERIALS SCIENCE↗

Experimental determination of zirconium hydride precipitation and dissolution in zirconium alloy

In this study, synchrotron X-Ray transmission diffraction experiments were performed to study hydride precipitation and dissolution in the zirconium/zirconium-hydride system while it occurs. Evidence was found that the hysteresis between the terminal solid solubility for precipitation and dissolution is not observed when hydride particles are already present at the beginning of sample cooldown. Additionally, experimental results show that, during a temperature hold, the concentration of hydrogen in solid solution becomes lower than the terminal solid solubility for hydride precipitation and eventually reaches the terminal solid solubility for hydride dissolution, indicating that the latter is the actual thermodynamic solubility limit.

36 MATERIALS SCIENCE↗

Composition-dependent apparent activation-energy and sluggish grain-growth in high entropy alloys

Experimental results reveal that the apparent activation-energy for grain-growth in an fcc-based Al x CoCrFeNi high entropy alloy (HEA) system increases from 179 to 486 kJ/mol when the Al content increases from x = 0.1 to 0.3. These unexpectedly high apparent activation-energy values can be potentially attributed to solute clustering within the fcc solid-solution phase that develops with increasing Al content in this HEA. Detailed microstructural analysis using atom-probe tomography and density functional theory (DFT) calculations strongly indicate the presence of such nanoscale clusters. This phenomenon can change grain-growth from a classical solute-drag regime to a much more sluggish cluster-drag based mechanism in these HEAs.

36 MATERIALS SCIENCE↗

Microstructure evolution in the fusion zone of laser-welded Mg–Gd–Y–Zr alloy during solution and aging treatment

The microstructure evolution in the fusion zone of laser-welded Mg-Gd-Y-Zr alloy during solution and aging treatment is investigated. The morphology of the Mg{sub 24}(Gd,Y){sub 5} in the divorced eutectic at the grain boundary transforms from a continuous network to disconnected and fragmentized islands and then to spheroidal particles before complete dissolution during the solution treatment at 430 °C. During the subsequent aging treatment at 225 °C, the precipitation sequence in the fusion zone follows the order of supersaturated solid solution (SSSS) → βʺ(D0{sub 19}) → βʹ(cbco) → β{sub 1}(fcc) → β(fcc). High-density precipitates are present at the original grain boundaries of the fusion zone from the welded structure but there are less precipitates in the interior of the original grains. The grain growth during the solution treatment at 430 °C comprises the slowly increasing stage, rapidly increasing stage, and stable stage. The network-distributed Mg{sub 24}(Gd,Y){sub 5} impedes migration of the grain boundaries, restricts grain growth in the first slowly increasing stage, and segregation of zirconium near the grain boundaries also affects migration of the grain boundaries. - Highlights: •Different quantities of precipitates are present at different location of grain. •The network-distributed Mg{sub 24}(Gd,Y){sub 5} restricts grain growth. •Segregation of Zr affects migration of grain boundaries.

36 MATERIALS SCIENCE↗

Temperature Dependence of the Lattice Parameters of Cu{sub 2 –} {sub x}Se (0.03 ≤ x ≤ 0.23) Powders Fabricated by Mechanochemical Synthesis

Abstract—The Cu{sub 2 –} {sub x}Se (0.03 ≤ x ≤ 0.23) powders fabricated by mechanochemical synthesis have been studied by X-ray diffraction. The in situ study has been carried out for the temperature dependences of the lattice parameters, the structures, and the phase compositions of the powders in the temperature range 25–350°C. The powder compositions are shown to differ from the charge compositions and are shifted to lower copper concentrations. The estimation of peak half-widths of the cubic β phase indicates an increase in the structure imperfection after the phase transition from the α phase to the β phase of Cu{sub 2 –} {sub x}Se at ~140°C. It is shown that the superpositions of the subtraction solutions (copper vacancies) and interstitials solutions (copper atoms in interstitial sites), whose proportion is changed as a function of temperature and the deviation from stoichiometry, are in the thermodynamic equilibrium in the copper selenide solid solution at room temperature. The change in the slope of the dependence of the lattice parameter of the powder Cu{sub 2 –} {sub x}Se samples on the composition (0.03 ≤ x ≤ 0.23) in the temperature range 25–350°C enables the suggestion that interstitial copper atom concentration increases with temperature and deviation from stoichiometry.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Phase formation of V{sub 2}O{sub 5}.xNb{sub 2}O{sub 5} compounds via gels and freeze-dried precursors

An X-ray powder diffraction study of the phase formation in the system V{sub 2}O{sub 5}/Nb{sub 2}O{sub 5} is performed. Freeze-dried ammonium vanadate and ammonium oxalato niobate, alkoxide-derived xerogels and a mixture of active oxides are used as precursors to compare the resulting phase composition. Thermal decomposition of the freeze-dried precursor is monitored with DTA/TG and mass spectrometry. In the quasi-binary system V{sub 2}O{sub 5}-Nb{sub 2}O{sub 5} metastable VNbO{sub 5}, V{sub 4}Nb{sub 18}O{sub 55}, VNb{sub 9}O{sub 25} and solid solutions of V{sub 2}O{sub 5} in TT-Nb{sub 2}O{sub 5} as also thermodynamically stable VNb{sub 9}O{sub 25} exist. The thermal decomposition of freeze-dried vanadate-oxalatoniobate solution allows the synthesis of all these phases in a relative simple manner. Structural relationships between an intermediate phase and the product, or, in the case of solid-state reactions, between one of the starting oxide and the product, favour the desired reaction. Therefore, the structure of a former phase influences or directs the structure of the product similar to a topotactic reaction.

