Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “software package”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,315 records · Page 73
All sourcesNASA NTRSDOE OSTI
NASA NTRS1984

NASA guidelines for assuring the adequacy and appropriateness of security safeguards in sensitive applications

The Office of Management and Budget (OMB) Circular A-71, transmittal Memorandum No. 1, requires that each agency establish a management control process to assure that appropriate administrative, physical and technical safeguards are incorporated into all new computer applications. In addition to security specifications, the management control process should assure that the safeguards are adequate for the application. The security activities that should be integral to the system development process are examined. The software quality assurance process to assure that adequate and appropriate controls are incorporated into sensitive applications is also examined. Security for software packages is also discussed.

Tompkins, F. G.↗
NASA NTRS1985

Effects of coronal disturbances on the ionization state of the solar wind

A theoretical investigation of the relationship between physical conditions in coronal disturbances and the ionization states of the resulting perturbed solar wind was conducted. Available measurements of active solar wind associated with solar flares often show an enhanced degree of ionization (e.g., Fe(+17)), implying that the measured solar wind material is flare-heated at its coronal source. In contrast, other active solar wind flows sometimes show anomalously low degrees of ionization (e.g., He(+)), implying that some solar material is expelled from the corona without ever reaching coronal temperatures. The effects of impulsive heat and/or momentum addition in the corona on the hydrodynamics and ionization state of the corona and solar wind were studied. One of the primary objectives of the current grant was the development of a software package suitable for: (1) generating models for the effects of impulsive heat and/or momentum deposition on plasma temperatures, densities and flow velocities; and (2) calculating the ionization state of the solar wind as a function of the location, duration and magnitude of heat and/or momentum deposition.

Withbroe, G. L.↗
NASA NTRS1985

Geophysical interpretation of Venus gravity data

The investigation of the subsurface mass distribution of Venus through the analysis of the data from Pioneer Venus Orbiter (PVO) is presented. The Doppler tracking data was used to map the gravitational potential, which was compared to the topographic data from the PVO radar (ORAD). In order to obtain an unbiased comparison, the topography obtained from the PVO-ORAD was filtered to introduce distortions which are the same as those of our gravity models. The last major software package that was required in order to determine the spectral admittance Z (lambda) was used. This package solves the forward problem: given the topography and its density, and assuming no compensation, find the resulting spacecraft acceleration along a given nominal trajectory. The filtered topography is obtained by processing these accelerations in the same way (i.e., with the same geophysical inverter) as the Doppler-rate data that we use to estimate the gravity maps.

Reasenberg, R. D.↗
NASA NTRS1985

Analysis of Jovian decametric data: Study of radio emission mechanisms

Data gathered by the Voyager 1 and Voyager 2 Planetary Radio Astronomy Experiments (PRA) are unique in many ways including their frequency range, time resolution, polarization information and geometric characteristics. Studies of rapidly varying phenomena have thus far been hampered by paper display techniques which require large amounts of paper to exploit the full PRA time resolution. A software package capable of effectively displaying full 6s resolution PRA dynamic spectra on a high quality video monitor while compensating for the aforementioned variations was developed. The most striking phenomena revealed by the new display techniques is called Modulated Spectral Activity (MSA) because of its appearance in dynamic spectra as a series at least two parallel emission bands which drift back and forth in frequency on time scales of tens of seconds. In an attempt to locate and understand the MSA source mechanism, a catalogue has been compiled of the start and end of all known MSA events.

Staelin, D. H.↗
NASA NTRS1985

Estimation of finite mixtures using the empirical characteristic function

A problem which occurs in analyzing LANDSAT scenes is the problem of separating the components of a finite mixture of several distinct probability distributions. A review of the literature indicates this is a problem which occurs in many disciplines, such as engineering, biology, physiology and economics. Many approaches to this problem have appeared in the literature; however, most are very restrictive in their assumptions or have met with only a limited degree of success when applied to realistic situations. A proceudre is investigated with combines the k-L procedure of (Feurverger and McDunnough, 1981) with the MAICE procedure of (Akaike, 1974). The feasibility of this approach is being investigated numerically via the development of a computer software package enabling a simulation study and comparison with other procedures.

Anderson, C.↗
NASA NTRS1985

Comparison of GSFC and JPL VLBI modeling software: Benchmark

The Very Long Base Interferometry. The VLBI modeling software packages CALC 6.0 (GSFC) and MASTERFIT (JPL) are compared in some detail. Theoretical model delays are calculated for a set of 120 fictitious observations which involve a variety of sources, baselines, and antennas. Discrepancies between the total delays given by the two programs are of the order of 2 cm (RMS). The modeling of antenna offsets appears to account for approximately half of this difference. Relativistic bending contributions to the delay differ by 3 cm (RMS), and the there appears to be some mutual cancellation of errors involving antenna offsets, bending, and the effects of the two different Solar System ephemerides employed by CALC and MASTERFIT. This cancellation has not been completely characterized here.