36 MATERIALS SCIENCE↗

Synthesis and characterization of Cd{sub 0.7}Pb{sub 0.3}Se thin films for photoelectrochemical solar cell

Optimum composition Cd{sub 0.7}Pb{sub 0.3}Se thin films have been deposited using the chemical bath containing cadmium sulfate octahydrate, lead nitrate, tartaric acid, potassium hydroxide, ammonia, and sodium selenosulfate onto fluorine-doped tin oxide glass substrate. The various deposition parameters such as composition of reactive bath, pH of the solution, deposition temperature, deposition time, speed of rotation, etc. have been optimized for obtaining good quality film. X-ray diffraction studies revealed the polycrystalline nature of sample with the solid solution of lead (II) ions in CdSe host lattice, having a hexagonal phase structure. Scanning electron micrograph suggested that the grains were non-uniformly distributed over the substrate surface. Film composition was determined by atomic absorption spectroscopy as well as energy dispersive X-ray atomic spectroscopy. Optical absorption data showed the presence of direct transition with energy band gap 1.80 eV for the deposited thin films. The dark specific conductance of Cd{sub 0.7}Pb{sub 0.3}Se thin films was found to the order of 10{sup -6} ({omega} cm){sup -1} having n-type semiconducting nature. Photoelectrochemical characterization was carried out using sulfide/polysulfide electrolyte with 1.401% efficiency. (author)

14 SOLAR ENERGY↗

Influence of Dislocation Pinning on the Creep Rate in Aluminum

The influence of the dislocation mobility on the creep rate in aluminum has been estimated. In a steady state of creep, the dislocation mobility is varied by pinning dislocations using impurity atoms during heating. It has been shown that the change in the creep rate is proportional to the fraction of impurity atoms that migrate from the solid solution of deformed aluminum toward the dislocations.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Magnetic properties of mixed spinel BaTiO{sub 3}-NiFe{sub 2}O{sub 4} composites

Solid solution of nickel ferrite (NiFe{sub 2}O{sub 4}) and barium titanate (BaTiO{sub 3}), (100-x)BaTiO{sub 3}–(x) NiFe{sub 2}O{sub 4} has been prepared by solid state reaction. Compressive strain is developed in NiFe{sub 2}O{sub 4} due to mutual structural interaction across the interface of NiFe{sub 2}O{sub 4} and BaTiO{sub 3} phases. Quantitative analysis of X-ray diffraction and X-ray photo electron spectrum suggest mixed spinel structure of NiFe{sub 2}O{sub 4}. A systematic study of composition dependence of composite indicates BaTiO{sub 3} causes a random distribution of Fe and Ni cations among octahedral and tetrahedral sites during non-equilibrium growth of NiFe{sub 2}O{sub 4}. The degree of inversion decreases monotonically from 0.97 to 0.75 with increase of BaTiO{sub 3} content. Temperature dependence of magnetization has been analyzed by four sublattice model to describe complex magnetic exchange interactions in mixed spinel phase. Curie temperature and saturation magnetization decrease with increase of BaTiO{sub 3} concentration. Enhancement of strain and larger occupancy of Ni{sup 2+} at tetrahedral site increase coercivity up to 200 Oe. Magnetostructual coupling induced by BaTiO{sub 3} improves coercivity in NiFe{sub 2}O{sub 4}. An increase in the demagnetization and homogeneity in magnetization process in NiFe{sub 2}O{sub 4} is observed due to the interaction with diamagnetic BaTiO{sub 3}.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

ThO 2 and Th 1– x U x O 2 Nanoscale Materials and Thin Films for Nuclear Science Applications

This study investigates the dynamics and mechanisms of solution combustion synthesis (SCS) for the preparation of nanoscale ThO 2 and Th 1–x U x O 2 materials, utilizing metal nitrates (Th(NO 3 ) 4 and UO 2 (NO 3 ) 2 ) and acetylacetone (C 5 H 8 O 2 ) as reactants dissolved in a 2-methoxyethanol (C 3 H 8 O 2 ) solvent. By combining thermodynamic calculations, dynamic time–temperature profile measurements with differential scanning calorimetry (DSC) and thermogravimetric analysis (TGA), this research reveals how variations in acetylacetone concentration and uranium content influence the structural parameters of the synthesized oxides. The time–temperature measurements show that the heating rate and maximum combustion temperatures are sensitive to acetylacetone concentration. DSC-TGA results indicate shifts in exothermic peak temperatures as the uranium content changes. The complexation between thorium and acetylacetone emerges as a critical factor, impacting combustion parameters and the structural characteristics of the final products. The uniform distribution of Th and U in the Th 1–x U x O 2 solid solution and the formation of nanoscale particles with strained crystallites are considered essential for the low-temperature densification of these materials for nuclear fuel pellet applications. Additionally, high-quality ThO 2 and Th 1–x U x O 2 thin (100–150 nm) films are successfully synthesized via electrospray deposition of combustible solutions followed by a brief period of heat treatment. Furthermore, these films exhibit excellent structural and morphological uniformity, making them ideal candidates for nuclear measurements, irradiation damage studies, and investigations into the physical properties of both pure and mixed oxides.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Selective Se-for-S substitution in Cs-bearing uranyl compounds

Phase formation in the mixed sulfate-selenate aqueous system of uranyl nitrate and cesium nitrate has been investigated. Two types of crystalline compounds have been obtained and characterized using a number of experimental (single crystal XRD, FTIR, SEM) and theoretical (information-based complexity calculations, topological analysis) techniques. No miscibility gaps have been observed for Cs{sub 2}[(UO{sub 2}){sub 2}(TO{sub 4}){sub 3}] (T= S, Se), which crystallizes in tetragonal system, P-42{sub 1}m, a =9.616(1)–9.856(2), c =8.105(1)–8.159(1) Å, V =749.6(2)–792.5(3) Å{sup 3}. Nine phases with variable amount of S and Se have been structurally characterized. The structures of the Cs{sub 2}[(UO{sub 2}){sub 2}(TO{sub 4}){sub 3}] (T= S, Se) compounds are based upon the [(UO{sub 2}){sub 2}(TO{sub 4}){sub 3}]{sup 2-} layers of corner-sharing uranyl pentagonal bipyramids and TO{sub 4} tetrahedra. The layers contain two types of tetrahedral sites: T1 (3-connected, i.e. having three O atoms shared by adjacent uranyl polyhedra) and T2 (4-connected). The Se-for-S substitution in tetrahedral sites is highly selective with smaller S{sup 6+} cation showing a strong preference for the more tightly bonded T2 site. Crystallization in the pure Se system starts with the formation of Cs{sub 2}[(UO{sub 2})(SeO{sub 4}){sub 2}(H{sub 2}O)](H{sub 2}O) crystals, its subsequent dissolution and formation of Cs{sub 2}[(UO{sub 2}){sub 2}(SeO{sub 4}){sub 3}]. The information-based structural complexity calculations for these two phases support the rule that more topologically complex structures form at the latest stages of crystallization. - Graphical abstract: Nine phases representing the Cs{sub 2}[(UO{sub 2}){sub 2}(TO{sub 4}){sub 3}] (T= S, Se) solid solution series with variable amount of S and Se have been prepared by isothermal evaporation from aqueous solutions and characterized using a number of experimental and theoretical techniques. No immiscibility is observed between the pure sulfate and selenate compounds. The Se-for-S substitution in tetrahedral sites is highly selective with smaller S{sup 6+} cation showing a strong preference for the more tightly bonded 4-connected site. - Highlights: • Single crystals of novel mixed sulfate-selenate uranyl oxysalts were prepared by evaporation method. • Topological analysis and information-based complexity calculations were used for structure description. • The selective Se-for-S substitution was observed. • Evolution of phase formation in the aqueous Cs{sup +}–UO{sub 2}{sup 2+}–SO{sub 4}{sup 2–}–SeO{sub 4}{sup 2–} system was analyzed.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

New Effects in the Poly-N-Vinylcaprolactam/Titanium(IV) Oxides Nanocomposite System and Their Nature

Nanocomposites based on poly-N-vinylcaprolactam (PVC), characterized by different drying temperatures of aqueous PVC solution at 25°С (PVC25) and 40°С (PVC40), with titanium(IV) oxide nanoparticles (TONs) (η-phase (TP: TiO{sub 2–x} · mH{sub 2}O) with a superstructure to the anatase structure and ordered solid solution with partial replacement of oxygen atoms in the η-phase with peroxo group O {sub 2}{sup 2–} (PP: TiO{sub x}(O{sub 2}){sub 2–x} · nH{sub 2}O)) have been obtained for the first time and characterized by X-ray diffraction and IR spectroscopy. It is found that a common feature of TP/PVC and PP/PVC obtained by dry mixing and grinding is the decrease in the number of water molecules for TP and PP in the interlayer space of the structure and their attachment to the PVC amide groups; the differences are related to the specificity of PVC behavior in these systems: mechanodestruction of PVC in PP/PVC40 and different numbers of water molecules in PVC25 and PVC40.

36 MATERIALS SCIENCE↗