Sovers, O. J.↗
NASA NTRS1983

Determination of the utility of remote sensing data for land use/cover analysis in the lower Appalachia region: Assessing the utility of remote sensing data for archeological site recognition

Thematic Mapper Simulator (TMS) data were gathered by NASA/ERL over a portion of the lower Ohio River and the middle Mississippi River valleys on April 11, 1982. CIR imagery accompanied the 10 and 30 meter resolution TMS data sets. This area is somewhat unique archeologically as there exists a concentration of sites with major features such as mounds, earthworks, and villages. It was the primary purpose of this study to determine the utility of TMS data in identifying signatures which are distinctly archeological. TMS data were processed using the NASA/ERL software package ELAS. No signatures that were distinctly archeological were detected, due in large part to the complexity of the land cover and land use practices. However, as more sophisticated classification techniques were employed, the classes which were related to archeological features were narrowed. TMS data could certainly be of assistance to a trained archeologist/interpreter in narrowing an area which has to be field-surveyed as anomalous features can be recognized within a particular environmental context.

Weber, N. V.↗
NASA NTRS1985

Response time for multilayered platinum resistance thermometers

Response time constants for several multilayered temperature transducers were determined numerically by using Martin Marietta's MITAS software package which is available at NASA Langley Research Center. Present results were found in close agreement with the solutions reported in the literature, thus, the capability of MITAS was justified. On the basis of experiences gained, the MITAS is recommended for use in predicting the response time constants of sensors by an in-situ technique.

Pandey, D. K.↗
NASA NTRS1986

Burner liner thermal-structural load modeling

The software package Transfer Analysis Code to Interface Thermal/Structural Problems (TRANCITS) was developed. The TRANCITS code is used to interface temperature data between thermal and structural analytical models. The use of this transfer module allows the heat transfer analyst to select the thermal mesh density and thermal analysis code best suited to solve the thermal problem and gives the same freedoms to the stress analyst, without the efficiency penalties associated with common meshes and the accuracy penalties associated with the manual transfer of thermal data.

Maffeo, R.↗
NASA NTRS1986

Space station common module thermal management: Design and construction of a test bed

In this project, a thermal test bed was designed, simulated, and planned for construction. The thermal system features interior and exterior thermal loads and interfacing with the central-radiator thermal bus. Components of the test bed include body mounted radiator loop with interface heat exchangers (600 Btu/hr); an internal loop with cabin air-conditioning and cold plates (3400 Btu/hr); interface heat exchangers to the central bus (13,000 Btu/hr); and provisions for new technology including advanced radiators, thermal storage, and refrigeration. The apparatus will be mounted in a chamber, heated with lamps, and tested in a vacuum chamber with LN2-cooled walls. Simulation of the test bed was accomplished using a DEC PRO 350 computer and the software package TK! olver. Key input variables were absorbed solar radiation and cold plate loads. The results indicate temperatures on the two loops will be nominal when the radiation and cold plate loads are in the range of 25% to 75% of peak loads. If all loads fall to zero, except the cabin air system which was fixed, the radiator fluid will drop below -100 F and may cause excessive pressure drop. If all loads reach 100%, the cabin air temperature could rise to 96 F.

Barile, R. G.↗
NASA NTRS1986

A study of the stress wave factor technique for nondestructive evaluation of composite materials

The acousto-ultrasonic method of nondestructive evaluation is an extremely sensitive means of assessing material response. Efforts continue to complete the understanding of this method. In order to achieve the full sensitivity of the technique, extreme care must be taken in its performance. This report provides an update of the efforts to advance the understanding of this method and to increase its application to the nondestructive evaluation of composite materials. Included are descriptions of a novel optical system that is capable of measuring in-plane and out-of-plane displacements, an IBM PC-based data acquisition system, an extensive data analysis software package, the azimuthal variation of acousto-ultrasonic behavior in graphite/epoxy laminates, and preliminary examination of processing variation in graphite-aluminum tubes.

Sarrafzadeh-Khoee, A.↗
NASA NTRS1986

Demonstration of new PCSD capabilities

The new, more flexible and more friendly graphics capabilities to be available in later releases of the Pilot Climate Data System were demonstrated. The LIMS-LAMAT data set was chosen to illustrate these new capabilities. Pseudocolor and animation were used to represent the third and fourth dimensions, expanding the analytical capabilities available through the traditional two-dimensional x-y plot. In the new version, variables for the axes are chosen by scrolling through viable selections. This scrolling feature is a function of the new user interface customization. The new graphics are extremely user friendly and should free the scientist to look at data and converse with it, without doing any programming. The system is designed to rapidly plot any variable versus any other variable and animate by any variable. Any one plot in itself is not extraordinary; however, the fact that a user can generate the plots instead of a programmer distinguishes the graphics capabilities of the PCDS from other software packages. In addition, with the new CDF design, the system will become more generic, and the new graphics will become much more rigorous in the area of correlative studies.

Gough, M.↗
NASA NTRS1986

Search and retrieval of office files using dBASE 3

Described is a method of automating the office files retrieval process using a commercially available software package (dBASE III). The resulting product is a menu-driven computer program which requires no computer skills to operate. One part of the document is written for the potential user who has minimal computer experience and uses sample menu screens to explain the program; while a second part is oriented towards the computer literate individual and includes rather detailed descriptions of the methodology and search routines. Although much of the programming techniques are explained, this document is not intended to be a tutorial on dBASE III. It is hoped that the document will serve as a stimulus for other applications of dBASE III.

Breazeale, W. L.↗
NASA NTRS1985

Interactive software for spectral assignment

A new interactive computer software package for eigenvalue/eigenvector assignment using constant state feedback is described. The package consists of ten subprograms, each associated with a specific design objective, accessible from a main control program. Using this package, primary design objectives of assigning eigenvalues and approximating eigenvectors are first achieved. Then secondary design objectives, including modification of specific eigenvector components, reduction in specified elements of the feedback gain matrix, and reduction in eigensystem sensitivity to changes in plant parameters, are addressed. These secondary objectives are achieved by a systematic modification of the assigned eigenvectors in a small region about the initial assignment. In addition, the program implements the use of spectral assignment procedures with reduced-order system models. Program modes are described and illustrated by numerical examples.

Mielke, R. R.↗
NASA NTRS1985

A computer analysis program for interfacing thermal and structural codes

A software package has been developed to transfer three-dimensional transient thermal information accurately, efficiently, and automatically from a heat transfer analysis code to a structural analysis code. The code is called three-dimensional TRansfer ANalysis Code to Interface Thermal and Structural codes, or 3D TRANCITS. TRANCITS has the capability to couple finite difference and finite element heat transfer analysis codes to linear and nonlinear finite element structural analysis codes. TRANCITS currently supports the output of SINDA and MARC heat transfer codes directly. It will also format the thermal data output directly so that it is compatible with the input requirements of the NASTRAN and MARC structural analysis codes. Other thermal and structural codes can be interfaced using the transfer module with the neutral heat transfer input file and the neutral temperature output file. The transfer module can handle different elemental mesh densities for the heat transfer analysis and the structural analysis.

Thompson, R. L.↗
NASA NTRS1985

Prospects for astrometry with the Hubble Space Telescope

The Hubble Space Telescope (HST), a large optical telescope having an aperture of 2.4 meters and a length of 8.8 meters, is being developed by NASA. This telescope will be placed into earth orbit by the Space Shuttle. Astrometric observations with the HST are made using a Fine Guidance Sensor which is capable of measuring the position of one object relative to another with an accuracy of + or - 0.002 arcseconds. The astrometric user of HST will be provided with an Astrometric Data Reduction Software package. The variety of astrometric problems to be investigated with HST is discussed.

Jefferys, W. H.↗
NASA NTRS1985

Time optimal robotic manipulator motions and work places for point to point tasks

High productivity requires that manipulators perform complex tasks quickly. Recently, optimal control algorithms have been developed which enable manipulators to move quickly, but only for simple motions. A method is presented here which combines simple time optimal motions in an optimal manner to yield the minimum time motions for an important class of complex manipulator tasks composed of point to point moves, such as assembly, electronic component insertion and spot welding. This method can also be used to design manipulator actions and work places so that tasks can be completd in minimum time. The method has been implemented in a CAD software package. Examples are presented which show the methods effectiveness.

Dubowsky, S.↗
NASA NTRS1986

Precise GPS orbit determination results from 1985 field tests

Data from three different receiver types have been used to obtain precise orbits for the satellites of the Global Positioning System (GPS). The data were collected during the 1985 March-April GPS experiment to test and validate GPS techniques for precision orbit determination and geodesy. A new software package developed at the Jet Propulsion Laboratory (JPL), GIPSY (GPS Inferred Positioning SYstem), was used to process the data. To assess orbit accuracy, solutions are compared using integrated doppler data from various different receiver types, different fiducial sites, and independent data arcs, including one spanning six days. From these intercomparisons, orbit accuracy for a well-tracked GPS satellite of three meters in altitude and about five meters in each of down and cross-track components are inferred.

Lichten, S. M.↗